| Message ID | 20211220110630.3521121-12-s.hauer@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/rockchip: RK356x VOP2 support | expand |
On Mon, 20 Dec 2021 12:06:19 +0100, Sascha Hauer wrote: > The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566. > The binding differs slightly from the existing VOP binding, so add a new > binding file for it. > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > .../display/rockchip/rockchip-vop2.yaml | 146 ++++++++++++++++++ > 1 file changed, 146 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: ports: Unevaluated properties are not allowed ('port@0', 'port@1', 'port@2' were unexpected) From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1570971 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Mon, Dec 20, 2021 at 12:06:19PM +0100, Sascha Hauer wrote: > The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566. > The binding differs slightly from the existing VOP binding, so add a new > binding file for it. > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > .../display/rockchip/rockchip-vop2.yaml | 146 ++++++++++++++++++ > 1 file changed, 146 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml > new file mode 100644 > index 0000000000000..df14d5aa85c85 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml > @@ -0,0 +1,146 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Rockchip SoC display controller (VOP2) > + > +description: > + VOP2 (Video Output Processor v2) is the display controller for the Rockchip > + series of SoCs which transfers the image data from a video memory > + buffer to an external LCD interface. > + > +maintainers: > + - Sandy Huang <hjc@rock-chips.com> > + - Heiko Stuebner <heiko@sntech.de> > + > +properties: > + compatible: > + enum: > + - rockchip,rk3566-vop > + - rockchip,rk3568-vop > + > + reg: > + minItems: 1 > + items: > + - description: > + Must contain one entry corresponding to the base address and length > + of the register space. > + - description: > + Can optionally contain a second entry corresponding to > + the CRTC gamma LUT address. > + > + interrupts: > + maxItems: 1 > + description: > + The VOP interrupt is shared by several interrupt sources, such as > + frame start (VSYNC), line flag and other status interrupts. > + > + clocks: > + items: > + - description: Clock for ddr buffer transfer. > + - description: Clock for the ahb bus to R/W the phy regs. > + - description: Pixel clock for video port 0. > + - description: Pixel clock for video port 1. > + - description: Pixel clock for video port 2. > + > + clock-names: > + items: > + - const: aclk_vop > + - const: hclk_vop _vop is redundant. > + - const: dclk_vp0 > + - const: dclk_vp1 > + - const: dclk_vp2 > + > + rockchip,grf: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + Phandle to GRF regs used for misc control > + > + ports: > + $ref: /schemas/graph.yaml#/properties/port s/port/ports/ > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Output endpoint of VP0 > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Output endpoint of VP1 > + > + port@: port@2 > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Output endpoint of VP2 > + > + assigned-clocks: true > + > + assigned-clock-rates: true > + > + assigned-clock-parents: true These are automatically added. > + > + iommus: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/rk3568-cru.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/rk3568-power.h> > + bus { > + #address-cells = <2>; > + #size-cells = <2>; > + vop: vop@fe040000 { > + compatible = "rockchip,rk3568-vop"; > + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; > + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru ACLK_VOP>, > + <&cru HCLK_VOP>, > + <&cru DCLK_VOP0>, > + <&cru DCLK_VOP1>, > + <&cru DCLK_VOP2>; > + clock-names = "aclk_vop", > + "hclk_vop", > + "dclk_vp0", > + "dclk_vp1", > + "dclk_vp2"; > + power-domains = <&power RK3568_PD_VO>; > + iommus = <&vop_mmu>; > + vop_out: ports { > + #address-cells = <1>; > + #size-cells = <0>; > + vp0: port@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + vp1: port@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + vp2: port@2 { > + reg = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + }; > + }; > -- > 2.30.2 > >
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml new file mode 100644 index 0000000000000..df14d5aa85c85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP2) + +description: + VOP2 (Video Output Processor v2) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3566-vop + - rockchip,rk3568-vop + + reg: + minItems: 1 + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Clock for the ahb bus to R/W the phy regs. + - description: Pixel clock for video port 0. + - description: Pixel clock for video port 1. + - description: Pixel clock for video port 2. + + clock-names: + items: + - const: aclk_vop + - const: hclk_vop + - const: dclk_vp0 + - const: dclk_vp1 + - const: dclk_vp2 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to GRF regs used for misc control + + ports: + $ref: /schemas/graph.yaml#/properties/port + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP1 + + port@: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP2 + + assigned-clocks: true + + assigned-clock-rates: true + + assigned-clock-parents: true + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3568-power.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + vop: vop@fe040000 { + compatible = "rockchip,rk3568-vop"; + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>; + clock-names = "aclk_vop", + "hclk_vop", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2"; + power-domains = <&power RK3568_PD_VO>; + iommus = <&vop_mmu>; + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + };
The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566. The binding differs slightly from the existing VOP binding, so add a new binding file for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- .../display/rockchip/rockchip-vop2.yaml | 146 ++++++++++++++++++ 1 file changed, 146 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml