diff mbox series

[2/3] media: i2c: max9286: Add support for port regulators

Message ID 20211216220946.20771-3-laurent.pinchart+renesas@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series media: i2c: max9286: Small new features | expand

Commit Message

Laurent Pinchart Dec. 16, 2021, 10:09 p.m. UTC
From: Thomas Nizan <tnizan@witekio.com>

Allow users to use one PoC regulator per port, instead of a global
regulator.

The properties '^port[0-3]-poc-supply$' in the DT node are used to
indicate the regulators for individual ports.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++-----
 1 file changed, 98 insertions(+), 14 deletions(-)

Comments

Jacopo Mondi Dec. 17, 2021, 11:08 a.m. UTC | #1
Hi Laurent,

On Fri, Dec 17, 2021 at 12:09:45AM +0200, Laurent Pinchart wrote:
> From: Thomas Nizan <tnizan@witekio.com>
>
> Allow users to use one PoC regulator per port, instead of a global
> regulator.
>
> The properties '^port[0-3]-poc-supply$' in the DT node are used to
> indicate the regulators for individual ports.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

These patches will badly conflic with the gpio-poc series :(

> ---
>  drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++-----
>  1 file changed, 98 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index 7c663fd587bb..fa2f6a823fe6 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -136,8 +136,10 @@
>  #define MAX9286_SRC_PAD			4
>
>  struct max9286_source {
> +	unsigned int index;

Can't you use the to_index() macro ?

>  	struct v4l2_subdev *sd;
>  	struct fwnode_handle *fwnode;
> +	struct regulator *regulator;
>  };
>
>  struct max9286_asd {
> @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv)
>  	return ret;
>  }
>
> +static int max9286_poc_power_on(struct max9286_priv *priv)
> +{
> +	struct max9286_source *source;
> +	unsigned int enabled = 0;
> +	int ret;
> +
> +	/* Enable the global regulator if available. */
> +	if (priv->regulator)
> +		return regulator_enable(priv->regulator);
> +
> +	/* Otherwise use the per-port regulators. */
> +	for_each_source(priv, source) {
> +		ret = regulator_enable(source->regulator);
> +		if (ret < 0)
> +			goto error;
> +
> +		enabled |= BIT(source->index);
> +	}
> +
> +	return 0;
> +
> +error:
> +	for_each_source(priv, source) {
> +		if (enabled & BIT(source->index))
> +			regulator_disable(source->regulator);

I would if a regulator can be unconditionally disabled...

> +	}
> +
> +	return ret;
> +}
> +
> +static void max9286_poc_power_off(struct max9286_priv *priv)
> +{
> +	struct max9286_source *source;
> +
> +	if (priv->regulator) {
> +		regulator_disable(priv->regulator);
> +		return;
> +	}
> +
> +	for_each_source(priv, source)
> +		regulator_disable(source->regulator);
> +}
> +
>  static int max9286_init(struct device *dev)
>  {
>  	struct max9286_priv *priv;
> @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev)
>  	priv = i2c_get_clientdata(client);
>
>  	/* Enable the bus power. */
> -	ret = regulator_enable(priv->regulator);
> +	ret = max9286_poc_power_on(priv);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "Unable to turn PoC on\n");
> +		dev_err(dev, "Unable to turn PoC on\n");
>  		return ret;
>  	}
>
> @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev)
>  err_v4l2_register:
>  	max9286_v4l2_unregister(priv);
>  err_regulator:
> -	regulator_disable(priv->regulator);
> +	max9286_poc_power_off(priv);
>
>  	return ret;
>  }
> @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv)
>  		}
>
>  		source = &priv->sources[ep.port];
> +		source->index = ep.port;
>  		source->fwnode = fwnode_graph_get_remote_endpoint(
>  						of_fwnode_handle(node));
>  		if (!source->fwnode) {
> @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv)
>  	return 0;
>  }
>
> +static int max9286_get_poc_supplies(struct max9286_priv *priv)
> +{
> +	struct device *dev = &priv->client->dev;
> +	struct max9286_source *source;
> +
> +	/*
> +	 * Start by getting the global regulator. Usage of the exclusive API is
> +	 * required to receive an error in case the supply isn't specified in
> +	 * the device tree.
> +	 */
> +	priv->regulator = devm_regulator_get_exclusive(dev, "poc");

doesn't get_optional() return -ENODEV if there's no such regulator too
without locking the usage of the regulator ? Oh wait, maybe we want
exclusive locking ? :)

> +	if (!IS_ERR(priv->regulator))
> +		return 0;
> +
> +	if (PTR_ERR(priv->regulator) != -ENODEV) {
> +		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> +			dev_err(dev, "Unable to get PoC regulator: %ld\n",
> +				PTR_ERR(priv->regulator));
> +		return PTR_ERR(priv->regulator);
> +	}
> +
> +	/* If there's no global regulator, get per-port regulators. */
> +	dev_dbg(dev,
> +		"No global PoC regulator, looking for per-port regulators\n");
> +	priv->regulator = NULL;
> +
> +	for_each_source(priv, source) {
> +		char name[10];
> +
> +		snprintf(name, sizeof(name), "port%u-poc", source->index);
> +		source->regulator = devm_regulator_get_exclusive(dev, name);

I guess the fact we don't have a fixed number of sources makes it even
harder to use the _bulk version of the regulators API...

> +		if (IS_ERR(source->regulator)) {
> +			if (PTR_ERR(source->regulator) != -EPROBE_DEFER)
> +				dev_err(dev,
> +					"Unable to get port %u PoC regulator: %ld\n",
> +					source->index,
> +					PTR_ERR(source->regulator));
> +			return PTR_ERR(source->regulator);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int max9286_probe(struct i2c_client *client)
>  {
>  	struct max9286_priv *priv;
> @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client)
>  	if (ret)
>  		goto err_powerdown;
>
> -	priv->regulator = devm_regulator_get(&client->dev, "poc");
> -	if (IS_ERR(priv->regulator)) {
> -		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> -			dev_err(&client->dev,
> -				"Unable to get PoC regulator (%ld)\n",
> -				PTR_ERR(priv->regulator));
> -		ret = PTR_ERR(priv->regulator);
> -		goto err_powerdown;
> -	}
> -
>  	ret = max9286_parse_dt(priv);
> +	if (ret)
> +		goto err_cleanup_dt;
> +
> +	ret = max9286_get_poc_supplies(priv);
>  	if (ret)
>  		goto err_powerdown;

I think the error path is wrong, you should cleanup_dt here.

Thanks
   j

>
> @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client)
>
>  	max9286_v4l2_unregister(priv);
>
> -	regulator_disable(priv->regulator);
> +	max9286_poc_power_off(priv);
>
>  	gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
>
> --
> Regards,
>
> Laurent Pinchart
>
Jacopo Mondi Dec. 17, 2021, 2 p.m. UTC | #2
Hello again

On Fri, Dec 17, 2021 at 12:09:45AM +0200, Laurent Pinchart wrote:
> From: Thomas Nizan <tnizan@witekio.com>
>
> Allow users to use one PoC regulator per port, instead of a global
> regulator.
>
> The properties '^port[0-3]-poc-supply$' in the DT node are used to
> indicate the regulators for individual ports.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++-----
>  1 file changed, 98 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index 7c663fd587bb..fa2f6a823fe6 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -136,8 +136,10 @@
>  #define MAX9286_SRC_PAD			4
>
>  struct max9286_source {
> +	unsigned int index;
>  	struct v4l2_subdev *sd;
>  	struct fwnode_handle *fwnode;
> +	struct regulator *regulator;
>  };
>
>  struct max9286_asd {
> @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv)
>  	return ret;
>  }
>
> +static int max9286_poc_power_on(struct max9286_priv *priv)
> +{
> +	struct max9286_source *source;
> +	unsigned int enabled = 0;
> +	int ret;
> +
> +	/* Enable the global regulator if available. */
> +	if (priv->regulator)
> +		return regulator_enable(priv->regulator);
> +
> +	/* Otherwise use the per-port regulators. */
> +	for_each_source(priv, source) {
> +		ret = regulator_enable(source->regulator);
> +		if (ret < 0)
> +			goto error;
> +
> +		enabled |= BIT(source->index);
> +	}
> +
> +	return 0;
> +
> +error:
> +	for_each_source(priv, source) {
> +		if (enabled & BIT(source->index))
> +			regulator_disable(source->regulator);
> +	}
> +
> +	return ret;
> +}
> +
> +static void max9286_poc_power_off(struct max9286_priv *priv)
> +{
> +	struct max9286_source *source;
> +
> +	if (priv->regulator) {
> +		regulator_disable(priv->regulator);
> +		return;
> +	}
> +
> +	for_each_source(priv, source)
> +		regulator_disable(source->regulator);
> +}
> +
>  static int max9286_init(struct device *dev)
>  {
>  	struct max9286_priv *priv;
> @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev)
>  	priv = i2c_get_clientdata(client);
>
>  	/* Enable the bus power. */
> -	ret = regulator_enable(priv->regulator);
> +	ret = max9286_poc_power_on(priv);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "Unable to turn PoC on\n");
> +		dev_err(dev, "Unable to turn PoC on\n");
>  		return ret;
>  	}
>
> @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev)
>  err_v4l2_register:
>  	max9286_v4l2_unregister(priv);
>  err_regulator:
> -	regulator_disable(priv->regulator);
> +	max9286_poc_power_off(priv);
>
>  	return ret;
>  }
> @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv)
>  		}
>
>  		source = &priv->sources[ep.port];
> +		source->index = ep.port;
>  		source->fwnode = fwnode_graph_get_remote_endpoint(
>  						of_fwnode_handle(node));
>  		if (!source->fwnode) {
> @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv)
>  	return 0;
>  }
>
> +static int max9286_get_poc_supplies(struct max9286_priv *priv)
> +{
> +	struct device *dev = &priv->client->dev;
> +	struct max9286_source *source;
> +
> +	/*
> +	 * Start by getting the global regulator. Usage of the exclusive API is
> +	 * required to receive an error in case the supply isn't specified in
> +	 * the device tree.
> +	 */
> +	priv->regulator = devm_regulator_get_exclusive(dev, "poc");
> +	if (!IS_ERR(priv->regulator))
> +		return 0;
> +
> +	if (PTR_ERR(priv->regulator) != -ENODEV) {
> +		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)

Use of the dev_err_probe() intoduced by a787e5400a1ceeb0ef92d71ec43aeb35b1fa1334
would save you from open-coding this

Thanks
  j

> +			dev_err(dev, "Unable to get PoC regulator: %ld\n",
> +				PTR_ERR(priv->regulator));
> +		return PTR_ERR(priv->regulator);
> +	}
> +
> +	/* If there's no global regulator, get per-port regulators. */
> +	dev_dbg(dev,
> +		"No global PoC regulator, looking for per-port regulators\n");
> +	priv->regulator = NULL;
> +
> +	for_each_source(priv, source) {
> +		char name[10];
> +
> +		snprintf(name, sizeof(name), "port%u-poc", source->index);
> +		source->regulator = devm_regulator_get_exclusive(dev, name);
> +		if (IS_ERR(source->regulator)) {
> +			if (PTR_ERR(source->regulator) != -EPROBE_DEFER)
> +				dev_err(dev,
> +					"Unable to get port %u PoC regulator: %ld\n",
> +					source->index,
> +					PTR_ERR(source->regulator));
> +			return PTR_ERR(source->regulator);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int max9286_probe(struct i2c_client *client)
>  {
>  	struct max9286_priv *priv;
> @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client)
>  	if (ret)
>  		goto err_powerdown;
>
> -	priv->regulator = devm_regulator_get(&client->dev, "poc");
> -	if (IS_ERR(priv->regulator)) {
> -		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> -			dev_err(&client->dev,
> -				"Unable to get PoC regulator (%ld)\n",
> -				PTR_ERR(priv->regulator));
> -		ret = PTR_ERR(priv->regulator);
> -		goto err_powerdown;
> -	}
> -
>  	ret = max9286_parse_dt(priv);
> +	if (ret)
> +		goto err_cleanup_dt;
> +
> +	ret = max9286_get_poc_supplies(priv);
>  	if (ret)
>  		goto err_powerdown;
>
> @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client)
>
>  	max9286_v4l2_unregister(priv);
>
> -	regulator_disable(priv->regulator);
> +	max9286_poc_power_off(priv);
>
>  	gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
>
> --
> Regards,
>
> Laurent Pinchart
>
Laurent Pinchart Dec. 17, 2021, 4:41 p.m. UTC | #3
Hi Jacopo,

On Fri, Dec 17, 2021 at 12:08:08PM +0100, Jacopo Mondi wrote:
> On Fri, Dec 17, 2021 at 12:09:45AM +0200, Laurent Pinchart wrote:
> > From: Thomas Nizan <tnizan@witekio.com>
> >
> > Allow users to use one PoC regulator per port, instead of a global
> > regulator.
> >
> > The properties '^port[0-3]-poc-supply$' in the DT node are used to
> > indicate the regulators for individual ports.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> These patches will badly conflic with the gpio-poc series :(

I don't mind rebasing.

> > ---
> >  drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++-----
> >  1 file changed, 98 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> > index 7c663fd587bb..fa2f6a823fe6 100644
> > --- a/drivers/media/i2c/max9286.c
> > +++ b/drivers/media/i2c/max9286.c
> > @@ -136,8 +136,10 @@
> >  #define MAX9286_SRC_PAD			4
> >
> >  struct max9286_source {
> > +	unsigned int index;
> 
> Can't you use the to_index() macro ?

I think I can, indeed.

> >  	struct v4l2_subdev *sd;
> >  	struct fwnode_handle *fwnode;
> > +	struct regulator *regulator;
> >  };
> >
> >  struct max9286_asd {
> > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv)
> >  	return ret;
> >  }
> >
> > +static int max9286_poc_power_on(struct max9286_priv *priv)
> > +{
> > +	struct max9286_source *source;
> > +	unsigned int enabled = 0;
> > +	int ret;
> > +
> > +	/* Enable the global regulator if available. */
> > +	if (priv->regulator)
> > +		return regulator_enable(priv->regulator);
> > +
> > +	/* Otherwise use the per-port regulators. */
> > +	for_each_source(priv, source) {
> > +		ret = regulator_enable(source->regulator);
> > +		if (ret < 0)
> > +			goto error;
> > +
> > +		enabled |= BIT(source->index);
> > +	}
> > +
> > +	return 0;
> > +
> > +error:
> > +	for_each_source(priv, source) {
> > +		if (enabled & BIT(source->index))
> > +			regulator_disable(source->regulator);
> 
> I would if a regulator can be unconditionally disabled...

They're reference-counted, so they should only be disabled here if they
have been enabled above.

> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static void max9286_poc_power_off(struct max9286_priv *priv)
> > +{
> > +	struct max9286_source *source;
> > +
> > +	if (priv->regulator) {
> > +		regulator_disable(priv->regulator);
> > +		return;
> > +	}
> > +
> > +	for_each_source(priv, source)
> > +		regulator_disable(source->regulator);
> > +}
> > +
> >  static int max9286_init(struct device *dev)
> >  {
> >  	struct max9286_priv *priv;
> > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev)
> >  	priv = i2c_get_clientdata(client);
> >
> >  	/* Enable the bus power. */
> > -	ret = regulator_enable(priv->regulator);
> > +	ret = max9286_poc_power_on(priv);
> >  	if (ret < 0) {
> > -		dev_err(&client->dev, "Unable to turn PoC on\n");
> > +		dev_err(dev, "Unable to turn PoC on\n");
> >  		return ret;
> >  	}
> >
> > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev)
> >  err_v4l2_register:
> >  	max9286_v4l2_unregister(priv);
> >  err_regulator:
> > -	regulator_disable(priv->regulator);
> > +	max9286_poc_power_off(priv);
> >
> >  	return ret;
> >  }
> > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv)
> >  		}
> >
> >  		source = &priv->sources[ep.port];
> > +		source->index = ep.port;
> >  		source->fwnode = fwnode_graph_get_remote_endpoint(
> >  						of_fwnode_handle(node));
> >  		if (!source->fwnode) {
> > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv)
> >  	return 0;
> >  }
> >
> > +static int max9286_get_poc_supplies(struct max9286_priv *priv)
> > +{
> > +	struct device *dev = &priv->client->dev;
> > +	struct max9286_source *source;
> > +
> > +	/*
> > +	 * Start by getting the global regulator. Usage of the exclusive API is
> > +	 * required to receive an error in case the supply isn't specified in
> > +	 * the device tree.
> > +	 */
> > +	priv->regulator = devm_regulator_get_exclusive(dev, "poc");
> 
> doesn't get_optional() return -ENODEV if there's no such regulator too
> without locking the usage of the regulator ? Oh wait, maybe we want
> exclusive locking ? :)

No, you're right, I'll use an optional get.

> > +	if (!IS_ERR(priv->regulator))
> > +		return 0;
> > +
> > +	if (PTR_ERR(priv->regulator) != -ENODEV) {
> > +		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> > +			dev_err(dev, "Unable to get PoC regulator: %ld\n",
> > +				PTR_ERR(priv->regulator));
> > +		return PTR_ERR(priv->regulator);
> > +	}
> > +
> > +	/* If there's no global regulator, get per-port regulators. */
> > +	dev_dbg(dev,
> > +		"No global PoC regulator, looking for per-port regulators\n");
> > +	priv->regulator = NULL;
> > +
> > +	for_each_source(priv, source) {
> > +		char name[10];
> > +
> > +		snprintf(name, sizeof(name), "port%u-poc", source->index);
> > +		source->regulator = devm_regulator_get_exclusive(dev, name);
> 
> I guess the fact we don't have a fixed number of sources makes it even
> harder to use the _bulk version of the regulators API...

Yes, and that fact that we may at some point want to power cameras
up/down individually.

> > +		if (IS_ERR(source->regulator)) {
> > +			if (PTR_ERR(source->regulator) != -EPROBE_DEFER)
> > +				dev_err(dev,
> > +					"Unable to get port %u PoC regulator: %ld\n",
> > +					source->index,
> > +					PTR_ERR(source->regulator));
> > +			return PTR_ERR(source->regulator);
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static int max9286_probe(struct i2c_client *client)
> >  {
> >  	struct max9286_priv *priv;
> > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client)
> >  	if (ret)
> >  		goto err_powerdown;
> >
> > -	priv->regulator = devm_regulator_get(&client->dev, "poc");
> > -	if (IS_ERR(priv->regulator)) {
> > -		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> > -			dev_err(&client->dev,
> > -				"Unable to get PoC regulator (%ld)\n",
> > -				PTR_ERR(priv->regulator));
> > -		ret = PTR_ERR(priv->regulator);
> > -		goto err_powerdown;
> > -	}
> > -
> >  	ret = max9286_parse_dt(priv);
> > +	if (ret)
> > +		goto err_cleanup_dt;
> > +
> > +	ret = max9286_get_poc_supplies(priv);
> >  	if (ret)
> >  		goto err_powerdown;
> 
> I think the error path is wrong, you should cleanup_dt here.

Oops.

> > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client)
> >
> >  	max9286_v4l2_unregister(priv);
> >
> > -	regulator_disable(priv->regulator);
> > +	max9286_poc_power_off(priv);
> >
> >  	gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
> >
Thomas Nizan Dec. 20, 2021, 3:06 p.m. UTC | #4
Hi Laurent,
On 2021-12-16 11:09 p.m., Laurent Pinchart wrote:
> From: Thomas Nizan <tnizan@witekio.com>
> 
> Allow users to use one PoC regulator per port, instead of a global
> regulator.
> 
> The properties '^port[0-3]-poc-supply$' in the DT node are used to
> indicate the regulators for individual ports.
> 
Signed-off-by: Thomas Nizan <tnizan@witekio.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++-----
>  1 file changed, 98 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index 7c663fd587bb..fa2f6a823fe6 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -136,8 +136,10 @@
>  #define MAX9286_SRC_PAD			4
>  
>  struct max9286_source {
> +	unsigned int index;
>  	struct v4l2_subdev *sd;
>  	struct fwnode_handle *fwnode;
> +	struct regulator *regulator;
>  };
>  
>  struct max9286_asd {
> @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv)
>  	return ret;
>  }
>  
> +static int max9286_poc_power_on(struct max9286_priv *priv)
> +{
> +	struct max9286_source *source;
> +	unsigned int enabled = 0;
> +	int ret;
> +
> +	/* Enable the global regulator if available. */
> +	if (priv->regulator)
> +		return regulator_enable(priv->regulator);
> +
> +	/* Otherwise use the per-port regulators. */
> +	for_each_source(priv, source) {
> +		ret = regulator_enable(source->regulator);
> +		if (ret < 0)
> +			goto error;
> +
> +		enabled |= BIT(source->index);
> +	}
> +
> +	return 0;
> +
> +error:
> +	for_each_source(priv, source) {
> +		if (enabled & BIT(source->index))
> +			regulator_disable(source->regulator);
> +	}
> +
> +	return ret;
> +}
> +
> +static void max9286_poc_power_off(struct max9286_priv *priv)
> +{
> +	struct max9286_source *source;
> +
> +	if (priv->regulator) {
> +		regulator_disable(priv->regulator);
> +		return;
> +	}
> +
> +	for_each_source(priv, source)
> +		regulator_disable(source->regulator);
> +}
> +
>  static int max9286_init(struct device *dev)
>  {
>  	struct max9286_priv *priv;
> @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev)
>  	priv = i2c_get_clientdata(client);
>  
>  	/* Enable the bus power. */
> -	ret = regulator_enable(priv->regulator);
> +	ret = max9286_poc_power_on(priv);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "Unable to turn PoC on\n");
> +		dev_err(dev, "Unable to turn PoC on\n");
>  		return ret;
>  	}
>  
> @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev)
>  err_v4l2_register:
>  	max9286_v4l2_unregister(priv);
>  err_regulator:
> -	regulator_disable(priv->regulator);
> +	max9286_poc_power_off(priv);
>  
>  	return ret;
>  }
> @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv)
>  		}
>  
>  		source = &priv->sources[ep.port];
> +		source->index = ep.port;
>  		source->fwnode = fwnode_graph_get_remote_endpoint(
>  						of_fwnode_handle(node));
>  		if (!source->fwnode) {
> @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv)
>  	return 0;
>  }
>  
> +static int max9286_get_poc_supplies(struct max9286_priv *priv)
> +{
> +	struct device *dev = &priv->client->dev;
> +	struct max9286_source *source;
> +
> +	/*
> +	 * Start by getting the global regulator. Usage of the exclusive API is
> +	 * required to receive an error in case the supply isn't specified in
> +	 * the device tree.
> +	 */
> +	priv->regulator = devm_regulator_get_exclusive(dev, "poc");
> +	if (!IS_ERR(priv->regulator))
> +		return 0;
> +
> +	if (PTR_ERR(priv->regulator) != -ENODEV) {
> +		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> +			dev_err(dev, "Unable to get PoC regulator: %ld\n",
> +				PTR_ERR(priv->regulator));
> +		return PTR_ERR(priv->regulator);
> +	}
> +
> +	/* If there's no global regulator, get per-port regulators. */
> +	dev_dbg(dev,
> +		"No global PoC regulator, looking for per-port regulators\n");
> +	priv->regulator = NULL;
> +
> +	for_each_source(priv, source) {
> +		char name[10];
> +
> +		snprintf(name, sizeof(name), "port%u-poc", source->index);
> +		source->regulator = devm_regulator_get_exclusive(dev, name);
> +		if (IS_ERR(source->regulator)) {
> +			if (PTR_ERR(source->regulator) != -EPROBE_DEFER)
> +				dev_err(dev,
> +					"Unable to get port %u PoC regulator: %ld\n",
> +					source->index,
> +					PTR_ERR(source->regulator));
> +			return PTR_ERR(source->regulator);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int max9286_probe(struct i2c_client *client)
>  {
>  	struct max9286_priv *priv;
> @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client)
>  	if (ret)
>  		goto err_powerdown;
>  
> -	priv->regulator = devm_regulator_get(&client->dev, "poc");
> -	if (IS_ERR(priv->regulator)) {
> -		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> -			dev_err(&client->dev,
> -				"Unable to get PoC regulator (%ld)\n",
> -				PTR_ERR(priv->regulator));
> -		ret = PTR_ERR(priv->regulator);
> -		goto err_powerdown;
> -	}
> -
>  	ret = max9286_parse_dt(priv);
> +	if (ret)
> +		goto err_cleanup_dt;
> +
> +	ret = max9286_get_poc_supplies(priv);
>  	if (ret)
>  		goto err_powerdown;
>  
> @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client)
>  
>  	max9286_v4l2_unregister(priv);
>  
> -	regulator_disable(priv->regulator);
> +	max9286_poc_power_off(priv);
>  
>  	gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
>  
> 
Regards,
Thomas
Laurent Pinchart Dec. 20, 2021, 3:25 p.m. UTC | #5
Hi Thomas,

On Mon, Dec 20, 2021 at 04:06:26PM +0100, Thomas Nizan wrote:
> On 2021-12-16 11:09 p.m., Laurent Pinchart wrote:
> > From: Thomas Nizan <tnizan@witekio.com>
> > 
> > Allow users to use one PoC regulator per port, instead of a global
> > regulator.
> > 
> > The properties '^port[0-3]-poc-supply$' in the DT node are used to
> > indicate the regulators for individual ports.
>
> Signed-off-by: Thomas Nizan <tnizan@witekio.com>

Thank you.

> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> >  drivers/media/i2c/max9286.c | 112 +++++++++++++++++++++++++++++++-----
> >  1 file changed, 98 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> > index 7c663fd587bb..fa2f6a823fe6 100644
> > --- a/drivers/media/i2c/max9286.c
> > +++ b/drivers/media/i2c/max9286.c
> > @@ -136,8 +136,10 @@
> >  #define MAX9286_SRC_PAD			4
> >  
> >  struct max9286_source {
> > +	unsigned int index;
> >  	struct v4l2_subdev *sd;
> >  	struct fwnode_handle *fwnode;
> > +	struct regulator *regulator;
> >  };
> >  
> >  struct max9286_asd {
> > @@ -1072,6 +1074,49 @@ static int max9286_register_gpio(struct max9286_priv *priv)
> >  	return ret;
> >  }
> >  
> > +static int max9286_poc_power_on(struct max9286_priv *priv)
> > +{
> > +	struct max9286_source *source;
> > +	unsigned int enabled = 0;
> > +	int ret;
> > +
> > +	/* Enable the global regulator if available. */
> > +	if (priv->regulator)
> > +		return regulator_enable(priv->regulator);
> > +
> > +	/* Otherwise use the per-port regulators. */
> > +	for_each_source(priv, source) {
> > +		ret = regulator_enable(source->regulator);
> > +		if (ret < 0)
> > +			goto error;
> > +
> > +		enabled |= BIT(source->index);
> > +	}
> > +
> > +	return 0;
> > +
> > +error:
> > +	for_each_source(priv, source) {
> > +		if (enabled & BIT(source->index))
> > +			regulator_disable(source->regulator);
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static void max9286_poc_power_off(struct max9286_priv *priv)
> > +{
> > +	struct max9286_source *source;
> > +
> > +	if (priv->regulator) {
> > +		regulator_disable(priv->regulator);
> > +		return;
> > +	}
> > +
> > +	for_each_source(priv, source)
> > +		regulator_disable(source->regulator);
> > +}
> > +
> >  static int max9286_init(struct device *dev)
> >  {
> >  	struct max9286_priv *priv;
> > @@ -1082,9 +1127,9 @@ static int max9286_init(struct device *dev)
> >  	priv = i2c_get_clientdata(client);
> >  
> >  	/* Enable the bus power. */
> > -	ret = regulator_enable(priv->regulator);
> > +	ret = max9286_poc_power_on(priv);
> >  	if (ret < 0) {
> > -		dev_err(&client->dev, "Unable to turn PoC on\n");
> > +		dev_err(dev, "Unable to turn PoC on\n");
> >  		return ret;
> >  	}
> >  
> > @@ -1118,7 +1163,7 @@ static int max9286_init(struct device *dev)
> >  err_v4l2_register:
> >  	max9286_v4l2_unregister(priv);
> >  err_regulator:
> > -	regulator_disable(priv->regulator);
> > +	max9286_poc_power_off(priv);
> >  
> >  	return ret;
> >  }
> > @@ -1215,6 +1260,7 @@ static int max9286_parse_dt(struct max9286_priv *priv)
> >  		}
> >  
> >  		source = &priv->sources[ep.port];
> > +		source->index = ep.port;
> >  		source->fwnode = fwnode_graph_get_remote_endpoint(
> >  						of_fwnode_handle(node));
> >  		if (!source->fwnode) {
> > @@ -1249,6 +1295,50 @@ static int max9286_parse_dt(struct max9286_priv *priv)
> >  	return 0;
> >  }
> >  
> > +static int max9286_get_poc_supplies(struct max9286_priv *priv)
> > +{
> > +	struct device *dev = &priv->client->dev;
> > +	struct max9286_source *source;
> > +
> > +	/*
> > +	 * Start by getting the global regulator. Usage of the exclusive API is
> > +	 * required to receive an error in case the supply isn't specified in
> > +	 * the device tree.
> > +	 */
> > +	priv->regulator = devm_regulator_get_exclusive(dev, "poc");
> > +	if (!IS_ERR(priv->regulator))
> > +		return 0;
> > +
> > +	if (PTR_ERR(priv->regulator) != -ENODEV) {
> > +		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> > +			dev_err(dev, "Unable to get PoC regulator: %ld\n",
> > +				PTR_ERR(priv->regulator));
> > +		return PTR_ERR(priv->regulator);
> > +	}
> > +
> > +	/* If there's no global regulator, get per-port regulators. */
> > +	dev_dbg(dev,
> > +		"No global PoC regulator, looking for per-port regulators\n");
> > +	priv->regulator = NULL;
> > +
> > +	for_each_source(priv, source) {
> > +		char name[10];
> > +
> > +		snprintf(name, sizeof(name), "port%u-poc", source->index);
> > +		source->regulator = devm_regulator_get_exclusive(dev, name);
> > +		if (IS_ERR(source->regulator)) {
> > +			if (PTR_ERR(source->regulator) != -EPROBE_DEFER)
> > +				dev_err(dev,
> > +					"Unable to get port %u PoC regulator: %ld\n",
> > +					source->index,
> > +					PTR_ERR(source->regulator));
> > +			return PTR_ERR(source->regulator);
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static int max9286_probe(struct i2c_client *client)
> >  {
> >  	struct max9286_priv *priv;
> > @@ -1293,17 +1383,11 @@ static int max9286_probe(struct i2c_client *client)
> >  	if (ret)
> >  		goto err_powerdown;
> >  
> > -	priv->regulator = devm_regulator_get(&client->dev, "poc");
> > -	if (IS_ERR(priv->regulator)) {
> > -		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
> > -			dev_err(&client->dev,
> > -				"Unable to get PoC regulator (%ld)\n",
> > -				PTR_ERR(priv->regulator));
> > -		ret = PTR_ERR(priv->regulator);
> > -		goto err_powerdown;
> > -	}
> > -
> >  	ret = max9286_parse_dt(priv);
> > +	if (ret)
> > +		goto err_cleanup_dt;
> > +
> > +	ret = max9286_get_poc_supplies(priv);
> >  	if (ret)
> >  		goto err_powerdown;
> >  
> > @@ -1329,7 +1413,7 @@ static int max9286_remove(struct i2c_client *client)
> >  
> >  	max9286_v4l2_unregister(priv);
> >  
> > -	regulator_disable(priv->regulator);
> > +	max9286_poc_power_off(priv);
> >  
> >  	gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
> >
diff mbox series

Patch

diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 7c663fd587bb..fa2f6a823fe6 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -136,8 +136,10 @@ 
 #define MAX9286_SRC_PAD			4
 
 struct max9286_source {
+	unsigned int index;
 	struct v4l2_subdev *sd;
 	struct fwnode_handle *fwnode;
+	struct regulator *regulator;
 };
 
 struct max9286_asd {
@@ -1072,6 +1074,49 @@  static int max9286_register_gpio(struct max9286_priv *priv)
 	return ret;
 }
 
+static int max9286_poc_power_on(struct max9286_priv *priv)
+{
+	struct max9286_source *source;
+	unsigned int enabled = 0;
+	int ret;
+
+	/* Enable the global regulator if available. */
+	if (priv->regulator)
+		return regulator_enable(priv->regulator);
+
+	/* Otherwise use the per-port regulators. */
+	for_each_source(priv, source) {
+		ret = regulator_enable(source->regulator);
+		if (ret < 0)
+			goto error;
+
+		enabled |= BIT(source->index);
+	}
+
+	return 0;
+
+error:
+	for_each_source(priv, source) {
+		if (enabled & BIT(source->index))
+			regulator_disable(source->regulator);
+	}
+
+	return ret;
+}
+
+static void max9286_poc_power_off(struct max9286_priv *priv)
+{
+	struct max9286_source *source;
+
+	if (priv->regulator) {
+		regulator_disable(priv->regulator);
+		return;
+	}
+
+	for_each_source(priv, source)
+		regulator_disable(source->regulator);
+}
+
 static int max9286_init(struct device *dev)
 {
 	struct max9286_priv *priv;
@@ -1082,9 +1127,9 @@  static int max9286_init(struct device *dev)
 	priv = i2c_get_clientdata(client);
 
 	/* Enable the bus power. */
-	ret = regulator_enable(priv->regulator);
+	ret = max9286_poc_power_on(priv);
 	if (ret < 0) {
-		dev_err(&client->dev, "Unable to turn PoC on\n");
+		dev_err(dev, "Unable to turn PoC on\n");
 		return ret;
 	}
 
@@ -1118,7 +1163,7 @@  static int max9286_init(struct device *dev)
 err_v4l2_register:
 	max9286_v4l2_unregister(priv);
 err_regulator:
-	regulator_disable(priv->regulator);
+	max9286_poc_power_off(priv);
 
 	return ret;
 }
@@ -1215,6 +1260,7 @@  static int max9286_parse_dt(struct max9286_priv *priv)
 		}
 
 		source = &priv->sources[ep.port];
+		source->index = ep.port;
 		source->fwnode = fwnode_graph_get_remote_endpoint(
 						of_fwnode_handle(node));
 		if (!source->fwnode) {
@@ -1249,6 +1295,50 @@  static int max9286_parse_dt(struct max9286_priv *priv)
 	return 0;
 }
 
+static int max9286_get_poc_supplies(struct max9286_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct max9286_source *source;
+
+	/*
+	 * Start by getting the global regulator. Usage of the exclusive API is
+	 * required to receive an error in case the supply isn't specified in
+	 * the device tree.
+	 */
+	priv->regulator = devm_regulator_get_exclusive(dev, "poc");
+	if (!IS_ERR(priv->regulator))
+		return 0;
+
+	if (PTR_ERR(priv->regulator) != -ENODEV) {
+		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
+			dev_err(dev, "Unable to get PoC regulator: %ld\n",
+				PTR_ERR(priv->regulator));
+		return PTR_ERR(priv->regulator);
+	}
+
+	/* If there's no global regulator, get per-port regulators. */
+	dev_dbg(dev,
+		"No global PoC regulator, looking for per-port regulators\n");
+	priv->regulator = NULL;
+
+	for_each_source(priv, source) {
+		char name[10];
+
+		snprintf(name, sizeof(name), "port%u-poc", source->index);
+		source->regulator = devm_regulator_get_exclusive(dev, name);
+		if (IS_ERR(source->regulator)) {
+			if (PTR_ERR(source->regulator) != -EPROBE_DEFER)
+				dev_err(dev,
+					"Unable to get port %u PoC regulator: %ld\n",
+					source->index,
+					PTR_ERR(source->regulator));
+			return PTR_ERR(source->regulator);
+		}
+	}
+
+	return 0;
+}
+
 static int max9286_probe(struct i2c_client *client)
 {
 	struct max9286_priv *priv;
@@ -1293,17 +1383,11 @@  static int max9286_probe(struct i2c_client *client)
 	if (ret)
 		goto err_powerdown;
 
-	priv->regulator = devm_regulator_get(&client->dev, "poc");
-	if (IS_ERR(priv->regulator)) {
-		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)
-			dev_err(&client->dev,
-				"Unable to get PoC regulator (%ld)\n",
-				PTR_ERR(priv->regulator));
-		ret = PTR_ERR(priv->regulator);
-		goto err_powerdown;
-	}
-
 	ret = max9286_parse_dt(priv);
+	if (ret)
+		goto err_cleanup_dt;
+
+	ret = max9286_get_poc_supplies(priv);
 	if (ret)
 		goto err_powerdown;
 
@@ -1329,7 +1413,7 @@  static int max9286_remove(struct i2c_client *client)
 
 	max9286_v4l2_unregister(priv);
 
-	regulator_disable(priv->regulator);
+	max9286_poc_power_off(priv);
 
 	gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);