| Message ID | 1640020512-17224-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v9] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables | expand |
On Mon 20 Dec 09:15 PST 2021, Kuogee Hsieh wrote: That looks much better. > Commit aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp You're still missing the ' before the sha1 in the referral of the commit (as in '<sha1> ("message")'), but I guess Vinod could sneak that in when he applies the patch? Thanks, Bjorn > phy")' added functions to support V4 of the PHY, but it did not update > voltage and pre-emphasis tables accordingly. > > This patch add v4 voltage and pre-emphasis swing tables to complete v4 > phy implementation. Both voltage and pre-emphasis swing level are set > during link training negotiation between host and sink. There are totally > four tables added. A voltage swing table for both hbr and hbr1, a voltage > table for both hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 > and a pre-emphasis table for both hbr2 and hbr3. > > In addition, write 0x0a to TX_TX_POL_INV is added to complete the sequence > of configure dp phy base on the hardware documentation. > > Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > Reviewed-by: Stephen Boyd <swboyd@chromium.org> > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp.c | 112 +++++++++++++++++++++++++----------- > 1 file changed, 77 insertions(+), 35 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c > index 456a59d..d41e30c 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c > @@ -4255,40 +4255,50 @@ static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy) > qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK); > } > > -static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = { > +#define MAX_SWING_LEVEL 4 > +#define MAX_VOLTAGE_LEVEL 4 > +#define MAX_EMPHASIS_LEVEL 4 > + > +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { > { 0x00, 0x0c, 0x15, 0x1a }, > { 0x02, 0x0e, 0x16, 0xff }, > { 0x02, 0x11, 0xff, 0xff }, > { 0x04, 0xff, 0xff, 0xff } > }; > > -static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = { > +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { > { 0x02, 0x12, 0x16, 0x1a }, > { 0x09, 0x19, 0x1f, 0xff }, > { 0x10, 0x1f, 0xff, 0xff }, > { 0x1f, 0xff, 0xff, 0xff } > }; > > -static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = { > +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { > { 0x00, 0x0c, 0x14, 0x19 }, > { 0x00, 0x0b, 0x12, 0xff }, > { 0x00, 0x0b, 0xff, 0xff }, > { 0x04, 0xff, 0xff, 0xff } > }; > > -static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { > +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { > { 0x08, 0x0f, 0x16, 0x1f }, > { 0x11, 0x1e, 0x1f, 0xff }, > { 0x19, 0x1f, 0xff, 0xff }, > { 0x1f, 0xff, 0xff, 0xff } > }; > > -static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, > - unsigned int drv_lvl_reg, unsigned int emp_post_reg) > +static int __qcom_qmp_phy_configure_dp_swing > + (struct qmp_phy *qphy, > + unsigned int drv_lvl_reg, > + unsigned int emp_post_reg, > + const u8 voltage_swing_hbr_rbr[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL], > + const u8 pre_emphasis_hbr_rbr[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL], > + const u8 voltage_swing_hbr3_hbr2[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL], > + const u8 pre_emphasis_hbr3_hbr2[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL]) > { > const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; > unsigned int v_level = 0, p_level = 0; > - u8 voltage_swing_cfg, pre_emphasis_cfg; > + u8 voltage, emphasis; > int i; > > for (i = 0; i < dp_opts->lanes; i++) { > @@ -4297,26 +4307,25 @@ static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, > } > > if (dp_opts->link_rate <= 2700) { > - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; > - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; > + voltage = voltage_swing_hbr_rbr[v_level][p_level]; > + emphasis = pre_emphasis_hbr_rbr[v_level][p_level]; > } else { > - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level]; > - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level]; > + voltage = voltage_swing_hbr3_hbr2[v_level][p_level]; > + emphasis = pre_emphasis_hbr3_hbr2[v_level][p_level]; > } > > /* TODO: Move check to config check */ > - if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) > + if (voltage == 0xFF && emphasis == 0xFF) > return -EINVAL; > > /* Enable MUX to use Cursor values from these registers */ > - voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; > - pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; > - > - writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg); > - writel(pre_emphasis_cfg, qphy->tx + emp_post_reg); > - writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg); > - writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg); > + voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; > + emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; > > + writel(voltage, qphy->tx + drv_lvl_reg); > + writel(emphasis, qphy->tx + emp_post_reg); > + writel(voltage, qphy->tx2 + drv_lvl_reg); > + writel(emphasis, qphy->tx2 + emp_post_reg); > return 0; > } > > @@ -4325,9 +4334,14 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) > const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; > u32 bias_en, drvr_en; > > - if (qcom_qmp_phy_configure_dp_swing(qphy, > - QSERDES_V3_TX_TX_DRV_LVL, > - QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0) > + if (__qcom_qmp_phy_configure_dp_swing > + (qphy, > + QSERDES_V3_TX_TX_DRV_LVL, > + QSERDES_V3_TX_TX_EMP_POST1_LVL, > + qmp_dp_v3_voltage_swing_hbr_rbr, > + qmp_dp_v3_pre_emphasis_hbr_rbr, > + qmp_dp_v3_voltage_swing_hbr3_hbr2, > + qmp_dp_v3_pre_emphasis_hbr3_hbr2) < 0) > return; > > if (dp_opts->lanes == 1) { > @@ -4465,6 +4479,35 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) > return 0; > } > > +/* The values in these tables are given without MUX_EN (0x20) bit set */ > +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { > + { 0x00, 0x0c, 0x15, 0x1b }, > + { 0x02, 0x0e, 0x16, 0xff }, > + { 0x02, 0x11, 0xff, 0xff }, > + { 0x04, 0xff, 0xff, 0xff } > +}; > + > +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { > + { 0x02, 0x12, 0x16, 0x1a }, > + { 0x09, 0x19, 0x1f, 0xff }, > + { 0x10, 0x1f, 0xff, 0xff }, > + { 0x1f, 0xff, 0xff, 0xff } > +}; > + > +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { > + { 0x00, 0x0e, 0x15, 0x1b }, > + { 0x00, 0x0e, 0x15, 0xff }, > + { 0x00, 0x0e, 0xff, 0xff }, > + { 0x04, 0xff, 0xff, 0xff } > +}; > + > +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { > + { 0x08, 0x0f, 0x16, 0x1f }, > + { 0x11, 0x1e, 0x1f, 0xff }, > + { 0x16, 0x1f, 0xff, 0xff }, > + { 0x1f, 0xff, 0xff, 0xff } > +}; > + > static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) > { > writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | > @@ -4494,16 +4537,14 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) > > static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy) > { > - /* Program default values before writing proper values */ > - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); > - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); > - > - writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); > - writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); > - > - qcom_qmp_phy_configure_dp_swing(qphy, > + __qcom_qmp_phy_configure_dp_swing > + (qphy, > QSERDES_V4_TX_TX_DRV_LVL, > - QSERDES_V4_TX_TX_EMP_POST1_LVL); > + QSERDES_V4_TX_TX_EMP_POST1_LVL, > + qmp_dp_v4_voltage_swing_hbr_rbr, > + qmp_dp_v4_pre_emphasis_hbr_rbr, > + qmp_dp_v4_voltage_swing_hbr3_hbr2, > + qmp_dp_v4_pre_emphasis_hbr3_hbr2); > } > > static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) > @@ -4622,6 +4663,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) > writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); > writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); > > + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); > + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); > + > writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG); > udelay(2000); > writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); > @@ -4633,11 +4677,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) > 10000)) > return -ETIMEDOUT; > > - writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); > - writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); > > - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); > - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); > + writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); > + writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); > > writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); > writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 456a59d..d41e30c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -4255,40 +4255,50 @@ static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy) qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK); } -static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = { +#define MAX_SWING_LEVEL 4 +#define MAX_VOLTAGE_LEVEL 4 +#define MAX_EMPHASIS_LEVEL 4 + +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { { 0x00, 0x0c, 0x15, 0x1a }, { 0x02, 0x0e, 0x16, 0xff }, { 0x02, 0x11, 0xff, 0xff }, { 0x04, 0xff, 0xff, 0xff } }; -static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = { +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { { 0x02, 0x12, 0x16, 0x1a }, { 0x09, 0x19, 0x1f, 0xff }, { 0x10, 0x1f, 0xff, 0xff }, { 0x1f, 0xff, 0xff, 0xff } }; -static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = { +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { { 0x00, 0x0c, 0x14, 0x19 }, { 0x00, 0x0b, 0x12, 0xff }, { 0x00, 0x0b, 0xff, 0xff }, { 0x04, 0xff, 0xff, 0xff } }; -static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { { 0x08, 0x0f, 0x16, 0x1f }, { 0x11, 0x1e, 0x1f, 0xff }, { 0x19, 0x1f, 0xff, 0xff }, { 0x1f, 0xff, 0xff, 0xff } }; -static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, - unsigned int drv_lvl_reg, unsigned int emp_post_reg) +static int __qcom_qmp_phy_configure_dp_swing + (struct qmp_phy *qphy, + unsigned int drv_lvl_reg, + unsigned int emp_post_reg, + const u8 voltage_swing_hbr_rbr[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL], + const u8 pre_emphasis_hbr_rbr[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL], + const u8 voltage_swing_hbr3_hbr2[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL], + const u8 pre_emphasis_hbr3_hbr2[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL]) { const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; unsigned int v_level = 0, p_level = 0; - u8 voltage_swing_cfg, pre_emphasis_cfg; + u8 voltage, emphasis; int i; for (i = 0; i < dp_opts->lanes; i++) { @@ -4297,26 +4307,25 @@ static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, } if (dp_opts->link_rate <= 2700) { - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; + voltage = voltage_swing_hbr_rbr[v_level][p_level]; + emphasis = pre_emphasis_hbr_rbr[v_level][p_level]; } else { - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level]; - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level]; + voltage = voltage_swing_hbr3_hbr2[v_level][p_level]; + emphasis = pre_emphasis_hbr3_hbr2[v_level][p_level]; } /* TODO: Move check to config check */ - if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) + if (voltage == 0xFF && emphasis == 0xFF) return -EINVAL; /* Enable MUX to use Cursor values from these registers */ - voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; - pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; - - writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg); - writel(pre_emphasis_cfg, qphy->tx + emp_post_reg); - writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg); - writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg); + voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + writel(voltage, qphy->tx + drv_lvl_reg); + writel(emphasis, qphy->tx + emp_post_reg); + writel(voltage, qphy->tx2 + drv_lvl_reg); + writel(emphasis, qphy->tx2 + emp_post_reg); return 0; } @@ -4325,9 +4334,14 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; u32 bias_en, drvr_en; - if (qcom_qmp_phy_configure_dp_swing(qphy, - QSERDES_V3_TX_TX_DRV_LVL, - QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0) + if (__qcom_qmp_phy_configure_dp_swing + (qphy, + QSERDES_V3_TX_TX_DRV_LVL, + QSERDES_V3_TX_TX_EMP_POST1_LVL, + qmp_dp_v3_voltage_swing_hbr_rbr, + qmp_dp_v3_pre_emphasis_hbr_rbr, + qmp_dp_v3_voltage_swing_hbr3_hbr2, + qmp_dp_v3_pre_emphasis_hbr3_hbr2) < 0) return; if (dp_opts->lanes == 1) { @@ -4465,6 +4479,35 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) return 0; } +/* The values in these tables are given without MUX_EN (0x20) bit set */ +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { + { 0x00, 0x0c, 0x15, 0x1b }, + { 0x02, 0x0e, 0x16, 0xff }, + { 0x02, 0x11, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { + { 0x02, 0x12, 0x16, 0x1a }, + { 0x09, 0x19, 0x1f, 0xff }, + { 0x10, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[MAX_SWING_LEVEL][MAX_EMPHASIS_LEVEL] = { + { 0x00, 0x0e, 0x15, 0x1b }, + { 0x00, 0x0e, 0x15, 0xff }, + { 0x00, 0x0e, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[MAX_SWING_LEVEL][MAX_VOLTAGE_LEVEL] = { + { 0x08, 0x0f, 0x16, 0x1f }, + { 0x11, 0x1e, 0x1f, 0xff }, + { 0x16, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) { writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | @@ -4494,16 +4537,14 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy) { - /* Program default values before writing proper values */ - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); - - writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); - writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); - - qcom_qmp_phy_configure_dp_swing(qphy, + __qcom_qmp_phy_configure_dp_swing + (qphy, QSERDES_V4_TX_TX_DRV_LVL, - QSERDES_V4_TX_TX_EMP_POST1_LVL); + QSERDES_V4_TX_TX_EMP_POST1_LVL, + qmp_dp_v4_voltage_swing_hbr_rbr, + qmp_dp_v4_pre_emphasis_hbr_rbr, + qmp_dp_v4_voltage_swing_hbr3_hbr2, + qmp_dp_v4_pre_emphasis_hbr3_hbr2); } static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) @@ -4622,6 +4663,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG); udelay(2000); writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); @@ -4633,11 +4677,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) 10000)) return -ETIMEDOUT; - writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); - writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
Commit aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")' added functions to support V4 of the PHY, but it did not update voltage and pre-emphasis tables accordingly. This patch add v4 voltage and pre-emphasis swing tables to complete v4 phy implementation. Both voltage and pre-emphasis swing level are set during link training negotiation between host and sink. There are totally four tables added. A voltage swing table for both hbr and hbr1, a voltage table for both hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 and a pre-emphasis table for both hbr2 and hbr3. In addition, write 0x0a to TX_TX_POL_INV is added to complete the sequence of configure dp phy base on the hardware documentation. Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 112 +++++++++++++++++++++++++----------- 1 file changed, 77 insertions(+), 35 deletions(-)