| Message ID | 20211218213556.42061-1-david@ixit.cz (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | RFC: dt-bindings: soc: qcom: convert GLINK binding to yaml | expand |
On Sat, 18 Dec 2021 22:35:56 +0100, David Heidelberg wrote: > Convert Qualcomm GLINK binding to the yaml syntax. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../bindings/soc/qcom/qcom,glink.txt | 94 ---------------- > .../bindings/soc/qcom/qcom,glink.yaml | 106 ++++++++++++++++++ > 2 files changed, 106 insertions(+), 94 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: compatible: ['qcom,glink-rpm'] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: interrupts: [[0, 168, 1]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: qcom,rpm-msg-ram: [[4294967295]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: mboxes: [[1, 0]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: mbox-names: ['rpm_hlos'] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: $nodename: ['rpm-glink'] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: 'qcom,smem' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: 'qcom,local-pid' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.example.dt.yaml: rpm-glink: 'qcom,remote-pid' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: compatible: ['qcom,glink-rpm'] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: interrupts: [[0, 168, 1]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: qcom,rpm-msg-ram: [[4294967295]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: mboxes: [[4294967295, 0]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: $nodename: ['rpm-glink'] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: 'qcom,smem' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: 'qcom,local-pid' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-glink: 'qcom,remote-pid' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,glink.example.dt.yaml: rpm-requests: 'qcom,glink-channels', 'qcom,intents' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1570646 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Sat, Dec 18, 2021 at 5:36 PM David Heidelberg <david@ixit.cz> wrote: > > Convert Qualcomm GLINK binding to the yaml syntax. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../bindings/soc/qcom/qcom,glink.txt | 94 ---------------- > .../bindings/soc/qcom/qcom,glink.yaml | 106 ++++++++++++++++++ > 2 files changed, 106 insertions(+), 94 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt > deleted file mode 100644 > index 1214192847ac..000000000000 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt > +++ /dev/null > @@ -1,94 +0,0 @@ > -Qualcomm GLINK edge binding > - > -This binding describes a Qualcomm GLINK edge, a fifo based mechanism for > -communication between subsystem-pairs on various Qualcomm platforms. Two types > -of edges can be described by the binding; the GLINK RPM edge and a SMEM based > -edge. > - > -- compatible: > - Usage: required for glink-rpm > - Value type: <stringlist> > - Definition: must be "qcom,glink-rpm" > - > -- label: > - Usage: optional > - Value type: <string> > - Definition: should specify the subsystem name this edge corresponds to. > - > -- interrupts: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: should specify the IRQ used by the remote processor to > - signal this processor about communication related events > - > -- qcom,remote-pid: > - Usage: required for glink-smem > - Value type: <u32> > - Definition: specifies the identifier of the remote endpoint of this edge > - > -- qcom,rpm-msg-ram: > - Usage: required for glink-rpm > - Value type: <prop-encoded-array> > - Definition: handle to RPM message memory resource > - > -- mboxes: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: reference to the "rpm_hlos" mailbox in APCS, as described > - in mailbox/mailbox.txt > - > -= GLINK DEVICES > -Each subnode of the GLINK node represent function tied to a virtual > -communication channel. The name of the nodes are not important. The properties > -of these nodes are defined by the individual bindings for the specific function > -- but must contain the following property: > - > -- qcom,glink-channels: > - Usage: required > - Value type: <stringlist> > - Definition: a list of channels tied to this function, used for matching > - the function to a set of virtual channels > - > -- qcom,intents: > - Usage: optional > - Value type: <prop-encoded-array> > - Definition: a list of size,amount pairs describing what intents should > - be preallocated for this virtual channel. This can be used > - to tweak the default intents available for the channel to > - meet expectations of the remote. > - > -= EXAMPLE > -The following example represents the GLINK RPM node on a MSM8996 device, with > -the function for the "rpm_request" channel defined, which is used for > -regulators and root clocks. > - > - apcs_glb: mailbox@9820000 { > - compatible = "qcom,msm8996-apcs-hmss-global"; > - reg = <0x9820000 0x1000>; > - > - #mbox-cells = <1>; > - }; > - > - rpm_msg_ram: memory@68000 { > - compatible = "qcom,rpm-msg-ram"; > - reg = <0x68000 0x6000>; > - }; > - > - rpm-glink { > - compatible = "qcom,glink-rpm"; > - > - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; > - > - qcom,rpm-msg-ram = <&rpm_msg_ram>; > - > - mboxes = <&apcs_glb 0>; > - > - rpm-requests { > - compatible = "qcom,rpm-msm8996"; > - qcom,glink-channels = "rpm_requests"; > - > - qcom,intents = <0x400 5 > - 0x800 1>; > - ... > - }; > - }; > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml > new file mode 100644 > index 000000000000..11a7c845ea0a > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/soc/qcom/qcom,glink.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm GLINK edge > + > +description: | > + Qualcomm GLINK edge, a fifo based mechanism for communication between > + subsystem-pairs on various Qualcomm platforms. Two types of edges can be > + described by the binding; the GLINK RPM edge and a SMEM based. > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@linaro.org> > + > +properties: > + $nodename: > + pattern: "^(rpm-)?glink(-edge)?$" > + > + compatible: > + const: qcom,glink-rpm > + > + label: > + $ref: /schemas/types.yaml#/definitions/string > + description: should specify the subsystem name this edge corresponds to > + > + interrupts: > + description: > > + should specify the IRQ used by the remote processor to > + signal this processor about communication related events > + maxItems: 1 > + > + mboxes: > + description: > > + reference to the "rpm_hlos" mailbox in APCS, as described > + in mailbox/mailbox.txt > + > + qcom,remote-pid: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: specifies the identifier of the remote endpoint of this edge > + > + qcom,rpm-msg-ram: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: RPM message memory resource > + > +patternProperties: > + ".*": This doesn't work because it will match everything including the above properties. You can use additionalProperties or unevaluatedProperties instead. > + type: object > + properties: > + qcom,glink-channels: > + $ref: /schemas/types.yaml#/definitions/string > + description: > > + a list of channels tied to this function, used for matching > + the function to a set of virtual channels > + > + 'qcom,intents': Don't need quotes. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: > > + a list of size, amount pairs describing what intents should > + be preallocated for this virtual channel. This can be used > + to tweak the default intents available for the channel to > + meet expectations of the remote > + > + required: > + - qcom,glink-channels > + > + additionalProperties: true However, if the child nodes are the above properties plus other device specific properties as this indicates, then you need to split this to a separate schema file for those device specific schemas to reference. Otherwise, unevaluatedProperties can't see all the properties for the child node. Rob
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt deleted file mode 100644 index 1214192847ac..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ /dev/null @@ -1,94 +0,0 @@ -Qualcomm GLINK edge binding - -This binding describes a Qualcomm GLINK edge, a fifo based mechanism for -communication between subsystem-pairs on various Qualcomm platforms. Two types -of edges can be described by the binding; the GLINK RPM edge and a SMEM based -edge. - -- compatible: - Usage: required for glink-rpm - Value type: <stringlist> - Definition: must be "qcom,glink-rpm" - -- label: - Usage: optional - Value type: <string> - Definition: should specify the subsystem name this edge corresponds to. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the IRQ used by the remote processor to - signal this processor about communication related events - -- qcom,remote-pid: - Usage: required for glink-smem - Value type: <u32> - Definition: specifies the identifier of the remote endpoint of this edge - -- qcom,rpm-msg-ram: - Usage: required for glink-rpm - Value type: <prop-encoded-array> - Definition: handle to RPM message memory resource - -- mboxes: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the "rpm_hlos" mailbox in APCS, as described - in mailbox/mailbox.txt - -= GLINK DEVICES -Each subnode of the GLINK node represent function tied to a virtual -communication channel. The name of the nodes are not important. The properties -of these nodes are defined by the individual bindings for the specific function -- but must contain the following property: - -- qcom,glink-channels: - Usage: required - Value type: <stringlist> - Definition: a list of channels tied to this function, used for matching - the function to a set of virtual channels - -- qcom,intents: - Usage: optional - Value type: <prop-encoded-array> - Definition: a list of size,amount pairs describing what intents should - be preallocated for this virtual channel. This can be used - to tweak the default intents available for the channel to - meet expectations of the remote. - -= EXAMPLE -The following example represents the GLINK RPM node on a MSM8996 device, with -the function for the "rpm_request" channel defined, which is used for -regulators and root clocks. - - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x9820000 0x1000>; - - #mbox-cells = <1>; - }; - - rpm_msg_ram: memory@68000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x68000 0x6000>; - }; - - rpm-glink { - compatible = "qcom,glink-rpm"; - - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - mboxes = <&apcs_glb 0>; - - rpm-requests { - compatible = "qcom,rpm-msm8996"; - qcom,glink-channels = "rpm_requests"; - - qcom,intents = <0x400 5 - 0x800 1>; - ... - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml new file mode 100644 index 000000000000..11a7c845ea0a --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,glink.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm GLINK edge + +description: | + Qualcomm GLINK edge, a fifo based mechanism for communication between + subsystem-pairs on various Qualcomm platforms. Two types of edges can be + described by the binding; the GLINK RPM edge and a SMEM based. + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +properties: + $nodename: + pattern: "^(rpm-)?glink(-edge)?$" + + compatible: + const: qcom,glink-rpm + + label: + $ref: /schemas/types.yaml#/definitions/string + description: should specify the subsystem name this edge corresponds to + + interrupts: + description: > + should specify the IRQ used by the remote processor to + signal this processor about communication related events + maxItems: 1 + + mboxes: + description: > + reference to the "rpm_hlos" mailbox in APCS, as described + in mailbox/mailbox.txt + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: specifies the identifier of the remote endpoint of this edge + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle + description: RPM message memory resource + +patternProperties: + ".*": + type: object + properties: + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string + description: > + a list of channels tied to this function, used for matching + the function to a set of virtual channels + + 'qcom,intents': + $ref: /schemas/types.yaml#/definitions/uint32-array + description: > + a list of size, amount pairs describing what intents should + be preallocated for this virtual channel. This can be used + to tweak the default intents available for the channel to + meet expectations of the remote + + required: + - qcom,glink-channels + + additionalProperties: true + +required: + - interrupts + - mboxes + - qcom,smem + - qcom,local-pid + - qcom,remote-pid + +anyOf: + - required: + - qcom,remote-pid + - required: + - qcom,rpm-msg-ram + +additionalProperties: false + +examples: + # The following example represents the GLINK RPM node on a MSM8996 device, + # with the function for the "rpm_request" channel defined, which + # is used for regulators and root clocks. + - | + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <0 168 1>; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + mboxes = <&apcs_glb 0>; + + rpm-requests { + compatible = "qcom,rpm-msm8996"; + qcom,glink-channels = "rpm_requests"; + + qcom,intents = <0x400 5 + 0x800 1>; + }; + };
Convert Qualcomm GLINK binding to the yaml syntax. Signed-off-by: David Heidelberg <david@ixit.cz> --- .../bindings/soc/qcom/qcom,glink.txt | 94 ---------------- .../bindings/soc/qcom/qcom,glink.yaml | 106 ++++++++++++++++++ 2 files changed, 106 insertions(+), 94 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml