| Message ID | af067a193527e8d2bdbcc8b76e256eef87f6db06.1630311481.git.baruch@tkos.co.il (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: IPQ6018 PCIe support | expand |
Hi Andy, Bjorn, On Mon, Aug 30 2021, Baruch Siach wrote: > From: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > > IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that > platform. > > The code is based on downstream[1] Codeaurora kernel v5.4 (branch > win.linuxopenwrt.2.0). > > Split out the DBI registers access part from .init into .post_init. DBI > registers are only accessible after phy_power_on(). > > [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ Can I get your ack on this? DT bits are already in Linus' tree, as well as the PHY. So this is the only missing part for IPQ60xx PCIe support. Thanks, baruch > > Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > v3: > * Drop speed setup; rely on generic code (Rob Herring) > > * Drop unused CLK_RATE macros (Bjorn Helgaas) > > * Minor formatting fixes (Bjorn Helgaas) > > * Add reference to downstream Codeaurora kernel tree (Bjorn Helgaas) > > v2: > * Drop ATU configuration; rely on common code instead > > * Use more common register macros > > * Use bulk clk and reset APIs > --- > drivers/pci/controller/dwc/pcie-designware.h | 1 + > drivers/pci/controller/dwc/pcie-qcom.c | 141 +++++++++++++++++++ > 2 files changed, 142 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h > index ea87809ee298..279c3778a13b 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.h > +++ b/drivers/pci/controller/dwc/pcie-designware.h > @@ -76,6 +76,7 @@ > > #define GEN3_RELATED_OFF 0x890 > #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) > +#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) > #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) > #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 > #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 8a7a300163e5..cb53fd574621 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -52,6 +52,10 @@ > #define PCIE20_PARF_DBI_BASE_ADDR 0x168 > #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C > #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 > +#define AHB_CLK_EN BIT(0) > +#define MSTR_AXI_CLK_EN BIT(1) > +#define BYPASS BIT(4) > + > #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 > #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 > #define PCIE20_PARF_LTSSM 0x1B0 > @@ -168,6 +172,11 @@ struct qcom_pcie_resources_2_7_0 { > struct clk *pipe_clk; > }; > > +struct qcom_pcie_resources_2_9_0 { > + struct clk_bulk_data clks[5]; > + struct reset_control *rst; > +}; > + > union qcom_pcie_resources { > struct qcom_pcie_resources_1_0_0 v1_0_0; > struct qcom_pcie_resources_2_1_0 v2_1_0; > @@ -175,6 +184,7 @@ union qcom_pcie_resources { > struct qcom_pcie_resources_2_3_3 v2_3_3; > struct qcom_pcie_resources_2_4_0 v2_4_0; > struct qcom_pcie_resources_2_7_0 v2_7_0; > + struct qcom_pcie_resources_2_9_0 v2_9_0; > }; > > struct qcom_pcie; > @@ -1266,6 +1276,127 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) > clk_disable_unprepare(res->pipe_clk); > } > > +static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > + struct dw_pcie *pci = pcie->pci; > + struct device *dev = pci->dev; > + int ret; > + > + res->clks[0].id = "iface"; > + res->clks[1].id = "axi_m"; > + res->clks[2].id = "axi_s"; > + res->clks[3].id = "axi_bridge"; > + res->clks[4].id = "rchng"; > + > + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > + if (ret < 0) > + return ret; > + > + res->rst = devm_reset_control_array_get_exclusive(dev); > + if (IS_ERR(res->rst)) > + return PTR_ERR(res->rst); > + > + return 0; > +} > + > +static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > + > + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > +} > + > +static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > + struct device *dev = pcie->pci->dev; > + int ret; > + > + ret = reset_control_assert(res->rst); > + if (ret) { > + dev_err(dev, "reset assert failed (%d)\n", ret); > + return ret; > + } > + > + usleep_range(2000, 2500); > + > + ret = reset_control_deassert(res->rst); > + if (ret) { > + dev_err(dev, "reset deassert failed (%d)\n", ret); > + return ret; > + } > + > + /* > + * Don't have a way to see if the reset has completed. > + * Wait for some time. > + */ > + usleep_range(2000, 2500); > + > + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > + if (ret) > + goto err_reset; > + > + return 0; > + > + /* > + * Not checking for failure, will anyway return > + * the original failure in 'ret'. > + */ > +err_reset: > + reset_control_assert(res->rst); > + > + return ret; > +} > + > +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > +{ > + struct dw_pcie *pci = pcie->pci; > + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > + u32 val; > + int i; > + > + writel(SLV_ADDR_SPACE_SZ, > + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); > + > + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); > + val &= ~BIT(0); > + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); > + > + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); > + > + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); > + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, > + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); > + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS > + | GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, > + pci->dbi_base + GEN3_RELATED_OFF); > + > + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS > + | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | > + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, > + pcie->parf + PCIE20_PARF_SYS_CTRL); > + > + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); > + > + dw_pcie_dbi_ro_wr_en(pci); > + writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); > + > + /* Configure PCIe link capabilities for ASPM */ > + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); > + val &= ~PCI_EXP_LNKCAP_ASPMS; > + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); > + > + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + > + PCI_EXP_DEVCTL2); > + > + for (i = 0; i < 256; i++) > + writel(0x0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N > + + (4 * i)); > + > + return 0; > +} > + > static int qcom_pcie_link_up(struct dw_pcie *pci) > { > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > @@ -1456,6 +1587,15 @@ static const struct qcom_pcie_ops ops_1_9_0 = { > .config_sid = qcom_pcie_config_sid_sm8250, > }; > > +/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ > +static const struct qcom_pcie_ops ops_2_9_0 = { > + .get_resources = qcom_pcie_get_resources_2_9_0, > + .init = qcom_pcie_init_2_9_0, > + .post_init = qcom_pcie_post_init_2_9_0, > + .deinit = qcom_pcie_deinit_2_9_0, > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > +}; > + > static const struct dw_pcie_ops dw_pcie_ops = { > .link_up = qcom_pcie_link_up, > .start_link = qcom_pcie_start_link, > @@ -1555,6 +1695,7 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, > { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, > { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, > + { .compatible = "qcom,pcie-ipq6018", .data = &ops_2_9_0 }, > { } > };
On Thu, Oct 14, 2021 at 09:02:32AM +0300, Baruch Siach wrote: > Hi Andy, Bjorn, > > On Mon, Aug 30 2021, Baruch Siach wrote: > > From: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > > > > IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that > > platform. > > > > The code is based on downstream[1] Codeaurora kernel v5.4 (branch > > win.linuxopenwrt.2.0). > > > > Split out the DBI registers access part from .init into .post_init. DBI > > registers are only accessible after phy_power_on(). > > > > [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ > > Can I get your ack on this? DT bits are already in Linus' tree, as > well as the PHY. So this is the only missing part for IPQ60xx PCIe > support. I need their ACK to proceed. Thanks, Lorenzo > Thanks, > baruch > > > > > Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > > --- > > v3: > > * Drop speed setup; rely on generic code (Rob Herring) > > > > * Drop unused CLK_RATE macros (Bjorn Helgaas) > > > > * Minor formatting fixes (Bjorn Helgaas) > > > > * Add reference to downstream Codeaurora kernel tree (Bjorn Helgaas) > > > > v2: > > * Drop ATU configuration; rely on common code instead > > > > * Use more common register macros > > > > * Use bulk clk and reset APIs > > --- > > drivers/pci/controller/dwc/pcie-designware.h | 1 + > > drivers/pci/controller/dwc/pcie-qcom.c | 141 +++++++++++++++++++ > > 2 files changed, 142 insertions(+) > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h > > index ea87809ee298..279c3778a13b 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware.h > > +++ b/drivers/pci/controller/dwc/pcie-designware.h > > @@ -76,6 +76,7 @@ > > > > #define GEN3_RELATED_OFF 0x890 > > #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) > > +#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) > > #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) > > #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 > > #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > > index 8a7a300163e5..cb53fd574621 100644 > > --- a/drivers/pci/controller/dwc/pcie-qcom.c > > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > > @@ -52,6 +52,10 @@ > > #define PCIE20_PARF_DBI_BASE_ADDR 0x168 > > #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C > > #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 > > +#define AHB_CLK_EN BIT(0) > > +#define MSTR_AXI_CLK_EN BIT(1) > > +#define BYPASS BIT(4) > > + > > #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 > > #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 > > #define PCIE20_PARF_LTSSM 0x1B0 > > @@ -168,6 +172,11 @@ struct qcom_pcie_resources_2_7_0 { > > struct clk *pipe_clk; > > }; > > > > +struct qcom_pcie_resources_2_9_0 { > > + struct clk_bulk_data clks[5]; > > + struct reset_control *rst; > > +}; > > + > > union qcom_pcie_resources { > > struct qcom_pcie_resources_1_0_0 v1_0_0; > > struct qcom_pcie_resources_2_1_0 v2_1_0; > > @@ -175,6 +184,7 @@ union qcom_pcie_resources { > > struct qcom_pcie_resources_2_3_3 v2_3_3; > > struct qcom_pcie_resources_2_4_0 v2_4_0; > > struct qcom_pcie_resources_2_7_0 v2_7_0; > > + struct qcom_pcie_resources_2_9_0 v2_9_0; > > }; > > > > struct qcom_pcie; > > @@ -1266,6 +1276,127 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) > > clk_disable_unprepare(res->pipe_clk); > > } > > > > +static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) > > +{ > > + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > + struct dw_pcie *pci = pcie->pci; > > + struct device *dev = pci->dev; > > + int ret; > > + > > + res->clks[0].id = "iface"; > > + res->clks[1].id = "axi_m"; > > + res->clks[2].id = "axi_s"; > > + res->clks[3].id = "axi_bridge"; > > + res->clks[4].id = "rchng"; > > + > > + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > > + if (ret < 0) > > + return ret; > > + > > + res->rst = devm_reset_control_array_get_exclusive(dev); > > + if (IS_ERR(res->rst)) > > + return PTR_ERR(res->rst); > > + > > + return 0; > > +} > > + > > +static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) > > +{ > > + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > + > > + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > > +} > > + > > +static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) > > +{ > > + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; > > + struct device *dev = pcie->pci->dev; > > + int ret; > > + > > + ret = reset_control_assert(res->rst); > > + if (ret) { > > + dev_err(dev, "reset assert failed (%d)\n", ret); > > + return ret; > > + } > > + > > + usleep_range(2000, 2500); > > + > > + ret = reset_control_deassert(res->rst); > > + if (ret) { > > + dev_err(dev, "reset deassert failed (%d)\n", ret); > > + return ret; > > + } > > + > > + /* > > + * Don't have a way to see if the reset has completed. > > + * Wait for some time. > > + */ > > + usleep_range(2000, 2500); > > + > > + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > > + if (ret) > > + goto err_reset; > > + > > + return 0; > > + > > + /* > > + * Not checking for failure, will anyway return > > + * the original failure in 'ret'. > > + */ > > +err_reset: > > + reset_control_assert(res->rst); > > + > > + return ret; > > +} > > + > > +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) > > +{ > > + struct dw_pcie *pci = pcie->pci; > > + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > > + u32 val; > > + int i; > > + > > + writel(SLV_ADDR_SPACE_SZ, > > + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); > > + > > + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); > > + val &= ~BIT(0); > > + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); > > + > > + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); > > + > > + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); > > + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, > > + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); > > + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS > > + | GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, > > + pci->dbi_base + GEN3_RELATED_OFF); > > + > > + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS > > + | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | > > + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, > > + pcie->parf + PCIE20_PARF_SYS_CTRL); > > + > > + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); > > + > > + dw_pcie_dbi_ro_wr_en(pci); > > + writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); > > + > > + /* Configure PCIe link capabilities for ASPM */ > > + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); > > + val &= ~PCI_EXP_LNKCAP_ASPMS; > > + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); > > + > > + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + > > + PCI_EXP_DEVCTL2); > > + > > + for (i = 0; i < 256; i++) > > + writel(0x0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N > > + + (4 * i)); > > + > > + return 0; > > +} > > + > > static int qcom_pcie_link_up(struct dw_pcie *pci) > > { > > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > > @@ -1456,6 +1587,15 @@ static const struct qcom_pcie_ops ops_1_9_0 = { > > .config_sid = qcom_pcie_config_sid_sm8250, > > }; > > > > +/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ > > +static const struct qcom_pcie_ops ops_2_9_0 = { > > + .get_resources = qcom_pcie_get_resources_2_9_0, > > + .init = qcom_pcie_init_2_9_0, > > + .post_init = qcom_pcie_post_init_2_9_0, > > + .deinit = qcom_pcie_deinit_2_9_0, > > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > > +}; > > + > > static const struct dw_pcie_ops dw_pcie_ops = { > > .link_up = qcom_pcie_link_up, > > .start_link = qcom_pcie_start_link, > > @@ -1555,6 +1695,7 @@ static const struct of_device_id qcom_pcie_match[] = { > > { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, > > { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, > > { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, > > + { .compatible = "qcom,pcie-ipq6018", .data = &ops_2_9_0 }, > > { } > > }; > > > -- > ~. .~ Tk Open Systems > =}------------------------------------------------ooO--U--Ooo------------{= > - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index ea87809ee298..279c3778a13b 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -76,6 +76,7 @@ #define GEN3_RELATED_OFF 0x890 #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) +#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 8a7a300163e5..cb53fd574621 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -52,6 +52,10 @@ #define PCIE20_PARF_DBI_BASE_ADDR 0x168 #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +#define AHB_CLK_EN BIT(0) +#define MSTR_AXI_CLK_EN BIT(1) +#define BYPASS BIT(4) + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 #define PCIE20_PARF_LTSSM 0x1B0 @@ -168,6 +172,11 @@ struct qcom_pcie_resources_2_7_0 { struct clk *pipe_clk; }; +struct qcom_pcie_resources_2_9_0 { + struct clk_bulk_data clks[5]; + struct reset_control *rst; +}; + union qcom_pcie_resources { struct qcom_pcie_resources_1_0_0 v1_0_0; struct qcom_pcie_resources_2_1_0 v2_1_0; @@ -175,6 +184,7 @@ union qcom_pcie_resources { struct qcom_pcie_resources_2_3_3 v2_3_3; struct qcom_pcie_resources_2_4_0 v2_4_0; struct qcom_pcie_resources_2_7_0 v2_7_0; + struct qcom_pcie_resources_2_9_0 v2_9_0; }; struct qcom_pcie; @@ -1266,6 +1276,127 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) clk_disable_unprepare(res->pipe_clk); } +static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->clks[0].id = "iface"; + res->clks[1].id = "axi_m"; + res->clks[2].id = "axi_s"; + res->clks[3].id = "axi_bridge"; + res->clks[4].id = "rchng"; + + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); + if (ret < 0) + return ret; + + res->rst = devm_reset_control_array_get_exclusive(dev); + if (IS_ERR(res->rst)) + return PTR_ERR(res->rst); + + return 0; +} + +static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; + + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); +} + +static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; + struct device *dev = pcie->pci->dev; + int ret; + + ret = reset_control_assert(res->rst); + if (ret) { + dev_err(dev, "reset assert failed (%d)\n", ret); + return ret; + } + + usleep_range(2000, 2500); + + ret = reset_control_deassert(res->rst); + if (ret) { + dev_err(dev, "reset deassert failed (%d)\n", ret); + return ret; + } + + /* + * Don't have a way to see if the reset has completed. + * Wait for some time. + */ + usleep_range(2000, 2500); + + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + if (ret) + goto err_reset; + + return 0; + + /* + * Not checking for failure, will anyway return + * the original failure in 'ret'. + */ +err_reset: + reset_control_assert(res->rst); + + return ret; +} + +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) +{ + struct dw_pcie *pci = pcie->pci; + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u32 val; + int i; + + writel(SLV_ADDR_SPACE_SZ, + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); + + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS + | GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, + pci->dbi_base + GEN3_RELATED_OFF); + + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS + | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, + pcie->parf + PCIE20_PARF_SYS_CTRL); + + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); + + dw_pcie_dbi_ro_wr_en(pci); + writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); + + /* Configure PCIe link capabilities for ASPM */ + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPMS; + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); + + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + + PCI_EXP_DEVCTL2); + + for (i = 0; i < 256; i++) + writel(0x0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + + (4 * i)); + + return 0; +} + static int qcom_pcie_link_up(struct dw_pcie *pci) { u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); @@ -1456,6 +1587,15 @@ static const struct qcom_pcie_ops ops_1_9_0 = { .config_sid = qcom_pcie_config_sid_sm8250, }; +/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ +static const struct qcom_pcie_ops ops_2_9_0 = { + .get_resources = qcom_pcie_get_resources_2_9_0, + .init = qcom_pcie_init_2_9_0, + .post_init = qcom_pcie_post_init_2_9_0, + .deinit = qcom_pcie_deinit_2_9_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, .start_link = qcom_pcie_start_link, @@ -1555,6 +1695,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, + { .compatible = "qcom,pcie-ipq6018", .data = &ops_2_9_0 }, { } };