| Message ID | 20211201041228.32444-8-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Broadcom DT bindings conversion to YAML | expand |
On Tue, 30 Nov 2021 20:12:28 -0800, Florian Fainelli wrote: > Conver the Broadcom iProc MDIO mux Device Tree binding to YAML. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > .../bindings/net/brcm,mdio-mux-iproc.txt | 62 -------------- > .../bindings/net/brcm,mdio-mux-iproc.yaml | 80 +++++++++++++++++++ > 2 files changed, 80 insertions(+), 62 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt > create mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.example.dt.yaml:0:0: /example-0/mdio-mux@66020000/mdio@0/pci-phy@0: failed to match any schema with compatible: ['brcm,ns2-pcie-phy'] Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.example.dt.yaml:0:0: /example-0/mdio-mux@66020000/mdio@7/pci-phy@0: failed to match any schema with compatible: ['brcm,ns2-pcie-phy'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1562000 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Tue, Nov 30, 2021 at 08:12:28PM -0800, Florian Fainelli wrote: > Conver the Broadcom iProc MDIO mux Device Tree binding to YAML. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > .../bindings/net/brcm,mdio-mux-iproc.txt | 62 -------------- > .../bindings/net/brcm,mdio-mux-iproc.yaml | 80 +++++++++++++++++++ > 2 files changed, 80 insertions(+), 62 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt > create mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml > > diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt > deleted file mode 100644 > index deb9e852ea27..000000000000 > --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt > +++ /dev/null > @@ -1,62 +0,0 @@ > -Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs. > - > -This MDIO bus multiplexer defines buses that could be internal as well as > -external to SoCs and could accept MDIO transaction compatible to C-22 or > -C-45 Clause. When child bus is selected, one needs to select these two > -properties as well to generate desired MDIO transaction on appropriate bus. > - > -Required properties in addition to the generic multiplexer properties: > - > -MDIO multiplexer node: > -- compatible: brcm,mdio-mux-iproc. > - > -Every non-ethernet PHY requires a compatible so that it could be probed based > -on this compatible string. > - > -Optional properties: > -- clocks: phandle of the core clock which drives the mdio block. > - > -Additional information regarding generic multiplexer properties can be found > -at- Documentation/devicetree/bindings/net/mdio-mux.yaml > - > - > -for example: > - mdio_mux_iproc: mdio-mux@66020000 { > - compatible = "brcm,mdio-mux-iproc"; > - reg = <0x66020000 0x250>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - mdio@0 { > - reg = <0x0>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - pci_phy0: pci-phy@0 { > - compatible = "brcm,ns2-pcie-phy"; > - reg = <0x0>; > - #phy-cells = <0>; > - }; > - }; > - > - mdio@7 { > - reg = <0x7>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - pci_phy1: pci-phy@0 { > - compatible = "brcm,ns2-pcie-phy"; > - reg = <0x0>; > - #phy-cells = <0>; > - }; > - }; > - mdio@10 { > - reg = <0x10>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - gphy0: eth-phy@10 { > - reg = <0x10>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml > new file mode 100644 > index 000000000000..a576fb87bfc8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: GPL-2.0 All Broadcom authors on the original. Please add BSD-2-Clause. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MDIO bus multiplexer found in Broadcom iProc based SoCs. > + > +maintainers: > + - Florian Fainelli <f.fainelli@gmail.com> > + > +description: > + This MDIO bus multiplexer defines buses that could be internal as well as > + external to SoCs and could accept MDIO transaction compatible to C-22 or > + C-45 Clause. When child bus is selected, one needs to select these two > + properties as well to generate desired MDIO transaction on appropriate bus. > + > +allOf: > + - $ref: /schemas/net/mdio-mux.yaml# > + > +properties: > + compatible: > + const: brcm,mdio-mux-iproc > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: core clock driving the MDIO block > + > + > +required: > + - compatible > + - reg > + > +unevaluatedProperties: false > + > +examples: > + - | > + mdio_mux_iproc: mdio-mux@66020000 { > + compatible = "brcm,mdio-mux-iproc"; > + reg = <0x66020000 0x250>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + mdio@0 { > + reg = <0x0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pci_phy0: pci-phy@0 { > + compatible = "brcm,ns2-pcie-phy"; > + reg = <0x0>; > + #phy-cells = <0>; > + }; > + }; > + > + mdio@7 { > + reg = <0x7>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pci_phy1: pci-phy@0 { > + compatible = "brcm,ns2-pcie-phy"; > + reg = <0x0>; > + #phy-cells = <0>; > + }; > + }; > + > + mdio@10 { > + reg = <0x10>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gphy0: eth-phy@10 { > + reg = <0x10>; > + }; > + }; > + }; > -- > 2.25.1 > >
On 12/1/21 11:06 AM, Rob Herring wrote: [snip] >> diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml >> new file mode 100644 >> index 000000000000..a576fb87bfc8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml >> @@ -0,0 +1,80 @@ >> +# SPDX-License-Identifier: GPL-2.0 > > All Broadcom authors on the original. Please add BSD-2-Clause. Sure, please review v2 and let me know if there are other changes that should be done, v2 was sent before you had a chance to reply to this one.
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt deleted file mode 100644 index deb9e852ea27..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt +++ /dev/null @@ -1,62 +0,0 @@ -Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs. - -This MDIO bus multiplexer defines buses that could be internal as well as -external to SoCs and could accept MDIO transaction compatible to C-22 or -C-45 Clause. When child bus is selected, one needs to select these two -properties as well to generate desired MDIO transaction on appropriate bus. - -Required properties in addition to the generic multiplexer properties: - -MDIO multiplexer node: -- compatible: brcm,mdio-mux-iproc. - -Every non-ethernet PHY requires a compatible so that it could be probed based -on this compatible string. - -Optional properties: -- clocks: phandle of the core clock which drives the mdio block. - -Additional information regarding generic multiplexer properties can be found -at- Documentation/devicetree/bindings/net/mdio-mux.yaml - - -for example: - mdio_mux_iproc: mdio-mux@66020000 { - compatible = "brcm,mdio-mux-iproc"; - reg = <0x66020000 0x250>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; - }; - - mdio@7 { - reg = <0x7>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy1: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; - }; - mdio@10 { - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml new file mode 100644 index 000000000000..a576fb87bfc8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO bus multiplexer found in Broadcom iProc based SoCs. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + This MDIO bus multiplexer defines buses that could be internal as well as + external to SoCs and could accept MDIO transaction compatible to C-22 or + C-45 Clause. When child bus is selected, one needs to select these two + properties as well to generate desired MDIO transaction on appropriate bus. + +allOf: + - $ref: /schemas/net/mdio-mux.yaml# + +properties: + compatible: + const: brcm,mdio-mux-iproc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: core clock driving the MDIO block + + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio_mux_iproc: mdio-mux@66020000 { + compatible = "brcm,mdio-mux-iproc"; + reg = <0x66020000 0x250>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy0: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; + + mdio@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy1: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; + }; + + mdio@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; + };
Conver the Broadcom iProc MDIO mux Device Tree binding to YAML. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- .../bindings/net/brcm,mdio-mux-iproc.txt | 62 -------------- .../bindings/net/brcm,mdio-mux-iproc.yaml | 80 +++++++++++++++++++ 2 files changed, 80 insertions(+), 62 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt create mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml