| Message ID | 20211201072949.53947-1-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Support for some TQMa8M* boards | expand |
On Wed, Dec 01, 2021 at 08:29:41AM +0100, Alexander Stein wrote: > Thanks for the review on v2! > > Changes in v3: > * Rebased to next-20211129 > * Adjusted commit subjects (tree -> device tree) > * Use hyphen in node names instead of underscore > * Removed bootargs from DT > * Fixed audio-codec node name and handle name > * Property 'enet-phy-lane-no-swap' was already documented, but got accidently > removed during YAML conversion. Fix is pending at at [2] > * Use matrix instead of array for 'fsl,pins' as required by pinctrl bindings. > This reduces the lines in stderr from dtbs_check for these DT files from 475 > down to 191 > * Removed TODO regarding unsupported USB over-current polarity > > Changes in v2: > * Rebased to next-20211101 > * Added Rob's Acked-By on Patch for DT bindings > * for other changes please refer to individual patches > > Note on TQMa8Mx: > Due to CPU errata cpuidle is broken and needs to be disabled, see [1] for > pending patch. > > This patch set adds support for the following modules: > * TQMa8Mx > * TQMa8MxML > * TQMa8MxNL > > Each of the modules is available with different i.MX8M variants, the > bootloader modifies the device tree and disabled paripherals which > are not available on the actual hardware. > > All of them can be attached to the same mainboard MBa8Mx, although > TQMa8MxML & TQMa8MxNL need an adapter. For that reason there is a single > mainboard .dtsi file named mba8mx.dtsi. > > There is a .dtsi file for each module named imx8m?-tmqa8m*.dts. > > Finally there is the final .dts file which includes the mainboard and > the attached module and contains the missing connection, prominently clk > and pinctrl defines. > > [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20211105095535.3920998-1-alexander.stein@ew.tq-group.com/ > [2] https://www.spinics.net/lists/devicetree/msg460023.html > > Alexander Stein (7): > dt-bindings: arm: fsl: add TQMa8MxML boards > arm64: dts: freescale: add initial device tree for TQMa8MQML with > i.MX8MM > arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx > dt-bindings: arm: fsl: add TQMa8MxNL boards > arm64: dts: freescale: add initial device tree for TQMa8MQNL with > i.MX8MN > dt-bindings: arm: fsl: add TQMa8Mx boards > arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M Applied all, thanks!
Thanks for the review on v2! Changes in v3: * Rebased to next-20211129 * Adjusted commit subjects (tree -> device tree) * Use hyphen in node names instead of underscore * Removed bootargs from DT * Fixed audio-codec node name and handle name * Property 'enet-phy-lane-no-swap' was already documented, but got accidently removed during YAML conversion. Fix is pending at at [2] * Use matrix instead of array for 'fsl,pins' as required by pinctrl bindings. This reduces the lines in stderr from dtbs_check for these DT files from 475 down to 191 * Removed TODO regarding unsupported USB over-current polarity Changes in v2: * Rebased to next-20211101 * Added Rob's Acked-By on Patch for DT bindings * for other changes please refer to individual patches Note on TQMa8Mx: Due to CPU errata cpuidle is broken and needs to be disabled, see [1] for pending patch. This patch set adds support for the following modules: * TQMa8Mx * TQMa8MxML * TQMa8MxNL Each of the modules is available with different i.MX8M variants, the bootloader modifies the device tree and disabled paripherals which are not available on the actual hardware. All of them can be attached to the same mainboard MBa8Mx, although TQMa8MxML & TQMa8MxNL need an adapter. For that reason there is a single mainboard .dtsi file named mba8mx.dtsi. There is a .dtsi file for each module named imx8m?-tmqa8m*.dts. Finally there is the final .dts file which includes the mainboard and the attached module and contains the missing connection, prominently clk and pinctrl defines. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20211105095535.3920998-1-alexander.stein@ew.tq-group.com/ [2] https://www.spinics.net/lists/devicetree/msg460023.html Alexander Stein (7): dt-bindings: arm: fsl: add TQMa8MxML boards arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx dt-bindings: arm: fsl: add TQMa8MxNL boards arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN dt-bindings: arm: fsl: add TQMa8Mx boards arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M .../devicetree/bindings/arm/fsl.yaml | 31 ++ arch/arm64/boot/dts/freescale/Makefile | 3 + .../dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 253 ++++++++++++ .../boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 335 ++++++++++++++++ .../dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts | 237 ++++++++++++ .../boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 322 ++++++++++++++++ .../dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 349 +++++++++++++++++ .../boot/dts/freescale/imx8mq-tqma8mq.dtsi | 360 ++++++++++++++++++ arch/arm64/boot/dts/freescale/mba8mx.dtsi | 282 ++++++++++++++ arch/arm64/configs/defconfig | 7 + 10 files changed, 2179 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi create mode 100644 arch/arm64/boot/dts/freescale/mba8mx.dtsi