| Message ID | 20211202122021.43124-3-alistair@alistair23.me (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for the Cypress cyttsp5 | expand |
On Thu, 02 Dec 2021 22:20:19 +1000, Alistair Francis wrote: > From: Mylène Josserand <mylene.josserand@free-electrons.com> > > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings > documentation. It can use I2C or SPI bus. > This touchscreen can handle some defined zone that are designed and > sent as button. To be able to customize the keycode sent, the > "linux,code" property in a "button" sub-node can be used. > > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> > Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com> > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > .../input/touchscreen/cypress,tt21000.yaml | 92 +++++++++++++++++++ > 1 file changed, 92 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:37.26-39.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen@24/button@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:41.26-43.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen@24/button@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:45.26-47.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen@24/button@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml:0:0: /example-0/i2c/touchscreen@24: failed to match any schema with compatible: ['cypress,tt2100'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1562669 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Thu, Dec 02, 2021 at 10:20:19PM +1000, Alistair Francis wrote: > From: Mylène Josserand <mylene.josserand@free-electrons.com> For the subject, use subjects matching other commits for the directory and 'documentation' (twice) is redundant as that's all bindings: dt-bindings: input: Add Cypress TT2100 touchscreen controller > > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings > documentation. It can use I2C or SPI bus. > This touchscreen can handle some defined zone that are designed and > sent as button. To be able to customize the keycode sent, the > "linux,code" property in a "button" sub-node can be used. > > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> > Message-Id: <20170529144538.29187-3-mylene.josserand@free-electrons.com> Not a tag used in the kernel. > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > .../input/touchscreen/cypress,tt21000.yaml | 92 +++++++++++++++++++ > 1 file changed, 92 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml > new file mode 100644 > index 000000000000..f3f353192917 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml > @@ -0,0 +1,92 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Cypress TT2100 touchscreen controller > + > +description: The Cypress TT2100 series (also known as "CYTTSP5" after > + the marketing name Cypress TrueTouch Standard Product series 5). > + > +maintainers: > + - Alistair Francis <alistair@alistair23.me> > + > +allOf: > + - $ref: touchscreen.yaml# > + > +properties: > + compatible: > + const: cypress,tt21000 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + vdd-supply: > + description: Regulator for voltage. > + > + reset-gpios: > + maxItems: 1 > + > + linux,code: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: EV_ABS specific event code generated by the axis. > + > +patternProperties: > + "^button-[0-9]+$": > + type: object > + properties: > + linux,code: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Keycode to emit > + > + required: > + - linux,code > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - vdd-supply > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/input/linux-event-codes.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + touchscreen@24 { > + compatible = "cypress,tt2100"; > + reg = <0x24>; > + pinctrl-names = "default"; > + pinctrl-0 = <&tp_reset_ds203>; > + interrupt-parent = <&pio>; > + interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>; > + reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; > + vdd-supply = <®_touch>; > + > + button@0 { > + linux,code = <KEY_HOMEPAGE>; > + }; > + > + button@1 { > + linux,code = <KEY_MENU>; > + }; > + > + button@2 { > + linux,code = <KEY_BACK>; > + }; > + }; > + }; > +... > -- > 2.31.1 > >
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml new file mode 100644 index 000000000000..f3f353192917 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress TT2100 touchscreen controller + +description: The Cypress TT2100 series (also known as "CYTTSP5" after + the marketing name Cypress TrueTouch Standard Product series 5). + +maintainers: + - Alistair Francis <alistair@alistair23.me> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: cypress,tt21000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator for voltage. + + reset-gpios: + maxItems: 1 + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: EV_ABS specific event code generated by the axis. + +patternProperties: + "^button-[0-9]+$": + type: object + properties: + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Keycode to emit + + required: + - linux,code + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/linux-event-codes.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@24 { + compatible = "cypress,tt2100"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_reset_ds203>; + interrupt-parent = <&pio>; + interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + + button@0 { + linux,code = <KEY_HOMEPAGE>; + }; + + button@1 { + linux,code = <KEY_MENU>; + }; + + button@2 { + linux,code = <KEY_BACK>; + }; + }; + }; +...