diff mbox series

[1/2] arm64: dts: ls1088a: Add reboot nodes

Message ID 20211204011537.8963-1-leoyang.li@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: ls1088a: Add reboot nodes | expand

Commit Message

Leo Li Dec. 4, 2021, 1:15 a.m. UTC 
ls1088a has a separate reset register block.  Define it in dts and use
it for reboot.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Shawn Guo Dec. 14, 2021, 8:07 a.m. UTC | #1 
On Fri, Dec 03, 2021 at 07:15:36PM -0600, Li Yang wrote:
> ls1088a has a separate reset register block.  Define it in dts and use
> it for reboot.
> 
> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
> Signed-off-by: Li Yang <leoyang.li@nxp.com>

Applied both, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index f891ef6a3754..1eda080b497c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -206,6 +206,13 @@  sysclk: sysclk {
 		clock-output-names = "sysclk";
 	};
 
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&reset>;
+		offset = <0x0>;
+		mask = <0x02>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -226,6 +233,11 @@  dcfg: dcfg@1e00000 {
 			little-endian;
 		};
 
+		reset: syscon@1e60000 {
+			compatible = "fsl,ls1088a-reset", "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+		};
+
 		isc: syscon@1f70000 {
 			compatible = "fsl,ls1088a-isc", "syscon";
 			reg = <0x0 0x1f70000 0x0 0x10000>;