| Message ID | 20211201072949.53947-4-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support for some TQMa8M* boards | expand |
On 21-12-01 08:29:44, Alexander Stein wrote: > With the device tree in place, enable missing drivers as modules, if > possible. PHY driver needs built-in for interrupt support. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > Changes in v3: > * None > > Changes in v2: > * Add interconnect driver for imx8mm and imx8mn > > arch/arm64/configs/defconfig | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 0da6a944d5cd..44ce56dd2638 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -363,6 +363,7 @@ CONFIG_MICROSEMI_PHY=y > CONFIG_AT803X_PHY=y > CONFIG_REALTEK_PHY=y > CONFIG_ROCKCHIP_PHY=y > +CONFIG_DP83867_PHY=y > CONFIG_VITESSE_PHY=y > CONFIG_USB_PEGASUS=m > CONFIG_USB_RTL8150=m > @@ -397,6 +398,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m > CONFIG_INPUT_MISC=y > CONFIG_INPUT_PM8941_PWRKEY=y > CONFIG_INPUT_PM8XXX_VIBRATOR=m > +CONFIG_INPUT_PWM_BEEPER=m > CONFIG_INPUT_PWM_VIBRA=m > CONFIG_INPUT_HISI_POWERKEY=y > # CONFIG_SERIO_SERPORT is not set > @@ -556,6 +558,7 @@ CONFIG_BATTERY_MAX17042=m > CONFIG_CHARGER_BQ25890=m > CONFIG_CHARGER_BQ25980=m > CONFIG_SENSORS_ARM_SCPI=y > +CONFIG_SENSORS_JC42=m > CONFIG_SENSORS_LM90=m > CONFIG_SENSORS_PWM_FAN=m > CONFIG_SENSORS_RASPBERRYPI_HWMON=m > @@ -793,6 +796,7 @@ CONFIG_SND_SOC_RT5659=m > CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m > CONFIG_SND_SOC_SIMPLE_MUX=m > CONFIG_SND_SOC_TAS571X=m > +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m > CONFIG_SND_SOC_WCD934X=m > CONFIG_SND_SOC_WM8904=m > CONFIG_SND_SOC_WM8960=m > @@ -908,6 +912,7 @@ CONFIG_RTC_DRV_DS1307=m > CONFIG_RTC_DRV_HYM8563=m > CONFIG_RTC_DRV_MAX77686=y > CONFIG_RTC_DRV_RK808=m > +CONFIG_RTC_DRV_PCF85063=m > CONFIG_RTC_DRV_PCF85363=m > CONFIG_RTC_DRV_M41T80=m > CONFIG_RTC_DRV_RX8581=m > @@ -1175,6 +1180,8 @@ CONFIG_SLIM_QCOM_NGD_CTRL=m > CONFIG_MUX_MMIO=y > CONFIG_INTERCONNECT=y > CONFIG_INTERCONNECT_IMX=m > +CONFIG_INTERCONNECT_IMX8MM=m > +CONFIG_INTERCONNECT_IMX8MN=m Nope. The interconnect doesn't work without imx8m-ddrc and imx-bus devfreq drivers. Those drivers do not work yet. So please drop the interconnect configs for now. > CONFIG_INTERCONNECT_IMX8MQ=m > CONFIG_INTERCONNECT_QCOM=y > CONFIG_INTERCONNECT_QCOM_MSM8916=m > -- > 2.25.1 >
Am Donnerstag, dem 16.12.2021 um 22:26 +0200 schrieb Abel Vesa: > On 21-12-01 08:29:44, Alexander Stein wrote: > > With the device tree in place, enable missing drivers as modules, > > if > > possible. PHY driver needs built-in for interrupt support. > > > > Signed-off-by: Alexander Stein < > > alexander.stein@ew.tq-group.com > > > > > --- > > Changes in v3: > > * None > > > > Changes in v2: > > * Add interconnect driver for imx8mm and imx8mn > > > > arch/arm64/configs/defconfig | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/arch/arm64/configs/defconfig > > b/arch/arm64/configs/defconfig > > index 0da6a944d5cd..44ce56dd2638 100644 > > --- a/arch/arm64/configs/defconfig > > +++ b/arch/arm64/configs/defconfig > > @@ -363,6 +363,7 @@ CONFIG_MICROSEMI_PHY=y > > CONFIG_AT803X_PHY=y > > CONFIG_REALTEK_PHY=y > > CONFIG_ROCKCHIP_PHY=y > > +CONFIG_DP83867_PHY=y > > CONFIG_VITESSE_PHY=y > > CONFIG_USB_PEGASUS=m > > CONFIG_USB_RTL8150=m > > @@ -397,6 +398,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m > > CONFIG_INPUT_MISC=y > > CONFIG_INPUT_PM8941_PWRKEY=y > > CONFIG_INPUT_PM8XXX_VIBRATOR=m > > +CONFIG_INPUT_PWM_BEEPER=m > > CONFIG_INPUT_PWM_VIBRA=m > > CONFIG_INPUT_HISI_POWERKEY=y > > # CONFIG_SERIO_SERPORT is not set > > @@ -556,6 +558,7 @@ CONFIG_BATTERY_MAX17042=m > > CONFIG_CHARGER_BQ25890=m > > CONFIG_CHARGER_BQ25980=m > > CONFIG_SENSORS_ARM_SCPI=y > > +CONFIG_SENSORS_JC42=m > > CONFIG_SENSORS_LM90=m > > CONFIG_SENSORS_PWM_FAN=m > > CONFIG_SENSORS_RASPBERRYPI_HWMON=m > > @@ -793,6 +796,7 @@ CONFIG_SND_SOC_RT5659=m > > CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m > > CONFIG_SND_SOC_SIMPLE_MUX=m > > CONFIG_SND_SOC_TAS571X=m > > +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m > > CONFIG_SND_SOC_WCD934X=m > > CONFIG_SND_SOC_WM8904=m > > CONFIG_SND_SOC_WM8960=m > > @@ -908,6 +912,7 @@ CONFIG_RTC_DRV_DS1307=m > > CONFIG_RTC_DRV_HYM8563=m > > CONFIG_RTC_DRV_MAX77686=y > > CONFIG_RTC_DRV_RK808=m > > +CONFIG_RTC_DRV_PCF85063=m > > CONFIG_RTC_DRV_PCF85363=m > > CONFIG_RTC_DRV_M41T80=m > > CONFIG_RTC_DRV_RX8581=m > > @@ -1175,6 +1180,8 @@ CONFIG_SLIM_QCOM_NGD_CTRL=m > > CONFIG_MUX_MMIO=y > > CONFIG_INTERCONNECT=y > > CONFIG_INTERCONNECT_IMX=m > > +CONFIG_INTERCONNECT_IMX8MM=m > > +CONFIG_INTERCONNECT_IMX8MN=m > > Nope. The interconnect doesn't work without imx8m-ddrc > and imx-bus devfreq drivers. Those drivers do not work > yet. > > So please drop the interconnect configs for now. They have been applied to next already, see [1]. Shawn, do you want a revert for those 2 options then? Best regards, Alexander [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/arm64/configs/defconfig?id=2ecc02a6b3f0e2a4339952c4f8b86a4d87876930
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 0da6a944d5cd..44ce56dd2638 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -363,6 +363,7 @@ CONFIG_MICROSEMI_PHY=y CONFIG_AT803X_PHY=y CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y +CONFIG_DP83867_PHY=y CONFIG_VITESSE_PHY=y CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m @@ -397,6 +398,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y CONFIG_INPUT_PM8XXX_VIBRATOR=m +CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_PWM_VIBRA=m CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set @@ -556,6 +558,7 @@ CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_BQ25890=m CONFIG_CHARGER_BQ25980=m CONFIG_SENSORS_ARM_SCPI=y +CONFIG_SENSORS_JC42=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m @@ -793,6 +796,7 @@ CONFIG_SND_SOC_RT5659=m CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m CONFIG_SND_SOC_SIMPLE_MUX=m CONFIG_SND_SOC_TAS571X=m +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m CONFIG_SND_SOC_WCD934X=m CONFIG_SND_SOC_WM8904=m CONFIG_SND_SOC_WM8960=m @@ -908,6 +912,7 @@ CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_HYM8563=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m +CONFIG_RTC_DRV_PCF85063=m CONFIG_RTC_DRV_PCF85363=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_RX8581=m @@ -1175,6 +1180,8 @@ CONFIG_SLIM_QCOM_NGD_CTRL=m CONFIG_MUX_MMIO=y CONFIG_INTERCONNECT=y CONFIG_INTERCONNECT_IMX=m +CONFIG_INTERCONNECT_IMX8MM=m +CONFIG_INTERCONNECT_IMX8MN=m CONFIG_INTERCONNECT_IMX8MQ=m CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8916=m
With the device tree in place, enable missing drivers as modules, if possible. PHY driver needs built-in for interrupt support. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Changes in v3: * None Changes in v2: * Add interconnect driver for imx8mm and imx8mn arch/arm64/configs/defconfig | 7 +++++++ 1 file changed, 7 insertions(+)