diff mbox series

[1/6] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings

Message ID 20220107145515.613009-2-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series drm/meson: add support for MIPI DSI Display | expand

Commit Message

Neil Armstrong Jan. 7, 2022, 2:55 p.m. UTC 
The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI Glue
on the same Amlogic SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../display/amlogic,meson-dw-mipi-dsi.yaml    | 118 ++++++++++++++++++
 1 file changed, 118 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml

Comments

Rob Herring (Arm) Jan. 12, 2022, 1:54 a.m. UTC | #1 
On Fri, Jan 07, 2022 at 03:55:10PM +0100, Neil Armstrong wrote:
> The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
> with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI Glue
> on the same Amlogic SoCs.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../display/amlogic,meson-dw-mipi-dsi.yaml    | 118 ++++++++++++++++++
>  1 file changed, 118 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml
> new file mode 100644
> index 000000000000..f3070783d606
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml
> @@ -0,0 +1,118 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2020 BayLibre, SAS
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-mipi-dsi.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
> +
> +maintainers:
> +  - Neil Armstrong <narmstrong@baylibre.com>
> +
> +description: |
> +  The Amlogic Meson Synopsys Designware Integration is composed of
> +  - A Synopsys DesignWare MIPI DSI Host Controller IP
> +  - A TOP control block controlling the Clocks & Resets of the IP
> +
> +allOf:
> +  - $ref: dsi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,meson-g12a-dw-mipi-dsi
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +
> +  clock-names:
> +    minItems: 2
> +    items:
> +      - const: pclk
> +      - const: px_clk
> +      - const: meas_clk
> +
> +  resets:
> +    minItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: top
> +
> +  phys:
> +    minItems: 1
> +
> +  phy-names:
> +    items:
> +      - const: dphy
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base

/schemas/graph.yaml#/properties/port

> +        unevaluatedProperties: false

And this can be dropped.

> +        description: Input node to receive pixel data.
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false

Same here.

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +        description: DSI output node to panel.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - phys
> +  - phy-names
> +  - ports
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    dsi@7000 {
> +          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
> +          reg = <0x6000 0x400>;
> +          resets = <&reset_top>;
> +          reset-names = "top";
> +          clocks = <&clk_pclk>, <&clk_px>;
> +          clock-names = "pclk", "px_clk";
> +          phys = <&mipi_dphy>;
> +          phy-names = "dphy";
> +
> +          ports {
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +
> +              /* VPU VENC Input */
> +              mipi_dsi_venc_port: port@0 {
> +                  reg = <0>;
> +
> +                  mipi_dsi_in: endpoint {
> +                       remote-endpoint = <&dpi_out>;
> +                  };
> +              };
> +
> +              /* DSI Output */
> +              mipi_dsi_panel_port: port@1 {
> +                  reg = <1>;
> +
> +                  mipi_out_panel: endpoint {
> +                      remote-endpoint = <&mipi_in_panel>;
> +                  };
> +              };
> +          };
> +    };
> -- 
> 2.25.1
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..f3070783d606
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-mipi-dsi.yaml
@@ -0,0 +1,118 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-mipi-dsi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  The Amlogic Meson Synopsys Designware Integration is composed of
+  - A Synopsys DesignWare MIPI DSI Host Controller IP
+  - A TOP control block controlling the Clocks & Resets of the IP
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-dw-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pclk
+      - const: px_clk
+      - const: meas_clk
+
+  resets:
+    minItems: 1
+
+  reset-names:
+    items:
+      - const: top
+
+  phys:
+    minItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@7000 {
+          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+          reg = <0x6000 0x400>;
+          resets = <&reset_top>;
+          reset-names = "top";
+          clocks = <&clk_pclk>, <&clk_px>;
+          clock-names = "pclk", "px_clk";
+          phys = <&mipi_dphy>;
+          phy-names = "dphy";
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              /* VPU VENC Input */
+              mipi_dsi_venc_port: port@0 {
+                  reg = <0>;
+
+                  mipi_dsi_in: endpoint {
+                       remote-endpoint = <&dpi_out>;
+                  };
+              };
+
+              /* DSI Output */
+              mipi_dsi_panel_port: port@1 {
+                  reg = <1>;
+
+                  mipi_out_panel: endpoint {
+                      remote-endpoint = <&mipi_in_panel>;
+                  };
+              };
+          };
+    };