diff mbox series

[04/23] clk: samsung: fsd: Add cmu_peric block clock information

Message ID 20220113121143.22280-5-alim.akhtar@samsung.com (mailing list archive)
State Superseded
Headers show
Series [01/23] dt-bindings: clock: Document FSD CMU bindings | expand

Commit Message

Alim Akhtar Jan. 13, 2022, 12:11 p.m. UTC 
This patch adds CMU_PERIC block clock information needed
for various IPs functions found in this block.

Cc: linux-fsd@tesla.com
Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
Signed-off-by: Niyas Ahmed S T <niyas.ahmed@samsung.com>
Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 drivers/clk/samsung/clk-fsd.c | 464 +++++++++++++++++++++++++++++++++-
 1 file changed, 463 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Jan. 13, 2022, 12:55 p.m. UTC | #1 
On 13/01/2022 13:11, Alim Akhtar wrote:
> This patch adds CMU_PERIC block clock information needed
> for various IPs functions found in this block.

Here and in all other commits, please do not use "This patch". Instead:
https://elixir.bootlin.com/linux/v5.13/source/Documentation/process/submitting-patches.rst#L89

> 
> Cc: linux-fsd@tesla.com
> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
> Signed-off-by: Niyas Ahmed S T <niyas.ahmed@samsung.com>
> Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  drivers/clk/samsung/clk-fsd.c | 464 +++++++++++++++++++++++++++++++++-
>  1 file changed, 463 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-fsd.c b/drivers/clk/samsung/clk-fsd.c
> index e47523106d9e..6da20966ba99 100644
> --- a/drivers/clk/samsung/clk-fsd.c
> +++ b/drivers/clk/samsung/clk-fsd.c
> @@ -9,12 +9,59 @@
>   *
>   */
>  
> -#include <linux/clk-provider.h>
>  #include <linux/of.h>
> +#include <linux/clk.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>

Please order the includes alphabetically.

>  
>  #include "clk.h"
>  #include <dt-bindings/clock/fsd-clk.h>
>  
> +/* Gate register bits */
> +#define GATE_MANUAL		BIT(20)
> +#define GATE_ENABLE_HWACG	BIT(28)
> +
> +/* Gate register offsets range */
> +#define GATE_OFF_START		0x2000
> +#define GATE_OFF_END		0x2fff
> +
> +/**
> + * fsd_init_clocks - Set clocks initial configuration
> + * @np:			CMU device tree node with "reg" property (CMU addr)
> + * @reg_offs:		Register offsets array for clocks to init
> + * @reg_offs_len:	Number of register offsets in reg_offs array
> + *
> + * Set manual control mode for all gate clocks.
> + */
> +static void __init fsd_init_clocks(struct device_node *np,
> +		const unsigned long *reg_offs, size_t reg_offs_len)

The same as exynos_arm64_init_clocks - please re-use instead of duplicating.

> +{
> +	void __iomem *reg_base;
> +	size_t i;
> +
> +	reg_base = of_iomap(np, 0);
> +	if (!reg_base)
> +		panic("%s: failed to map registers\n", __func__);
> +
> +	for (i = 0; i < reg_offs_len; ++i) {
> +		void __iomem *reg = reg_base + reg_offs[i];
> +		u32 val;
> +
> +		/* Modify only gate clock registers */
> +		if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
> +			continue;
> +
> +		val = readl(reg);
> +		val |= GATE_MANUAL;
> +		val &= ~GATE_ENABLE_HWACG;
> +		writel(val, reg);
> +	}
> +
> +	iounmap(reg_base);
> +}
> +

(...)

> +/**
> + * fsd_cmu_probe - Probe function for FSD platform clocks
> + * @pdev: Pointer to platform device
> + *
> + * Configure clock hierarchy for clock domains of FSD platform
> + */
> +static int __init fsd_cmu_probe(struct platform_device *pdev)
> +{
> +	const struct samsung_cmu_info *info;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +
> +	info = of_device_get_match_data(dev);
> +	fsd_init_clocks(np, info->clk_regs, info->nr_clk_regs);
> +	samsung_cmu_register_one(np, info);
> +
> +	/* Keep bus clock running, so it's possible to access CMU registers */
> +	if (info->clk_name) {
> +		struct clk *bus_clk;
> +
> +		bus_clk = clk_get(dev, info->clk_name);
> +		if (IS_ERR(bus_clk)) {
> +			pr_err("%s: could not find bus clock %s; err = %ld\n",
> +			       __func__, info->clk_name, PTR_ERR(bus_clk));
> +		} else {
> +			clk_prepare_enable(bus_clk);
> +		}
> +	}
> +
> +	return 0;
> +}

Please re-use exynos_arm64_register_cmu(). This will also solve my
previous comment about exynos_arm64_init_clocks().

> +
> +/* CMUs which belong to Power Domains and need runtime PM to be implemented */
> +static const struct of_device_id fsd_cmu_of_match[] = {
> +	{
> +		.compatible = "tesla,fsd-clock-peric",
> +		.data = &peric_cmu_info,
> +	}, {
> +	},
> +};
> +
> +static struct platform_driver fsd_cmu_driver __refdata = {
> +	.driver	= {
> +		.name = "fsd-cmu",
> +		.of_match_table = fsd_cmu_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = fsd_cmu_probe,
> +};
> +
> +static int __init fsd_cmu_init(void)
> +{
> +	return platform_driver_register(&fsd_cmu_driver);
> +}
> +core_initcall(fsd_cmu_init);
> 


Best regards,
Krzysztof
Alim Akhtar Jan. 14, 2022, 6:30 a.m. UTC | #2 
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Thursday, January 13, 2022 6:25 PM
>To: Alim Akhtar <alim.akhtar@samsung.com>; linux-arm-
>kernel@lists.infradead.org; linux-kernel@vger.kernel.org
>Cc: soc@kernel.org; linux-clk@vger.kernel.org; devicetree@vger.kernel.org;
>olof@lixom.net; linus.walleij@linaro.org; catalin.marinas@arm.com;
>robh+dt@kernel.org; s.nawrocki@samsung.com; linux-samsung-
>soc@vger.kernel.org; pankaj.dubey@samsung.com; linux-fsd@tesla.com;
>Aswani Reddy <aswani.reddy@samsung.com>; Niyas Ahmed S T
><niyas.ahmed@samsung.com>; Chandrasekar R <rcsekar@samsung.com>;
>Jayati Sahu <jayati.sahu@samsung.com>; Sriranjani P
><sriranjani.p@samsung.com>; Ajay Kumar <ajaykumar.rs@samsung.com>
>Subject: Re: [PATCH 04/23] clk: samsung: fsd: Add cmu_peric block clock
>information
>
>On 13/01/2022 13:11, Alim Akhtar wrote:
>> This patch adds CMU_PERIC block clock information needed for various
>> IPs functions found in this block.
>
>Here and in all other commits, please do not use "This patch". Instead:
>https://protect2.fireeye.com/v1/url?k=5ec41fe1-015f26dc-5ec594ae-
>0cc47a31309a-72c796795ac37ef5&q=1&e=2a1e171b-f066-48ff-95a7-
>12605dbbf8a9&u=https%3A%2F%2Felixir.bootlin.com%2Flinux%2Fv5.13%2Fso
>urce%2FDocumentation%2Fprocess%2Fsubmitting-patches.rst%23L89
>
Noted
>>
>> Cc: linux-fsd@tesla.com
>> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
>> Signed-off-by: Niyas Ahmed S T <niyas.ahmed@samsung.com>
>> Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
>> Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
>> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> ---
>>  drivers/clk/samsung/clk-fsd.c | 464
>> +++++++++++++++++++++++++++++++++-
>>  1 file changed, 463 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/samsung/clk-fsd.c
>> b/drivers/clk/samsung/clk-fsd.c index e47523106d9e..6da20966ba99
>> 100644
>> --- a/drivers/clk/samsung/clk-fsd.c
>> +++ b/drivers/clk/samsung/clk-fsd.c
>> @@ -9,12 +9,59 @@
>>   *
>>   */
>>
>> -#include <linux/clk-provider.h>
>>  #include <linux/of.h>
>> +#include <linux/clk.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/platform_device.h>
>
>Please order the includes alphabetically.
>
Sure will fix this
>>
>>  #include "clk.h"
>>  #include <dt-bindings/clock/fsd-clk.h>
>>
>> +/* Gate register bits */
>> +#define GATE_MANUAL		BIT(20)
>> +#define GATE_ENABLE_HWACG	BIT(28)
>> +
>> +/* Gate register offsets range */
>> +#define GATE_OFF_START		0x2000
>> +#define GATE_OFF_END		0x2fff
>> +
>> +/**
>> + * fsd_init_clocks - Set clocks initial configuration
>> + * @np:			CMU device tree node with "reg" property
>(CMU addr)
>> + * @reg_offs:		Register offsets array for clocks to init
>> + * @reg_offs_len:	Number of register offsets in reg_offs array
>> + *
>> + * Set manual control mode for all gate clocks.
>> + */
>> +static void __init fsd_init_clocks(struct device_node *np,
>> +		const unsigned long *reg_offs, size_t reg_offs_len)
>
>The same as exynos_arm64_init_clocks - please re-use instead of duplicating.
>
Will re-base on latest tree to have these common functions
>> +{
>> +	void __iomem *reg_base;
>> +	size_t i;
>> +
>> +	reg_base = of_iomap(np, 0);
>> +	if (!reg_base)
>> +		panic("%s: failed to map registers\n", __func__);
>> +
>> +	for (i = 0; i < reg_offs_len; ++i) {
>> +		void __iomem *reg = reg_base + reg_offs[i];
>> +		u32 val;
>> +
>> +		/* Modify only gate clock registers */
>> +		if (reg_offs[i] < GATE_OFF_START || reg_offs[i] >
>GATE_OFF_END)
>> +			continue;
>> +
>> +		val = readl(reg);
>> +		val |= GATE_MANUAL;
>> +		val &= ~GATE_ENABLE_HWACG;
>> +		writel(val, reg);
>> +	}
>> +
>> +	iounmap(reg_base);
>> +}
>> +
>
>(...)
>
>> +/**
>> + * fsd_cmu_probe - Probe function for FSD platform clocks
>> + * @pdev: Pointer to platform device
>> + *
>> + * Configure clock hierarchy for clock domains of FSD platform  */
>> +static int __init fsd_cmu_probe(struct platform_device *pdev) {
>> +	const struct samsung_cmu_info *info;
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +
>> +	info = of_device_get_match_data(dev);
>> +	fsd_init_clocks(np, info->clk_regs, info->nr_clk_regs);
>> +	samsung_cmu_register_one(np, info);
>> +
>> +	/* Keep bus clock running, so it's possible to access CMU registers */
>> +	if (info->clk_name) {
>> +		struct clk *bus_clk;
>> +
>> +		bus_clk = clk_get(dev, info->clk_name);
>> +		if (IS_ERR(bus_clk)) {
>> +			pr_err("%s: could not find bus clock %s; err = %ld\n",
>> +			       __func__, info->clk_name, PTR_ERR(bus_clk));
>> +		} else {
>> +			clk_prepare_enable(bus_clk);
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>
>Please re-use exynos_arm64_register_cmu(). This will also solve my previous
>comment about exynos_arm64_init_clocks().
>
ok
>> +
>> +/* CMUs which belong to Power Domains and need runtime PM to be
>> +implemented */ static const struct of_device_id fsd_cmu_of_match[] = {
>> +	{
>> +		.compatible = "tesla,fsd-clock-peric",
>> +		.data = &peric_cmu_info,
>> +	}, {
>> +	},
>> +};
>> +
>> +static struct platform_driver fsd_cmu_driver __refdata = {
>> +	.driver	= {
>> +		.name = "fsd-cmu",
>> +		.of_match_table = fsd_cmu_of_match,
>> +		.suppress_bind_attrs = true,
>> +	},
>> +	.probe = fsd_cmu_probe,
>> +};
>> +
>> +static int __init fsd_cmu_init(void)
>> +{
>> +	return platform_driver_register(&fsd_cmu_driver);
>> +}
>> +core_initcall(fsd_cmu_init);
>>
>
>
>Best regards,
>Krzysztof
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-fsd.c b/drivers/clk/samsung/clk-fsd.c
index e47523106d9e..6da20966ba99 100644
--- a/drivers/clk/samsung/clk-fsd.c
+++ b/drivers/clk/samsung/clk-fsd.c
@@ -9,12 +9,59 @@ 
  *
  */
 
-#include <linux/clk-provider.h>
 #include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
 
 #include "clk.h"
 #include <dt-bindings/clock/fsd-clk.h>
 
+/* Gate register bits */
+#define GATE_MANUAL		BIT(20)
+#define GATE_ENABLE_HWACG	BIT(28)
+
+/* Gate register offsets range */
+#define GATE_OFF_START		0x2000
+#define GATE_OFF_END		0x2fff
+
+/**
+ * fsd_init_clocks - Set clocks initial configuration
+ * @np:			CMU device tree node with "reg" property (CMU addr)
+ * @reg_offs:		Register offsets array for clocks to init
+ * @reg_offs_len:	Number of register offsets in reg_offs array
+ *
+ * Set manual control mode for all gate clocks.
+ */
+static void __init fsd_init_clocks(struct device_node *np,
+		const unsigned long *reg_offs, size_t reg_offs_len)
+{
+	void __iomem *reg_base;
+	size_t i;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	for (i = 0; i < reg_offs_len; ++i) {
+		void __iomem *reg = reg_base + reg_offs[i];
+		u32 val;
+
+		/* Modify only gate clock registers */
+		if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
+			continue;
+
+		val = readl(reg);
+		val |= GATE_MANUAL;
+		val &= ~GATE_ENABLE_HWACG;
+		writel(val, reg);
+	}
+
+	iounmap(reg_base);
+}
+
 /* Register Offset definitions for CMU_CMU (0x11c10000) */
 #define PLL_LOCKTIME_PLL_SHARED0			0x0
 #define PLL_LOCKTIME_PLL_SHARED1			0x4
@@ -306,3 +353,418 @@  static void __init fsd_clk_cmu_init(struct device_node *np)
 }
 
 CLK_OF_DECLARE(fsd_clk_cmu, "tesla,fsd-clock-cmu", fsd_clk_cmu_init);
+
+/* Register Offset definitions for CMU_PERIC (0x14010000) */
+#define PLL_CON0_PERIC_DMACLK_MUX		0x100
+#define PLL_CON0_PERIC_EQOS_BUSCLK_MUX		0x120
+#define PLL_CON0_PERIC_PCLK_MUX			0x140
+#define PLL_CON0_PERIC_TBUCLK_MUX		0x160
+#define PLL_CON0_SPI_CLK			0x180
+#define PLL_CON0_SPI_PCLK			0x1a0
+#define PLL_CON0_UART_CLK			0x1c0
+#define PLL_CON0_UART_PCLK			0x1e0
+#define MUX_PERIC_EQOS_PHYRXCLK			0x1000
+#define DIV_EQOS_BUSCLK				0x1800
+#define DIV_PERIC_MCAN_CLK			0x1804
+#define DIV_RGMII_CLK				0x1808
+#define DIV_RII_CLK				0x180c
+#define DIV_RMII_CLK				0x1810
+#define DIV_SPI_CLK				0x1814
+#define DIV_UART_CLK				0x1818
+#define GAT_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I	0x2000
+#define GAT_GPIO_PERIC_IPCLKPORT_OSCCLK		0x2004
+#define GAT_PERIC_ADC0_IPCLKPORT_I_OSCCLK	0x2008
+#define GAT_PERIC_CMU_PERIC_IPCLKPORT_PCLK	0x200c
+#define GAT_PERIC_PWM0_IPCLKPORT_I_OSCCLK	0x2010
+#define GAT_PERIC_PWM1_IPCLKPORT_I_OSCCLK	0x2014
+#define GAT_ASYNC_APB_DMA0_IPCLKPORT_PCLKM	0x2018
+#define GAT_ASYNC_APB_DMA0_IPCLKPORT_PCLKS	0x201c
+#define GAT_ASYNC_APB_DMA1_IPCLKPORT_PCLKM	0x2020
+#define GAT_ASYNC_APB_DMA1_IPCLKPORT_PCLKS	0x2024
+#define GAT_AXI2APB_PERIC0_IPCLKPORT_ACLK	0x2028
+#define GAT_AXI2APB_PERIC1_IPCLKPORT_ACLK	0x202c
+#define GAT_AXI2APB_PERIC2_IPCLKPORT_ACLK	0x2030
+#define GAT_BUS_D_PERIC_IPCLKPORT_DMACLK	0x2034
+#define GAT_BUS_D_PERIC_IPCLKPORT_EQOSCLK	0x2038
+#define GAT_BUS_D_PERIC_IPCLKPORT_MAINCLK	0x203c
+#define GAT_BUS_P_PERIC_IPCLKPORT_EQOSCLK	0x2040
+#define GAT_BUS_P_PERIC_IPCLKPORT_MAINCLK	0x2044
+#define GAT_BUS_P_PERIC_IPCLKPORT_SMMUCLK	0x2048
+#define GAT_EQOS_TOP_IPCLKPORT_ACLK_I		0x204c
+#define GAT_EQOS_TOP_IPCLKPORT_CLK_RX_I		0x2050
+#define GAT_EQOS_TOP_IPCLKPORT_HCLK_I		0x2054
+#define GAT_EQOS_TOP_IPCLKPORT_RGMII_CLK_I	0x2058
+#define GAT_EQOS_TOP_IPCLKPORT_RII_CLK_I	0x205c
+#define GAT_EQOS_TOP_IPCLKPORT_RMII_CLK_I	0x2060
+#define GAT_GPIO_PERIC_IPCLKPORT_PCLK		0x2064
+#define GAT_NS_BRDG_PERIC_IPCLKPORT_CLK__PSOC_PERIC__CLK_PERIC_D	0x2068
+#define GAT_NS_BRDG_PERIC_IPCLKPORT_CLK__PSOC_PERIC__CLK_PERIC_P	0x206c
+#define GAT_PERIC_ADC0_IPCLKPORT_PCLK_S0	0x2070
+#define GAT_PERIC_DMA0_IPCLKPORT_ACLK		0x2074
+#define GAT_PERIC_DMA1_IPCLKPORT_ACLK		0x2078
+#define GAT_PERIC_I2C0_IPCLKPORT_I_PCLK		0x207c
+#define GAT_PERIC_I2C1_IPCLKPORT_I_PCLK		0x2080
+#define GAT_PERIC_I2C2_IPCLKPORT_I_PCLK		0x2084
+#define GAT_PERIC_I2C3_IPCLKPORT_I_PCLK		0x2088
+#define GAT_PERIC_I2C4_IPCLKPORT_I_PCLK		0x208c
+#define GAT_PERIC_I2C5_IPCLKPORT_I_PCLK		0x2090
+#define GAT_PERIC_I2C6_IPCLKPORT_I_PCLK		0x2094
+#define GAT_PERIC_I2C7_IPCLKPORT_I_PCLK		0x2098
+#define GAT_PERIC_MCAN0_IPCLKPORT_CCLK		0x209c
+#define GAT_PERIC_MCAN0_IPCLKPORT_PCLK		0x20a0
+#define GAT_PERIC_MCAN1_IPCLKPORT_CCLK		0x20a4
+#define GAT_PERIC_MCAN1_IPCLKPORT_PCLK		0x20a8
+#define GAT_PERIC_MCAN2_IPCLKPORT_CCLK		0x20ac
+#define GAT_PERIC_MCAN2_IPCLKPORT_PCLK		0x20b0
+#define GAT_PERIC_MCAN3_IPCLKPORT_CCLK		0x20b4
+#define GAT_PERIC_MCAN3_IPCLKPORT_PCLK		0x20b8
+#define GAT_PERIC_PWM0_IPCLKPORT_I_PCLK_S0	0x20bc
+#define GAT_PERIC_PWM1_IPCLKPORT_I_PCLK_S0	0x20c0
+#define GAT_PERIC_SMMU_IPCLKPORT_CCLK		0x20c4
+#define GAT_PERIC_SMMU_IPCLKPORT_PERIC_BCLK	0x20c8
+#define GAT_PERIC_SPI0_IPCLKPORT_I_PCLK		0x20cc
+#define GAT_PERIC_SPI0_IPCLKPORT_I_SCLK_SPI	0x20d0
+#define GAT_PERIC_SPI1_IPCLKPORT_I_PCLK		0x20d4
+#define GAT_PERIC_SPI1_IPCLKPORT_I_SCLK_SPI	0x20d8
+#define GAT_PERIC_SPI2_IPCLKPORT_I_PCLK		0x20dc
+#define GAT_PERIC_SPI2_IPCLKPORT_I_SCLK_SPI	0x20e0
+#define GAT_PERIC_TDM0_IPCLKPORT_HCLK_M		0x20e4
+#define GAT_PERIC_TDM0_IPCLKPORT_PCLK		0x20e8
+#define GAT_PERIC_TDM1_IPCLKPORT_HCLK_M		0x20ec
+#define GAT_PERIC_TDM1_IPCLKPORT_PCLK		0x20f0
+#define GAT_PERIC_UART0_IPCLKPORT_I_SCLK_UART	0x20f4
+#define GAT_PERIC_UART0_IPCLKPORT_PCLK		0x20f8
+#define GAT_PERIC_UART1_IPCLKPORT_I_SCLK_UART	0x20fc
+#define GAT_PERIC_UART1_IPCLKPORT_PCLK		0x2100
+#define GAT_SYSREG_PERI_IPCLKPORT_PCLK		0x2104
+
+static const unsigned long peric_clk_regs[] __initconst = {
+	PLL_CON0_PERIC_DMACLK_MUX,
+	PLL_CON0_PERIC_EQOS_BUSCLK_MUX,
+	PLL_CON0_PERIC_PCLK_MUX,
+	PLL_CON0_PERIC_TBUCLK_MUX,
+	PLL_CON0_SPI_CLK,
+	PLL_CON0_SPI_PCLK,
+	PLL_CON0_UART_CLK,
+	PLL_CON0_UART_PCLK,
+	MUX_PERIC_EQOS_PHYRXCLK,
+	DIV_EQOS_BUSCLK,
+	DIV_PERIC_MCAN_CLK,
+	DIV_RGMII_CLK,
+	DIV_RII_CLK,
+	DIV_RMII_CLK,
+	DIV_SPI_CLK,
+	DIV_UART_CLK,
+	GAT_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I,
+	GAT_GPIO_PERIC_IPCLKPORT_OSCCLK,
+	GAT_PERIC_ADC0_IPCLKPORT_I_OSCCLK,
+	GAT_PERIC_CMU_PERIC_IPCLKPORT_PCLK,
+	GAT_PERIC_PWM0_IPCLKPORT_I_OSCCLK,
+	GAT_PERIC_PWM1_IPCLKPORT_I_OSCCLK,
+	GAT_ASYNC_APB_DMA0_IPCLKPORT_PCLKM,
+	GAT_ASYNC_APB_DMA0_IPCLKPORT_PCLKS,
+	GAT_ASYNC_APB_DMA1_IPCLKPORT_PCLKM,
+	GAT_ASYNC_APB_DMA1_IPCLKPORT_PCLKS,
+	GAT_AXI2APB_PERIC0_IPCLKPORT_ACLK,
+	GAT_AXI2APB_PERIC1_IPCLKPORT_ACLK,
+	GAT_AXI2APB_PERIC2_IPCLKPORT_ACLK,
+	GAT_BUS_D_PERIC_IPCLKPORT_DMACLK,
+	GAT_BUS_D_PERIC_IPCLKPORT_EQOSCLK,
+	GAT_BUS_D_PERIC_IPCLKPORT_MAINCLK,
+	GAT_BUS_P_PERIC_IPCLKPORT_EQOSCLK,
+	GAT_BUS_P_PERIC_IPCLKPORT_MAINCLK,
+	GAT_BUS_P_PERIC_IPCLKPORT_SMMUCLK,
+	GAT_EQOS_TOP_IPCLKPORT_ACLK_I,
+	GAT_EQOS_TOP_IPCLKPORT_CLK_RX_I,
+	GAT_EQOS_TOP_IPCLKPORT_HCLK_I,
+	GAT_EQOS_TOP_IPCLKPORT_RGMII_CLK_I,
+	GAT_EQOS_TOP_IPCLKPORT_RII_CLK_I,
+	GAT_EQOS_TOP_IPCLKPORT_RMII_CLK_I,
+	GAT_GPIO_PERIC_IPCLKPORT_PCLK,
+	GAT_NS_BRDG_PERIC_IPCLKPORT_CLK__PSOC_PERIC__CLK_PERIC_D,
+	GAT_NS_BRDG_PERIC_IPCLKPORT_CLK__PSOC_PERIC__CLK_PERIC_P,
+	GAT_PERIC_ADC0_IPCLKPORT_PCLK_S0,
+	GAT_PERIC_DMA0_IPCLKPORT_ACLK,
+	GAT_PERIC_DMA1_IPCLKPORT_ACLK,
+	GAT_PERIC_I2C0_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C1_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C2_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C3_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C4_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C5_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C6_IPCLKPORT_I_PCLK,
+	GAT_PERIC_I2C7_IPCLKPORT_I_PCLK,
+	GAT_PERIC_MCAN0_IPCLKPORT_CCLK,
+	GAT_PERIC_MCAN0_IPCLKPORT_PCLK,
+	GAT_PERIC_MCAN1_IPCLKPORT_CCLK,
+	GAT_PERIC_MCAN1_IPCLKPORT_PCLK,
+	GAT_PERIC_MCAN2_IPCLKPORT_CCLK,
+	GAT_PERIC_MCAN2_IPCLKPORT_PCLK,
+	GAT_PERIC_MCAN3_IPCLKPORT_CCLK,
+	GAT_PERIC_MCAN3_IPCLKPORT_PCLK,
+	GAT_PERIC_PWM0_IPCLKPORT_I_PCLK_S0,
+	GAT_PERIC_PWM1_IPCLKPORT_I_PCLK_S0,
+	GAT_PERIC_SMMU_IPCLKPORT_CCLK,
+	GAT_PERIC_SMMU_IPCLKPORT_PERIC_BCLK,
+	GAT_PERIC_SPI0_IPCLKPORT_I_PCLK,
+	GAT_PERIC_SPI0_IPCLKPORT_I_SCLK_SPI,
+	GAT_PERIC_SPI1_IPCLKPORT_I_PCLK,
+	GAT_PERIC_SPI1_IPCLKPORT_I_SCLK_SPI,
+	GAT_PERIC_SPI2_IPCLKPORT_I_PCLK,
+	GAT_PERIC_SPI2_IPCLKPORT_I_SCLK_SPI,
+	GAT_PERIC_TDM0_IPCLKPORT_HCLK_M,
+	GAT_PERIC_TDM0_IPCLKPORT_PCLK,
+	GAT_PERIC_TDM1_IPCLKPORT_HCLK_M,
+	GAT_PERIC_TDM1_IPCLKPORT_PCLK,
+	GAT_PERIC_UART0_IPCLKPORT_I_SCLK_UART,
+	GAT_PERIC_UART0_IPCLKPORT_PCLK,
+	GAT_PERIC_UART1_IPCLKPORT_I_SCLK_UART,
+	GAT_PERIC_UART1_IPCLKPORT_PCLK,
+	GAT_SYSREG_PERI_IPCLKPORT_PCLK,
+};
+
+static const struct samsung_fixed_rate_clock peric_fixed_clks[] __initconst = {
+	FRATE(PERIC_EQOS_PHYRXCLK, "eqos_phyrxclk", NULL, 0, 125000000),
+};
+
+/* List of parent clocks for Muxes in CMU_PERIC */
+PNAME(mout_peric_dmaclk_p) = { "fin_pll", "cmu_peric_shared1div4_dmaclk_gate" };
+PNAME(mout_peric_eqos_busclk_p) = { "fin_pll", "dout_cmu_pll_shared0_div4" };
+PNAME(mout_peric_pclk_p) = { "fin_pll", "dout_cmu_peric_shared1div36" };
+PNAME(mout_peric_tbuclk_p) = { "fin_pll", "dout_cmu_peric_shared0div3_tbuclk" };
+PNAME(mout_peric_spi_clk_p) = { "fin_pll", "dout_cmu_peric_shared0div20" };
+PNAME(mout_peric_spi_pclk_p) = { "fin_pll", "dout_cmu_peric_shared1div36" };
+PNAME(mout_peric_uart_clk_p) = { "fin_pll", "dout_cmu_peric_shared1div4_dmaclk" };
+PNAME(mout_peric_uart_pclk_p) = { "fin_pll", "dout_cmu_peric_shared1div36" };
+PNAME(mout_peric_eqos_phyrxclk_p) = { "dout_peric_rgmii_clk", "eqos_phyrxclk" };
+
+static const struct samsung_mux_clock peric_mux_clks[] __initconst = {
+	MUX(0, "mout_peric_dmaclk", mout_peric_dmaclk_p, PLL_CON0_PERIC_DMACLK_MUX, 4, 1),
+	MUX(0, "mout_peric_eqos_busclk", mout_peric_eqos_busclk_p,
+	    PLL_CON0_PERIC_EQOS_BUSCLK_MUX, 4, 1),
+	MUX(0, "mout_peric_pclk", mout_peric_pclk_p, PLL_CON0_PERIC_PCLK_MUX, 4, 1),
+	MUX(0, "mout_peric_tbuclk", mout_peric_tbuclk_p, PLL_CON0_PERIC_TBUCLK_MUX, 4, 1),
+	MUX(0, "mout_peric_spi_clk", mout_peric_spi_clk_p, PLL_CON0_SPI_CLK, 4, 1),
+	MUX(0, "mout_peric_spi_pclk", mout_peric_spi_pclk_p, PLL_CON0_SPI_PCLK, 4, 1),
+	MUX(0, "mout_peric_uart_clk", mout_peric_uart_clk_p, PLL_CON0_UART_CLK, 4, 1),
+	MUX(0, "mout_peric_uart_pclk", mout_peric_uart_pclk_p, PLL_CON0_UART_PCLK, 4, 1),
+	MUX(PERIC_EQOS_PHYRXCLK_MUX, "mout_peric_eqos_phyrxclk", mout_peric_eqos_phyrxclk_p,
+		MUX_PERIC_EQOS_PHYRXCLK, 0, 1),
+};
+
+static const struct samsung_div_clock peric_div_clks[] __initconst = {
+	DIV(0, "dout_peric_eqos_busclk", "mout_peric_eqos_busclk", DIV_EQOS_BUSCLK, 0, 4),
+	DIV(0, "dout_peric_mcan_clk", "mout_peric_dmaclk", DIV_PERIC_MCAN_CLK, 0, 4),
+	DIV(PERIC_DOUT_RGMII_CLK, "dout_peric_rgmii_clk", "mout_peric_eqos_busclk",
+		DIV_RGMII_CLK, 0, 4),
+	DIV(0, "dout_peric_rii_clk", "dout_peric_rmii_clk", DIV_RII_CLK, 0, 4),
+	DIV(0, "dout_peric_rmii_clk", "dout_peric_rgmii_clk", DIV_RMII_CLK, 0, 4),
+	DIV(0, "dout_peric_spi_clk", "mout_peric_spi_clk", DIV_SPI_CLK, 0, 6),
+	DIV(0, "dout_peric_uart_clk", "mout_peric_uart_clk", DIV_UART_CLK, 0, 6),
+};
+
+static const struct samsung_gate_clock peric_gate_clks[] __initconst = {
+	GATE(PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I, "peric_eqos_top_ipclkport_clk_ptp_ref_i",
+	     "fin_pll", GAT_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_gpio_peric_ipclkport_oscclk", "fin_pll", GAT_GPIO_PERIC_IPCLKPORT_OSCCLK,
+	     21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_ADCIF, "peric_adc0_ipclkport_i_oscclk", "fin_pll",
+	     GAT_PERIC_ADC0_IPCLKPORT_I_OSCCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_cmu_peric_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_CMU_PERIC_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_pwm0_ipclkport_i_oscclk", "fin_pll", GAT_PERIC_PWM0_IPCLKPORT_I_OSCCLK, 21,
+	     CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_pwm1_ipclkport_i_oscclk", "fin_pll", GAT_PERIC_PWM1_IPCLKPORT_I_OSCCLK, 21,
+	     CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_async_apb_dma0_ipclkport_pclkm", "mout_peric_dmaclk",
+	     GAT_ASYNC_APB_DMA0_IPCLKPORT_PCLKM, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_async_apb_dma0_ipclkport_pclks", "mout_peric_pclk",
+	     GAT_ASYNC_APB_DMA0_IPCLKPORT_PCLKS, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_async_apb_dma1_ipclkport_pclkm", "mout_peric_dmaclk",
+	     GAT_ASYNC_APB_DMA1_IPCLKPORT_PCLKM, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_async_apb_dma1_ipclkport_pclks", "mout_peric_pclk",
+	     GAT_ASYNC_APB_DMA1_IPCLKPORT_PCLKS, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_axi2apb_peric0_ipclkport_aclk", "mout_peric_pclk",
+	     GAT_AXI2APB_PERIC0_IPCLKPORT_ACLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_axi2apb_peric1_ipclkport_aclk", "mout_peric_pclk",
+	     GAT_AXI2APB_PERIC1_IPCLKPORT_ACLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_axi2apb_peric2_ipclkport_aclk", "mout_peric_pclk",
+	     GAT_AXI2APB_PERIC2_IPCLKPORT_ACLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_bus_d_peric_ipclkport_dmaclk", "mout_peric_dmaclk",
+	     GAT_BUS_D_PERIC_IPCLKPORT_DMACLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK, "peric_bus_d_peric_ipclkport_eqosclk",
+	     "dout_peric_eqos_busclk", GAT_BUS_D_PERIC_IPCLKPORT_EQOSCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_bus_d_peric_ipclkport_mainclk", "mout_peric_tbuclk",
+	     GAT_BUS_D_PERIC_IPCLKPORT_MAINCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK, "peric_bus_p_peric_ipclkport_eqosclk",
+	     "dout_peric_eqos_busclk", GAT_BUS_P_PERIC_IPCLKPORT_EQOSCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_bus_p_peric_ipclkport_mainclk", "mout_peric_pclk",
+	     GAT_BUS_P_PERIC_IPCLKPORT_MAINCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_bus_p_peric_ipclkport_smmuclk", "mout_peric_tbuclk",
+	     GAT_BUS_P_PERIC_IPCLKPORT_SMMUCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_EQOS_TOP_IPCLKPORT_ACLK_I, "peric_eqos_top_ipclkport_aclk_i",
+	     "dout_peric_eqos_busclk", GAT_EQOS_TOP_IPCLKPORT_ACLK_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I, "peric_eqos_top_ipclkport_clk_rx_i",
+	     "mout_peric_eqos_phyrxclk", GAT_EQOS_TOP_IPCLKPORT_CLK_RX_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_EQOS_TOP_IPCLKPORT_HCLK_I, "peric_eqos_top_ipclkport_hclk_i",
+	     "dout_peric_eqos_busclk", GAT_EQOS_TOP_IPCLKPORT_HCLK_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I, "peric_eqos_top_ipclkport_rgmii_clk_i",
+	     "dout_peric_rgmii_clk", GAT_EQOS_TOP_IPCLKPORT_RGMII_CLK_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_eqos_top_ipclkport_rii_clk_i", "dout_peric_rii_clk",
+	     GAT_EQOS_TOP_IPCLKPORT_RII_CLK_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_eqos_top_ipclkport_rmii_clk_i", "dout_peric_rmii_clk",
+	     GAT_EQOS_TOP_IPCLKPORT_RMII_CLK_I, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_gpio_peric_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_GPIO_PERIC_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_ns_brdg_peric_ipclkport_clk__psoc_peric__clk_peric_d", "mout_peric_tbuclk",
+	     GAT_NS_BRDG_PERIC_IPCLKPORT_CLK__PSOC_PERIC__CLK_PERIC_D, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_ns_brdg_peric_ipclkport_clk__psoc_peric__clk_peric_p", "mout_peric_pclk",
+	     GAT_NS_BRDG_PERIC_IPCLKPORT_CLK__PSOC_PERIC__CLK_PERIC_P, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_adc0_ipclkport_pclk_s0", "mout_peric_pclk",
+	     GAT_PERIC_ADC0_IPCLKPORT_PCLK_S0, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_DMA0_IPCLKPORT_ACLK, "peric_dma0_ipclkport_aclk", "mout_peric_dmaclk",
+	     GAT_PERIC_DMA0_IPCLKPORT_ACLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_DMA1_IPCLKPORT_ACLK, "peric_dma1_ipclkport_aclk", "mout_peric_dmaclk",
+	     GAT_PERIC_DMA1_IPCLKPORT_ACLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C0, "peric_i2c0_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C0_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C1, "peric_i2c1_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C1_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C2, "peric_i2c2_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C2_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C3, "peric_i2c3_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C3_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C4, "peric_i2c4_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C4_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C5, "peric_i2c5_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C5_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C6, "peric_i2c6_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C6_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_HSI2C7, "peric_i2c7_ipclkport_i_pclk", "mout_peric_pclk",
+	     GAT_PERIC_I2C7_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN0_IPCLKPORT_CCLK, "peric_mcan0_ipclkport_cclk", "dout_peric_mcan_clk",
+	     GAT_PERIC_MCAN0_IPCLKPORT_CCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN0_IPCLKPORT_PCLK, "peric_mcan0_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_MCAN0_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN1_IPCLKPORT_CCLK, "peric_mcan1_ipclkport_cclk", "dout_peric_mcan_clk",
+	     GAT_PERIC_MCAN1_IPCLKPORT_CCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN1_IPCLKPORT_PCLK, "peric_mcan1_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_MCAN1_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN2_IPCLKPORT_CCLK, "peric_mcan2_ipclkport_cclk", "dout_peric_mcan_clk",
+	     GAT_PERIC_MCAN2_IPCLKPORT_CCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN2_IPCLKPORT_PCLK, "peric_mcan2_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_MCAN2_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN3_IPCLKPORT_CCLK, "peric_mcan3_ipclkport_cclk", "dout_peric_mcan_clk",
+	     GAT_PERIC_MCAN3_IPCLKPORT_CCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_MCAN3_IPCLKPORT_PCLK, "peric_mcan3_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_MCAN3_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PWM0_IPCLKPORT_I_PCLK_S0, "peric_pwm0_ipclkport_i_pclk_s0", "mout_peric_pclk",
+	     GAT_PERIC_PWM0_IPCLKPORT_I_PCLK_S0, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PWM1_IPCLKPORT_I_PCLK_S0, "peric_pwm1_ipclkport_i_pclk_s0", "mout_peric_pclk",
+	     GAT_PERIC_PWM1_IPCLKPORT_I_PCLK_S0, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_smmu_ipclkport_cclk", "mout_peric_tbuclk",
+	     GAT_PERIC_SMMU_IPCLKPORT_CCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_smmu_ipclkport_peric_bclk", "mout_peric_tbuclk",
+	     GAT_PERIC_SMMU_IPCLKPORT_PERIC_BCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_SPI0, "peric_spi0_ipclkport_i_pclk", "mout_peric_spi_pclk",
+	     GAT_PERIC_SPI0_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_SCLK_SPI0, "peric_spi0_ipclkport_i_sclk_spi", "dout_peric_spi_clk",
+	     GAT_PERIC_SPI0_IPCLKPORT_I_SCLK_SPI, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_SPI1, "peric_spi1_ipclkport_i_pclk", "mout_peric_spi_pclk",
+	     GAT_PERIC_SPI1_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_SCLK_SPI1, "peric_spi1_ipclkport_i_sclk_spi", "dout_peric_spi_clk",
+	     GAT_PERIC_SPI1_IPCLKPORT_I_SCLK_SPI, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_SPI2, "peric_spi2_ipclkport_i_pclk", "mout_peric_spi_pclk",
+	     GAT_PERIC_SPI2_IPCLKPORT_I_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_SCLK_SPI2, "peric_spi2_ipclkport_i_sclk_spi", "dout_peric_spi_clk",
+	     GAT_PERIC_SPI2_IPCLKPORT_I_SCLK_SPI, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_HCLK_TDM0, "peric_tdm0_ipclkport_hclk_m", "mout_peric_pclk",
+	     GAT_PERIC_TDM0_IPCLKPORT_HCLK_M, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_TDM0, "peric_tdm0_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_TDM0_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_HCLK_TDM1, "peric_tdm1_ipclkport_hclk_m", "mout_peric_pclk",
+	     GAT_PERIC_TDM1_IPCLKPORT_HCLK_M, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_TDM1, "peric_tdm1_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_PERIC_TDM1_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_SCLK_UART0, "peric_uart0_ipclkport_i_sclk_uart", "dout_peric_uart_clk",
+	     GAT_PERIC_UART0_IPCLKPORT_I_SCLK_UART, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_UART0, "peric_uart0_ipclkport_pclk", "mout_peric_uart_pclk",
+	     GAT_PERIC_UART0_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_SCLK_UART1, "peric_uart1_ipclkport_i_sclk_uart", "dout_peric_uart_clk",
+	     GAT_PERIC_UART1_IPCLKPORT_I_SCLK_UART, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(PERIC_PCLK_UART1, "peric_uart1_ipclkport_pclk", "mout_peric_uart_pclk",
+	     GAT_PERIC_UART1_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "peric_sysreg_peri_ipclkport_pclk", "mout_peric_pclk",
+	     GAT_SYSREG_PERI_IPCLKPORT_PCLK, 21, CLK_IGNORE_UNUSED, 0),
+};
+
+static const struct samsung_cmu_info peric_cmu_info __initconst = {
+	.mux_clks		= peric_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(peric_mux_clks),
+	.div_clks		= peric_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(peric_div_clks),
+	.gate_clks		= peric_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(peric_gate_clks),
+	.fixed_clks		= peric_fixed_clks,
+	.nr_fixed_clks		= ARRAY_SIZE(peric_fixed_clks),
+	.nr_clk_ids		= PERIC_NR_CLK,
+	.clk_regs		= peric_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(peric_clk_regs),
+	.clk_name		= "dout_cmu_pll_shared0_div4",
+};
+
+/**
+ * fsd_cmu_probe - Probe function for FSD platform clocks
+ * @pdev: Pointer to platform device
+ *
+ * Configure clock hierarchy for clock domains of FSD platform
+ */
+static int __init fsd_cmu_probe(struct platform_device *pdev)
+{
+	const struct samsung_cmu_info *info;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	info = of_device_get_match_data(dev);
+	fsd_init_clocks(np, info->clk_regs, info->nr_clk_regs);
+	samsung_cmu_register_one(np, info);
+
+	/* Keep bus clock running, so it's possible to access CMU registers */
+	if (info->clk_name) {
+		struct clk *bus_clk;
+
+		bus_clk = clk_get(dev, info->clk_name);
+		if (IS_ERR(bus_clk)) {
+			pr_err("%s: could not find bus clock %s; err = %ld\n",
+			       __func__, info->clk_name, PTR_ERR(bus_clk));
+		} else {
+			clk_prepare_enable(bus_clk);
+		}
+	}
+
+	return 0;
+}
+
+/* CMUs which belong to Power Domains and need runtime PM to be implemented */
+static const struct of_device_id fsd_cmu_of_match[] = {
+	{
+		.compatible = "tesla,fsd-clock-peric",
+		.data = &peric_cmu_info,
+	}, {
+	},
+};
+
+static struct platform_driver fsd_cmu_driver __refdata = {
+	.driver	= {
+		.name = "fsd-cmu",
+		.of_match_table = fsd_cmu_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = fsd_cmu_probe,
+};
+
+static int __init fsd_cmu_init(void)
+{
+	return platform_driver_register(&fsd_cmu_driver);
+}
+core_initcall(fsd_cmu_init);