| Message ID | 20220114170941.800068-2-sean.anderson@seco.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | usb: phy: generic: Support enabling/disabling VBUS | expand |
On Fri, 14 Jan 2022 12:09:38 -0500, Sean Anderson wrote: > The vbus-regulator property was never actually read from the device tree. > Introduce a new property vbus-supply to represent the regulator powering > the VBUS when acting as an A-Device. This supply will be enabled and > disabled as necessary. Note that this is different from vbus-regulator, > which represented the available current available to draw from VBUS in > B-Device mode. Because no one was using vbus-regulator, remove it. > > Signed-off-by: Sean Anderson <sean.anderson@seco.com> > --- > > Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml:37:15: [error] empty value in block mapping (empty-values) ./Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml:40:9: [error] syntax error: mapping values are not allowed here (syntax) dtschema/dtc warnings/errors: make[1]: *** Deleting file 'Documentation/devicetree/bindings/usb/usb-nop-xceiv.example.dts' Traceback (most recent call last): File "/usr/local/bin/dt-extract-example", line 46, in <module> binding = yaml.load(open(args.yamlfile, encoding='utf-8').read()) File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 434, in load return constructor.get_single_data() File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 119, in get_single_data node = self.composer.get_single_node() File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node File "_ruamel_yaml.pyx", line 891, in _ruamel_yaml.CParser._compose_mapping_node File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event ruamel.yaml.scanner.ScannerError: mapping values are not allowed in this context in "<unicode string>", line 40, column 9 make[1]: *** [Documentation/devicetree/bindings/Makefile:25: Documentation/devicetree/bindings/usb/usb-nop-xceiv.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml: mapping values are not allowed in this context in "<unicode string>", line 40, column 9 /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml: ignoring, error parsing file make: *** [Makefile:1413: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1580217 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml index 2824c17285ee..a79459bb5a4c 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -34,9 +34,9 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specifiy the regulator supplying current drawn from - the VBus line. + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. $ref: /schemas/types.yaml#/definitions/phandle required: @@ -57,7 +57,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; };
The vbus-regulator property was never actually read from the device tree. Introduce a new property vbus-supply to represent the regulator powering the VBUS when acting as an A-Device. This supply will be enabled and disabled as necessary. Note that this is different from vbus-regulator, which represented the available current available to draw from VBUS in B-Device mode. Because no one was using vbus-regulator, remove it. Signed-off-by: Sean Anderson <sean.anderson@seco.com> --- Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)