| Message ID | 20220112151814.24361-9-pali@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: mvebu: subsystem ids, AER and INTx | expand |
On Wed, Jan 12, 2022 at 04:18:11PM +0100, Pali Rohár wrote: > Split struct pci_ops between ops and child_ops. Member ops is used for > accessing PCIe Root Ports via pci-bridge-emul.c driver and child_ops for > accessing real PCIe cards. > > There is no need to mix these two struct pci_ops into one as PCI core code > already provides separate callbacks via bridge->ops and bridge->child_ops. > > Signed-off-by: Pali Rohár <pali@kernel.org> > --- > drivers/pci/controller/pci-mvebu.c | 82 ++++++++++++++++-------------- > 1 file changed, 44 insertions(+), 38 deletions(-) > > diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c > index 9ea2f6a7c2b0..1e90ab888075 100644 > --- a/drivers/pci/controller/pci-mvebu.c > +++ b/drivers/pci/controller/pci-mvebu.c > @@ -294,11 +294,29 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) > mvebu_writel(port, mask, PCIE_MASK_OFF); > } > > -static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, > - struct pci_bus *bus, > - u32 devfn, int where, int size, u32 *val) > +static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, > + struct pci_bus *bus, > + int devfn); > + > +static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where, > + int size, u32 *val) > { > - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; > + struct mvebu_pcie *pcie = bus->sysdata; > + struct mvebu_pcie_port *port; > + void __iomem *conf_data; > + > + port = mvebu_pcie_find_port(pcie, bus, devfn); > + if (!port) { > + *val = 0xffffffff; > + return PCIBIOS_DEVICE_NOT_FOUND; > + } > + > + if (!mvebu_pcie_link_up(port)) { > + *val = 0xffffffff; > + return PCIBIOS_DEVICE_NOT_FOUND; > + } > + > + conf_data = port->base + PCIE_CONF_DATA_OFF; > > mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), > PCIE_CONF_ADDR_OFF); > @@ -321,11 +339,21 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, > return PCIBIOS_SUCCESSFUL; > } > > -static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, > - struct pci_bus *bus, > - u32 devfn, int where, int size, u32 val) > +static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn, > + int where, int size, u32 val) > { > - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; > + struct mvebu_pcie *pcie = bus->sysdata; > + struct mvebu_pcie_port *port; > + void __iomem *conf_data; > + > + port = mvebu_pcie_find_port(pcie, bus, devfn); > + if (!port) > + return PCIBIOS_DEVICE_NOT_FOUND; > + > + if (!mvebu_pcie_link_up(port)) > + return PCIBIOS_DEVICE_NOT_FOUND; > + > + conf_data = port->base + PCIE_CONF_DATA_OFF; Again, the same setup code in read and write is a sign to use .map_bus(). You can copy it from my version I pointed you to. Rob
On Thursday 20 January 2022 10:49:05 Rob Herring wrote: > On Wed, Jan 12, 2022 at 04:18:11PM +0100, Pali Rohár wrote: > > Split struct pci_ops between ops and child_ops. Member ops is used for > > accessing PCIe Root Ports via pci-bridge-emul.c driver and child_ops for > > accessing real PCIe cards. > > > > There is no need to mix these two struct pci_ops into one as PCI core code > > already provides separate callbacks via bridge->ops and bridge->child_ops. > > > > Signed-off-by: Pali Rohár <pali@kernel.org> > > --- > > drivers/pci/controller/pci-mvebu.c | 82 ++++++++++++++++-------------- > > 1 file changed, 44 insertions(+), 38 deletions(-) > > > > diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c > > index 9ea2f6a7c2b0..1e90ab888075 100644 > > --- a/drivers/pci/controller/pci-mvebu.c > > +++ b/drivers/pci/controller/pci-mvebu.c > > @@ -294,11 +294,29 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) > > mvebu_writel(port, mask, PCIE_MASK_OFF); > > } > > > > -static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, > > - struct pci_bus *bus, > > - u32 devfn, int where, int size, u32 *val) > > +static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, > > + struct pci_bus *bus, > > + int devfn); > > + > > +static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where, > > + int size, u32 *val) > > { > > - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; > > + struct mvebu_pcie *pcie = bus->sysdata; > > + struct mvebu_pcie_port *port; > > + void __iomem *conf_data; > > + > > + port = mvebu_pcie_find_port(pcie, bus, devfn); > > + if (!port) { > > + *val = 0xffffffff; > > + return PCIBIOS_DEVICE_NOT_FOUND; > > + } > > + > > + if (!mvebu_pcie_link_up(port)) { > > + *val = 0xffffffff; > > + return PCIBIOS_DEVICE_NOT_FOUND; > > + } > > + > > + conf_data = port->base + PCIE_CONF_DATA_OFF; > > > > mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), > > PCIE_CONF_ADDR_OFF); > > @@ -321,11 +339,21 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, > > return PCIBIOS_SUCCESSFUL; > > } > > > > -static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, > > - struct pci_bus *bus, > > - u32 devfn, int where, int size, u32 val) > > +static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn, > > + int where, int size, u32 val) > > { > > - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; > > + struct mvebu_pcie *pcie = bus->sysdata; > > + struct mvebu_pcie_port *port; > > + void __iomem *conf_data; > > + > > > + port = mvebu_pcie_find_port(pcie, bus, devfn); > > + if (!port) > > + return PCIBIOS_DEVICE_NOT_FOUND; > > + > > + if (!mvebu_pcie_link_up(port)) > > + return PCIBIOS_DEVICE_NOT_FOUND; > > + > > + conf_data = port->base + PCIE_CONF_DATA_OFF; > > Again, the same setup code in read and write is a sign to use > .map_bus(). You can copy it from my version I pointed you to. > > Rob I'm planning to do other cleanup in followup patches. But there are too many mvebu and aardvark patches on the list waiting, and I do not want to send another batch.
On Thu, Jan 20, 2022 at 10:55 AM Pali Rohár <pali@kernel.org> wrote: > > On Thursday 20 January 2022 10:49:05 Rob Herring wrote: > > On Wed, Jan 12, 2022 at 04:18:11PM +0100, Pali Rohár wrote: > > > Split struct pci_ops between ops and child_ops. Member ops is used for > > > accessing PCIe Root Ports via pci-bridge-emul.c driver and child_ops for > > > accessing real PCIe cards. > > > > > > There is no need to mix these two struct pci_ops into one as PCI core code > > > already provides separate callbacks via bridge->ops and bridge->child_ops. > > > > > > Signed-off-by: Pali Rohár <pali@kernel.org> > > > --- > > > drivers/pci/controller/pci-mvebu.c | 82 ++++++++++++++++-------------- > > > 1 file changed, 44 insertions(+), 38 deletions(-) > > > > > > diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c > > > index 9ea2f6a7c2b0..1e90ab888075 100644 > > > --- a/drivers/pci/controller/pci-mvebu.c > > > +++ b/drivers/pci/controller/pci-mvebu.c > > > @@ -294,11 +294,29 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) > > > mvebu_writel(port, mask, PCIE_MASK_OFF); > > > } > > > > > > -static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, > > > - struct pci_bus *bus, > > > - u32 devfn, int where, int size, u32 *val) > > > +static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, > > > + struct pci_bus *bus, > > > + int devfn); > > > + > > > +static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where, > > > + int size, u32 *val) > > > { > > > - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; > > > + struct mvebu_pcie *pcie = bus->sysdata; > > > + struct mvebu_pcie_port *port; > > > + void __iomem *conf_data; > > > + > > > + port = mvebu_pcie_find_port(pcie, bus, devfn); > > > + if (!port) { > > > + *val = 0xffffffff; > > > + return PCIBIOS_DEVICE_NOT_FOUND; > > > + } > > > + > > > + if (!mvebu_pcie_link_up(port)) { > > > + *val = 0xffffffff; > > > + return PCIBIOS_DEVICE_NOT_FOUND; > > > + } > > > + > > > + conf_data = port->base + PCIE_CONF_DATA_OFF; > > > > > > mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), > > > PCIE_CONF_ADDR_OFF); > > > @@ -321,11 +339,21 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, > > > return PCIBIOS_SUCCESSFUL; > > > } > > > > > > -static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, > > > - struct pci_bus *bus, > > > - u32 devfn, int where, int size, u32 val) > > > +static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn, > > > + int where, int size, u32 val) > > > { > > > - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; > > > + struct mvebu_pcie *pcie = bus->sysdata; > > > + struct mvebu_pcie_port *port; > > > + void __iomem *conf_data; > > > + > > > > > + port = mvebu_pcie_find_port(pcie, bus, devfn); > > > + if (!port) > > > + return PCIBIOS_DEVICE_NOT_FOUND; > > > + > > > + if (!mvebu_pcie_link_up(port)) > > > + return PCIBIOS_DEVICE_NOT_FOUND; > > > + > > > + conf_data = port->base + PCIE_CONF_DATA_OFF; > > > > Again, the same setup code in read and write is a sign to use > > .map_bus(). You can copy it from my version I pointed you to. > > > > Rob > > I'm planning to do other cleanup in followup patches. But there are too > many mvebu and aardvark patches on the list waiting, and I do not want > to send another batch. It can all be part of this patch. Rob
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index 9ea2f6a7c2b0..1e90ab888075 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -294,11 +294,29 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) mvebu_writel(port, mask, PCIE_MASK_OFF); } -static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, - struct pci_bus *bus, - u32 devfn, int where, int size, u32 *val) +static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, + struct pci_bus *bus, + int devfn); + +static int mvebu_pcie_child_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) { - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; + struct mvebu_pcie *pcie = bus->sysdata; + struct mvebu_pcie_port *port; + void __iomem *conf_data; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (!mvebu_pcie_link_up(port)) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + conf_data = port->base + PCIE_CONF_DATA_OFF; mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), PCIE_CONF_ADDR_OFF); @@ -321,11 +339,21 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, return PCIBIOS_SUCCESSFUL; } -static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, - struct pci_bus *bus, - u32 devfn, int where, int size, u32 val) +static int mvebu_pcie_child_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) { - void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; + struct mvebu_pcie *pcie = bus->sysdata; + struct mvebu_pcie_port *port; + void __iomem *conf_data; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (!mvebu_pcie_link_up(port)) + return PCIBIOS_DEVICE_NOT_FOUND; + + conf_data = port->base + PCIE_CONF_DATA_OFF; mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), PCIE_CONF_ADDR_OFF); @@ -347,6 +375,11 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, return PCIBIOS_SUCCESSFUL; } +static struct pci_ops mvebu_pcie_child_ops = { + .read = mvebu_pcie_child_rd_conf, + .write = mvebu_pcie_child_wr_conf, +}; + /* * Remove windows, starting from the largest ones to the smallest * ones. @@ -862,25 +895,12 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, { struct mvebu_pcie *pcie = bus->sysdata; struct mvebu_pcie_port *port; - int ret; port = mvebu_pcie_find_port(pcie, bus, devfn); if (!port) return PCIBIOS_DEVICE_NOT_FOUND; - /* Access the emulated PCI-to-PCI bridge */ - if (bus->number == 0) - return pci_bridge_emul_conf_write(&port->bridge, where, - size, val); - - if (!mvebu_pcie_link_up(port)) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* Access the real PCIe interface */ - ret = mvebu_pcie_hw_wr_conf(port, bus, devfn, - where, size, val); - - return ret; + return pci_bridge_emul_conf_write(&port->bridge, where, size, val); } /* PCI configuration space read function */ @@ -889,7 +909,6 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, { struct mvebu_pcie *pcie = bus->sysdata; struct mvebu_pcie_port *port; - int ret; port = mvebu_pcie_find_port(pcie, bus, devfn); if (!port) { @@ -897,21 +916,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, return PCIBIOS_DEVICE_NOT_FOUND; } - /* Access the emulated PCI-to-PCI bridge */ - if (bus->number == 0) - return pci_bridge_emul_conf_read(&port->bridge, where, - size, val); - - if (!mvebu_pcie_link_up(port)) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - /* Access the real PCIe interface */ - ret = mvebu_pcie_hw_rd_conf(port, bus, devfn, - where, size, val); - - return ret; + return pci_bridge_emul_conf_read(&port->bridge, where, size, val); } static struct pci_ops mvebu_pcie_ops = { @@ -1421,6 +1426,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev) bridge->sysdata = pcie; bridge->ops = &mvebu_pcie_ops; + bridge->child_ops = &mvebu_pcie_child_ops; bridge->align_resource = mvebu_pcie_align_resource; bridge->map_irq = mvebu_pcie_map_irq;
Split struct pci_ops between ops and child_ops. Member ops is used for accessing PCIe Root Ports via pci-bridge-emul.c driver and child_ops for accessing real PCIe cards. There is no need to mix these two struct pci_ops into one as PCI core code already provides separate callbacks via bridge->ops and bridge->child_ops. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/pci/controller/pci-mvebu.c | 82 ++++++++++++++++-------------- 1 file changed, 44 insertions(+), 38 deletions(-)