[v10,0/4] clk: meson: add a sub EMMC clock controller support

Message

Liang Yang Jan. 21, 2022, 7:45 a.m. UTC

This driver will add a MMC clock controller driver support.
The original idea about adding a clock controller is during the
discussion in the NAND driver mainline effort[1].

This driver is tested in the S400 board (AXG platform) with NAND driver.

Changes since v9 [10]
 - use clk_parent_data instead of parent_names

Changes since v8 [9]
 - use MESON_SCLK_ONE_BASED instead of CLK_DIVIDER_ONE_BASED
 - use struct_size to caculate onecell_data
 - add clk-phase-delay.h
 - define CLK_DELAY_STEP_PS_GX and CLK_DELAY_STEP_PS_AXG

Changes since v7 [8]
 - move meson_clk_get_phase_delay_data() from header to driver
 - CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
 - remove onecell date and ID for internal MUX clk
 - use helper for functions for ONE_BASED in sclk-div
 - add ONE_BASED support for duty cycle

Changes since v6 [7]:
 - add one based support for sclk divier
 - alloc sclk in probe for multiple instance
 - fix coding styles

Changes since v5 [6]:
 - remove divider ops with .init and use sclk_div instead
 - drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
 - drop the useless type cast 

Changes since v4 [5]:
 - use struct parm in phase delay driver
 - remove 0 delay releted part in phase delay driver
 - don't rebuild the parent name once again
 - add divider ops with .init

Changes since v3 [4]:
 - separate clk-phase-delay driver
 - replace clk_get_rate() with clk_hw_get_rate()
 - collect Rob's R-Y
 - drop 'meson-' prefix from compatible string

 Changes since v2 [3]:
 - squash dt-binding clock-id patch
 - update license
 - fix alignment
 - construct a clk register helper() function

Changes since v1 [2]:
 - implement phase clock
 - update compatible name
 - adjust file name
 - divider probe() into small functions, and re-use them

[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[e-mail]
[3] https://lkml.kernel.org/r/[e-mail]
[4] https://lkml.kernel.org/r/[e-mail]
[5] https://lkml.kernel.org/r/[e-mail]
[6] https://lkml.kernel.org/r/[e-mail]
[7] https://lkml.kernel.org/r/[e-mail]
[8] https://lkml.kernel.org/r/[e-mail]
[9] https://lkml.kernel.org/r/[e-mail]
[10] https://lore.kernel.org/all/[e-mail]/
Liang Yang (4):
  clk: meson: add one based divider support for sclk
  clk: meson: add emmc sub clock phase delay driver
  clk: meson: add DT documentation for emmc clock controller
  clk: meson: add sub MMC clock controller driver

 .../bindings/clock/amlogic,mmc-clkc.yaml      |  64 ++++
 drivers/clk/meson/Kconfig                     |  18 ++
 drivers/clk/meson/Makefile                    |   2 +
 drivers/clk/meson/clk-phase-delay.c           |  69 ++++
 drivers/clk/meson/clk-phase-delay.h           |  20 ++
 drivers/clk/meson/mmc-clkc.c                  | 302 ++++++++++++++++++
 drivers/clk/meson/sclk-div.c                  |  59 ++--
 drivers/clk/meson/sclk-div.h                  |   3 +
 include/dt-bindings/clock/amlogic,mmc-clkc.h  |  14 +
 9 files changed, 529 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml
 create mode 100644 drivers/clk/meson/clk-phase-delay.c
 create mode 100644 drivers/clk/meson/clk-phase-delay.h
 create mode 100644 drivers/clk/meson/mmc-clkc.c
 create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h

Comments

Neil Armstrong Jan. 25, 2022, 2:54 p.m. UTC | #1

Hi Liang,

On 21/01/2022 08:45, Liang Yang wrote:
> This driver will add a MMC clock controller driver support.
> The original idea about adding a clock controller is during the
> discussion in the NAND driver mainline effort[1].
> 
> This driver is tested in the S400 board (AXG platform) with NAND driver.

Thanks a lot for providing a fixed and updated version of this serie.

After some chat with Jerome and Kevin, it seems the way the eMMC clock reuse
for NAND was designed nearly 4 years doesn't look accurate anymore.

Having a separate clk driver designed to replace the eMMC node when NAND is
used on the board seems over engineered.

Actually having the clock code you add in this serie _but_ directly in
the NAND looks far better, and more coherent since having Linux runtime
detection of eMMC vs NAND will never happen and even this serie required
some DT modification from the bootloader.

I'll let Jerome or Kevin add more details if they want, but I think you should resurrect
the work you pushed in [1] & [2] but:
- passing the eMMC clk registers as a third "reg" cell
- passing the same "clocks" phandle as the eMMC node
- adding the eMMC clock code in the NAND driver directly

I'm open to discussions if you consider the current approach is still superior.

Thanks,
Neil

[1] https://lore.kernel.org/r/[e-mail]
[2] https://lore.kernel.org/r/[e-mail]

> 
> Changes since v9 [10]
>  - use clk_parent_data instead of parent_names
> 
> Changes since v8 [9]
>  - use MESON_SCLK_ONE_BASED instead of CLK_DIVIDER_ONE_BASED
>  - use struct_size to caculate onecell_data
>  - add clk-phase-delay.h
>  - define CLK_DELAY_STEP_PS_GX and CLK_DELAY_STEP_PS_AXG
> 
> Changes since v7 [8]
>  - move meson_clk_get_phase_delay_data() from header to driver
>  - CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
>  - remove onecell date and ID for internal MUX clk
>  - use helper for functions for ONE_BASED in sclk-div
>  - add ONE_BASED support for duty cycle
> 
> Changes since v6 [7]:
>  - add one based support for sclk divier
>  - alloc sclk in probe for multiple instance
>  - fix coding styles
> 
> Changes since v5 [6]:
>  - remove divider ops with .init and use sclk_div instead
>  - drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
>  - drop the useless type cast 
> 
> Changes since v4 [5]:
>  - use struct parm in phase delay driver
>  - remove 0 delay releted part in phase delay driver
>  - don't rebuild the parent name once again
>  - add divider ops with .init
> 
> Changes since v3 [4]:
>  - separate clk-phase-delay driver
>  - replace clk_get_rate() with clk_hw_get_rate()
>  - collect Rob's R-Y
>  - drop 'meson-' prefix from compatible string
> 
>  Changes since v2 [3]:
>  - squash dt-binding clock-id patch
>  - update license
>  - fix alignment
>  - construct a clk register helper() function
> 
> Changes since v1 [2]:
>  - implement phase clock
>  - update compatible name
>  - adjust file name
>  - divider probe() into small functions, and re-use them
> 
> [1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
> [2] https://lkml.kernel.org/r/[e-mail]
> [3] https://lkml.kernel.org/r/[e-mail]
> [4] https://lkml.kernel.org/r/[e-mail]
> [5] https://lkml.kernel.org/r/[e-mail]
> [6] https://lkml.kernel.org/r/[e-mail]
> [7] https://lkml.kernel.org/r/[e-mail]
> [8] https://lkml.kernel.org/r/[e-mail]
> [9] https://lkml.kernel.org/r/[e-mail]
> [10] https://lore.kernel.org/all/[e-mail]/
> Liang Yang (4):
>   clk: meson: add one based divider support for sclk
>   clk: meson: add emmc sub clock phase delay driver
>   clk: meson: add DT documentation for emmc clock controller
>   clk: meson: add sub MMC clock controller driver
> 
>  .../bindings/clock/amlogic,mmc-clkc.yaml      |  64 ++++
>  drivers/clk/meson/Kconfig                     |  18 ++
>  drivers/clk/meson/Makefile                    |   2 +
>  drivers/clk/meson/clk-phase-delay.c           |  69 ++++
>  drivers/clk/meson/clk-phase-delay.h           |  20 ++
>  drivers/clk/meson/mmc-clkc.c                  | 302 ++++++++++++++++++
>  drivers/clk/meson/sclk-div.c                  |  59 ++--
>  drivers/clk/meson/sclk-div.h                  |   3 +
>  include/dt-bindings/clock/amlogic,mmc-clkc.h  |  14 +
>  9 files changed, 529 insertions(+), 22 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml
>  create mode 100644 drivers/clk/meson/clk-phase-delay.c
>  create mode 100644 drivers/clk/meson/clk-phase-delay.h
>  create mode 100644 drivers/clk/meson/mmc-clkc.c
>  create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
>

Liang Yang Jan. 26, 2022, 9:08 a.m. UTC | #2

Hi Neil,

On 2022/1/25 22:54, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> Hi Liang,
> 
> On 21/01/2022 08:45, Liang Yang wrote:
>> This driver will add a MMC clock controller driver support.
>> The original idea about adding a clock controller is during the
>> discussion in the NAND driver mainline effort[1].
>>
>> This driver is tested in the S400 board (AXG platform) with NAND driver.
> 
> Thanks a lot for providing a fixed and updated version of this serie.
> 
> After some chat with Jerome and Kevin, it seems the way the eMMC clock reuse
> for NAND was designed nearly 4 years doesn't look accurate anymore.
> 
> Having a separate clk driver designed to replace the eMMC node when NAND is
> used on the board seems over engineered.
> 
> Actually having the clock code you add in this serie _but_ directly in
> the NAND looks far better, and more coherent since having Linux runtime
> detection of eMMC vs NAND will never happen and even this serie required
> some DT modification from the bootloader.
> 
> I'll let Jerome or Kevin add more details if they want, but I think you should resurrect
> the work you pushed in [1] & [2] but:
> - passing the eMMC clk registers as a third "reg" cell
Does it just need to define a 'reg' resource in NFC node and not 
'syscon' here?
> - passing the same "clocks" phandle as the eMMC node
> - adding the eMMC clock code in the NAND driver directly
> 
> I'm open to discussions if you consider the current approach is still superior.

I don't have persuasive ideas, but really it shares the common clock 
implementation for both NFC and EMMC. and we don't need to paste the 
same code in NFC and EMMC.

> 
> Thanks,
> Neil
> 
> [1] https://lore.kernel.org/r/[e-mail]
> [2] https://lore.kernel.org/r/[e-mail]
> 
>>
>> Changes since v9 [10]
>>   - use clk_parent_data instead of parent_names
>>
>> Changes since v8 [9]
>>   - use MESON_SCLK_ONE_BASED instead of CLK_DIVIDER_ONE_BASED
>>   - use struct_size to caculate onecell_data
>>   - add clk-phase-delay.h
>>   - define CLK_DELAY_STEP_PS_GX and CLK_DELAY_STEP_PS_AXG
>>
>> Changes since v7 [8]
>>   - move meson_clk_get_phase_delay_data() from header to driver
>>   - CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
>>   - remove onecell date and ID for internal MUX clk
>>   - use helper for functions for ONE_BASED in sclk-div
>>   - add ONE_BASED support for duty cycle
>>
>> Changes since v6 [7]:
>>   - add one based support for sclk divier
>>   - alloc sclk in probe for multiple instance
>>   - fix coding styles
>>
>> Changes since v5 [6]:
>>   - remove divider ops with .init and use sclk_div instead
>>   - drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
>>   - drop the useless type cast
>>
>> Changes since v4 [5]:
>>   - use struct parm in phase delay driver
>>   - remove 0 delay releted part in phase delay driver
>>   - don't rebuild the parent name once again
>>   - add divider ops with .init
>>
>> Changes since v3 [4]:
>>   - separate clk-phase-delay driver
>>   - replace clk_get_rate() with clk_hw_get_rate()
>>   - collect Rob's R-Y
>>   - drop 'meson-' prefix from compatible string
>>
>>   Changes since v2 [3]:
>>   - squash dt-binding clock-id patch
>>   - update license
>>   - fix alignment
>>   - construct a clk register helper() function
>>
>> Changes since v1 [2]:
>>   - implement phase clock
>>   - update compatible name
>>   - adjust file name
>>   - divider probe() into small functions, and re-use them
>>
>> [1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
>> [2] https://lkml.kernel.org/r/[e-mail]
>> [3] https://lkml.kernel.org/r/[e-mail]
>> [4] https://lkml.kernel.org/r/[e-mail]
>> [5] https://lkml.kernel.org/r/[e-mail]
>> [6] https://lkml.kernel.org/r/[e-mail]
>> [7] https://lkml.kernel.org/r/[e-mail]
>> [8] https://lkml.kernel.org/r/[e-mail]
>> [9] https://lkml.kernel.org/r/[e-mail]
>> [10] https://lore.kernel.org/all/[e-mail]/
>> Liang Yang (4):
>>    clk: meson: add one based divider support for sclk
>>    clk: meson: add emmc sub clock phase delay driver
>>    clk: meson: add DT documentation for emmc clock controller
>>    clk: meson: add sub MMC clock controller driver
>>
>>   .../bindings/clock/amlogic,mmc-clkc.yaml      |  64 ++++
>>   drivers/clk/meson/Kconfig                     |  18 ++
>>   drivers/clk/meson/Makefile                    |   2 +
>>   drivers/clk/meson/clk-phase-delay.c           |  69 ++++
>>   drivers/clk/meson/clk-phase-delay.h           |  20 ++
>>   drivers/clk/meson/mmc-clkc.c                  | 302 ++++++++++++++++++
>>   drivers/clk/meson/sclk-div.c                  |  59 ++--
>>   drivers/clk/meson/sclk-div.h                  |   3 +
>>   include/dt-bindings/clock/amlogic,mmc-clkc.h  |  14 +
>>   9 files changed, 529 insertions(+), 22 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml
>>   create mode 100644 drivers/clk/meson/clk-phase-delay.c
>>   create mode 100644 drivers/clk/meson/clk-phase-delay.h
>>   create mode 100644 drivers/clk/meson/mmc-clkc.c
>>   create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
>>
> 
> .

Jerome Brunet Jan. 26, 2022, 9:14 a.m. UTC | #3

On Wed 26 Jan 2022 at 17:08, Liang Yang <[e-mail]> wrote:

> Hi Neil,
>
> On 2022/1/25 22:54, Neil Armstrong wrote:
>> [ EXTERNAL EMAIL ]
>> Hi Liang,
>> On 21/01/2022 08:45, Liang Yang wrote:
>>> This driver will add a MMC clock controller driver support.
>>> The original idea about adding a clock controller is during the
>>> discussion in the NAND driver mainline effort[1].
>>>
>>> This driver is tested in the S400 board (AXG platform) with NAND driver.
>> Thanks a lot for providing a fixed and updated version of this serie.
>> After some chat with Jerome and Kevin, it seems the way the eMMC clock
>> reuse
>> for NAND was designed nearly 4 years doesn't look accurate anymore.
>> Having a separate clk driver designed to replace the eMMC node when NAND
>> is
>> used on the board seems over engineered.
>> Actually having the clock code you add in this serie _but_ directly in
>> the NAND looks far better, and more coherent since having Linux runtime
>> detection of eMMC vs NAND will never happen and even this serie required
>> some DT modification from the bootloader.
>> I'll let Jerome or Kevin add more details if they want, but I think you
>> should resurrect
>> the work you pushed in [1] & [2] but:
>> - passing the eMMC clk registers as a third "reg" cell
> Does it just need to define a 'reg' resource in NFC node and not 'syscon'
> here?

Yes

>> - passing the same "clocks" phandle as the eMMC node
>> - adding the eMMC clock code in the NAND driver directly
>> I'm open to discussions if you consider the current approach is still
>> superior.
>
> I don't have persuasive ideas, but really it shares the common clock
> implementation for both NFC and EMMC. and we don't need to paste the 
> same code in NFC and EMMC.

You don't need to copy everything. If I understood correctly, all the
Rx/Tx should not be needed. Yes, there is some duplication as it stands but
it allows to avoid coupling the MMC and NAND driver. We can still think
about optimizing things later on. Let's get something simply working
first.

>
>> Thanks,
>> Neil
>> [1]
>> https://lore.kernel.org/r/[e-mail]
>> [2] https://lore.kernel.org/r/[e-mail]
>> 
>>>
>>> Changes since v9 [10]
>>>   - use clk_parent_data instead of parent_names
>>>
>>> Changes since v8 [9]
>>>   - use MESON_SCLK_ONE_BASED instead of CLK_DIVIDER_ONE_BASED
>>>   - use struct_size to caculate onecell_data
>>>   - add clk-phase-delay.h
>>>   - define CLK_DELAY_STEP_PS_GX and CLK_DELAY_STEP_PS_AXG
>>>
>>> Changes since v7 [8]
>>>   - move meson_clk_get_phase_delay_data() from header to driver
>>>   - CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
>>>   - remove onecell date and ID for internal MUX clk
>>>   - use helper for functions for ONE_BASED in sclk-div
>>>   - add ONE_BASED support for duty cycle
>>>
>>> Changes since v6 [7]:
>>>   - add one based support for sclk divier
>>>   - alloc sclk in probe for multiple instance
>>>   - fix coding styles
>>>
>>> Changes since v5 [6]:
>>>   - remove divider ops with .init and use sclk_div instead
>>>   - drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
>>>   - drop the useless type cast
>>>
>>> Changes since v4 [5]:
>>>   - use struct parm in phase delay driver
>>>   - remove 0 delay releted part in phase delay driver
>>>   - don't rebuild the parent name once again
>>>   - add divider ops with .init
>>>
>>> Changes since v3 [4]:
>>>   - separate clk-phase-delay driver
>>>   - replace clk_get_rate() with clk_hw_get_rate()
>>>   - collect Rob's R-Y
>>>   - drop 'meson-' prefix from compatible string
>>>
>>>   Changes since v2 [3]:
>>>   - squash dt-binding clock-id patch
>>>   - update license
>>>   - fix alignment
>>>   - construct a clk register helper() function
>>>
>>> Changes since v1 [2]:
>>>   - implement phase clock
>>>   - update compatible name
>>>   - adjust file name
>>>   - divider probe() into small functions, and re-use them
>>>
>>> [1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
>>> [2] https://lkml.kernel.org/r/[e-mail]
>>> [3] https://lkml.kernel.org/r/[e-mail]
>>> [4] https://lkml.kernel.org/r/[e-mail]
>>> [5] https://lkml.kernel.org/r/[e-mail]
>>> [6] https://lkml.kernel.org/r/[e-mail]
>>> [7] https://lkml.kernel.org/r/[e-mail]
>>> [8] https://lkml.kernel.org/r/[e-mail]
>>> [9] https://lkml.kernel.org/r/[e-mail]
>>> [10] https://lore.kernel.org/all/[e-mail]/
>>> Liang Yang (4):
>>>    clk: meson: add one based divider support for sclk
>>>    clk: meson: add emmc sub clock phase delay driver
>>>    clk: meson: add DT documentation for emmc clock controller
>>>    clk: meson: add sub MMC clock controller driver
>>>
>>>   .../bindings/clock/amlogic,mmc-clkc.yaml      |  64 ++++
>>>   drivers/clk/meson/Kconfig                     |  18 ++
>>>   drivers/clk/meson/Makefile                    |   2 +
>>>   drivers/clk/meson/clk-phase-delay.c           |  69 ++++
>>>   drivers/clk/meson/clk-phase-delay.h           |  20 ++
>>>   drivers/clk/meson/mmc-clkc.c                  | 302 ++++++++++++++++++
>>>   drivers/clk/meson/sclk-div.c                  |  59 ++--
>>>   drivers/clk/meson/sclk-div.h                  |   3 +
>>>   include/dt-bindings/clock/amlogic,mmc-clkc.h  |  14 +
>>>   9 files changed, 529 insertions(+), 22 deletions(-)
>>>   create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml
>>>   create mode 100644 drivers/clk/meson/clk-phase-delay.c
>>>   create mode 100644 drivers/clk/meson/clk-phase-delay.h
>>>   create mode 100644 drivers/clk/meson/mmc-clkc.c
>>>   create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
>>>
>> .

Liang Yang Jan. 26, 2022, 9:42 a.m. UTC | #4

Hi Jerome,

On 2022/1/26 17:14, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
> 
> 
> On Wed 26 Jan 2022 at 17:08, Liang Yang <[e-mail]> wrote:
> 
>> Hi Neil,
>>
>> On 2022/1/25 22:54, Neil Armstrong wrote:
>>> [ EXTERNAL EMAIL ]
>>> Hi Liang,
>>> On 21/01/2022 08:45, Liang Yang wrote:
>>>> This driver will add a MMC clock controller driver support.
>>>> The original idea about adding a clock controller is during the
>>>> discussion in the NAND driver mainline effort[1].
>>>>
>>>> This driver is tested in the S400 board (AXG platform) with NAND driver.
>>> Thanks a lot for providing a fixed and updated version of this serie.
>>> After some chat with Jerome and Kevin, it seems the way the eMMC clock
>>> reuse
>>> for NAND was designed nearly 4 years doesn't look accurate anymore.
>>> Having a separate clk driver designed to replace the eMMC node when NAND
>>> is
>>> used on the board seems over engineered.
>>> Actually having the clock code you add in this serie _but_ directly in
>>> the NAND looks far better, and more coherent since having Linux runtime
>>> detection of eMMC vs NAND will never happen and even this serie required
>>> some DT modification from the bootloader.
>>> I'll let Jerome or Kevin add more details if they want, but I think you
>>> should resurrect
>>> the work you pushed in [1] & [2] but:
>>> - passing the eMMC clk registers as a third "reg" cell
>> Does it just need to define a 'reg' resource in NFC node and not 'syscon'
>> here?
> 
> Yes
> 
>>> - passing the same "clocks" phandle as the eMMC node
>>> - adding the eMMC clock code in the NAND driver directly
>>> I'm open to discussions if you consider the current approach is still
>>> superior.
>>
>> I don't have persuasive ideas, but really it shares the common clock
>> implementation for both NFC and EMMC. and we don't need to paste the
>> same code in NFC and EMMC.
> 
> You don't need to copy everything. If I understood correctly, all the
> Rx/Tx should not be needed. Yes, there is some duplication as it stands but
> it allows to avoid coupling the MMC and NAND driver. We can still think
> about optimizing things later on. Let's get something simply working
> first.
ok. i will do it. thank you.
> 
>>
>>> Thanks,
>>> Neil
>>> [1]
>>> https://lore.kernel.org/r/[e-mail]
>>> [2] https://lore.kernel.org/r/[e-mail]
>>>
>>>>
>>>> Changes since v9 [10]
>>>>    - use clk_parent_data instead of parent_names
>>>>
>>>> Changes since v8 [9]
>>>>    - use MESON_SCLK_ONE_BASED instead of CLK_DIVIDER_ONE_BASED
>>>>    - use struct_size to caculate onecell_data
>>>>    - add clk-phase-delay.h
>>>>    - define CLK_DELAY_STEP_PS_GX and CLK_DELAY_STEP_PS_AXG
>>>>
>>>> Changes since v7 [8]
>>>>    - move meson_clk_get_phase_delay_data() from header to driver
>>>>    - CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
>>>>    - remove onecell date and ID for internal MUX clk
>>>>    - use helper for functions for ONE_BASED in sclk-div
>>>>    - add ONE_BASED support for duty cycle
>>>>
>>>> Changes since v6 [7]:
>>>>    - add one based support for sclk divier
>>>>    - alloc sclk in probe for multiple instance
>>>>    - fix coding styles
>>>>
>>>> Changes since v5 [6]:
>>>>    - remove divider ops with .init and use sclk_div instead
>>>>    - drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
>>>>    - drop the useless type cast
>>>>
>>>> Changes since v4 [5]:
>>>>    - use struct parm in phase delay driver
>>>>    - remove 0 delay releted part in phase delay driver
>>>>    - don't rebuild the parent name once again
>>>>    - add divider ops with .init
>>>>
>>>> Changes since v3 [4]:
>>>>    - separate clk-phase-delay driver
>>>>    - replace clk_get_rate() with clk_hw_get_rate()
>>>>    - collect Rob's R-Y
>>>>    - drop 'meson-' prefix from compatible string
>>>>
>>>>    Changes since v2 [3]:
>>>>    - squash dt-binding clock-id patch
>>>>    - update license
>>>>    - fix alignment
>>>>    - construct a clk register helper() function
>>>>
>>>> Changes since v1 [2]:
>>>>    - implement phase clock
>>>>    - update compatible name
>>>>    - adjust file name
>>>>    - divider probe() into small functions, and re-use them
>>>>
>>>> [1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
>>>> [2] https://lkml.kernel.org/r/[e-mail]
>>>> [3] https://lkml.kernel.org/r/[e-mail]
>>>> [4] https://lkml.kernel.org/r/[e-mail]
>>>> [5] https://lkml.kernel.org/r/[e-mail]
>>>> [6] https://lkml.kernel.org/r/[e-mail]
>>>> [7] https://lkml.kernel.org/r/[e-mail]
>>>> [8] https://lkml.kernel.org/r/[e-mail]
>>>> [9] https://lkml.kernel.org/r/[e-mail]
>>>> [10] https://lore.kernel.org/all/[e-mail]/
>>>> Liang Yang (4):
>>>>     clk: meson: add one based divider support for sclk
>>>>     clk: meson: add emmc sub clock phase delay driver
>>>>     clk: meson: add DT documentation for emmc clock controller
>>>>     clk: meson: add sub MMC clock controller driver
>>>>
>>>>    .../bindings/clock/amlogic,mmc-clkc.yaml      |  64 ++++
>>>>    drivers/clk/meson/Kconfig                     |  18 ++
>>>>    drivers/clk/meson/Makefile                    |   2 +
>>>>    drivers/clk/meson/clk-phase-delay.c           |  69 ++++
>>>>    drivers/clk/meson/clk-phase-delay.h           |  20 ++
>>>>    drivers/clk/meson/mmc-clkc.c                  | 302 ++++++++++++++++++
>>>>    drivers/clk/meson/sclk-div.c                  |  59 ++--
>>>>    drivers/clk/meson/sclk-div.h                  |   3 +
>>>>    include/dt-bindings/clock/amlogic,mmc-clkc.h  |  14 +
>>>>    9 files changed, 529 insertions(+), 22 deletions(-)
>>>>    create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml
>>>>    create mode 100644 drivers/clk/meson/clk-phase-delay.c
>>>>    create mode 100644 drivers/clk/meson/clk-phase-delay.h
>>>>    create mode 100644 drivers/clk/meson/mmc-clkc.c
>>>>    create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
>>>>
>>> .
> 
> .