diff mbox series

[v4,15/42] acpi/pci: Consolidate host bridge setup

Message ID 20220124171705.10432-16-Jonathan.Cameron@huawei.com
State Superseded
Headers show
Series CXl 2.0 emulation Support | expand

Commit Message

Jonathan Cameron Jan. 24, 2022, 5:16 p.m. UTC 
From: Ben Widawsky <ben.widawsky@intel.com>

This cleanup will make it easier to add support for CXL to the mix.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 hw/i386/acpi-build.c | 38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

Comments

Alex Bennée Jan. 27, 2022, 2:10 p.m. UTC | #1 
Jonathan Cameron <Jonathan.Cameron@huawei.com> writes:

> From: Ben Widawsky <ben.widawsky@intel.com>
>
> This cleanup will make it easier to add support for CXL to the mix.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>  hw/i386/acpi-build.c | 38 +++++++++++++++++++++-----------------
>  1 file changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index ce823e8fcb..1d8ee988f2 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -1398,6 +1398,23 @@ static void build_smb0(Aml *table, I2CBus *smbus, int devnr, int func)
>      aml_append(table, scope);
>  }
>  
> +enum { PCI, PCIE };

Make this a typed enum and update the signatures to use it instead of
int to prevent confusion.

> +static void init_pci_acpi(Aml *dev, int uid, int type, bool native_pcie_hp)
> +{
> +    if (type == PCI) {
> +        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
> +        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
> +        aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
> +    } else {
> +        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
> +        aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
> +        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
> +        aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
> +        /* Expander bridges do not have ACPI PCI Hot-plug enabled */
> +        aml_append(dev, build_q35_osc_method(native_pcie_hp));
> +    }
> +}
> +
>  static void
>  build_dsdt(GArray *table_data, BIOSLinker *linker,
>             AcpiPmInfo *pm, AcpiMiscInfo *misc,
> @@ -1429,9 +1446,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>      if (misc->is_piix4) {
>          sb_scope = aml_scope("_SB");
>          dev = aml_device("PCI0");
> -        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
> -        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
> -        aml_append(dev, aml_name_decl("_UID", aml_int(pcmc->pci_root_uid)));
> +        init_pci_acpi(dev, pcmc->pci_root_uid, PCI, false);
>          aml_append(sb_scope, dev);
>          aml_append(dsdt, sb_scope);
>  
> @@ -1447,11 +1462,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>      } else {
>          sb_scope = aml_scope("_SB");
>          dev = aml_device("PCI0");
> -        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
> -        aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
> -        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
> -        aml_append(dev, aml_name_decl("_UID", aml_int(pcmc->pci_root_uid)));
> -        aml_append(dev, build_q35_osc_method(!pm->pcihp_bridge_en));
> +        init_pci_acpi(dev, pcmc->pci_root_uid, PCIE, !pm->pcihp_bridge_en);
>          aml_append(sb_scope, dev);
>          if (mcfg_valid) {
>              aml_append(sb_scope, build_q35_dram_controller(&mcfg));
> @@ -1562,17 +1573,10 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>  
>              scope = aml_scope("\\_SB");
>              dev = aml_device("PC%.02X", bus_num);
> -            aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
>              aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
> -            if (pci_bus_is_express(bus)) {
> -                aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
> -                aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
>  
> -                /* Expander bridges do not have ACPI PCI Hot-plug enabled */
> -                aml_append(dev, build_q35_osc_method(true));
> -            } else {
> -                aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
> -            }
> +            init_pci_acpi(dev, bus_num,
> +                          pci_bus_is_express(bus) ? PCIE : PCI, true);
>  
>              if (numa_node != NUMA_NODE_UNASSIGNED) {
>                  aml_append(dev, aml_name_decl("_PXM", aml_int(numa_node)));

Otherwise:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
diff mbox series

Patch

diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index ce823e8fcb..1d8ee988f2 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1398,6 +1398,23 @@  static void build_smb0(Aml *table, I2CBus *smbus, int devnr, int func)
     aml_append(table, scope);
 }
 
+enum { PCI, PCIE };
+static void init_pci_acpi(Aml *dev, int uid, int type, bool native_pcie_hp)
+{
+    if (type == PCI) {
+        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
+        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
+        aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
+    } else {
+        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
+        aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
+        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
+        aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
+        /* Expander bridges do not have ACPI PCI Hot-plug enabled */
+        aml_append(dev, build_q35_osc_method(native_pcie_hp));
+    }
+}
+
 static void
 build_dsdt(GArray *table_data, BIOSLinker *linker,
            AcpiPmInfo *pm, AcpiMiscInfo *misc,
@@ -1429,9 +1446,7 @@  build_dsdt(GArray *table_data, BIOSLinker *linker,
     if (misc->is_piix4) {
         sb_scope = aml_scope("_SB");
         dev = aml_device("PCI0");
-        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
-        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
-        aml_append(dev, aml_name_decl("_UID", aml_int(pcmc->pci_root_uid)));
+        init_pci_acpi(dev, pcmc->pci_root_uid, PCI, false);
         aml_append(sb_scope, dev);
         aml_append(dsdt, sb_scope);
 
@@ -1447,11 +1462,7 @@  build_dsdt(GArray *table_data, BIOSLinker *linker,
     } else {
         sb_scope = aml_scope("_SB");
         dev = aml_device("PCI0");
-        aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
-        aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
-        aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
-        aml_append(dev, aml_name_decl("_UID", aml_int(pcmc->pci_root_uid)));
-        aml_append(dev, build_q35_osc_method(!pm->pcihp_bridge_en));
+        init_pci_acpi(dev, pcmc->pci_root_uid, PCIE, !pm->pcihp_bridge_en);
         aml_append(sb_scope, dev);
         if (mcfg_valid) {
             aml_append(sb_scope, build_q35_dram_controller(&mcfg));
@@ -1562,17 +1573,10 @@  build_dsdt(GArray *table_data, BIOSLinker *linker,
 
             scope = aml_scope("\\_SB");
             dev = aml_device("PC%.02X", bus_num);
-            aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
             aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
-            if (pci_bus_is_express(bus)) {
-                aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
-                aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
 
-                /* Expander bridges do not have ACPI PCI Hot-plug enabled */
-                aml_append(dev, build_q35_osc_method(true));
-            } else {
-                aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
-            }
+            init_pci_acpi(dev, bus_num,
+                          pci_bus_is_express(bus) ? PCIE : PCI, true);
 
             if (numa_node != NUMA_NODE_UNASSIGNED) {
                 aml_append(dev, aml_name_decl("_PXM", aml_int(numa_node)));