| Message ID | 20220128173006.1713210-1-geert@linux-m68k.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | m68k: mm: Remove check for VM_IO to fix deferred I/O | expand |
Hi Geert, for hwregs_present(), the exception fixup will handle any access error (through send_fault_sig()), so this should continue to work. Why the special handling of VM_IO pages? Maybe hp300 had marked all IO register pages VM_IO to distinguish IO faults from VM faults... The only other area I can imagine this might have an impact is the Mac's pseudo-DMA - FInn might want to give this some testing. Cheers, Michael Am 29.01.2022 um 06:30 schrieb Geert Uytterhoeven: > When an application accesses a mapped frame buffer backed by deferred > I/O, it receives a segmentation fault. Fix this by removing the check > for VM_IO in do_page_fault(). > > Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> > --- > This check was never present in a fault handler on any other > architecture than m68k. > Some digging revealed that it was added in v2.1.106, but I couldn't find > an email with a patch adding it. That same kernel version extended the > use of the hwreg_present() helper to HP9000/300, so the check might have > been needed there, perhaps only during development? > The Atari kernel relies heavily on hwreg_present() (both the success and > failure cases), and these still work, at least on ARAnyM. > --- > arch/m68k/mm/fault.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c > index 1493cf5eac1e7a39..71aa9f6315dc8028 100644 > --- a/arch/m68k/mm/fault.c > +++ b/arch/m68k/mm/fault.c > @@ -93,8 +93,6 @@ int do_page_fault(struct pt_regs *regs, unsigned long address, > vma = find_vma(mm, address); > if (!vma) > goto map_err; > - if (vma->vm_flags & VM_IO) > - goto acc_err; > if (vma->vm_start <= address) > goto good_area; > if (!(vma->vm_flags & VM_GROWSDOWN)) >
On Sat, 29 Jan 2022, Michael Schmitz wrote: > Hi Geert, > > for hwregs_present(), the exception fixup will handle any access error > (through send_fault_sig()), so this should continue to work. > > Why the special handling of VM_IO pages? Maybe hp300 had marked all IO > register pages VM_IO to distinguish IO faults from VM faults... > > The only other area I can imagine this might have an impact is the Mac's > pseudo-DMA - FInn might want to give this some testing. > mac_scsi.c and mac_esp.c don't use ioremap(). They rely on head.S: mmu_map_eq #0x50000000,#0x03000000,%d3 Having said that, I will run some tests if you still think it necessary.
Hi Finn, Am 29.01.2022 um 12:55 schrieb Finn Thain: > On Sat, 29 Jan 2022, Michael Schmitz wrote: > >> Hi Geert, >> >> for hwregs_present(), the exception fixup will handle any access error >> (through send_fault_sig()), so this should continue to work. >> >> Why the special handling of VM_IO pages? Maybe hp300 had marked all IO >> register pages VM_IO to distinguish IO faults from VM faults... >> >> The only other area I can imagine this might have an impact is the Mac's >> pseudo-DMA - FInn might want to give this some testing. >> > > mac_scsi.c and mac_esp.c don't use ioremap(). They rely on head.S: > > mmu_map_eq #0x50000000,#0x03000000,%d3 > > Having said that, I will run some tests if you still think it necessary. No need for test then, thanks! Cheers, Michael
Hi Geert, testing this patch on my Falcon 030, I'm seeing a weird error checking and mounting the root filesystem (pata-falcon). The system appears to sit idle, never completing the journal recovery and mount. Still investigating that. Can't see how that would be caused by your patch, just saying I could not yet test it. Cheers, Michael Am 29.01.2022 um 06:30 schrieb Geert Uytterhoeven: > When an application accesses a mapped frame buffer backed by deferred > I/O, it receives a segmentation fault. Fix this by removing the check > for VM_IO in do_page_fault(). > > Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> > --- > This check was never present in a fault handler on any other > architecture than m68k. > Some digging revealed that it was added in v2.1.106, but I couldn't find > an email with a patch adding it. That same kernel version extended the > use of the hwreg_present() helper to HP9000/300, so the check might have > been needed there, perhaps only during development? > The Atari kernel relies heavily on hwreg_present() (both the success and > failure cases), and these still work, at least on ARAnyM. > --- > arch/m68k/mm/fault.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c > index 1493cf5eac1e7a39..71aa9f6315dc8028 100644 > --- a/arch/m68k/mm/fault.c > +++ b/arch/m68k/mm/fault.c > @@ -93,8 +93,6 @@ int do_page_fault(struct pt_regs *regs, unsigned long address, > vma = find_vma(mm, address); > if (!vma) > goto map_err; > - if (vma->vm_flags & VM_IO) > - goto acc_err; > if (vma->vm_start <= address) > goto good_area; > if (!(vma->vm_flags & VM_GROWSDOWN)) >
Hi Geert, Am 30.01.2022 um 13:32 schrieb Michael Schmitz: > Hi Geert, > > testing this patch on my Falcon 030, I'm seeing a weird error checking > and mounting the root filesystem (pata-falcon). The system appears to > sit idle, never completing the journal recovery and mount. Still > investigating that. Belay that - not related to your patch, must be some other regression since v5.16 that I'm seeing there. Just ignore the noise ... Cheers, Michael > Can't see how that would be caused by your patch, just saying I could > not yet test it. > > Cheers, > > Michael > > > Am 29.01.2022 um 06:30 schrieb Geert Uytterhoeven: >> When an application accesses a mapped frame buffer backed by deferred >> I/O, it receives a segmentation fault. Fix this by removing the check >> for VM_IO in do_page_fault(). >> >> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> >> --- >> This check was never present in a fault handler on any other >> architecture than m68k. >> Some digging revealed that it was added in v2.1.106, but I couldn't find >> an email with a patch adding it. That same kernel version extended the >> use of the hwreg_present() helper to HP9000/300, so the check might have >> been needed there, perhaps only during development? >> The Atari kernel relies heavily on hwreg_present() (both the success and >> failure cases), and these still work, at least on ARAnyM. >> --- >> arch/m68k/mm/fault.c | 2 -- >> 1 file changed, 2 deletions(-) >> >> diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c >> index 1493cf5eac1e7a39..71aa9f6315dc8028 100644 >> --- a/arch/m68k/mm/fault.c >> +++ b/arch/m68k/mm/fault.c >> @@ -93,8 +93,6 @@ int do_page_fault(struct pt_regs *regs, unsigned >> long address, >> vma = find_vma(mm, address); >> if (!vma) >> goto map_err; >> - if (vma->vm_flags & VM_IO) >> - goto acc_err; >> if (vma->vm_start <= address) >> goto good_area; >> if (!(vma->vm_flags & VM_GROWSDOWN)) >>
Hi Geert, Am 29.01.2022 um 06:30 schrieb Geert Uytterhoeven: > When an application accesses a mapped frame buffer backed by deferred > I/O, it receives a segmentation fault. Fix this by removing the check > for VM_IO in do_page_fault(). > > Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Works fine on my Falcon030 when applied to v5.16. Tested-by: Michael Schmitz <schmitzmic@gmail.com> > --- > This check was never present in a fault handler on any other > architecture than m68k. > Some digging revealed that it was added in v2.1.106, but I couldn't find > an email with a patch adding it. That same kernel version extended the > use of the hwreg_present() helper to HP9000/300, so the check might have > been needed there, perhaps only during development? > The Atari kernel relies heavily on hwreg_present() (both the success and > failure cases), and these still work, at least on ARAnyM. > --- > arch/m68k/mm/fault.c | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c > index 1493cf5eac1e7a39..71aa9f6315dc8028 100644 > --- a/arch/m68k/mm/fault.c > +++ b/arch/m68k/mm/fault.c > @@ -93,8 +93,6 @@ int do_page_fault(struct pt_regs *regs, unsigned long address, > vma = find_vma(mm, address); > if (!vma) > goto map_err; > - if (vma->vm_flags & VM_IO) > - goto acc_err; > if (vma->vm_start <= address) > goto good_area; > if (!(vma->vm_flags & VM_GROWSDOWN)) >
On Mon, Jan 31, 2022 at 3:22 AM Michael Schmitz <schmitzmic@gmail.com> wrote: > Am 29.01.2022 um 06:30 schrieb Geert Uytterhoeven: > > When an application accesses a mapped frame buffer backed by deferred > > I/O, it receives a segmentation fault. Fix this by removing the check > > for VM_IO in do_page_fault(). > > > > Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> > > Works fine on my Falcon030 when applied to v5.16. > > Tested-by: Michael Schmitz <schmitzmic@gmail.com> Thanks, queued in the m68k for-v5.18 branch. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c index 1493cf5eac1e7a39..71aa9f6315dc8028 100644 --- a/arch/m68k/mm/fault.c +++ b/arch/m68k/mm/fault.c @@ -93,8 +93,6 @@ int do_page_fault(struct pt_regs *regs, unsigned long address, vma = find_vma(mm, address); if (!vma) goto map_err; - if (vma->vm_flags & VM_IO) - goto acc_err; if (vma->vm_start <= address) goto good_area; if (!(vma->vm_flags & VM_GROWSDOWN))
When an application accesses a mapped frame buffer backed by deferred I/O, it receives a segmentation fault. Fix this by removing the check for VM_IO in do_page_fault(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- This check was never present in a fault handler on any other architecture than m68k. Some digging revealed that it was added in v2.1.106, but I couldn't find an email with a patch adding it. That same kernel version extended the use of the hwreg_present() helper to HP9000/300, so the check might have been needed there, perhaps only during development? The Atari kernel relies heavily on hwreg_present() (both the success and failure cases), and these still work, at least on ARAnyM. --- arch/m68k/mm/fault.c | 2 -- 1 file changed, 2 deletions(-)