| Message ID | 164324151672.3935633.11277011056733051668.stgit@dwillia2-desk3.amr.corp.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Wed, 26 Jan 2022 15:59:07 -0800 Dan Williams <dan.j.williams@intel.com> wrote: > In preparation for switch port enumeration while also preserving the > potential for multi-domain / multi-root CXL topologies. Introduce a > 'struct device' generic mechanism for retrieving a root CXL port, if one > is registered. Note that the only know multi-domain CXL configurations > are running the cxl_test unit test on a system that also publishes an > ACPI0017 device. > > With this in hand the nvdimm-bridge lookup can be with > device_find_child() instead of bus_find_device() + custom mocked lookup > infrastructure in cxl_test. > > The mechanism looks for a 2nd level port since the root level topology > is platform-firmware specific and the 2nd level down follows standard > PCIe topology expectations. The cxl_acpi 2nd level is associated with a > PCIe Root Port. > > Reported-by: Ben Widawsky <ben.widawsky@intel.com> > Signed-off-by: Dan Williams <dan.j.williams@intel.com> A question inline. Thanks, Jonathan > --- > Changes since v4: > - reset @iter each loop otherwise only the first dport can be scanned. > > drivers/cxl/core/pmem.c | 14 ++++++++--- > drivers/cxl/core/port.c | 50 +++++++++++++++++++++++++++++++++++++++++ > drivers/cxl/cxl.h | 1 + > tools/testing/cxl/Kbuild | 2 -- > tools/testing/cxl/mock_pmem.c | 24 -------------------- > 5 files changed, 61 insertions(+), 30 deletions(-) > delete mode 100644 tools/testing/cxl/mock_pmem.c > > diff --git a/drivers/cxl/core/pmem.c b/drivers/cxl/core/pmem.c > index 40b3f5030496..8de240c4d96b 100644 > --- a/drivers/cxl/core/pmem.c > +++ b/drivers/cxl/core/pmem.c > @@ -57,24 +57,30 @@ bool is_cxl_nvdimm_bridge(struct device *dev) > } > EXPORT_SYMBOL_NS_GPL(is_cxl_nvdimm_bridge, CXL); > > -__mock int match_nvdimm_bridge(struct device *dev, const void *data) > +static int match_nvdimm_bridge(struct device *dev, void *data) > { > return is_cxl_nvdimm_bridge(dev); > } > > struct cxl_nvdimm_bridge *cxl_find_nvdimm_bridge(struct cxl_nvdimm *cxl_nvd) > { > + struct cxl_port *port = find_cxl_root(&cxl_nvd->dev); > struct device *dev; > > - dev = bus_find_device(&cxl_bus_type, NULL, cxl_nvd, match_nvdimm_bridge); > + if (!port) > + return NULL; > + > + dev = device_find_child(&port->dev, NULL, match_nvdimm_bridge); > + put_device(&port->dev); > + > if (!dev) > return NULL; > + > return to_cxl_nvdimm_bridge(dev); > } > EXPORT_SYMBOL_NS_GPL(cxl_find_nvdimm_bridge, CXL); > > -static struct cxl_nvdimm_bridge * > -cxl_nvdimm_bridge_alloc(struct cxl_port *port) > +static struct cxl_nvdimm_bridge *cxl_nvdimm_bridge_alloc(struct cxl_port *port) > { > struct cxl_nvdimm_bridge *cxl_nvb; > struct device *dev; > diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c > index 4c921c49f967..6447f12ef71d 100644 > --- a/drivers/cxl/core/port.c > +++ b/drivers/cxl/core/port.c > @@ -457,6 +457,56 @@ int devm_cxl_register_pci_bus(struct device *host, struct device *uport, > } > EXPORT_SYMBOL_NS_GPL(devm_cxl_register_pci_bus, CXL); > > +/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */ > +static int match_cxl_root_child(struct device *dev, const void *match) > +{ > + const struct device *iter = NULL; > + struct cxl_port *port, *parent; > + struct cxl_dport *dport; > + > + if (!is_cxl_port(dev)) > + return 0; > + > + port = to_cxl_port(dev); > + if (is_cxl_root(port)) > + return 0; > + > + parent = to_cxl_port(port->dev.parent); > + if (!is_cxl_root(parent)) > + return 0; > + > + cxl_device_lock(&port->dev); > + list_for_each_entry(dport, &port->dports, list) { > + iter = match; This confuses me. In the call below to bus_find_device() data == NULL, which ends up as match here. So how does that ever find a match? > + while (iter) { > + if (iter == dport->dport) > + goto out; > + iter = iter->parent; > + } > + } > +out: > + cxl_device_unlock(&port->dev); > + > + return !!iter; return iter; should be sufficient as docs just say non zero for a match in bus_find_device() match functions. > +} > + > +struct cxl_port *find_cxl_root(struct device *dev) > +{ > + struct device *port_dev; > + struct cxl_port *root; > + > + port_dev = > + bus_find_device(&cxl_bus_type, NULL, dev, match_cxl_root_child); Line breaking is rather ugly to my eye. Perhaps break parameter list up instead? > + if (!port_dev) > + return NULL; > + > + root = to_cxl_port(port_dev->parent); > + get_device(&root->dev); > + put_device(port_dev); > + return root; > +} > +EXPORT_SYMBOL_NS_GPL(find_cxl_root, CXL); > + > static struct cxl_dport *find_dport(struct cxl_port *port, int id) > { > struct cxl_dport *dport; > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > index 4e8d504546c5..7523e4d60953 100644 > --- a/drivers/cxl/cxl.h > +++ b/drivers/cxl/cxl.h > @@ -298,6 +298,7 @@ struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport, > > int cxl_add_dport(struct cxl_port *port, struct device *dport, int port_id, > resource_size_t component_reg_phys); > +struct cxl_port *find_cxl_root(struct device *dev); > > struct cxl_decoder *to_cxl_decoder(struct device *dev); > bool is_root_decoder(struct device *dev);
On Mon, Jan 31, 2022 at 8:20 AM Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote: > > On Wed, 26 Jan 2022 15:59:07 -0800 > Dan Williams <dan.j.williams@intel.com> wrote: > > > In preparation for switch port enumeration while also preserving the > > potential for multi-domain / multi-root CXL topologies. Introduce a > > 'struct device' generic mechanism for retrieving a root CXL port, if one > > is registered. Note that the only know multi-domain CXL configurations > > are running the cxl_test unit test on a system that also publishes an > > ACPI0017 device. > > > > With this in hand the nvdimm-bridge lookup can be with > > device_find_child() instead of bus_find_device() + custom mocked lookup > > infrastructure in cxl_test. > > > > The mechanism looks for a 2nd level port since the root level topology > > is platform-firmware specific and the 2nd level down follows standard > > PCIe topology expectations. The cxl_acpi 2nd level is associated with a > > PCIe Root Port. > > > > Reported-by: Ben Widawsky <ben.widawsky@intel.com> > > Signed-off-by: Dan Williams <dan.j.williams@intel.com> > A question inline. > > Thanks, > > Jonathan > > > --- > > Changes since v4: > > - reset @iter each loop otherwise only the first dport can be scanned. > > > > drivers/cxl/core/pmem.c | 14 ++++++++--- > > drivers/cxl/core/port.c | 50 +++++++++++++++++++++++++++++++++++++++++ > > drivers/cxl/cxl.h | 1 + > > tools/testing/cxl/Kbuild | 2 -- > > tools/testing/cxl/mock_pmem.c | 24 -------------------- > > 5 files changed, 61 insertions(+), 30 deletions(-) > > delete mode 100644 tools/testing/cxl/mock_pmem.c > > > > diff --git a/drivers/cxl/core/pmem.c b/drivers/cxl/core/pmem.c > > index 40b3f5030496..8de240c4d96b 100644 > > --- a/drivers/cxl/core/pmem.c > > +++ b/drivers/cxl/core/pmem.c > > @@ -57,24 +57,30 @@ bool is_cxl_nvdimm_bridge(struct device *dev) > > } > > EXPORT_SYMBOL_NS_GPL(is_cxl_nvdimm_bridge, CXL); > > > > -__mock int match_nvdimm_bridge(struct device *dev, const void *data) > > +static int match_nvdimm_bridge(struct device *dev, void *data) > > { > > return is_cxl_nvdimm_bridge(dev); > > } > > > > struct cxl_nvdimm_bridge *cxl_find_nvdimm_bridge(struct cxl_nvdimm *cxl_nvd) > > { > > + struct cxl_port *port = find_cxl_root(&cxl_nvd->dev); > > struct device *dev; > > > > - dev = bus_find_device(&cxl_bus_type, NULL, cxl_nvd, match_nvdimm_bridge); > > + if (!port) > > + return NULL; > > + > > + dev = device_find_child(&port->dev, NULL, match_nvdimm_bridge); > > + put_device(&port->dev); > > + > > if (!dev) > > return NULL; > > + > > return to_cxl_nvdimm_bridge(dev); > > } > > EXPORT_SYMBOL_NS_GPL(cxl_find_nvdimm_bridge, CXL); > > > > -static struct cxl_nvdimm_bridge * > > -cxl_nvdimm_bridge_alloc(struct cxl_port *port) > > +static struct cxl_nvdimm_bridge *cxl_nvdimm_bridge_alloc(struct cxl_port *port) > > { > > struct cxl_nvdimm_bridge *cxl_nvb; > > struct device *dev; > > diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c > > index 4c921c49f967..6447f12ef71d 100644 > > --- a/drivers/cxl/core/port.c > > +++ b/drivers/cxl/core/port.c > > @@ -457,6 +457,56 @@ int devm_cxl_register_pci_bus(struct device *host, struct device *uport, > > } > > EXPORT_SYMBOL_NS_GPL(devm_cxl_register_pci_bus, CXL); > > > > +/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */ > > +static int match_cxl_root_child(struct device *dev, const void *match) > > +{ > > + const struct device *iter = NULL; > > + struct cxl_port *port, *parent; > > + struct cxl_dport *dport; > > + > > + if (!is_cxl_port(dev)) > > + return 0; > > + > > + port = to_cxl_port(dev); > > + if (is_cxl_root(port)) > > + return 0; > > + > > + parent = to_cxl_port(port->dev.parent); > > + if (!is_cxl_root(parent)) > > + return 0; > > + > > + cxl_device_lock(&port->dev); > > + list_for_each_entry(dport, &port->dports, list) { > > + iter = match; > > This confuses me. In the call below to bus_find_device() > data == NULL, which ends up as match here. I think you misread, @start is NULL @data becomes @match as the starting point for the search. > > So how does that ever find a match? > > > + while (iter) { > > + if (iter == dport->dport) > > + goto out; > > + iter = iter->parent; > > + } > > + } > > +out: > > + cxl_device_unlock(&port->dev); > > + > > + return !!iter; > > return iter; should be sufficient as docs just say non zero for a match > in bus_find_device() match functions. drivers/cxl/core/port.c:488:16: error: returning ‘const struct device *’ from a function with return type ‘int’ makes integer from pointer without a cast [-Werror=int-conversion] > > > +} > > + > > +struct cxl_port *find_cxl_root(struct device *dev) > > +{ > > + struct device *port_dev; > > + struct cxl_port *root; > > + > > + port_dev = > > + bus_find_device(&cxl_bus_type, NULL, dev, match_cxl_root_child); > > Line breaking is rather ugly to my eye. Perhaps break > parameter list up instead? This is what clang-format picked, but yes it's a tag ugly. I'll go ahead and s/match_cxl_root_child/match_root_child/ since there are no public symbol namespace issues with this static helper.
On Mon, 31 Jan 2022 16:22:35 -0800 Dan Williams <dan.j.williams@intel.com> wrote: > On Mon, Jan 31, 2022 at 8:20 AM Jonathan Cameron > <Jonathan.Cameron@huawei.com> wrote: > > > > On Wed, 26 Jan 2022 15:59:07 -0800 > > Dan Williams <dan.j.williams@intel.com> wrote: > > > > > In preparation for switch port enumeration while also preserving the > > > potential for multi-domain / multi-root CXL topologies. Introduce a > > > 'struct device' generic mechanism for retrieving a root CXL port, if one > > > is registered. Note that the only know multi-domain CXL configurations > > > are running the cxl_test unit test on a system that also publishes an > > > ACPI0017 device. > > > > > > With this in hand the nvdimm-bridge lookup can be with > > > device_find_child() instead of bus_find_device() + custom mocked lookup > > > infrastructure in cxl_test. > > > > > > The mechanism looks for a 2nd level port since the root level topology > > > is platform-firmware specific and the 2nd level down follows standard > > > PCIe topology expectations. The cxl_acpi 2nd level is associated with a > > > PCIe Root Port. > > > > > > Reported-by: Ben Widawsky <ben.widawsky@intel.com> > > > Signed-off-by: Dan Williams <dan.j.williams@intel.com> > > A question inline. > > > > Thanks, > > > > Jonathan > > > > > --- > > > Changes since v4: > > > - reset @iter each loop otherwise only the first dport can be scanned. > > > > > > drivers/cxl/core/pmem.c | 14 ++++++++--- > > > drivers/cxl/core/port.c | 50 +++++++++++++++++++++++++++++++++++++++++ > > > drivers/cxl/cxl.h | 1 + > > > tools/testing/cxl/Kbuild | 2 -- > > > tools/testing/cxl/mock_pmem.c | 24 -------------------- > > > 5 files changed, 61 insertions(+), 30 deletions(-) > > > delete mode 100644 tools/testing/cxl/mock_pmem.c > > > > > > diff --git a/drivers/cxl/core/pmem.c b/drivers/cxl/core/pmem.c > > > index 40b3f5030496..8de240c4d96b 100644 > > > --- a/drivers/cxl/core/pmem.c > > > +++ b/drivers/cxl/core/pmem.c > > > @@ -57,24 +57,30 @@ bool is_cxl_nvdimm_bridge(struct device *dev) > > > } > > > EXPORT_SYMBOL_NS_GPL(is_cxl_nvdimm_bridge, CXL); > > > > > > -__mock int match_nvdimm_bridge(struct device *dev, const void *data) > > > +static int match_nvdimm_bridge(struct device *dev, void *data) > > > { > > > return is_cxl_nvdimm_bridge(dev); > > > } > > > > > > struct cxl_nvdimm_bridge *cxl_find_nvdimm_bridge(struct cxl_nvdimm *cxl_nvd) > > > { > > > + struct cxl_port *port = find_cxl_root(&cxl_nvd->dev); > > > struct device *dev; > > > > > > - dev = bus_find_device(&cxl_bus_type, NULL, cxl_nvd, match_nvdimm_bridge); > > > + if (!port) > > > + return NULL; > > > + > > > + dev = device_find_child(&port->dev, NULL, match_nvdimm_bridge); > > > + put_device(&port->dev); > > > + > > > if (!dev) > > > return NULL; > > > + > > > return to_cxl_nvdimm_bridge(dev); > > > } > > > EXPORT_SYMBOL_NS_GPL(cxl_find_nvdimm_bridge, CXL); > > > > > > -static struct cxl_nvdimm_bridge * > > > -cxl_nvdimm_bridge_alloc(struct cxl_port *port) > > > +static struct cxl_nvdimm_bridge *cxl_nvdimm_bridge_alloc(struct cxl_port *port) > > > { > > > struct cxl_nvdimm_bridge *cxl_nvb; > > > struct device *dev; > > > diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c > > > index 4c921c49f967..6447f12ef71d 100644 > > > --- a/drivers/cxl/core/port.c > > > +++ b/drivers/cxl/core/port.c > > > @@ -457,6 +457,56 @@ int devm_cxl_register_pci_bus(struct device *host, struct device *uport, > > > } > > > EXPORT_SYMBOL_NS_GPL(devm_cxl_register_pci_bus, CXL); > > > > > > +/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */ > > > +static int match_cxl_root_child(struct device *dev, const void *match) > > > +{ > > > + const struct device *iter = NULL; > > > + struct cxl_port *port, *parent; > > > + struct cxl_dport *dport; > > > + > > > + if (!is_cxl_port(dev)) > > > + return 0; > > > + > > > + port = to_cxl_port(dev); > > > + if (is_cxl_root(port)) > > > + return 0; > > > + > > > + parent = to_cxl_port(port->dev.parent); > > > + if (!is_cxl_root(parent)) > > > + return 0; > > > + > > > + cxl_device_lock(&port->dev); > > > + list_for_each_entry(dport, &port->dports, list) { > > > + iter = match; > > > > This confuses me. In the call below to bus_find_device() > > data == NULL, which ends up as match here. > > I think you misread, @start is NULL @data becomes @match as the > starting point for the search. oops. I read the wrong parameter order as you identified. > > > > > So how does that ever find a match? > > > > > + while (iter) { > > > + if (iter == dport->dport) > > > + goto out; > > > + iter = iter->parent; > > > + } > > > + } > > > +out: > > > + cxl_device_unlock(&port->dev); > > > + > > > + return !!iter; > > > > return iter; should be sufficient as docs just say non zero for a match > > in bus_find_device() match functions. > > drivers/cxl/core/port.c:488:16: error: returning ‘const struct device > *’ from a function with return type ‘int’ makes integer from pointer > without a cast [-Werror=int-conversion] Ah. Good point. Jonathan
diff --git a/drivers/cxl/core/pmem.c b/drivers/cxl/core/pmem.c index 40b3f5030496..8de240c4d96b 100644 --- a/drivers/cxl/core/pmem.c +++ b/drivers/cxl/core/pmem.c @@ -57,24 +57,30 @@ bool is_cxl_nvdimm_bridge(struct device *dev) } EXPORT_SYMBOL_NS_GPL(is_cxl_nvdimm_bridge, CXL); -__mock int match_nvdimm_bridge(struct device *dev, const void *data) +static int match_nvdimm_bridge(struct device *dev, void *data) { return is_cxl_nvdimm_bridge(dev); } struct cxl_nvdimm_bridge *cxl_find_nvdimm_bridge(struct cxl_nvdimm *cxl_nvd) { + struct cxl_port *port = find_cxl_root(&cxl_nvd->dev); struct device *dev; - dev = bus_find_device(&cxl_bus_type, NULL, cxl_nvd, match_nvdimm_bridge); + if (!port) + return NULL; + + dev = device_find_child(&port->dev, NULL, match_nvdimm_bridge); + put_device(&port->dev); + if (!dev) return NULL; + return to_cxl_nvdimm_bridge(dev); } EXPORT_SYMBOL_NS_GPL(cxl_find_nvdimm_bridge, CXL); -static struct cxl_nvdimm_bridge * -cxl_nvdimm_bridge_alloc(struct cxl_port *port) +static struct cxl_nvdimm_bridge *cxl_nvdimm_bridge_alloc(struct cxl_port *port) { struct cxl_nvdimm_bridge *cxl_nvb; struct device *dev; diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 4c921c49f967..6447f12ef71d 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -457,6 +457,56 @@ int devm_cxl_register_pci_bus(struct device *host, struct device *uport, } EXPORT_SYMBOL_NS_GPL(devm_cxl_register_pci_bus, CXL); +/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */ +static int match_cxl_root_child(struct device *dev, const void *match) +{ + const struct device *iter = NULL; + struct cxl_port *port, *parent; + struct cxl_dport *dport; + + if (!is_cxl_port(dev)) + return 0; + + port = to_cxl_port(dev); + if (is_cxl_root(port)) + return 0; + + parent = to_cxl_port(port->dev.parent); + if (!is_cxl_root(parent)) + return 0; + + cxl_device_lock(&port->dev); + list_for_each_entry(dport, &port->dports, list) { + iter = match; + while (iter) { + if (iter == dport->dport) + goto out; + iter = iter->parent; + } + } +out: + cxl_device_unlock(&port->dev); + + return !!iter; +} + +struct cxl_port *find_cxl_root(struct device *dev) +{ + struct device *port_dev; + struct cxl_port *root; + + port_dev = + bus_find_device(&cxl_bus_type, NULL, dev, match_cxl_root_child); + if (!port_dev) + return NULL; + + root = to_cxl_port(port_dev->parent); + get_device(&root->dev); + put_device(port_dev); + return root; +} +EXPORT_SYMBOL_NS_GPL(find_cxl_root, CXL); + static struct cxl_dport *find_dport(struct cxl_port *port, int id) { struct cxl_dport *dport; diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 4e8d504546c5..7523e4d60953 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -298,6 +298,7 @@ struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport, int cxl_add_dport(struct cxl_port *port, struct device *dport, int port_id, resource_size_t component_reg_phys); +struct cxl_port *find_cxl_root(struct device *dev); struct cxl_decoder *to_cxl_decoder(struct device *dev); bool is_root_decoder(struct device *dev); diff --git a/tools/testing/cxl/Kbuild b/tools/testing/cxl/Kbuild index 3299fb0977b2..ddaee8a2c418 100644 --- a/tools/testing/cxl/Kbuild +++ b/tools/testing/cxl/Kbuild @@ -32,6 +32,4 @@ cxl_core-y += $(CXL_CORE_SRC)/memdev.o cxl_core-y += $(CXL_CORE_SRC)/mbox.o cxl_core-y += config_check.o -cxl_core-y += mock_pmem.o - obj-m += test/ diff --git a/tools/testing/cxl/mock_pmem.c b/tools/testing/cxl/mock_pmem.c deleted file mode 100644 index f7315e6f52c0..000000000000 --- a/tools/testing/cxl/mock_pmem.c +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* Copyright(c) 2021 Intel Corporation. All rights reserved. */ -#include <cxl.h> -#include "test/mock.h" -#include <core/core.h> - -int match_nvdimm_bridge(struct device *dev, const void *data) -{ - int index, rc = 0; - struct cxl_mock_ops *ops = get_cxl_mock_ops(&index); - const struct cxl_nvdimm *cxl_nvd = data; - - if (ops) { - if (dev->type == &cxl_nvdimm_bridge_type && - (ops->is_mock_dev(dev->parent->parent) == - ops->is_mock_dev(cxl_nvd->dev.parent->parent))) - rc = 1; - } else - rc = dev->type == &cxl_nvdimm_bridge_type; - - put_cxl_mock_ops(index); - - return rc; -}
In preparation for switch port enumeration while also preserving the potential for multi-domain / multi-root CXL topologies. Introduce a 'struct device' generic mechanism for retrieving a root CXL port, if one is registered. Note that the only know multi-domain CXL configurations are running the cxl_test unit test on a system that also publishes an ACPI0017 device. With this in hand the nvdimm-bridge lookup can be with device_find_child() instead of bus_find_device() + custom mocked lookup infrastructure in cxl_test. The mechanism looks for a 2nd level port since the root level topology is platform-firmware specific and the 2nd level down follows standard PCIe topology expectations. The cxl_acpi 2nd level is associated with a PCIe Root Port. Reported-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- Changes since v4: - reset @iter each loop otherwise only the first dport can be scanned. drivers/cxl/core/pmem.c | 14 ++++++++--- drivers/cxl/core/port.c | 50 +++++++++++++++++++++++++++++++++++++++++ drivers/cxl/cxl.h | 1 + tools/testing/cxl/Kbuild | 2 -- tools/testing/cxl/mock_pmem.c | 24 -------------------- 5 files changed, 61 insertions(+), 30 deletions(-) delete mode 100644 tools/testing/cxl/mock_pmem.c