| Message ID | 1637580555-1079-1-git-send-email-quic_sbillaka@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/4] arm64: dts: qcom: sc7280: add display dt nodes | expand |
On Mon 22 Nov 05:29 CST 2021, Sankeerth Billakanti wrote: > From: Kuogee Hsieh <khsieh@codeaurora.org> > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > Reviewed-by: Stephen Boyd <swboyd@chromium.org> > Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Can you please update this to make From: and Signed-off-by: match. Also I don't know how you prepared this patch series, because this says patch 4/4, but it's not part of the same series as the other patches. I did pick up the first 3 patches, but then noticed that you are back at using the original labels, so please see below and send all 4 patches in a proper series. > --- > > Changes in v4: > - Add the patch to display DT change series (Bjorn Andersson) > - Remove the trailing whitespaces > > arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 +++++++++++++++++++++++++++++++++++- > 1 file changed, 88 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 5ad500e..0b2ffd5 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -2693,8 +2693,8 @@ > <&gcc GCC_DISP_GPLL0_CLK_SRC>, > <&dsi_phy 0>, > <&dsi_phy 1>, > - <0>, > - <0>, > + <&dp_phy 0>, > + <&dp_phy 1>, > <&edp_phy 0>, > <&edp_phy 1>; > clock-names = "bi_tcxo", > @@ -2791,6 +2791,13 @@ > remote-endpoint = <&edp_in>; > }; > }; > + > + port@2 { > + reg = <2>; > + dpu_intf0_out: endpoint { > + remote-endpoint = <&dp_in>; > + }; > + }; > }; > > mdp_opp_table: opp-table { > @@ -3002,6 +3009,79 @@ > > status = "disabled"; > }; > + > + msm_dp: displayport-controller@ae90000 { As requested previously, can you please label this mdss_dp, to make it sort nicely in the dts? Thanks, Bjorn > + compatible = "qcom,sc7280-dp"; > + > + reg = <0 0x0ae90000 0 0x1400>; > + > + interrupt-parent = <&mdss>; > + interrupts = <12>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, > + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, > + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; > + clock-names = "core_iface", > + "core_aux", > + "ctrl_link", > + "ctrl_link_iface", > + "stream_pixel"; > + #clock-cells = <1>; > + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; > + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; > + phys = <&dp_phy>; > + phy-names = "dp"; > + > + operating-points-v2 = <&dp_opp_table>; > + power-domains = <&rpmhpd SC7280_CX>; > + > + #sound-dai-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + dp_in: endpoint { > + remote-endpoint = <&dpu_intf0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dp_out: endpoint { }; > + }; > + }; > + > + dp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > }; > > pdc: interrupt-controller@b220000 { > @@ -3104,6 +3184,12 @@ > bias-pull-up; > }; > > + dp_hot_plug_det: dp-hot-plug-det { > + pins = "gpio47"; > + function = "dp_hot"; > + bias-disable; > + }; > + > qspi_clk: qspi-clk { > pins = "gpio14"; > function = "qspi_clk"; > -- > 2.7.4 >
On Mon, 22 Nov 2021 16:59:15 +0530, Sankeerth Billakanti wrote: > From: Kuogee Hsieh <khsieh@codeaurora.org> > > Applied, thanks! [4/4] arm64: dts: qcom: sc7280: Add Display Port node commit: fc6b1225d20de0298a7b0e52eb3843d71e1992e8 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 5ad500e..0b2ffd5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2693,8 +2693,8 @@ <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, <&dsi_phy 1>, - <0>, - <0>, + <&dp_phy 0>, + <&dp_phy 1>, <&edp_phy 0>, <&edp_phy 1>; clock-names = "bi_tcxo", @@ -2791,6 +2791,13 @@ remote-endpoint = <&edp_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -3002,6 +3009,79 @@ status = "disabled"; }; + + msm_dp: displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0 0x0ae90000 0 0x1400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + #clock-cells = <1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; }; pdc: interrupt-controller@b220000 { @@ -3104,6 +3184,12 @@ bias-pull-up; }; + dp_hot_plug_det: dp-hot-plug-det { + pins = "gpio47"; + function = "dp_hot"; + bias-disable; + }; + qspi_clk: qspi-clk { pins = "gpio14"; function = "qspi_clk";