diff mbox series

[v4,6/8] i2c: i801: convert to use common P2SB accessor

Message ID 20220131151346.45792-7-andriy.shevchenko@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series platform/x86: introduce p2sb_bar() helper | expand

Commit Message

Andy Shevchenko Jan. 31, 2022, 3:13 p.m. UTC 
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.

Replace custom code by p2sb_bar() call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/i2c/busses/Kconfig        |  1 +
 drivers/i2c/busses/i2c-i801.c     | 39 +++++++------------------------
 drivers/platform/x86/intel/p2sb.c |  6 +++++
 3 files changed, 16 insertions(+), 30 deletions(-)

Comments

Jean Delvare Feb. 3, 2022, 2:14 p.m. UTC | #1 
Hi Andy,

On Mon, 31 Jan 2022 17:13:44 +0200, Andy Shevchenko wrote:
> Since we have a common P2SB accessor in tree we may use it instead of
> open coded variants.
> 
> Replace custom code by p2sb_bar() call.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Acked-by: Hans de Goede <hdegoede@redhat.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  drivers/i2c/busses/Kconfig        |  1 +
>  drivers/i2c/busses/i2c-i801.c     | 39 +++++++------------------------
>  drivers/platform/x86/intel/p2sb.c |  6 +++++
>  3 files changed, 16 insertions(+), 30 deletions(-)
> (...)

Reviewed-by: Jean Delvare <jdelvare@suse.de>

And thank you for taking the time to write this neat P2SB API and to
convert all the code that was doing the same so far.
Wolfram Sang Feb. 7, 2022, 12:11 p.m. UTC | #2 
On Mon, Jan 31, 2022 at 05:13:44PM +0200, Andy Shevchenko wrote:
> Since we have a common P2SB accessor in tree we may use it instead of
> open coded variants.
> 
> Replace custom code by p2sb_bar() call.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Acked-by: Hans de Goede <hdegoede@redhat.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Acked-by: Wolfram Sang <wsa@kernel.org>
diff mbox series

Patch

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 42da31c1ab70..286f3b14712b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -101,6 +101,7 @@  config I2C_HIX5HD2
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
+	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
 	help
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 7428cc6af5cc..950a9b444adf 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -110,6 +110,7 @@ 
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 
@@ -139,7 +140,6 @@ 
 #define TCOBASE		0x050
 #define TCOCTL		0x054
 
-#define SBREG_BAR		0x10
 #define SBREG_SMBCTRL		0xc6000c
 #define SBREG_SMBCTRL_DNV	0xcf000c
 
@@ -1474,45 +1474,24 @@  i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
 		.version = 4,
 	};
 	struct resource *res;
-	unsigned int devfn;
-	u64 base64_addr;
-	u32 base_addr;
-	u8 hidden;
+	int ret;
 
 	/*
 	 * We must access the NO_REBOOT bit over the Primary to Sideband
-	 * bridge (P2SB). The BIOS prevents the P2SB device from being
-	 * enumerated by the PCI subsystem, so we need to unhide/hide it
-	 * to lookup the P2SB BAR.
+	 * (P2SB) bridge.
 	 */
-	pci_lock_rescan_remove();
-
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
-
-	/* Unhide the P2SB device, if it is hidden */
-	pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
-	base64_addr = base_addr & 0xfffffff0;
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
-	base64_addr |= (u64)base_addr << 32;
-
-	/* Hide the P2SB device, if it was hidden before */
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
-	pci_unlock_rescan_remove();
 
 	res = &tco_res[1];
+	ret = p2sb_bar(pci_dev->bus, 0, res);
+	if (ret)
+		return ERR_PTR(ret);
+
 	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+		res->start += SBREG_SMBCTRL_DNV;
 	else
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+		res->start += SBREG_SMBCTRL;
 
 	res->end = res->start + 3;
-	res->flags = IORESOURCE_MEM;
 
 	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
 					tco_res, 2, &pldata, sizeof(pldata));
diff --git a/drivers/platform/x86/intel/p2sb.c b/drivers/platform/x86/intel/p2sb.c
index 8c12882d0bde..644cdee4853b 100644
--- a/drivers/platform/x86/intel/p2sb.c
+++ b/drivers/platform/x86/intel/p2sb.c
@@ -29,6 +29,12 @@ 
 
 static const struct x86_cpu_id p2sb_cpu_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	PCI_DEVFN(13, 0)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D,	PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D,	PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L,		PCI_DEVFN(31, 1)),
 	{}
 };