| Message ID | 20220203151742.1457-1-francisco.iglesias@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1] hw/arm/xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs | expand |
On 3/2/22 16:17, Francisco Iglesias wrote: > 'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for > avoiding the situation where one of the models incorrectly deasserts an > interrupt asserted from the other model (which will result in that the IRQ > is lost and will not reach guest SW). > > Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> > --- > > Hi, > > I noted this after receiving a review comment (from Peter Maydell) on a similar > issue on the Versal machine while working on the OSPI series. > > Best regards, > Francisco Iglesias > > > include/hw/arm/xlnx-zynqmp.h | 2 ++ > hw/arm/xlnx-zynqmp.c | 14 ++++++++++++-- > 2 files changed, 14 insertions(+), 2 deletions(-) Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
On 15:17 Thu 03 Feb , Francisco Iglesias wrote: > 'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for > avoiding the situation where one of the models incorrectly deasserts an > interrupt asserted from the other model (which will result in that the IRQ > is lost and will not reach guest SW). > > Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc@lmichel.fr> > --- > > Hi, > > I noted this after receiving a review comment (from Peter Maydell) on a similar > issue on the Versal machine while working on the OSPI series. > > Best regards, > Francisco Iglesias > > > include/hw/arm/xlnx-zynqmp.h | 2 ++ > hw/arm/xlnx-zynqmp.c | 14 ++++++++++++-- > 2 files changed, 14 insertions(+), 2 deletions(-) > > diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h > index 062e637fe4..9424f81c37 100644 > --- a/include/hw/arm/xlnx-zynqmp.h > +++ b/include/hw/arm/xlnx-zynqmp.h > @@ -38,6 +38,7 @@ > #include "hw/dma/xlnx_csu_dma.h" > #include "hw/nvram/xlnx-bbram.h" > #include "hw/nvram/xlnx-zynqmp-efuse.h" > +#include "hw/or-irq.h" > > #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp" > OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) > @@ -122,6 +123,7 @@ struct XlnxZynqMPState { > XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH]; > XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH]; > XlnxCSUDMA qspi_dma; > + qemu_or_irq qspi_irq_orgate; > > char *boot_cpu; > ARMCPU *boot_cpu_ptr; > diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c > index 1c52a575aa..5fbf38c466 100644 > --- a/hw/arm/xlnx-zynqmp.c > +++ b/hw/arm/xlnx-zynqmp.c > @@ -50,6 +50,7 @@ > #define LQSPI_ADDR 0xc0000000 > #define QSPI_IRQ 15 > #define QSPI_DMA_ADDR 0xff0f0800 > +#define NUM_QSPI_IRQ_LINES 2 > > #define DP_ADDR 0xfd4a0000 > #define DP_IRQ 113 > @@ -362,6 +363,8 @@ static void xlnx_zynqmp_init(Object *obj) > } > > object_initialize_child(obj, "qspi-dma", &s->qspi_dma, TYPE_XLNX_CSU_DMA); > + object_initialize_child(obj, "qspi-irq-orgate", > + &s->qspi_irq_orgate, TYPE_OR_IRQ); > } > > static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) > @@ -709,6 +712,11 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) > gic_spi[adma_ch_intr[i]]); > } > > + object_property_set_int(OBJECT(&s->qspi_irq_orgate), > + "num-lines", NUM_QSPI_IRQ_LINES, &error_fatal); > + qdev_realize(DEVICE(&s->qspi_irq_orgate), NULL, &error_fatal); > + qdev_connect_gpio_out(DEVICE(&s->qspi_irq_orgate), 0, gic_spi[QSPI_IRQ]); > + > if (!object_property_set_link(OBJECT(&s->qspi_dma), "dma", > OBJECT(system_memory), errp)) { > return; > @@ -718,7 +726,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) > } > > sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR); > - sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, gic_spi[QSPI_IRQ]); > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, > + qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 0)); > > if (!object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma", > OBJECT(&s->qspi_dma), errp)) { > @@ -729,7 +738,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) > } > sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR); > sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR); > - sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]); > + sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, > + qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 1)); > > for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) { > g_autofree gchar *bus_name = g_strdup_printf("qspi%d", i); > -- > 2.11.0 > --
On Thu, 3 Feb 2022 at 15:17, Francisco Iglesias <francisco.iglesias@xilinx.com> wrote: > > 'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for > avoiding the situation where one of the models incorrectly deasserts an > interrupt asserted from the other model (which will result in that the IRQ > is lost and will not reach guest SW). > > Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Applied to target-arm.next, thanks. -- PMM
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index 062e637fe4..9424f81c37 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -38,6 +38,7 @@ #include "hw/dma/xlnx_csu_dma.h" #include "hw/nvram/xlnx-bbram.h" #include "hw/nvram/xlnx-zynqmp-efuse.h" +#include "hw/or-irq.h" #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -122,6 +123,7 @@ struct XlnxZynqMPState { XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH]; XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH]; XlnxCSUDMA qspi_dma; + qemu_or_irq qspi_irq_orgate; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index 1c52a575aa..5fbf38c466 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -50,6 +50,7 @@ #define LQSPI_ADDR 0xc0000000 #define QSPI_IRQ 15 #define QSPI_DMA_ADDR 0xff0f0800 +#define NUM_QSPI_IRQ_LINES 2 #define DP_ADDR 0xfd4a0000 #define DP_IRQ 113 @@ -362,6 +363,8 @@ static void xlnx_zynqmp_init(Object *obj) } object_initialize_child(obj, "qspi-dma", &s->qspi_dma, TYPE_XLNX_CSU_DMA); + object_initialize_child(obj, "qspi-irq-orgate", + &s->qspi_irq_orgate, TYPE_OR_IRQ); } static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) @@ -709,6 +712,11 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) gic_spi[adma_ch_intr[i]]); } + object_property_set_int(OBJECT(&s->qspi_irq_orgate), + "num-lines", NUM_QSPI_IRQ_LINES, &error_fatal); + qdev_realize(DEVICE(&s->qspi_irq_orgate), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&s->qspi_irq_orgate), 0, gic_spi[QSPI_IRQ]); + if (!object_property_set_link(OBJECT(&s->qspi_dma), "dma", OBJECT(system_memory), errp)) { return; @@ -718,7 +726,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR); - sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, gic_spi[QSPI_IRQ]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, + qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 0)); if (!object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma", OBJECT(&s->qspi_dma), errp)) { @@ -729,7 +738,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR); sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR); - sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, + qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 1)); for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) { g_autofree gchar *bus_name = g_strdup_printf("qspi%d", i);
'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for avoiding the situation where one of the models incorrectly deasserts an interrupt asserted from the other model (which will result in that the IRQ is lost and will not reach guest SW). Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> --- Hi, I noted this after receiving a review comment (from Peter Maydell) on a similar issue on the Versal machine while working on the OSPI series. Best regards, Francisco Iglesias include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zynqmp.c | 14 ++++++++++++-- 2 files changed, 14 insertions(+), 2 deletions(-)