| Message ID | 20220207174933.20909-1-rayyan@ansari.sh (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: dts: qcom: pm8226: Add VADC node | expand |
On 2022-02-07 17:49, Rayyan Ansari wrote: > Add a node for the voltage ADC (VADC) found in PM8226. > > Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> > --- > arch/arm/boot/dts/qcom-pm8226.dtsi | 33 ++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi > b/arch/arm/boot/dts/qcom-pm8226.dtsi > index b3d0f7b5874d..a651b4c941b8 100644 > --- a/arch/arm/boot/dts/qcom-pm8226.dtsi > +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi > @@ -40,6 +40,39 @@ smbb: charger@1000 { > chg_otg: otg-vbus { }; > }; > > + pm8226_vadc: adc@3100 { > + compatible = "qcom,spmi-vadc"; > + reg = <0x3100>; > + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > + #address-cells = <1>; > + #size-cells = <0>; > + #io-channel-cells = <1>; > + > + adc-chan@7 { > + reg = <VADC_VSYS>; > + qcom,pre-scaling = <1 3>; > + label = "vph_pwr"; > + }; > + adc-chan@8 { > + reg = <VADC_DIE_TEMP>; > + label = "die_temp"; > + }; > + adc-chan@9 { > + reg = <VADC_REF_625MV>; > + label = "ref_625mv"; > + }; > + adc-chan@a { > + reg = <VADC_REF_1250MV>; > + label = "ref_1250mv"; > + }; > + adc-chan@e { > + reg = <VADC_GND_REF>; > + }; > + adc-chan@f { > + reg = <VADC_VDD_VADC>; > + }; > + }; > + > pm8226_mpps: mpps@a000 { > compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; > reg = <0xa000>; Ignore this patch, I forgot to include a header.
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index b3d0f7b5874d..a651b4c941b8 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -40,6 +40,39 @@ smbb: charger@1000 { chg_otg: otg-vbus { }; }; + pm8226_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + adc-chan@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + adc-chan@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = <VADC_GND_REF>; + }; + adc-chan@f { + reg = <VADC_VDD_VADC>; + }; + }; + pm8226_mpps: mpps@a000 { compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; reg = <0xa000>;
Add a node for the voltage ADC (VADC) found in PM8226. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> --- arch/arm/boot/dts/qcom-pm8226.dtsi | 33 ++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)