diff mbox series

[12/12] ARM: dts: sti: move usb picophy nodes in stih410-b2260.dts

Message ID 20211202075105.195664-13-avolmat@me.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: sti: various DT fixes to avoid warnings | expand

Commit Message

Alain Volmat Dec. 2, 2021, 7:51 a.m. UTC 
Update usb picophy nodes out of the soc section following the
related update within the stih410.dtsi file.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-b2260.dts | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Patrice CHOTARD Feb. 10, 2022, 8:38 a.m. UTC | #1 
Hi Alain

On 12/2/21 08:51, Alain Volmat wrote:
> Update usb picophy nodes out of the soc section following the
> related update within the stih410.dtsi file.
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  arch/arm/boot/dts/stih410-b2260.dts | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index c2d3b6de55d0..26d93f26f6d0 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -82,6 +82,14 @@ phy_port1: port@9b2a000 {
>  		};
>  	};
>  
> +	usb2_picophy1: phy2 {
> +		status = "okay";
> +	};
> +
> +	usb2_picophy2: phy3 {
> +		status = "okay";
> +	};
> +
>  	soc {
>  		/* Low speed expansion connector */
>  		uart0: serial@9830000 {
> @@ -152,14 +160,6 @@ pwm1: pwm@9510000 {
>  			status = "okay";
>  		};
>  
> -		usb2_picophy1: phy2@0 {
> -			status = "okay";
> -		};
> -
> -		usb2_picophy2: phy3@0 {
> -			status = "okay";
> -		};
> -
>  		ohci0: usb@9a03c00 {
>  			status = "okay";
>  		};
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index c2d3b6de55d0..26d93f26f6d0 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -82,6 +82,14 @@  phy_port1: port@9b2a000 {
 		};
 	};
 
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 		/* Low speed expansion connector */
 		uart0: serial@9830000 {
@@ -152,14 +160,6 @@  pwm1: pwm@9510000 {
 			status = "okay";
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};