Message ID | 20220212003454.3214726-1-jeremy.linton@arm.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [BUG/PATCH,v2] net: mvpp2: always set port pcs ops | expand |
On Fri, Feb 11, 2022 at 06:34:54PM -0600, Jeremy Linton wrote: > Booting a MACCHIATObin with 5.17, the system OOPs with > a null pointer deref when the network is started. This > is caused by the pcs->ops structure being null in > mcpp2_acpi_start() when it tries to call pcs_config(). > > Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops, > assuring they are always set, fixes the problem. > > The OOPs looks like: > [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010 > [ 18.698561] Mem abort info: > [ 18.698564] ESR = 0x96000004 > [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits > [ 18.709821] SET = 0, FnV = 0 > [ 18.714292] EA = 0, S1PTW = 0 > [ 18.718833] FSC = 0x04: level 0 translation fault > [ 18.725126] Data abort info: > [ 18.729408] ISV = 0, ISS = 0x00000004 > [ 18.734655] CM = 0, WnR = 0 > [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000 > [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 > [ 18.752235] Internal error: Oops: 96000004 [#1] SMP > [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam > [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1 > [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019 > [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) > [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2] > [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2] > [ 18.812197] sp : ffff80000b4732c0 > [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8 > [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8 > [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68 > [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014 > [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa > [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2 > [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0 > [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000 > [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8 > [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68 > [ 18.887183] Call trace: > [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2] > [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2] > [ 18.898483] __dev_open+0x128/0x1e4 > [ 18.901988] __dev_change_flags+0x17c/0x1d0 > [ 18.906187] dev_change_flags+0x30/0x70 > [ 18.910038] do_setlink+0x278/0xa7c > [ 18.913540] __rtnl_newlink+0x44c/0x7d0 > [ 18.917391] rtnl_newlink+0x5c/0x8c > [ 18.920892] rtnetlink_rcv_msg+0x254/0x314 > [ 18.925006] netlink_rcv_skb+0x48/0x10c > [ 18.928858] rtnetlink_rcv+0x24/0x30 > [ 18.932449] netlink_unicast+0x290/0x2f4 > [ 18.936386] netlink_sendmsg+0x1d0/0x41c > [ 18.940323] sock_sendmsg+0x60/0x70 > [ 18.943825] ____sys_sendmsg+0x248/0x260 > [ 18.947762] ___sys_sendmsg+0x74/0xa0 > [ 18.951438] __sys_sendmsg+0x64/0xcc > [ 18.955027] __arm64_sys_sendmsg+0x30/0x40 > [ 18.959140] invoke_syscall+0x50/0x120 > [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4 > [ 18.967629] do_el0_svc+0x30/0x9c > [ 18.970958] el0_svc+0x28/0xb0 > [ 18.974025] el0t_64_sync_handler+0x10c/0x140 > [ 18.978400] el0t_64_sync+0x1a4/0x1a8 > [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5) > [ 18.988196] ---[ end trace 0000000000000000 ]--- > > Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface") > Suggested-by: Russel King (Oracle) <rmk+kernel@armlinux.org.uk> Please spell my name correctly, especially in attributations. I really don't want this committed with this mistake. > Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> > --- > drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > index 7cdbf8b8bbf6..1a835b48791b 100644 > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > @@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev, > dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE; > dev->dev.of_node = port_node; > > + port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; > + port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; > + > if (!mvpp2_use_acpi_compat_mode(port_fwnode)) { > port->phylink_config.dev = &dev->dev; > port->phylink_config.type = PHYLINK_NETDEV; > @@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev, > port->phylink_config.supported_interfaces); > } > > - port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; > - port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; > - > phylink = phylink_create(&port->phylink_config, port_fwnode, > phy_mode, &mvpp2_phylink_ops); > if (IS_ERR(phylink)) { > -- > 2.34.1 > >
Hi, On 2/12/22 04:00, Russell King (Oracle) wrote: > On Fri, Feb 11, 2022 at 06:34:54PM -0600, Jeremy Linton wrote: >> Booting a MACCHIATObin with 5.17, the system OOPs with >> a null pointer deref when the network is started. This >> is caused by the pcs->ops structure being null in >> mcpp2_acpi_start() when it tries to call pcs_config(). >> >> Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops, >> assuring they are always set, fixes the problem. >> >> The OOPs looks like: >> [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010 >> [ 18.698561] Mem abort info: >> [ 18.698564] ESR = 0x96000004 >> [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits >> [ 18.709821] SET = 0, FnV = 0 >> [ 18.714292] EA = 0, S1PTW = 0 >> [ 18.718833] FSC = 0x04: level 0 translation fault >> [ 18.725126] Data abort info: >> [ 18.729408] ISV = 0, ISS = 0x00000004 >> [ 18.734655] CM = 0, WnR = 0 >> [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000 >> [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 >> [ 18.752235] Internal error: Oops: 96000004 [#1] SMP >> [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam >> [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1 >> [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019 >> [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) >> [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2] >> [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2] >> [ 18.812197] sp : ffff80000b4732c0 >> [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8 >> [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8 >> [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68 >> [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014 >> [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa >> [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2 >> [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0 >> [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000 >> [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8 >> [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68 >> [ 18.887183] Call trace: >> [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2] >> [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2] >> [ 18.898483] __dev_open+0x128/0x1e4 >> [ 18.901988] __dev_change_flags+0x17c/0x1d0 >> [ 18.906187] dev_change_flags+0x30/0x70 >> [ 18.910038] do_setlink+0x278/0xa7c >> [ 18.913540] __rtnl_newlink+0x44c/0x7d0 >> [ 18.917391] rtnl_newlink+0x5c/0x8c >> [ 18.920892] rtnetlink_rcv_msg+0x254/0x314 >> [ 18.925006] netlink_rcv_skb+0x48/0x10c >> [ 18.928858] rtnetlink_rcv+0x24/0x30 >> [ 18.932449] netlink_unicast+0x290/0x2f4 >> [ 18.936386] netlink_sendmsg+0x1d0/0x41c >> [ 18.940323] sock_sendmsg+0x60/0x70 >> [ 18.943825] ____sys_sendmsg+0x248/0x260 >> [ 18.947762] ___sys_sendmsg+0x74/0xa0 >> [ 18.951438] __sys_sendmsg+0x64/0xcc >> [ 18.955027] __arm64_sys_sendmsg+0x30/0x40 >> [ 18.959140] invoke_syscall+0x50/0x120 >> [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4 >> [ 18.967629] do_el0_svc+0x30/0x9c >> [ 18.970958] el0_svc+0x28/0xb0 >> [ 18.974025] el0t_64_sync_handler+0x10c/0x140 >> [ 18.978400] el0t_64_sync+0x1a4/0x1a8 >> [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5) >> [ 18.988196] ---[ end trace 0000000000000000 ]--- >> >> Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface") >> Suggested-by: Russel King (Oracle) <rmk+kernel@armlinux.org.uk> > > Please spell my name correctly, especially in attributations. I really > don't want this committed with this mistake. Sorry about that, no real excuse, I have posted a v3 with that corrected. Thanks again for you help. > >> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> >> --- >> drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c >> index 7cdbf8b8bbf6..1a835b48791b 100644 >> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c >> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c >> @@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev, >> dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE; >> dev->dev.of_node = port_node; >> >> + port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; >> + port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; >> + >> if (!mvpp2_use_acpi_compat_mode(port_fwnode)) { >> port->phylink_config.dev = &dev->dev; >> port->phylink_config.type = PHYLINK_NETDEV; >> @@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev, >> port->phylink_config.supported_interfaces); >> } >> >> - port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; >> - port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; >> - >> phylink = phylink_create(&port->phylink_config, port_fwnode, >> phy_mode, &mvpp2_phylink_ops); >> if (IS_ERR(phylink)) { >> -- >> 2.34.1 >> >> >
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 7cdbf8b8bbf6..1a835b48791b 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev, dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE; dev->dev.of_node = port_node; + port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; + port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; + if (!mvpp2_use_acpi_compat_mode(port_fwnode)) { port->phylink_config.dev = &dev->dev; port->phylink_config.type = PHYLINK_NETDEV; @@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev, port->phylink_config.supported_interfaces); } - port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; - port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops; - phylink = phylink_create(&port->phylink_config, port_fwnode, phy_mode, &mvpp2_phylink_ops); if (IS_ERR(phylink)) {
Booting a MACCHIATObin with 5.17, the system OOPs with a null pointer deref when the network is started. This is caused by the pcs->ops structure being null in mcpp2_acpi_start() when it tries to call pcs_config(). Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops, assuring they are always set, fixes the problem. The OOPs looks like: [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010 [ 18.698561] Mem abort info: [ 18.698564] ESR = 0x96000004 [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.709821] SET = 0, FnV = 0 [ 18.714292] EA = 0, S1PTW = 0 [ 18.718833] FSC = 0x04: level 0 translation fault [ 18.725126] Data abort info: [ 18.729408] ISV = 0, ISS = 0x00000004 [ 18.734655] CM = 0, WnR = 0 [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000 [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 18.752235] Internal error: Oops: 96000004 [#1] SMP [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1 [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019 [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2] [ 18.812197] sp : ffff80000b4732c0 [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8 [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8 [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68 [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014 [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2 [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0 [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000 [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8 [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68 [ 18.887183] Call trace: [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2] [ 18.898483] __dev_open+0x128/0x1e4 [ 18.901988] __dev_change_flags+0x17c/0x1d0 [ 18.906187] dev_change_flags+0x30/0x70 [ 18.910038] do_setlink+0x278/0xa7c [ 18.913540] __rtnl_newlink+0x44c/0x7d0 [ 18.917391] rtnl_newlink+0x5c/0x8c [ 18.920892] rtnetlink_rcv_msg+0x254/0x314 [ 18.925006] netlink_rcv_skb+0x48/0x10c [ 18.928858] rtnetlink_rcv+0x24/0x30 [ 18.932449] netlink_unicast+0x290/0x2f4 [ 18.936386] netlink_sendmsg+0x1d0/0x41c [ 18.940323] sock_sendmsg+0x60/0x70 [ 18.943825] ____sys_sendmsg+0x248/0x260 [ 18.947762] ___sys_sendmsg+0x74/0xa0 [ 18.951438] __sys_sendmsg+0x64/0xcc [ 18.955027] __arm64_sys_sendmsg+0x30/0x40 [ 18.959140] invoke_syscall+0x50/0x120 [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4 [ 18.967629] do_el0_svc+0x30/0x9c [ 18.970958] el0_svc+0x28/0xb0 [ 18.974025] el0t_64_sync_handler+0x10c/0x140 [ 18.978400] el0t_64_sync+0x1a4/0x1a8 [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5) [ 18.988196] ---[ end trace 0000000000000000 ]--- Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface") Suggested-by: Russel King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)