| Message ID | 20211122080938.20623-1-shawn.guo@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | pinctrl: qcom: qcm2290: Add GPIO wakeirq map | expand |
On Mon, Nov 22, 2021 at 04:09:38PM +0800, Shawn Guo wrote: > It adds the map of wakeup capable GPIOs and the pins at MPM wake > controller on QCM2290, so that these GPIOs can wake up the SoC from > vlow/vmin low power mode. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Any comments on this patch? Shawn > --- > drivers/pinctrl/qcom/pinctrl-qcm2290.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-qcm2290.c b/drivers/pinctrl/qcom/pinctrl-qcm2290.c > index 3f05c0a24b79..aa9325f333fb 100644 > --- a/drivers/pinctrl/qcom/pinctrl-qcm2290.c > +++ b/drivers/pinctrl/qcom/pinctrl-qcm2290.c > @@ -1083,6 +1083,16 @@ static const struct msm_pingroup qcm2290_groups[] = { > [133] = SDC_QDSD_PINGROUP(sdc2_data, 0x86000, 9, 0), > }; > > +static const struct msm_gpio_wakeirq_map qcm2290_mpm_map[] = { > + { 0, 84 }, { 3, 75 }, { 4, 16 }, { 6, 59 }, { 8, 63 }, { 11, 17 }, > + { 13, 18 }, { 14, 51 }, { 17, 20 }, { 18, 52 }, { 19, 53 }, { 24, 6 }, > + { 25, 71 }, { 27, 73 }, { 28, 41 }, { 31, 27 }, { 32, 54 }, { 33, 55 }, > + { 34, 56 }, { 35, 57 }, { 36, 58 }, { 39, 28 }, { 46, 29 }, { 62, 60 }, > + { 63, 61 }, { 64, 62 }, { 69, 33 }, { 70, 34 }, { 72, 72 }, { 75, 35 }, > + { 79, 36 }, { 80, 21 }, { 81, 38 }, { 86, 19 }, { 87, 42 }, { 88, 43 }, > + { 89, 45 }, { 91, 74 }, { 94, 47 }, { 95, 48 }, { 96, 49 }, { 97, 50 }, > +}; > + > static const struct msm_pinctrl_soc_data qcm2290_pinctrl = { > .pins = qcm2290_pins, > .npins = ARRAY_SIZE(qcm2290_pins), > @@ -1091,6 +1101,8 @@ static const struct msm_pinctrl_soc_data qcm2290_pinctrl = { > .groups = qcm2290_groups, > .ngroups = ARRAY_SIZE(qcm2290_groups), > .ngpios = 127, > + .wakeirq_map = qcm2290_mpm_map, > + .nwakeirq_map = ARRAY_SIZE(qcm2290_mpm_map), > }; > > static int qcm2290_pinctrl_probe(struct platform_device *pdev) > -- > 2.17.1 >
On Mon, Nov 22, 2021 at 9:09 AM Shawn Guo <shawn.guo@linaro.org> wrote: > It adds the map of wakeup capable GPIOs and the pins at MPM wake > controller on QCM2290, so that these GPIOs can wake up the SoC from > vlow/vmin low power mode. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Ooops missed patch, I just applied it. Yours, Linus Walleij
diff --git a/drivers/pinctrl/qcom/pinctrl-qcm2290.c b/drivers/pinctrl/qcom/pinctrl-qcm2290.c index 3f05c0a24b79..aa9325f333fb 100644 --- a/drivers/pinctrl/qcom/pinctrl-qcm2290.c +++ b/drivers/pinctrl/qcom/pinctrl-qcm2290.c @@ -1083,6 +1083,16 @@ static const struct msm_pingroup qcm2290_groups[] = { [133] = SDC_QDSD_PINGROUP(sdc2_data, 0x86000, 9, 0), }; +static const struct msm_gpio_wakeirq_map qcm2290_mpm_map[] = { + { 0, 84 }, { 3, 75 }, { 4, 16 }, { 6, 59 }, { 8, 63 }, { 11, 17 }, + { 13, 18 }, { 14, 51 }, { 17, 20 }, { 18, 52 }, { 19, 53 }, { 24, 6 }, + { 25, 71 }, { 27, 73 }, { 28, 41 }, { 31, 27 }, { 32, 54 }, { 33, 55 }, + { 34, 56 }, { 35, 57 }, { 36, 58 }, { 39, 28 }, { 46, 29 }, { 62, 60 }, + { 63, 61 }, { 64, 62 }, { 69, 33 }, { 70, 34 }, { 72, 72 }, { 75, 35 }, + { 79, 36 }, { 80, 21 }, { 81, 38 }, { 86, 19 }, { 87, 42 }, { 88, 43 }, + { 89, 45 }, { 91, 74 }, { 94, 47 }, { 95, 48 }, { 96, 49 }, { 97, 50 }, +}; + static const struct msm_pinctrl_soc_data qcm2290_pinctrl = { .pins = qcm2290_pins, .npins = ARRAY_SIZE(qcm2290_pins), @@ -1091,6 +1101,8 @@ static const struct msm_pinctrl_soc_data qcm2290_pinctrl = { .groups = qcm2290_groups, .ngroups = ARRAY_SIZE(qcm2290_groups), .ngpios = 127, + .wakeirq_map = qcm2290_mpm_map, + .nwakeirq_map = ARRAY_SIZE(qcm2290_mpm_map), }; static int qcm2290_pinctrl_probe(struct platform_device *pdev)
It adds the map of wakeup capable GPIOs and the pins at MPM wake controller on QCM2290, so that these GPIOs can wake up the SoC from vlow/vmin low power mode. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/pinctrl/qcom/pinctrl-qcm2290.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)