diff mbox series

ima: Calculate digest in ima_inode_hash() if not available

Message ID 20220211104828.4061334-1-roberto.sassu@huawei.com (mailing list archive)
State Changes Requested
Delegated to: BPF
Headers show
Series ima: Calculate digest in ima_inode_hash() if not available | expand

Checks

Context Check Description
bpf/vmtest-bpf-next-PR success PR summary
bpf/vmtest-bpf-next success VM_Test
netdev/tree_selection success Not a local patch

Commit Message

Roberto Sassu Feb. 11, 2022, 10:48 a.m. UTC
__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.

Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
interested in obtaining the information without having to setup an IMA
policy so that the digest is always available at the time they call one of
those functions.

Open a new file descriptor in __ima_inode_hash(), so that this function
could invoke ima_collect_measurement() to calculate the digest if it is not
available. Still return -EOPNOTSUPP if the calculation failed.

Instead of opening a new file descriptor, the one from ima_file_hash()
could have been used. However, since ima_inode_hash() was created to obtain
the digest when the file descriptor is not available, it could benefit from
this change too. Also, the opened file descriptor might be not suitable for
use (file descriptor opened not for reading).

This change does not cause memory usage increase, due to using a temporary
integrity_iint_cache structure for the digest calculation, and due to
freeing the ima_digest_data structure inside integrity_iint_cache before
exiting from __ima_inode_hash().

Finally, update the test by removing ima_setup.sh (it is not necessary
anymore to set an IMA policy) and by directly executing /bin/true.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
---
 security/integrity/ima/ima_main.c             |  46 ++++++-
 tools/testing/selftests/bpf/Makefile          |   1 -
 tools/testing/selftests/bpf/ima_setup.sh      | 123 ------------------
 .../selftests/bpf/prog_tests/test_ima.c       |  25 +---
 4 files changed, 43 insertions(+), 152 deletions(-)
 delete mode 100755 tools/testing/selftests/bpf/ima_setup.sh

Comments

Mimi Zohar Feb. 11, 2022, 12:40 p.m. UTC | #1
Hi Roberto,

On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> __ima_inode_hash() checks if a digest has been already calculated by
> looking for the integrity_iint_cache structure associated to the passed
> inode.
> 
> Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> interested in obtaining the information without having to setup an IMA
> policy so that the digest is always available at the time they call one of
> those functions.

Things obviously changed, but the original use case for this interface,
as I recall, was a quick way to determine if a file had been accessed
on the system.
Roberto Sassu Feb. 11, 2022, 12:57 p.m. UTC | #2
> From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> Sent: Friday, February 11, 2022 1:41 PM
> Hi Roberto,
> 
> On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> > __ima_inode_hash() checks if a digest has been already calculated by
> > looking for the integrity_iint_cache structure associated to the passed
> > inode.
> >
> > Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> > interested in obtaining the information without having to setup an IMA
> > policy so that the digest is always available at the time they call one of
> > those functions.
> 
> Things obviously changed, but the original use case for this interface,
> as I recall, was a quick way to determine if a file had been accessed
> on the system.

Hi Mimi

thanks for the info. I was not sure if I should export a new
function or reuse the existing one. In my use case, just calculating
the digest would be sufficient.

For finding whether a file was accessed (assuming that it matches
the policy), probably bpf_ima_inode_hash() is not anyway too reliable.
If integrity_iint_cache is evicted from the memory, it would report
that the inode was not accessed even if it was.

Thanks

Roberto

HUAWEI TECHNOLOGIES Duesseldorf GmbH, HRB 56063
Managing Director: Li Peng, Zhong Ronghua

> --
> thanks,
> 
> Mimi
Florent Revest Feb. 11, 2022, 1:11 p.m. UTC | #3
On Fri, Feb 11, 2022 at 1:58 PM Roberto Sassu <roberto.sassu@huawei.com> wrote:
>
> > From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> > Sent: Friday, February 11, 2022 1:41 PM
> > Hi Roberto,
> >
> > On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> > > __ima_inode_hash() checks if a digest has been already calculated by
> > > looking for the integrity_iint_cache structure associated to the passed
> > > inode.
> > >
> > > Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> > > interested in obtaining the information without having to setup an IMA
> > > policy so that the digest is always available at the time they call one of
> > > those functions.
> >
> > Things obviously changed, but the original use case for this interface,
> > as I recall, was a quick way to determine if a file had been accessed
> > on the system.

I believe we were the main users of this and I can confirm we are no
longer using this interface to determine if a file has been accessed.

> Hi Mimi
>
> thanks for the info. I was not sure if I should export a new
> function or reuse the existing one. In my use case, just calculating
> the digest would be sufficient.

It would actually be nice for us too, sometimes we attach to hooks
just before the hash is calculated and being able to calculate the
hash would be helpful.

> For finding whether a file was accessed (assuming that it matches
> the policy), probably bpf_ima_inode_hash() is not anyway too reliable.
> If integrity_iint_cache is evicted from the memory, it would report
> that the inode was not accessed even if it was.

I agree indeed, we'd have better ways to do this now.

> Thanks
>
> Roberto
>
> HUAWEI TECHNOLOGIES Duesseldorf GmbH, HRB 56063
> Managing Director: Li Peng, Zhong Ronghua
>
> > --
> > thanks,
> >
> > Mimi
>
Mimi Zohar Feb. 13, 2022, 1:06 p.m. UTC | #4
Hi Roberto,

On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> __ima_inode_hash() checks if a digest has been already calculated by
> looking for the integrity_iint_cache structure associated to the passed
> inode.
> 
> Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> interested in obtaining the information without having to setup an IMA
> policy so that the digest is always available at the time they call one of
> those functions.
> 
> Open a new file descriptor in __ima_inode_hash(), so that this function
> could invoke ima_collect_measurement() to calculate the digest if it is not
> available. Still return -EOPNOTSUPP if the calculation failed.
> 
> Instead of opening a new file descriptor, the one from ima_file_hash()
> could have been used. However, since ima_inode_hash() was created to obtain
> the digest when the file descriptor is not available, it could benefit from
> this change too. Also, the opened file descriptor might be not suitable for
> use (file descriptor opened not for reading).
> 
> This change does not cause memory usage increase, due to using a temporary
> integrity_iint_cache structure for the digest calculation, and due to
> freeing the ima_digest_data structure inside integrity_iint_cache before
> exiting from __ima_inode_hash().
> 
> Finally, update the test by removing ima_setup.sh (it is not necessary
> anymore to set an IMA policy) and by directly executing /bin/true.
> 
> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>

Although this patch doesn't directly modify either ima_file_hash() or
ima_inode_hash(),  this change affects both functions.  ima_file_hash()
was introduced to be used with eBPF.  Based on Florent's post, changing
the ima_file_hash() behavor seems fine.  Since I have no idea whether
anyone is still using ima_inode_hash(), perhaps it would be safer to
limit this behavior change to just ima_file_hash().

Please update the ima_file_hash() doc.  While touching this area, I'd
appreciate your fixing the first doc line in both ima_file_hash() and
ima_inode_hash() cases, which wraps spanning two lines.

Please split the IMA from the eBPF changes.
Roberto Sassu Feb. 14, 2022, 5:05 p.m. UTC | #5
> From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> Sent: Sunday, February 13, 2022 2:06 PM
> Hi Roberto,
> 
> On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> > __ima_inode_hash() checks if a digest has been already calculated by
> > looking for the integrity_iint_cache structure associated to the passed
> > inode.
> >
> > Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> > interested in obtaining the information without having to setup an IMA
> > policy so that the digest is always available at the time they call one of
> > those functions.
> >
> > Open a new file descriptor in __ima_inode_hash(), so that this function
> > could invoke ima_collect_measurement() to calculate the digest if it is not
> > available. Still return -EOPNOTSUPP if the calculation failed.
> >
> > Instead of opening a new file descriptor, the one from ima_file_hash()
> > could have been used. However, since ima_inode_hash() was created to
> obtain
> > the digest when the file descriptor is not available, it could benefit from
> > this change too. Also, the opened file descriptor might be not suitable for
> > use (file descriptor opened not for reading).
> >
> > This change does not cause memory usage increase, due to using a temporary
> > integrity_iint_cache structure for the digest calculation, and due to
> > freeing the ima_digest_data structure inside integrity_iint_cache before
> > exiting from __ima_inode_hash().
> >
> > Finally, update the test by removing ima_setup.sh (it is not necessary
> > anymore to set an IMA policy) and by directly executing /bin/true.
> >
> > Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
> 
> Although this patch doesn't directly modify either ima_file_hash() or
> ima_inode_hash(),  this change affects both functions.  ima_file_hash()
> was introduced to be used with eBPF.  Based on Florent's post, changing
> the ima_file_hash() behavor seems fine.  Since I have no idea whether
> anyone is still using ima_inode_hash(), perhaps it would be safer to
> limit this behavior change to just ima_file_hash().

Hi Mimi

ok.

I found that just checking that iint->ima_hash is not NULL is not enough
(ima_inode_hash() might still return the old digest after a file write).
Should I replace that check with !(iint->flags & IMA_COLLECTED)?
Or should I do only for ima_file_hash() and recalculate the digest
if necessary?

> Please update the ima_file_hash() doc.  While touching this area, I'd
> appreciate your fixing the first doc line in both ima_file_hash() and
> ima_inode_hash() cases, which wraps spanning two lines.

Did you mean to make the description shorter or to have everything
in one line? According to the kernel documentation (kernel-doc.rst),
having the brief description in multiple lines should be fine.

> Please split the IMA from the eBPF changes.

Ok.

Thanks

Roberto

HUAWEI TECHNOLOGIES Duesseldorf GmbH, HRB 56063
Managing Director: Li Peng, Zhong Ronghua

> --
> thanks,
> 
> Mimi
Mimi Zohar Feb. 14, 2022, 10:32 p.m. UTC | #6
On Mon, 2022-02-14 at 17:05 +0000, Roberto Sassu wrote:
> > From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> > Sent: Sunday, February 13, 2022 2:06 PM
> > Hi Roberto,
> > 
> > On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> > > __ima_inode_hash() checks if a digest has been already calculated by
> > > looking for the integrity_iint_cache structure associated to the passed
> > > inode.
> > >
> > > Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> > > interested in obtaining the information without having to setup an IMA
> > > policy so that the digest is always available at the time they call one of
> > > those functions.
> > >
> > > Open a new file descriptor in __ima_inode_hash(), so that this function
> > > could invoke ima_collect_measurement() to calculate the digest if it is not
> > > available. Still return -EOPNOTSUPP if the calculation failed.
> > >
> > > Instead of opening a new file descriptor, the one from ima_file_hash()
> > > could have been used. However, since ima_inode_hash() was created to
> > obtain
> > > the digest when the file descriptor is not available, it could benefit from
> > > this change too. Also, the opened file descriptor might be not suitable for
> > > use (file descriptor opened not for reading).
> > >
> > > This change does not cause memory usage increase, due to using a temporary
> > > integrity_iint_cache structure for the digest calculation, and due to
> > > freeing the ima_digest_data structure inside integrity_iint_cache before
> > > exiting from __ima_inode_hash().
> > >
> > > Finally, update the test by removing ima_setup.sh (it is not necessary
> > > anymore to set an IMA policy) and by directly executing /bin/true.
> > >
> > > Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
> > 
> > Although this patch doesn't directly modify either ima_file_hash() or
> > ima_inode_hash(),  this change affects both functions.  ima_file_hash()
> > was introduced to be used with eBPF.  Based on Florent's post, changing
> > the ima_file_hash() behavor seems fine.  Since I have no idea whether
> > anyone is still using ima_inode_hash(), perhaps it would be safer to
> > limit this behavior change to just ima_file_hash().
> 
> Hi Mimi
> 
> ok.
> 
> I found that just checking that iint->ima_hash is not NULL is not enough
> (ima_inode_hash() might still return the old digest after a file write).
> Should I replace that check with !(iint->flags & IMA_COLLECTED)?
> Or should I do only for ima_file_hash() and recalculate the digest
> if necessary?

Updating the file hash after each write would really impact IMA
performance.  If you really want to detect any file change, no matter
how frequently it occurs, your best bet would be to track i_generation
and i_version.  Stefan is already adding "i_generation" for IMA
namespacing.

> 
> > Please update the ima_file_hash() doc.  While touching this area, I'd
> > appreciate your fixing the first doc line in both ima_file_hash() and
> > ima_inode_hash() cases, which wraps spanning two lines.
> 
> Did you mean to make the description shorter or to have everything
> in one line? According to the kernel documentation (kernel-doc.rst),
> having the brief description in multiple lines should be fine.

Thanks for checking kernel-doc.   The "brief description"  not wrapping
across multiple lines did in fact change.

> > Please split the IMA from the eBPF changes.
> 
> Ok.
Roberto Sassu Feb. 15, 2022, 8 a.m. UTC | #7
> From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> Sent: Monday, February 14, 2022 11:33 PM
> On Mon, 2022-02-14 at 17:05 +0000, Roberto Sassu wrote:
> > > From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> > > Sent: Sunday, February 13, 2022 2:06 PM
> > > Hi Roberto,
> > >
> > > On Fri, 2022-02-11 at 11:48 +0100, Roberto Sassu wrote:
> > > > __ima_inode_hash() checks if a digest has been already calculated by
> > > > looking for the integrity_iint_cache structure associated to the passed
> > > > inode.
> > > >
> > > > Users of ima_file_hash() and ima_inode_hash() (e.g. eBPF) might be
> > > > interested in obtaining the information without having to setup an IMA
> > > > policy so that the digest is always available at the time they call one of
> > > > those functions.
> > > >
> > > > Open a new file descriptor in __ima_inode_hash(), so that this function
> > > > could invoke ima_collect_measurement() to calculate the digest if it is not
> > > > available. Still return -EOPNOTSUPP if the calculation failed.
> > > >
> > > > Instead of opening a new file descriptor, the one from ima_file_hash()
> > > > could have been used. However, since ima_inode_hash() was created to
> > > obtain
> > > > the digest when the file descriptor is not available, it could benefit from
> > > > this change too. Also, the opened file descriptor might be not suitable for
> > > > use (file descriptor opened not for reading).
> > > >
> > > > This change does not cause memory usage increase, due to using a
> temporary
> > > > integrity_iint_cache structure for the digest calculation, and due to
> > > > freeing the ima_digest_data structure inside integrity_iint_cache before
> > > > exiting from __ima_inode_hash().
> > > >
> > > > Finally, update the test by removing ima_setup.sh (it is not necessary
> > > > anymore to set an IMA policy) and by directly executing /bin/true.
> > > >
> > > > Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
> > >
> > > Although this patch doesn't directly modify either ima_file_hash() or
> > > ima_inode_hash(),  this change affects both functions.  ima_file_hash()
> > > was introduced to be used with eBPF.  Based on Florent's post, changing
> > > the ima_file_hash() behavor seems fine.  Since I have no idea whether
> > > anyone is still using ima_inode_hash(), perhaps it would be safer to
> > > limit this behavior change to just ima_file_hash().
> >
> > Hi Mimi
> >
> > ok.
> >
> > I found that just checking that iint->ima_hash is not NULL is not enough
> > (ima_inode_hash() might still return the old digest after a file write).
> > Should I replace that check with !(iint->flags & IMA_COLLECTED)?
> > Or should I do only for ima_file_hash() and recalculate the digest
> > if necessary?
> 
> Updating the file hash after each write would really impact IMA
> performance.  If you really want to detect any file change, no matter
> how frequently it occurs, your best bet would be to track i_generation
> and i_version.  Stefan is already adding "i_generation" for IMA
> namespacing.

I just wanted the ability to get a fresh digest after a file opened
for writing is closed. Since in my use case I would not use an IMA
policy, that would not be a problem.

Thanks

Roberto

HUAWEI TECHNOLOGIES Duesseldorf GmbH, HRB 56063
Managing Director: Li Peng, Zhong Ronghua

> > > Please update the ima_file_hash() doc.  While touching this area, I'd
> > > appreciate your fixing the first doc line in both ima_file_hash() and
> > > ima_inode_hash() cases, which wraps spanning two lines.
> >
> > Did you mean to make the description shorter or to have everything
> > in one line? According to the kernel documentation (kernel-doc.rst),
> > having the brief description in multiple lines should be fine.
> 
> Thanks for checking kernel-doc.   The "brief description"  not wrapping
> across multiple lines did in fact change.
> 
> > > Please split the IMA from the eBPF changes.
> >
> > Ok.
> 
> --
> thanks,
> 
> Mimi
Mimi Zohar Feb. 15, 2022, 11:16 a.m. UTC | #8
On Tue, 2022-02-15 at 08:00 +0000, Roberto Sassu wrote:
> > >
> > > I found that just checking that iint->ima_hash is not NULL is not enough
> > > (ima_inode_hash() might still return the old digest after a file write).
> > > Should I replace that check with !(iint->flags & IMA_COLLECTED)?
> > > Or should I do only for ima_file_hash() and recalculate the digest
> > > if necessary?
> > 
> > Updating the file hash after each write would really impact IMA
> > performance.  If you really want to detect any file change, no matter
> > how frequently it occurs, your best bet would be to track i_generation
> > and i_version.  Stefan is already adding "i_generation" for IMA
> > namespacing.
> 
> I just wanted the ability to get a fresh digest after a file opened
> for writing is closed. Since in my use case I would not use an IMA
> policy, that would not be a problem.

As I recall, the __fput() delay was to prevent locking ordering issues
- inode, iint.
diff mbox series

Patch

diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 8c6e4514d494..44df3f990950 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -26,6 +26,7 @@ 
 #include <linux/ima.h>
 #include <linux/iversion.h>
 #include <linux/fs.h>
+#include <linux/fs_struct.h>
 
 #include "ima.h"
 
@@ -521,15 +522,43 @@  EXPORT_SYMBOL_GPL(ima_file_check);
 
 static int __ima_inode_hash(struct inode *inode, char *buf, size_t buf_size)
 {
-	struct integrity_iint_cache *iint;
-	int hash_algo;
+	struct integrity_iint_cache *iint = NULL, tmp_iint;
+	struct file *file;
+	struct path root, path;
+	int rc, hash_algo;
+
+	if (ima_policy_flag)
+		iint = integrity_iint_find(inode);
+
+	if (!iint) {
+		memset(&tmp_iint, 0, sizeof(tmp_iint));
+		tmp_iint.inode = inode;
+		iint = &tmp_iint;
+
+		path.dentry = d_find_alias(inode);
+		if (!path.dentry)
+			return -EOPNOTSUPP;
+
+		get_fs_root(current->fs, &root);
+		path.mnt = root.mnt;
+
+		file = dentry_open(&path, O_RDONLY, current_cred());
+		if (IS_ERR(file)) {
+			dput(path.dentry);
+			path_put(&root);
+			return -EOPNOTSUPP;
+		}
 
-	if (!ima_policy_flag)
-		return -EOPNOTSUPP;
+		rc = ima_collect_measurement(iint, file, NULL, 0, ima_hash_algo,
+					     NULL);
 
-	iint = integrity_iint_find(inode);
-	if (!iint)
-		return -EOPNOTSUPP;
+		fput(file);
+		dput(path.dentry);
+		path_put(&root);
+
+		if (rc != 0)
+			return -EOPNOTSUPP;
+	}
 
 	mutex_lock(&iint->mutex);
 
@@ -551,6 +580,9 @@  static int __ima_inode_hash(struct inode *inode, char *buf, size_t buf_size)
 	hash_algo = iint->ima_hash->algo;
 	mutex_unlock(&iint->mutex);
 
+	if (iint == &tmp_iint)
+		kfree(iint->ima_hash);
+
 	return hash_algo;
 }
 
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 42ffc24e9e71..f7f850b2cf26 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -480,7 +480,6 @@  TRUNNER_EXTRA_SOURCES := test_progs.c cgroup_helpers.c trace_helpers.c	\
 			 network_helpers.c testing_helpers.c		\
 			 btf_helpers.c flow_dissector_load.h
 TRUNNER_EXTRA_FILES := $(OUTPUT)/urandom_read $(OUTPUT)/bpf_testmod.ko	\
-		       ima_setup.sh					\
 		       $(wildcard progs/btf_dump_test_case_*.c)
 TRUNNER_BPF_BUILD_RULE := CLANG_BPF_BUILD_RULE
 TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS) -DENABLE_ATOMICS_TESTS
diff --git a/tools/testing/selftests/bpf/ima_setup.sh b/tools/testing/selftests/bpf/ima_setup.sh
deleted file mode 100755
index 8e62581113a3..000000000000
--- a/tools/testing/selftests/bpf/ima_setup.sh
+++ /dev/null
@@ -1,123 +0,0 @@ 
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-
-set -e
-set -u
-set -o pipefail
-
-IMA_POLICY_FILE="/sys/kernel/security/ima/policy"
-TEST_BINARY="/bin/true"
-VERBOSE="${SELFTESTS_VERBOSE:=0}"
-LOG_FILE="$(mktemp /tmp/ima_setup.XXXX.log)"
-
-usage()
-{
-	echo "Usage: $0 <setup|cleanup|run> <existing_tmp_dir>"
-	exit 1
-}
-
-ensure_mount_securityfs()
-{
-	local securityfs_dir=$(grep "securityfs" /proc/mounts | awk '{print $2}')
-
-	if [ -z "${securityfs_dir}" ]; then
-		securityfs_dir=/sys/kernel/security
-		mount -t securityfs security "${securityfs_dir}"
-	fi
-
-	if [ ! -d "${securityfs_dir}" ]; then
-		echo "${securityfs_dir}: securityfs is not mounted" && exit 1
-	fi
-}
-
-setup()
-{
-	local tmp_dir="$1"
-	local mount_img="${tmp_dir}/test.img"
-	local mount_dir="${tmp_dir}/mnt"
-	local copied_bin_path="${mount_dir}/$(basename ${TEST_BINARY})"
-	mkdir -p ${mount_dir}
-
-	dd if=/dev/zero of="${mount_img}" bs=1M count=10
-
-	losetup -f "${mount_img}"
-	local loop_device=$(losetup -a | grep ${mount_img:?} | cut -d ":" -f1)
-
-	mkfs.ext2 "${loop_device:?}"
-	mount "${loop_device}" "${mount_dir}"
-
-	cp "${TEST_BINARY}" "${mount_dir}"
-	local mount_uuid="$(blkid ${loop_device} | sed 's/.*UUID="\([^"]*\)".*/\1/')"
-
-	ensure_mount_securityfs
-	echo "measure func=BPRM_CHECK fsuuid=${mount_uuid}" > ${IMA_POLICY_FILE}
-}
-
-cleanup() {
-	local tmp_dir="$1"
-	local mount_img="${tmp_dir}/test.img"
-	local mount_dir="${tmp_dir}/mnt"
-
-	local loop_devices=$(losetup -a | grep ${mount_img:?} | cut -d ":" -f1)
-
-	for loop_dev in "${loop_devices}"; do
-		losetup -d $loop_dev
-	done
-
-	umount ${mount_dir}
-	rm -rf ${tmp_dir}
-}
-
-run()
-{
-	local tmp_dir="$1"
-	local mount_dir="${tmp_dir}/mnt"
-	local copied_bin_path="${mount_dir}/$(basename ${TEST_BINARY})"
-
-	exec "${copied_bin_path}"
-}
-
-catch()
-{
-	local exit_code="$1"
-	local log_file="$2"
-
-	if [[ "${exit_code}" -ne 0 ]]; then
-		cat "${log_file}" >&3
-	fi
-
-	rm -f "${log_file}"
-	exit ${exit_code}
-}
-
-main()
-{
-	[[ $# -ne 2 ]] && usage
-
-	local action="$1"
-	local tmp_dir="$2"
-
-	[[ ! -d "${tmp_dir}" ]] && echo "Directory ${tmp_dir} doesn't exist" && exit 1
-
-	if [[ "${action}" == "setup" ]]; then
-		setup "${tmp_dir}"
-	elif [[ "${action}" == "cleanup" ]]; then
-		cleanup "${tmp_dir}"
-	elif [[ "${action}" == "run" ]]; then
-		run "${tmp_dir}"
-	else
-		echo "Unknown action: ${action}"
-		exit 1
-	fi
-}
-
-trap 'catch "$?" "${LOG_FILE}"' EXIT
-
-if [[ "${VERBOSE}" -eq 0 ]]; then
-	# Save the stderr to 3 so that we can output back to
-	# it incase of an error.
-	exec 3>&2 1>"${LOG_FILE}" 2>&1
-fi
-
-main "$@"
-rm -f "${LOG_FILE}"
diff --git a/tools/testing/selftests/bpf/prog_tests/test_ima.c b/tools/testing/selftests/bpf/prog_tests/test_ima.c
index 97d8a6f84f4a..82427549f45a 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_ima.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_ima.c
@@ -13,15 +13,14 @@ 
 
 #include "ima.skel.h"
 
-static int run_measured_process(const char *measured_dir, u32 *monitored_pid)
+static int run_measured_process(u32 *monitored_pid)
 {
 	int child_pid, child_status;
 
 	child_pid = fork();
 	if (child_pid == 0) {
 		*monitored_pid = getpid();
-		execlp("./ima_setup.sh", "./ima_setup.sh", "run", measured_dir,
-		       NULL);
+		execlp("/bin/true", "/bin/true", NULL);
 		exit(errno);
 
 	} else if (child_pid > 0) {
@@ -42,10 +41,7 @@  static int process_sample(void *ctx, void *data, size_t len)
 
 void test_test_ima(void)
 {
-	char measured_dir_template[] = "/tmp/ima_measuredXXXXXX";
 	struct ring_buffer *ringbuf = NULL;
-	const char *measured_dir;
-	char cmd[256];
 
 	int err, duration = 0;
 	struct ima *skel = NULL;
@@ -63,27 +59,14 @@  void test_test_ima(void)
 	if (CHECK(err, "attach", "attach failed: %d\n", err))
 		goto close_prog;
 
-	measured_dir = mkdtemp(measured_dir_template);
-	if (CHECK(measured_dir == NULL, "mkdtemp", "err %d\n", errno))
-		goto close_prog;
-
-	snprintf(cmd, sizeof(cmd), "./ima_setup.sh setup %s", measured_dir);
-	err = system(cmd);
-	if (CHECK(err, "failed to run command", "%s, errno = %d\n", cmd, errno))
-		goto close_clean;
-
-	err = run_measured_process(measured_dir, &skel->bss->monitored_pid);
+	err = run_measured_process(&skel->bss->monitored_pid);
 	if (CHECK(err, "run_measured_process", "err = %d\n", err))
-		goto close_clean;
+		goto close_prog;
 
 	err = ring_buffer__consume(ringbuf);
 	ASSERT_EQ(err, 1, "num_samples_or_err");
 	ASSERT_NEQ(ima_hash_from_bpf, 0, "ima_hash");
 
-close_clean:
-	snprintf(cmd, sizeof(cmd), "./ima_setup.sh cleanup %s", measured_dir);
-	err = system(cmd);
-	CHECK(err, "failed to run command", "%s, errno = %d\n", cmd, errno);
 close_prog:
 	ring_buffer__free(ringbuf);
 	ima__destroy(skel);