| Message ID | 20220214163452.1568807-10-arnd@kernel.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | clean up asm/uaccess.h, kill set_fs for good | expand |
On Mon, Feb 14, 2022 at 05:34:47PM +0100, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > While most m68k platforms use separate address spaces for user > and kernel space, at least coldfire does not, and the other > ones have a TASK_SIZE that is less than the entire 4GB address > range. > > Using the generic implementation of __access_ok() stops coldfire > user space from trivially accessing kernel memory, and is probably > the right thing elsewhere for consistency as well. Perhaps simply wrap that sucker into #ifdef CONFIG_CPU_HAS_ADDRESS_SPACES (and trim the comment down to "coldfire and 68000 will pick generic variant")? > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > arch/m68k/include/asm/uaccess.h | 13 ------------- > 1 file changed, 13 deletions(-) > > diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h > index d6bb5720365a..64914872a5c9 100644 > --- a/arch/m68k/include/asm/uaccess.h > +++ b/arch/m68k/include/asm/uaccess.h > @@ -10,19 +10,6 @@ > #include <linux/compiler.h> > #include <linux/types.h> > #include <asm/extable.h> > - > -/* We let the MMU do all checking */ > -static inline int __access_ok(const void __user *addr, > - unsigned long size) > -{ > - /* > - * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check > - * for TASK_SIZE! > - * Removing this helper is probably sufficient. > - */ > - return 1; > -} > -#define __access_ok __access_ok > #include <asm-generic/access_ok.h> > > /* > -- > 2.29.2 >
On Tue, Feb 15, 2022 at 12:37:41AM +0000, Al Viro wrote: > Perhaps simply wrap that sucker into #ifdef CONFIG_CPU_HAS_ADDRESS_SPACES > (and trim the comment down to "coldfire and 68000 will pick generic > variant")? I wonder if we should invert CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, select the separate address space config for s390, sparc64, non-coldfire m68k and mips with EVA and then just have one single access_ok for overlapping address space (as added by Arnd) and non-overlapping ones (always return true).
On Tue, Feb 15, 2022 at 07:29:42AM +0100, Christoph Hellwig wrote: > On Tue, Feb 15, 2022 at 12:37:41AM +0000, Al Viro wrote: > > Perhaps simply wrap that sucker into #ifdef CONFIG_CPU_HAS_ADDRESS_SPACES > > (and trim the comment down to "coldfire and 68000 will pick generic > > variant")? > > I wonder if we should invert CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, > select the separate address space config for s390, sparc64, non-coldfire > m68k and mips with EVA and then just have one single access_ok for > overlapping address space (as added by Arnd) and non-overlapping ones > (always return true). parisc is also such... How about select ALTERNATE_SPACE_USERLAND for that bunch? While we are at it, how many unusual access_ok() instances are left after this series? arm64, itanic, um, anything else? FWIW, sparc32 has a slightly unusual instance (see uaccess_32.h there); it's obviously cheaper than generic and I wonder if the trick is legitimate (and applicable elsewhere, perhaps)...
On Tue, Feb 15, 2022 at 8:13 AM Al Viro <viro@zeniv.linux.org.uk> wrote: > On Tue, Feb 15, 2022 at 07:29:42AM +0100, Christoph Hellwig wrote: > > On Tue, Feb 15, 2022 at 12:37:41AM +0000, Al Viro wrote: > > > Perhaps simply wrap that sucker into #ifdef CONFIG_CPU_HAS_ADDRESS_SPACES > > > (and trim the comment down to "coldfire and 68000 will pick generic > > > variant")? > > > > I wonder if we should invert CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, > > select the separate address space config for s390, sparc64, non-coldfire > > m68k and mips with EVA and then just have one single access_ok for > > overlapping address space (as added by Arnd) and non-overlapping ones > > (always return true). > > parisc is also such... How about > > select ALTERNATE_SPACE_USERLAND > > for that bunch? Either of those works for me. My current version has this keyed off TASK_SIZE_MAX==ULONG_MAX, but a CONFIG_ symbol does look more descriptive. > While we are at it, how many unusual access_ok() instances are > left after this series? arm64, itanic, um, anything else? x86 adds a WARN_ON_IN_IRQ() check in there. This could be made generic, but it's not obvious what exactly the exceptions are that other architectures need. The arm64 tagged pointers could probably also get integrated into the generic version. > FWIW, sparc32 has a slightly unusual instance (see uaccess_32.h there); it's > obviously cheaper than generic and I wonder if the trick is legitimate (and > applicable elsewhere, perhaps)... Right, a few others have the same, but I wasn't convinced that this is actually safe for call possible cases: it's trivial to construct a caller that works on other architectures but not this one, if you pass a large enough size value and don't access the contents in sequence. Also, like the ((addr | (addr + size)) & MASK) check on some other architectures, it is less portable because it makes assumptions about the actual layout beyond a fixed address limit. Arnd
From: Arnd Bergmann > Sent: 15 February 2022 10:02 > > On Tue, Feb 15, 2022 at 8:13 AM Al Viro <viro@zeniv.linux.org.uk> wrote: > > On Tue, Feb 15, 2022 at 07:29:42AM +0100, Christoph Hellwig wrote: > > > On Tue, Feb 15, 2022 at 12:37:41AM +0000, Al Viro wrote: > > > > Perhaps simply wrap that sucker into #ifdef CONFIG_CPU_HAS_ADDRESS_SPACES > > > > (and trim the comment down to "coldfire and 68000 will pick generic > > > > variant")? > > > > > > I wonder if we should invert CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, > > > select the separate address space config for s390, sparc64, non-coldfire > > > m68k and mips with EVA and then just have one single access_ok for > > > overlapping address space (as added by Arnd) and non-overlapping ones > > > (always return true). > > > > parisc is also such... How about > > > > select ALTERNATE_SPACE_USERLAND > > > > for that bunch? > > Either of those works for me. My current version has this keyed off > TASK_SIZE_MAX==ULONG_MAX, but a CONFIG_ symbol does > look more descriptive. > > > While we are at it, how many unusual access_ok() instances are > > left after this series? arm64, itanic, um, anything else? > > x86 adds a WARN_ON_IN_IRQ() check in there. If is a noop unless CONFIG_DEBUG_ATOMIC_SLEEP is set. I doubt that is often enabled. > This could be > made generic, but it's not obvious what exactly the exceptions are > that other architectures need. The arm64 tagged pointers could > probably also get integrated into the generic version. > > > FWIW, sparc32 has a slightly unusual instance (see uaccess_32.h there); it's > > obviously cheaper than generic and I wonder if the trick is legitimate (and > > applicable elsewhere, perhaps)... > > Right, a few others have the same, but I wasn't convinced that this > is actually safe for call possible cases: it's trivial to construct a caller > that works on other architectures but not this one, if you pass a large > enough size value and don't access the contents in sequence. You'd need code that did an access_ok() check and then read from a large offset from the address - unlikely. It's not like the access_ok() check for read/write is done on syscall entry and then everything underneath assumes it is valid. Hasn't (almost) everything been checked for function calls between user_access_begin() and the actual accesses? And access_ok() is done by/at the same time as user_access_begin()? You do need an unmapped page above the address that is tested. > Also, like the ((addr | (addr + size)) & MASK) check on some other > architectures, it is less portable because it makes assumptions about > the actual layout beyond a fixed address limit. Isn't that test broken without a separate bound check on size? I also seem to remember that access_ok(xxx, 0) is always 'ok' and some of the 'fast' tests give a false negative if the user buffer ends with the last byte of user address space. So you may need: size < TASK_SIZE && (addr < (TASK_SIZE - size - 1) || !size) (sprinkled with [un]likely()) David - Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index d6bb5720365a..64914872a5c9 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -10,19 +10,6 @@ #include <linux/compiler.h> #include <linux/types.h> #include <asm/extable.h> - -/* We let the MMU do all checking */ -static inline int __access_ok(const void __user *addr, - unsigned long size) -{ - /* - * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check - * for TASK_SIZE! - * Removing this helper is probably sufficient. - */ - return 1; -} -#define __access_ok __access_ok #include <asm-generic/access_ok.h> /*