Message ID | 20220103162414.27723-8-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | media: Drop .set_mbus_config(), improve .get_mbus_config() | expand |
Hi Laurent On Mon, Jan 03, 2022 at 06:24:13PM +0200, Laurent Pinchart wrote: > The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only > V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never > read. Drop those flags. Virtual channel information should be conveyed > through frame descriptors instead. I see one more user in the latest media master drivers/media/platform/atmel/microchip-csi2dc.c: if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_0) With that fixed Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Thanks j > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/media/i2c/adv7180.c | 1 - > include/media/v4l2-mediabus.h | 10 ---------- > 2 files changed, 11 deletions(-) > > diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c > index 286f5017d9c3..3ff37a550810 100644 > --- a/drivers/media/i2c/adv7180.c > +++ b/drivers/media/i2c/adv7180.c > @@ -786,7 +786,6 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd, > cfg->type = V4L2_MBUS_CSI2_DPHY; > cfg->bus.mipi_csi2.num_data_lanes = 1; > cfg->bus.mipi_csi2.flags = > - V4L2_MBUS_CSI2_CHANNEL_0 | > V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; > } else { > /* > diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h > index 44195ceeccca..c6626a22b394 100644 > --- a/include/media/v4l2-mediabus.h > +++ b/include/media/v4l2-mediabus.h > @@ -67,20 +67,10 @@ > #define V4L2_MBUS_DATA_ENABLE_LOW BIT(15) > > /* Serial flags */ > -/* CSI-2 Virtual Channel identifiers. */ > -#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4) > -#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5) > -#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6) > -#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7) > /* Clock non-continuous mode support. */ > #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8) > #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9) > > -#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | \ > - V4L2_MBUS_CSI2_CHANNEL_1 | \ > - V4L2_MBUS_CSI2_CHANNEL_2 | \ > - V4L2_MBUS_CSI2_CHANNEL_3) > - > #define V4L2_MBUS_CSI2_MAX_DATA_LANES 8 > > /** > -- > Regards, > > Laurent Pinchart >
Hi Jacopo, On Tue, Feb 15, 2022 at 12:01:41PM +0100, Jacopo Mondi wrote: > On Mon, Jan 03, 2022 at 06:24:13PM +0200, Laurent Pinchart wrote: > > The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only > > V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never > > read. Drop those flags. Virtual channel information should be conveyed > > through frame descriptors instead. > > I see one more user in the latest media master > drivers/media/platform/atmel/microchip-csi2dc.c: if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_0) Sakari has sent https://lore.kernel.org/linux-media/20220202153609.240387-1-sakari.ailus@linux.intel.com to address this. Sakari, will you take the remainder of this series in your tree ? > With that fixed > Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > --- > > drivers/media/i2c/adv7180.c | 1 - > > include/media/v4l2-mediabus.h | 10 ---------- > > 2 files changed, 11 deletions(-) > > > > diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c > > index 286f5017d9c3..3ff37a550810 100644 > > --- a/drivers/media/i2c/adv7180.c > > +++ b/drivers/media/i2c/adv7180.c > > @@ -786,7 +786,6 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd, > > cfg->type = V4L2_MBUS_CSI2_DPHY; > > cfg->bus.mipi_csi2.num_data_lanes = 1; > > cfg->bus.mipi_csi2.flags = > > - V4L2_MBUS_CSI2_CHANNEL_0 | > > V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; > > } else { > > /* > > diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h > > index 44195ceeccca..c6626a22b394 100644 > > --- a/include/media/v4l2-mediabus.h > > +++ b/include/media/v4l2-mediabus.h > > @@ -67,20 +67,10 @@ > > #define V4L2_MBUS_DATA_ENABLE_LOW BIT(15) > > > > /* Serial flags */ > > -/* CSI-2 Virtual Channel identifiers. */ > > -#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4) > > -#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5) > > -#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6) > > -#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7) > > /* Clock non-continuous mode support. */ > > #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8) > > #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9) > > > > -#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | \ > > - V4L2_MBUS_CSI2_CHANNEL_1 | \ > > - V4L2_MBUS_CSI2_CHANNEL_2 | \ > > - V4L2_MBUS_CSI2_CHANNEL_3) > > - > > #define V4L2_MBUS_CSI2_MAX_DATA_LANES 8 > > > > /**
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 286f5017d9c3..3ff37a550810 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -786,7 +786,6 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd, cfg->type = V4L2_MBUS_CSI2_DPHY; cfg->bus.mipi_csi2.num_data_lanes = 1; cfg->bus.mipi_csi2.flags = - V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; } else { /* diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 44195ceeccca..c6626a22b394 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -67,20 +67,10 @@ #define V4L2_MBUS_DATA_ENABLE_LOW BIT(15) /* Serial flags */ -/* CSI-2 Virtual Channel identifiers. */ -#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4) -#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5) -#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6) -#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7) /* Clock non-continuous mode support. */ #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8) #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9) -#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | \ - V4L2_MBUS_CSI2_CHANNEL_1 | \ - V4L2_MBUS_CSI2_CHANNEL_2 | \ - V4L2_MBUS_CSI2_CHANNEL_3) - #define V4L2_MBUS_CSI2_MAX_DATA_LANES 8 /**
The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never read. Drop those flags. Virtual channel information should be conveyed through frame descriptors instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/i2c/adv7180.c | 1 - include/media/v4l2-mediabus.h | 10 ---------- 2 files changed, 11 deletions(-)