| Message ID | 20220215185936.15576-2-pvorel@suse.cz (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Herbert Xu |
| Headers | show |
| Series | vmx-crypto: Add missing dependencies | expand |
Hi, I kept CRYPTO_DEV_VMX_ENCRYPT in drivers/crypto/vmx/Kconfig, but maybe I should have moved it into drivers/crypto/Kconfig. It's not clear what is preferred. Kind regards, Petr
Hi Petr, Petr Vorel <pvorel@suse.cz> writes: > and remove CRYPTO_DEV_VMX, which looked redundant when only > CRYPTO_DEV_VMX_ENCRYPT used it. Also it forces CRYPTO_GHASH to be > builtin even CRYPTO_DEV_VMX_ENCRYPT was configured as module. I'm confused by the description. CRYPTO_DEV_VMX_ENCRYPT has been a tristate since ever? And thus, with CRYPTO_DEV_VMX_ENCRYPT=m, CRYPTO_GHASH=m would be possible as far as vmx is concerned? What this patch really does is to merge CRYPTO_DEV_VMX into CRYPTO_DEV_VMX_ENCRYPT AFAICS. These two seem indeed redundant to me, but for consistency with the other crypto drivers (e.g. bcm, ccree, ...), I'd rather keep CRYPTO_DEV_VMX and merge CRYPTO_DEV_VMX_ENCRYPT into it. > Update powerpc defconfigs and description in MAINTAINERS. The change to MAINTAINERS is completely unrelated? If anything, it had to come with a separate patch then. > > Signed-off-by: Petr Vorel <pvorel@suse.cz> > --- > new in v2 > > This might be a bit aggressive, but IMHO CRYPTO_DEV_VMX only complicated > things for nothing. I agree on the redundancy, but as said, CRYPTO_DEV_VMX_ENCRYPT should probably the one to get dropped in favor of CRYPTO_DEV_VMX. > But if you do *not* agree with removing it, I just add > select to drivers/crypto/vmx/Kconfig (which forces dependencies to be > always modules.) > > If it's ok for you to remove, please also check whether the description > is ok. get_maintainer.pl script has size limitation: > > $ ./scripts/get_maintainer.pl drivers/crypto/vmx/Kconfig > ... > linux-crypto@vger.kernel.org (open list:IBM Power VMX Cryptographic Acceleration Instru...) > > maybe the name should be shorter. > > Kind regards, > Petr > > MAINTAINERS | 2 +- > arch/powerpc/configs/powernv_defconfig | 2 +- > arch/powerpc/configs/ppc64_defconfig | 2 +- > arch/powerpc/configs/pseries_defconfig | 2 +- > drivers/crypto/Kconfig | 6 ------ > drivers/crypto/vmx/Kconfig | 4 ++-- > 6 files changed, 6 insertions(+), 12 deletions(-) If you were to drop CONFIG_CRYPTO_DEV_VMX (like it's implemented in this patch), then something had to be done about obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ in drivers/crypto/Makefile as well. > > diff --git a/MAINTAINERS b/MAINTAINERS > index ea3e6c914384..80e562579180 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9207,7 +9207,7 @@ L: target-devel@vger.kernel.org > S: Supported > F: drivers/scsi/ibmvscsi_tgt/ > > -IBM Power VMX Cryptographic instructions > +IBM Power VMX Cryptographic Acceleration Instructions Driver > M: Breno Leitão <leitao@debian.org> > M: Nayna Jain <nayna@linux.ibm.com> > M: Paulo Flabiano Smorigo <pfsmorigo@gmail.com> > diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig > index 49f49c263935..4b250d05dcdf 100644 > --- a/arch/powerpc/configs/powernv_defconfig > +++ b/arch/powerpc/configs/powernv_defconfig > @@ -337,7 +337,7 @@ CONFIG_CRYPTO_TEA=m > CONFIG_CRYPTO_TWOFISH=m > CONFIG_CRYPTO_LZO=m > CONFIG_CRYPTO_DEV_NX=y > -CONFIG_CRYPTO_DEV_VMX=y > +CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m > CONFIG_VIRTUALIZATION=y > CONFIG_KVM_BOOK3S_64=m > CONFIG_KVM_BOOK3S_64_HV=m > diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig > index c8b0e80d613b..ebd33b94debb 100644 > --- a/arch/powerpc/configs/ppc64_defconfig > +++ b/arch/powerpc/configs/ppc64_defconfig > @@ -355,7 +355,7 @@ CONFIG_CRYPTO_TWOFISH=m > CONFIG_CRYPTO_LZO=m > CONFIG_CRYPTO_DEV_NX=y > CONFIG_CRYPTO_DEV_NX_ENCRYPT=m > -CONFIG_CRYPTO_DEV_VMX=y > +CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m > CONFIG_PRINTK_TIME=y > CONFIG_PRINTK_CALLER=y > CONFIG_MAGIC_SYSRQ=y > diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig > index b571d084c148..304673817ef1 100644 > --- a/arch/powerpc/configs/pseries_defconfig > +++ b/arch/powerpc/configs/pseries_defconfig > @@ -315,7 +315,7 @@ CONFIG_CRYPTO_TWOFISH=m > CONFIG_CRYPTO_LZO=m > CONFIG_CRYPTO_DEV_NX=y > CONFIG_CRYPTO_DEV_NX_ENCRYPT=m > -CONFIG_CRYPTO_DEV_VMX=y > +CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m > CONFIG_VIRTUALIZATION=y > CONFIG_KVM_BOOK3S_64=m > CONFIG_KVM_BOOK3S_64_HV=m > diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig > index 4f705674f94f..956f956607a5 100644 > --- a/drivers/crypto/Kconfig > +++ b/drivers/crypto/Kconfig > @@ -761,12 +761,6 @@ config CRYPTO_DEV_QCOM_RNG > To compile this driver as a module, choose M here. The > module will be called qcom-rng. If unsure, say N. > > -config CRYPTO_DEV_VMX > - bool "Support for VMX cryptographic acceleration instructions" > - depends on PPC64 && VSX > - help > - Support for VMX cryptographic acceleration instructions. > - As said, I'd keep this one (while moving the GHASH dependency here) ... > source "drivers/crypto/vmx/Kconfig" ... and drop this one. Thanks, Nicolai > > config CRYPTO_DEV_IMGTEC_HASH > diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig > index c85fab7ef0bd..1a3808b719f3 100644 > --- a/drivers/crypto/vmx/Kconfig > +++ b/drivers/crypto/vmx/Kconfig > @@ -1,7 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0-only > config CRYPTO_DEV_VMX_ENCRYPT > - tristate "Encryption acceleration support on P8 CPU" > - depends on CRYPTO_DEV_VMX > + tristate "Power VMX cryptographic acceleration instructions driver" > + depends on PPC64 && VSX > select CRYPTO_GHASH > default m > help
Hi Nicolai, thanks for all your comments. > Hi Petr, > Petr Vorel <pvorel@suse.cz> writes: > > and remove CRYPTO_DEV_VMX, which looked redundant when only > > CRYPTO_DEV_VMX_ENCRYPT used it. Also it forces CRYPTO_GHASH to be > > builtin even CRYPTO_DEV_VMX_ENCRYPT was configured as module. > I'm confused by the description. CRYPTO_DEV_VMX_ENCRYPT has been a > tristate since ever? And thus, with CRYPTO_DEV_VMX_ENCRYPT=m, > CRYPTO_GHASH=m would be possible as far as vmx is concerned? I'm sorry, the description is wrong. I'm not kconfig expert and I verify it again, but I run into it when testing this with defconfig: $ make defconfig && scripts/config --enable CONFIG_KVM_GUEST --disable CRYPTO_MANAGER_DISABLE_TESTS --enable CONFIG_MODULE_SIG It somehow inherits CRYPTO_DEV_VMX=y. But I'll verify it again. > What this patch really does is to merge CRYPTO_DEV_VMX into > CRYPTO_DEV_VMX_ENCRYPT AFAICS. +1 This is a proper description. > These two seem indeed redundant to me, but for consistency with the > other crypto drivers (e.g. bcm, ccree, ...), I'd rather keep > CRYPTO_DEV_VMX and merge CRYPTO_DEV_VMX_ENCRYPT into it. I'm not sure myself, because some other modules also have Kconfig. $ ls -1 drivers/crypto/*/Kconfig drivers/crypto/allwinner/Kconfig drivers/crypto/amlogic/Kconfig drivers/crypto/caam/Kconfig drivers/crypto/ccp/Kconfig drivers/crypto/hisilicon/Kconfig drivers/crypto/chelsio/Kconfig drivers/crypto/keembay/Kconfig drivers/crypto/marvell/Kconfig drivers/crypto/nx/Kconfig drivers/crypto/qat/Kconfig drivers/crypto/stm32/Kconfig drivers/crypto/ux500/Kconfig drivers/crypto/virtio/Kconfig drivers/crypto/vmx/Kconfig Sure, some of them have many config options in Kconfig, but at least drivers/crypto/chelsio/Kconfig and drivers/crypto/virtio/Kconfig configure just the module. Given it's just these two, I should probably merge CRYPTO_DEV_VMX_ENCRYPT into CRYPTO_DEV_VMX as you suggest (also defconfig changes would not be needed). @Herbert, Nayna, Paulo, Breno: any preference of these. > > Update powerpc defconfigs and description in MAINTAINERS. > The change to MAINTAINERS is completely unrelated? If anything, it had > to come with a separate patch then. You're right, I was hesitating myself. > > Signed-off-by: Petr Vorel <pvorel@suse.cz> > > --- > > new in v2 > > This might be a bit aggressive, but IMHO CRYPTO_DEV_VMX only complicated > > things for nothing. > I agree on the redundancy, but as said, CRYPTO_DEV_VMX_ENCRYPT should > probably the one to get dropped in favor of CRYPTO_DEV_VMX. > > But if you do *not* agree with removing it, I just add > > select to drivers/crypto/vmx/Kconfig (which forces dependencies to be > > always modules.) > > If it's ok for you to remove, please also check whether the description > > is ok. get_maintainer.pl script has size limitation: > > $ ./scripts/get_maintainer.pl drivers/crypto/vmx/Kconfig > > ... > > linux-crypto@vger.kernel.org (open list:IBM Power VMX Cryptographic Acceleration Instru...) > > maybe the name should be shorter. > > Kind regards, > > Petr > > MAINTAINERS | 2 +- > > arch/powerpc/configs/powernv_defconfig | 2 +- > > arch/powerpc/configs/ppc64_defconfig | 2 +- > > arch/powerpc/configs/pseries_defconfig | 2 +- > > drivers/crypto/Kconfig | 6 ------ > > drivers/crypto/vmx/Kconfig | 4 ++-- > > 6 files changed, 6 insertions(+), 12 deletions(-) > If you were to drop CONFIG_CRYPTO_DEV_VMX (like it's implemented in this > patch), then something had to be done about > obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ > in drivers/crypto/Makefile as well. +1 (I obviously forget to amend). Kind regards, Petr ... > > +++ b/drivers/crypto/Kconfig > > @@ -761,12 +761,6 @@ config CRYPTO_DEV_QCOM_RNG > > To compile this driver as a module, choose M here. The > > module will be called qcom-rng. If unsure, say N. > > -config CRYPTO_DEV_VMX > > - bool "Support for VMX cryptographic acceleration instructions" > > - depends on PPC64 && VSX > > - help > > - Support for VMX cryptographic acceleration instructions. > > - > As said, I'd keep this one (while moving the GHASH dependency here) ... > > source "drivers/crypto/vmx/Kconfig" > ... and drop this one. > Thanks, > Nicolai
Hi, side notes about the subject (following private notes from Nicolai): I dared to use "crypto: vmx: " in subject, next version I'll use "crypto: vmx - " as it's used in crypto. Also continue the subject line into the rest of the commit message isn't probably wanted. Kind regards, Petr
diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c914384..80e562579180 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9207,7 +9207,7 @@ L: target-devel@vger.kernel.org S: Supported F: drivers/scsi/ibmvscsi_tgt/ -IBM Power VMX Cryptographic instructions +IBM Power VMX Cryptographic Acceleration Instructions Driver M: Breno Leitão <leitao@debian.org> M: Nayna Jain <nayna@linux.ibm.com> M: Paulo Flabiano Smorigo <pfsmorigo@gmail.com> diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig index 49f49c263935..4b250d05dcdf 100644 --- a/arch/powerpc/configs/powernv_defconfig +++ b/arch/powerpc/configs/powernv_defconfig @@ -337,7 +337,7 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_DEV_NX=y -CONFIG_CRYPTO_DEV_VMX=y +CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m CONFIG_VIRTUALIZATION=y CONFIG_KVM_BOOK3S_64=m CONFIG_KVM_BOOK3S_64_HV=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index c8b0e80d613b..ebd33b94debb 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -355,7 +355,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_DEV_NX=y CONFIG_CRYPTO_DEV_NX_ENCRYPT=m -CONFIG_CRYPTO_DEV_VMX=y +CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m CONFIG_PRINTK_TIME=y CONFIG_PRINTK_CALLER=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index b571d084c148..304673817ef1 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -315,7 +315,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_DEV_NX=y CONFIG_CRYPTO_DEV_NX_ENCRYPT=m -CONFIG_CRYPTO_DEV_VMX=y +CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m CONFIG_VIRTUALIZATION=y CONFIG_KVM_BOOK3S_64=m CONFIG_KVM_BOOK3S_64_HV=m diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 4f705674f94f..956f956607a5 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -761,12 +761,6 @@ config CRYPTO_DEV_QCOM_RNG To compile this driver as a module, choose M here. The module will be called qcom-rng. If unsure, say N. -config CRYPTO_DEV_VMX - bool "Support for VMX cryptographic acceleration instructions" - depends on PPC64 && VSX - help - Support for VMX cryptographic acceleration instructions. - source "drivers/crypto/vmx/Kconfig" config CRYPTO_DEV_IMGTEC_HASH diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig index c85fab7ef0bd..1a3808b719f3 100644 --- a/drivers/crypto/vmx/Kconfig +++ b/drivers/crypto/vmx/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config CRYPTO_DEV_VMX_ENCRYPT - tristate "Encryption acceleration support on P8 CPU" - depends on CRYPTO_DEV_VMX + tristate "Power VMX cryptographic acceleration instructions driver" + depends on PPC64 && VSX select CRYPTO_GHASH default m help
and remove CRYPTO_DEV_VMX, which looked redundant when only CRYPTO_DEV_VMX_ENCRYPT used it. Also it forces CRYPTO_GHASH to be builtin even CRYPTO_DEV_VMX_ENCRYPT was configured as module. Update powerpc defconfigs and description in MAINTAINERS. Signed-off-by: Petr Vorel <pvorel@suse.cz> --- new in v2 This might be a bit aggressive, but IMHO CRYPTO_DEV_VMX only complicated things for nothing. But if you do *not* agree with removing it, I just add select to drivers/crypto/vmx/Kconfig (which forces dependencies to be always modules.) If it's ok for you to remove, please also check whether the description is ok. get_maintainer.pl script has size limitation: $ ./scripts/get_maintainer.pl drivers/crypto/vmx/Kconfig ... linux-crypto@vger.kernel.org (open list:IBM Power VMX Cryptographic Acceleration Instru...) maybe the name should be shorter. Kind regards, Petr MAINTAINERS | 2 +- arch/powerpc/configs/powernv_defconfig | 2 +- arch/powerpc/configs/ppc64_defconfig | 2 +- arch/powerpc/configs/pseries_defconfig | 2 +- drivers/crypto/Kconfig | 6 ------ drivers/crypto/vmx/Kconfig | 4 ++-- 6 files changed, 6 insertions(+), 12 deletions(-)