| Message ID | 20220213130524.18748-1-hdegoede@redhat.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | usb/dwc3 / phy/tusb1210: Add TUSB1211 charger detection | expand |
On Sun, Feb 13, 2022 at 02:05:15PM +0100, Hans de Goede wrote: > Hi All, > > Here is v2 of the patchs-series to add support for USB charger-type > (SDP/DCP) detection using a tusb1210 phy connected to a dwc3 controller. > > Changes in v2: > [PATCH v2 9/9] phy: ti: tusb1210: Add charger detection: > - Add an online attribute to the registered power_supply class device, > otherwise upower thinks it is an extra system battery > - Add tusb1210_remove_charger_detect() function to properly unregister > the tusb->psy_nb notifier and to cancel tusb->chg_det_work > > v1 cover-letter: > > Some Android x86 tablets with a Bay Trail (BYT) SoC (with DWC3 UDC) > and a Crystal Cove PMIC, which does not support charger-detection, > rely on a TUSB1211 phy for charger-detection. > > This series adds support for this, it starts with some dwc3 bug-fixes > for issues hit while developing this, as well as adding support to > the dwc3 code to set a special property checked by the tusb1210 driver > to signal that it needs to enable charger-detection. > > The 2nd half of the series does some refactoring / fixes to the > tusb1210 driver and adds the charger-detection support. The first 4 are all in my usb trees now, thanks. greg k-h
On 13-02-22, 14:05, Hans de Goede wrote: > Hi All, > > Here is v2 of the patchs-series to add support for USB charger-type > (SDP/DCP) detection using a tusb1210 phy connected to a dwc3 controller. > > Changes in v2: > [PATCH v2 9/9] phy: ti: tusb1210: Add charger detection: > - Add an online attribute to the registered power_supply class device, > otherwise upower thinks it is an extra system battery > - Add tusb1210_remove_charger_detect() function to properly unregister > the tusb->psy_nb notifier and to cancel tusb->chg_det_work > > v1 cover-letter: > > Some Android x86 tablets with a Bay Trail (BYT) SoC (with DWC3 UDC) > and a Crystal Cove PMIC, which does not support charger-detection, > rely on a TUSB1211 phy for charger-detection. > > This series adds support for this, it starts with some dwc3 bug-fixes > for issues hit while developing this, as well as adding support to > the dwc3 code to set a special property checked by the tusb1210 driver > to signal that it needs to enable charger-detection. > > The 2nd half of the series does some refactoring / fixes to the > tusb1210 driver and adds the charger-detection support. Applied phy patches to phy-next, thanks
Hi All, Here is v2 of the patchs-series to add support for USB charger-type (SDP/DCP) detection using a tusb1210 phy connected to a dwc3 controller. Changes in v2: [PATCH v2 9/9] phy: ti: tusb1210: Add charger detection: - Add an online attribute to the registered power_supply class device, otherwise upower thinks it is an extra system battery - Add tusb1210_remove_charger_detect() function to properly unregister the tusb->psy_nb notifier and to cancel tusb->chg_det_work v1 cover-letter: Some Android x86 tablets with a Bay Trail (BYT) SoC (with DWC3 UDC) and a Crystal Cove PMIC, which does not support charger-detection, rely on a TUSB1211 phy for charger-detection. This series adds support for this, it starts with some dwc3 bug-fixes for issues hit while developing this, as well as adding support to the dwc3 code to set a special property checked by the tusb1210 driver to signal that it needs to enable charger-detection. The 2nd half of the series does some refactoring / fixes to the tusb1210 driver and adds the charger-detection support. Regards, Hans Hans de Goede (8): usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail usb: dwc3: pci: Fix Bay Trail phy GPIO mappings usb: dwc3: pci: Set the swnode from inside dwc3_pci_quirks() usb: dwc3: pci: Set "linux,phy_charger_detect" property on some Bay Trail boards usb: dwc3: pci: Also apply Bay Trail GPIO mappings to ulpi-device phy: ti: tusb1210: Improve ulpi_read()/_write() error checking phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from tusb1210_power_on() phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parameters Stephan Gerhold (1): phy: ti: tusb1210: Add charger detection drivers/phy/ti/phy-tusb1210.c | 439 ++++++++++++++++++++++++++++++++-- drivers/usb/dwc3/dwc3-pci.c | 60 ++++- 2 files changed, 467 insertions(+), 32 deletions(-)