| Message ID | 20220216134920.239989-3-caleb.connolly@linaro.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | iio: adc: introduce Qualcomm SPMI Round Robin ADC | expand |
Hi Caleb,
url: https://github.com/0day-ci/linux/commits/Caleb-Connolly/iio-adc-introduce-Qualcomm-SPMI-Round-Robin-ADC/20220216-215127
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-randconfig-m031-20220217 (https://download.01.org/0day-ci/archive/20220218/202202180412.YwXgb5WR-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 11.2.0
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
smatch warnings:
drivers/mfd/qcom-spmi-pmic.c:104 qcom_pmic_get() error: uninitialized symbol 'other_usid'.
vim +/other_usid +104 drivers/mfd/qcom-spmi-pmic.c
0e7c7a6e235e61 Caleb Connolly 2022-02-16 72 const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev)
0e7c7a6e235e61 Caleb Connolly 2022-02-16 73 {
0e7c7a6e235e61 Caleb Connolly 2022-02-16 74 struct spmi_device *sdev;
0e7c7a6e235e61 Caleb Connolly 2022-02-16 75 struct device_node *spmi_bus;
0e7c7a6e235e61 Caleb Connolly 2022-02-16 76 struct device_node *other_usid;
0e7c7a6e235e61 Caleb Connolly 2022-02-16 77 int function_parent_usid, ret;
0e7c7a6e235e61 Caleb Connolly 2022-02-16 78 u32 reg[2];
0e7c7a6e235e61 Caleb Connolly 2022-02-16 79
0e7c7a6e235e61 Caleb Connolly 2022-02-16 80 if (!of_match_device(pmic_spmi_id_table, dev->parent))
0e7c7a6e235e61 Caleb Connolly 2022-02-16 81 return ERR_PTR(-EINVAL);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 82
0e7c7a6e235e61 Caleb Connolly 2022-02-16 83 sdev = to_spmi_device(dev->parent);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 84 if (!sdev)
0e7c7a6e235e61 Caleb Connolly 2022-02-16 85 return ERR_PTR(-EINVAL);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 86
0e7c7a6e235e61 Caleb Connolly 2022-02-16 87 /*
0e7c7a6e235e61 Caleb Connolly 2022-02-16 88 * Quick return if the function device is already in the right
0e7c7a6e235e61 Caleb Connolly 2022-02-16 89 * USID
0e7c7a6e235e61 Caleb Connolly 2022-02-16 90 */
0e7c7a6e235e61 Caleb Connolly 2022-02-16 91 if (sdev->usid % 2 == 0)
0e7c7a6e235e61 Caleb Connolly 2022-02-16 92 return spmi_device_get_drvdata(sdev);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 93
0e7c7a6e235e61 Caleb Connolly 2022-02-16 94 function_parent_usid = sdev->usid;
0e7c7a6e235e61 Caleb Connolly 2022-02-16 95
0e7c7a6e235e61 Caleb Connolly 2022-02-16 96 /*
0e7c7a6e235e61 Caleb Connolly 2022-02-16 97 * Walk through the list of PMICs until we find the sibling USID.
0e7c7a6e235e61 Caleb Connolly 2022-02-16 98 * The goal is the find to previous sibling. Assuming there is no
0e7c7a6e235e61 Caleb Connolly 2022-02-16 99 * PMIC with more than 2 USIDs. We know that function_parent_usid
0e7c7a6e235e61 Caleb Connolly 2022-02-16 100 * is one greater than the base USID.
0e7c7a6e235e61 Caleb Connolly 2022-02-16 101 */
0e7c7a6e235e61 Caleb Connolly 2022-02-16 102 spmi_bus = of_get_parent(sdev->dev.parent->of_node);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 103 do {
0e7c7a6e235e61 Caleb Connolly 2022-02-16 @104 other_usid = of_get_next_child(spmi_bus, other_usid);
^^^^^^^^^^
Uninitialized.
0e7c7a6e235e61 Caleb Connolly 2022-02-16 105 ret = of_property_read_u32_array(other_usid, "reg", reg, 2);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 106 if (ret)
0e7c7a6e235e61 Caleb Connolly 2022-02-16 107 return ERR_PTR(ret);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 108 sdev = spmi_device_from_of(other_usid);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 109 if (sdev == NULL) {
0e7c7a6e235e61 Caleb Connolly 2022-02-16 110 /*
0e7c7a6e235e61 Caleb Connolly 2022-02-16 111 * If the base USID for this PMIC hasn't probed yet
0e7c7a6e235e61 Caleb Connolly 2022-02-16 112 * but the secondary USID has, then we need to defer
0e7c7a6e235e61 Caleb Connolly 2022-02-16 113 * the function driver so that it will attempt to
0e7c7a6e235e61 Caleb Connolly 2022-02-16 114 * probe again when the base USID is ready.
0e7c7a6e235e61 Caleb Connolly 2022-02-16 115 */
0e7c7a6e235e61 Caleb Connolly 2022-02-16 116 if (reg[0] == function_parent_usid - 1)
0e7c7a6e235e61 Caleb Connolly 2022-02-16 117 return ERR_PTR(-EPROBE_DEFER);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 118
0e7c7a6e235e61 Caleb Connolly 2022-02-16 119 continue;
0e7c7a6e235e61 Caleb Connolly 2022-02-16 120 }
0e7c7a6e235e61 Caleb Connolly 2022-02-16 121
0e7c7a6e235e61 Caleb Connolly 2022-02-16 122 if (reg[0] == function_parent_usid - 1)
0e7c7a6e235e61 Caleb Connolly 2022-02-16 123 return spmi_device_get_drvdata(sdev);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 124 } while (other_usid->sibling);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 125
0e7c7a6e235e61 Caleb Connolly 2022-02-16 126 return ERR_PTR(-ENODATA);
0e7c7a6e235e61 Caleb Connolly 2022-02-16 127 }
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
On Wed, 16 Feb 2022 13:49:13 +0000 Caleb Connolly <caleb.connolly@linaro.org> wrote: > Some PMIC functions such as the RRADC need to be aware of the PMIC > chip revision information to implement errata or otherwise adjust > behaviour, export the PMIC information to enable this. > > This is specifically required to enable the RRADC to adjust > coefficients based on which chip fab the PMIC was produced in, > this can vary per unique device and therefore has to be read at > runtime. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Hi Caleb, A few minor comments inline. Thanks, Jonathan > --- > drivers/mfd/qcom-spmi-pmic.c | 176 ++++++++++++++++++++---------- > include/soc/qcom/qcom-spmi-pmic.h | 60 ++++++++++ > 2 files changed, 179 insertions(+), 57 deletions(-) > create mode 100644 include/soc/qcom/qcom-spmi-pmic.h > > diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c > index 1cacc00aa6c9..5e656485cd55 100644 > --- a/drivers/mfd/qcom-spmi-pmic.c > +++ b/drivers/mfd/qcom-spmi-pmic.c > @@ -3,51 +3,26 @@ > * Copyright (c) 2014, The Linux Foundation. All rights reserved. > */ > > +#include <linux/device.h> > +#include <linux/errno.h> > +#include <linux/gfp.h> > #include <linux/kernel.h> > #include <linux/module.h> > +#include <linux/math.h> > +#include <linux/slab.h> > #include <linux/spmi.h> > +#include <linux/types.h> > #include <linux/regmap.h> > #include <linux/of_platform.h> > +#include <soc/qcom/qcom-spmi-pmic.h> All these new headers are a result of changes in this patch? Some clearly are, but device.h / errno.h? If you want to add missing ones that should always have been here it belongs in a different patch. > > #define PMIC_REV2 0x101 > #define PMIC_REV3 0x102 > #define PMIC_REV4 0x103 > #define PMIC_TYPE 0x104 > #define PMIC_SUBTYPE 0x105 > - Unrelated change. Please check through patches for this sort of noise. Whilst it doesn't matter in this particular case, it is good practice to ensure it isn't there to distract a reviewer from what matters. > #define PMIC_TYPE_VALUE 0x51 > > -#define COMMON_SUBTYPE 0x00 > -#define PM8941_SUBTYPE 0x01 > -#define PM8841_SUBTYPE 0x02 > -#define PM8019_SUBTYPE 0x03 > -#define PM8226_SUBTYPE 0x04 > -#define PM8110_SUBTYPE 0x05 > -#define PMA8084_SUBTYPE 0x06 > -#define PMI8962_SUBTYPE 0x07 > -#define PMD9635_SUBTYPE 0x08 > -#define PM8994_SUBTYPE 0x09 > -#define PMI8994_SUBTYPE 0x0a > -#define PM8916_SUBTYPE 0x0b > -#define PM8004_SUBTYPE 0x0c > -#define PM8909_SUBTYPE 0x0d > -#define PM8028_SUBTYPE 0x0e > -#define PM8901_SUBTYPE 0x0f > -#define PM8950_SUBTYPE 0x10 > -#define PMI8950_SUBTYPE 0x11 > -#define PM8998_SUBTYPE 0x14 > -#define PMI8998_SUBTYPE 0x15 > -#define PM8005_SUBTYPE 0x18 > -#define PM660L_SUBTYPE 0x1A > -#define PM660_SUBTYPE 0x1B > -#define PM8150_SUBTYPE 0x1E > -#define PM8150L_SUBTYPE 0x1f > -#define PM8150B_SUBTYPE 0x20 > -#define PMK8002_SUBTYPE 0x21 > -#define PM8009_SUBTYPE 0x24 > -#define PM8150C_SUBTYPE 0x26 > -#define SMB2351_SUBTYPE 0x29 > - > static const struct of_device_id pmic_spmi_id_table[] = { > { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, > { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, > @@ -81,42 +56,118 @@ static const struct of_device_id pmic_spmi_id_table[] = { > { } > }; > > -static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) > +/** Run kernel-doc script over this and fix all the errors + warnings. I'm fairly sure you will get some. > + * @brief Get a pointer to the base PMIC device > + * > + * @param dev the pmic function device > + * @return const struct qcom_spmi_pmic* > + * > + * A PMIC can be represented by multiple SPMI devices, but > + * only the base PMIC device will contain a reference to > + * the revision information. > + * > + * This function takes a pointer to a function device and > + * returns a pointer to the base PMIC device. > + */ > +const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) > +{ > + struct spmi_device *sdev; > + struct device_node *spmi_bus; > + struct device_node *other_usid; > + int function_parent_usid, ret; > + u32 reg[2]; > + > + if (!of_match_device(pmic_spmi_id_table, dev->parent)) > + return ERR_PTR(-EINVAL); > + > + sdev = to_spmi_device(dev->parent); > + if (!sdev) > + return ERR_PTR(-EINVAL); > + > + /* > + * Quick return if the function device is already in the right > + * USID > + */ > + if (sdev->usid % 2 == 0) > + return spmi_device_get_drvdata(sdev); > + > + function_parent_usid = sdev->usid; > + > + /* > + * Walk through the list of PMICs until we find the sibling USID. > + * The goal is the find to previous sibling. Assuming there is no > + * PMIC with more than 2 USIDs. We know that function_parent_usid > + * is one greater than the base USID. > + */ > + spmi_bus = of_get_parent(sdev->dev.parent->of_node); > + do { > + other_usid = of_get_next_child(spmi_bus, other_usid); > + ret = of_property_read_u32_array(other_usid, "reg", reg, 2); > + if (ret) > + return ERR_PTR(ret); > + sdev = spmi_device_from_of(other_usid); > + if (sdev == NULL) { > + /* > + * If the base USID for this PMIC hasn't probed yet > + * but the secondary USID has, then we need to defer > + * the function driver so that it will attempt to > + * probe again when the base USID is ready. > + */ > + if (reg[0] == function_parent_usid - 1) > + return ERR_PTR(-EPROBE_DEFER); > + > + continue; > + } > + > + if (reg[0] == function_parent_usid - 1) > + return spmi_device_get_drvdata(sdev); > + } while (other_usid->sibling); > + > + return ERR_PTR(-ENODATA); > +} > +EXPORT_SYMBOL(qcom_pmic_get); > + > +static inline void pmic_print_info(struct device *dev, struct qcom_spmi_pmic *pmic) > +{ > + dev_info(dev, "%x: %s v%d.%d\n", > + pmic->subtype, pmic->name, pmic->major, pmic->minor); > +} > + > +static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, > + struct qcom_spmi_pmic *pmic) > { > - unsigned int rev2, minor, major, type, subtype; > - const char *name = "unknown"; > int ret, i; > > - ret = regmap_read(map, PMIC_TYPE, &type); > + ret = regmap_read(map, PMIC_TYPE, &pmic->type); > if (ret < 0) > - return; > + return ret; > > - if (type != PMIC_TYPE_VALUE) > - return; > + if (pmic->type != PMIC_TYPE_VALUE) > + return ret; > > - ret = regmap_read(map, PMIC_SUBTYPE, &subtype); > + ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); > if (ret < 0) > - return; > + return ret; > > for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { > - if (subtype == (unsigned long)pmic_spmi_id_table[i].data) > + if (pmic->subtype == (unsigned long)pmic_spmi_id_table[i].data) > break; > } > > if (i != ARRAY_SIZE(pmic_spmi_id_table)) > - name = pmic_spmi_id_table[i].compatible; > + pmic->name = devm_kstrdup_const(dev, pmic_spmi_id_table[i].compatible, GFP_KERNEL); > > - ret = regmap_read(map, PMIC_REV2, &rev2); > + ret = regmap_read(map, PMIC_REV2, &pmic->rev2); > if (ret < 0) > - return; > + return ret; > > - ret = regmap_read(map, PMIC_REV3, &minor); > + ret = regmap_read(map, PMIC_REV3, &pmic->minor); > if (ret < 0) > - return; > + return ret; > > - ret = regmap_read(map, PMIC_REV4, &major); > + ret = regmap_read(map, PMIC_REV4, &pmic->major); > if (ret < 0) > - return; > + return ret; > > /* > * In early versions of PM8941 and PM8226, the major revision number > @@ -124,14 +175,14 @@ static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) > * Increment the major revision number here if the chip is an early > * version of PM8941 or PM8226. > */ > - if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && > - major < 0x02) > - major++; > + if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && > + pmic->major < 0x02) > + pmic->major++; > > - if (subtype == PM8110_SUBTYPE) > - minor = rev2; > + if (pmic->subtype == PM8110_SUBTYPE) > + pmic->minor = pmic->rev2; > > - dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); Why remove the dev_dbg? > + return 0; > } > > static const struct regmap_config spmi_regmap_config = { > @@ -144,14 +195,25 @@ static const struct regmap_config spmi_regmap_config = { > static int pmic_spmi_probe(struct spmi_device *sdev) > { > struct regmap *regmap; > + struct qcom_spmi_pmic *pmic; > + int ret; > > regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); > if (IS_ERR(regmap)) > return PTR_ERR(regmap); > > + pmic = devm_kzalloc(&sdev->dev, sizeof(*pmic), GFP_KERNEL); > + if (!pmic) > + return -ENOMEM; > + > /* Only the first slave id for a PMIC contains this information */ > - if (sdev->usid % 2 == 0) > - pmic_spmi_show_revid(regmap, &sdev->dev); > + if (sdev->usid % 2 == 0) { > + ret = pmic_spmi_load_revid(regmap, &sdev->dev, pmic); > + if (ret < 0) > + return ret; > + spmi_device_set_drvdata(sdev, pmic); > + pmic_print_info(&sdev->dev, pmic); > + } > > return devm_of_platform_populate(&sdev->dev); > }
On 19/02/2022 18:27, Jonathan Cameron wrote: > On Wed, 16 Feb 2022 13:49:13 +0000 > Caleb Connolly <caleb.connolly@linaro.org> wrote: > >> Some PMIC functions such as the RRADC need to be aware of the PMIC >> chip revision information to implement errata or otherwise adjust >> behaviour, export the PMIC information to enable this. >> >> This is specifically required to enable the RRADC to adjust >> coefficients based on which chip fab the PMIC was produced in, >> this can vary per unique device and therefore has to be read at >> runtime. >> >> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Hi Jonathan, > Hi Caleb, > > A few minor comments inline. > > Thanks, > > Jonathan > >> --- >> drivers/mfd/qcom-spmi-pmic.c | 176 ++++++++++++++++++++---------- >> include/soc/qcom/qcom-spmi-pmic.h | 60 ++++++++++ >> 2 files changed, 179 insertions(+), 57 deletions(-) >> create mode 100644 include/soc/qcom/qcom-spmi-pmic.h >> >> diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c >> index 1cacc00aa6c9..5e656485cd55 100644 >> --- a/drivers/mfd/qcom-spmi-pmic.c >> +++ b/drivers/mfd/qcom-spmi-pmic.c >> @@ -3,51 +3,26 @@ >> * Copyright (c) 2014, The Linux Foundation. All rights reserved. >> */ >> >> +#include <linux/device.h> >> +#include <linux/errno.h> >> +#include <linux/gfp.h> >> #include <linux/kernel.h> >> #include <linux/module.h> >> +#include <linux/math.h> >> +#include <linux/slab.h> >> #include <linux/spmi.h> >> +#include <linux/types.h> >> #include <linux/regmap.h> >> #include <linux/of_platform.h> >> +#include <soc/qcom/qcom-spmi-pmic.h> > > All these new headers are a result of changes in this patch? > Some clearly are, but device.h / errno.h? device.h is required for devm_kzalloc() and errno.h for EPROBE_DEFER. However slab.h and math.h aren't needed, they were from development, I'll drop them in the next revision. > > If you want to add missing ones that should always have been here > it belongs in a different patch. > >> >> #define PMIC_REV2 0x101 >> #define PMIC_REV3 0x102 >> #define PMIC_REV4 0x103 >> #define PMIC_TYPE 0x104 >> #define PMIC_SUBTYPE 0x105 >> - > > Unrelated change. Please check through patches for this sort of noise. > Whilst it doesn't matter in this particular case, it is good practice to > ensure it isn't there to distract a reviewer from what matters. ack > >> #define PMIC_TYPE_VALUE 0x51 >> >> -#define COMMON_SUBTYPE 0x00 >> -#define PM8941_SUBTYPE 0x01 >> -#define PM8841_SUBTYPE 0x02 >> -#define PM8019_SUBTYPE 0x03 >> -#define PM8226_SUBTYPE 0x04 >> -#define PM8110_SUBTYPE 0x05 >> -#define PMA8084_SUBTYPE 0x06 >> -#define PMI8962_SUBTYPE 0x07 >> -#define PMD9635_SUBTYPE 0x08 >> -#define PM8994_SUBTYPE 0x09 >> -#define PMI8994_SUBTYPE 0x0a >> -#define PM8916_SUBTYPE 0x0b >> -#define PM8004_SUBTYPE 0x0c >> -#define PM8909_SUBTYPE 0x0d >> -#define PM8028_SUBTYPE 0x0e >> -#define PM8901_SUBTYPE 0x0f >> -#define PM8950_SUBTYPE 0x10 >> -#define PMI8950_SUBTYPE 0x11 >> -#define PM8998_SUBTYPE 0x14 >> -#define PMI8998_SUBTYPE 0x15 >> -#define PM8005_SUBTYPE 0x18 >> -#define PM660L_SUBTYPE 0x1A >> -#define PM660_SUBTYPE 0x1B >> -#define PM8150_SUBTYPE 0x1E >> -#define PM8150L_SUBTYPE 0x1f >> -#define PM8150B_SUBTYPE 0x20 >> -#define PMK8002_SUBTYPE 0x21 >> -#define PM8009_SUBTYPE 0x24 >> -#define PM8150C_SUBTYPE 0x26 >> -#define SMB2351_SUBTYPE 0x29 >> - >> static const struct of_device_id pmic_spmi_id_table[] = { >> { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, >> { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, >> @@ -81,42 +56,118 @@ static const struct of_device_id pmic_spmi_id_table[] = { >> { } >> }; >> >> -static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) >> +/** > > Run kernel-doc script over this and fix all the errors + warnings. > I'm fairly sure you will get some. ack, yeah this is not good kernel-doc, I'll get it sorted for the next revision, thanks. > >> + * @brief Get a pointer to the base PMIC device >> + * >> + * @param dev the pmic function device >> + * @return const struct qcom_spmi_pmic* >> + * >> + * A PMIC can be represented by multiple SPMI devices, but >> + * only the base PMIC device will contain a reference to >> + * the revision information. >> + * >> + * This function takes a pointer to a function device and >> + * returns a pointer to the base PMIC device. >> + */ >> +const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) >> +{ >> + struct spmi_device *sdev; >> + struct device_node *spmi_bus; >> + struct device_node *other_usid; >> + int function_parent_usid, ret; >> + u32 reg[2]; >> + >> + if (!of_match_device(pmic_spmi_id_table, dev->parent)) >> + return ERR_PTR(-EINVAL); >> + >> + sdev = to_spmi_device(dev->parent); >> + if (!sdev) >> + return ERR_PTR(-EINVAL); >> + >> + /* >> + * Quick return if the function device is already in the right >> + * USID >> + */ >> + if (sdev->usid % 2 == 0) >> + return spmi_device_get_drvdata(sdev); >> + >> + function_parent_usid = sdev->usid; >> + >> + /* >> + * Walk through the list of PMICs until we find the sibling USID. >> + * The goal is the find to previous sibling. Assuming there is no >> + * PMIC with more than 2 USIDs. We know that function_parent_usid >> + * is one greater than the base USID. >> + */ >> + spmi_bus = of_get_parent(sdev->dev.parent->of_node); >> + do { >> + other_usid = of_get_next_child(spmi_bus, other_usid); >> + ret = of_property_read_u32_array(other_usid, "reg", reg, 2); >> + if (ret) >> + return ERR_PTR(ret); >> + sdev = spmi_device_from_of(other_usid); >> + if (sdev == NULL) { >> + /* >> + * If the base USID for this PMIC hasn't probed yet >> + * but the secondary USID has, then we need to defer >> + * the function driver so that it will attempt to >> + * probe again when the base USID is ready. >> + */ >> + if (reg[0] == function_parent_usid - 1) >> + return ERR_PTR(-EPROBE_DEFER); >> + >> + continue; >> + } >> + >> + if (reg[0] == function_parent_usid - 1) >> + return spmi_device_get_drvdata(sdev); >> + } while (other_usid->sibling); >> + >> + return ERR_PTR(-ENODATA); >> +} >> +EXPORT_SYMBOL(qcom_pmic_get); >> + >> +static inline void pmic_print_info(struct device *dev, struct qcom_spmi_pmic *pmic) >> +{ >> + dev_info(dev, "%x: %s v%d.%d\n", >> + pmic->subtype, pmic->name, pmic->major, pmic->minor); >> +} >> + >> +static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, >> + struct qcom_spmi_pmic *pmic) >> { >> - unsigned int rev2, minor, major, type, subtype; >> - const char *name = "unknown"; >> int ret, i; >> >> - ret = regmap_read(map, PMIC_TYPE, &type); >> + ret = regmap_read(map, PMIC_TYPE, &pmic->type); >> if (ret < 0) >> - return; >> + return ret; >> >> - if (type != PMIC_TYPE_VALUE) >> - return; >> + if (pmic->type != PMIC_TYPE_VALUE) >> + return ret; >> >> - ret = regmap_read(map, PMIC_SUBTYPE, &subtype); >> + ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); >> if (ret < 0) >> - return; >> + return ret; >> >> for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { >> - if (subtype == (unsigned long)pmic_spmi_id_table[i].data) >> + if (pmic->subtype == (unsigned long)pmic_spmi_id_table[i].data) >> break; >> } >> >> if (i != ARRAY_SIZE(pmic_spmi_id_table)) >> - name = pmic_spmi_id_table[i].compatible; >> + pmic->name = devm_kstrdup_const(dev, pmic_spmi_id_table[i].compatible, GFP_KERNEL); >> >> - ret = regmap_read(map, PMIC_REV2, &rev2); >> + ret = regmap_read(map, PMIC_REV2, &pmic->rev2); >> if (ret < 0) >> - return; >> + return ret; >> >> - ret = regmap_read(map, PMIC_REV3, &minor); >> + ret = regmap_read(map, PMIC_REV3, &pmic->minor); >> if (ret < 0) >> - return; >> + return ret; >> >> - ret = regmap_read(map, PMIC_REV4, &major); >> + ret = regmap_read(map, PMIC_REV4, &pmic->major); >> if (ret < 0) >> - return; >> + return ret; >> >> /* >> * In early versions of PM8941 and PM8226, the major revision number >> @@ -124,14 +175,14 @@ static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) >> * Increment the major revision number here if the chip is an early >> * version of PM8941 or PM8226. >> */ >> - if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && >> - major < 0x02) >> - major++; >> + if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && >> + pmic->major < 0x02) >> + pmic->major++; >> >> - if (subtype == PM8110_SUBTYPE) >> - minor = rev2; >> + if (pmic->subtype == PM8110_SUBTYPE) >> + pmic->minor = pmic->rev2; >> >> - dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); > > Why remove the dev_dbg? I moved the print to be after the call to this function instead of in it - this function previously just fetched and printed the PMIC revision information when debug printing was enabled, I'm changing it to instead just fetch the information and populate the new struct qcom_spmi_pmic, I renamed the function to match the new behaviour too. So it seemed sensible to remove the print behaviour and instead move it outside the function (see the call to pmic_print_info() below). I also inadvertently upgraded it to a dev_info() instead which I don't think upstream are too keen on. I'll drop it back to dev_dbg in the next revision. > >> + return 0; >> } >> >> static const struct regmap_config spmi_regmap_config = { >> @@ -144,14 +195,25 @@ static const struct regmap_config spmi_regmap_config = { >> static int pmic_spmi_probe(struct spmi_device *sdev) >> { >> struct regmap *regmap; >> + struct qcom_spmi_pmic *pmic; >> + int ret; >> >> regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); >> if (IS_ERR(regmap)) >> return PTR_ERR(regmap); >> >> + pmic = devm_kzalloc(&sdev->dev, sizeof(*pmic), GFP_KERNEL); >> + if (!pmic) >> + return -ENOMEM; >> + >> /* Only the first slave id for a PMIC contains this information */ >> - if (sdev->usid % 2 == 0) >> - pmic_spmi_show_revid(regmap, &sdev->dev); >> + if (sdev->usid % 2 == 0) { >> + ret = pmic_spmi_load_revid(regmap, &sdev->dev, pmic); >> + if (ret < 0) >> + return ret; >> + spmi_device_set_drvdata(sdev, pmic); >> + pmic_print_info(&sdev->dev, pmic); >> + } >> >> return devm_of_platform_populate(&sdev->dev); >> } >
On Mon, 21 Feb 2022 17:19:51 +0000 Caleb Connolly <caleb.connolly@linaro.org> wrote: > On 19/02/2022 18:27, Jonathan Cameron wrote: > > On Wed, 16 Feb 2022 13:49:13 +0000 > > Caleb Connolly <caleb.connolly@linaro.org> wrote: > > > >> Some PMIC functions such as the RRADC need to be aware of the PMIC > >> chip revision information to implement errata or otherwise adjust > >> behaviour, export the PMIC information to enable this. > >> > >> This is specifically required to enable the RRADC to adjust > >> coefficients based on which chip fab the PMIC was produced in, > >> this can vary per unique device and therefore has to be read at > >> runtime. > >> > >> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > Hi Jonathan, > > Hi Caleb, > > > > A few minor comments inline. > > > > Thanks, > > > > Jonathan > > > >> --- > >> drivers/mfd/qcom-spmi-pmic.c | 176 ++++++++++++++++++++---------- > >> include/soc/qcom/qcom-spmi-pmic.h | 60 ++++++++++ > >> 2 files changed, 179 insertions(+), 57 deletions(-) > >> create mode 100644 include/soc/qcom/qcom-spmi-pmic.h > >> > >> diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c > >> index 1cacc00aa6c9..5e656485cd55 100644 > >> --- a/drivers/mfd/qcom-spmi-pmic.c > >> +++ b/drivers/mfd/qcom-spmi-pmic.c > >> @@ -3,51 +3,26 @@ > >> * Copyright (c) 2014, The Linux Foundation. All rights reserved. > >> */ > >> > >> +#include <linux/device.h> > >> +#include <linux/errno.h> > >> +#include <linux/gfp.h> > >> #include <linux/kernel.h> > >> #include <linux/module.h> > >> +#include <linux/math.h> > >> +#include <linux/slab.h> > >> #include <linux/spmi.h> > >> +#include <linux/types.h> > >> #include <linux/regmap.h> > >> #include <linux/of_platform.h> > >> +#include <soc/qcom/qcom-spmi-pmic.h> > > > > All these new headers are a result of changes in this patch? > > Some clearly are, but device.h / errno.h? > device.h is required for devm_kzalloc() and errno.h for EPROBE_DEFER. oops. Clearly I was having an unobservant day! > > However slab.h and math.h aren't needed, they were from development, > I'll drop them in the next revision. Great :) > > > > If you want to add missing ones that should always have been here > > it belongs in a different patch. > > > >> > >> #define PMIC_REV2 0x101 > >> #define PMIC_REV3 0x102 > >> #define PMIC_REV4 0x103 > >> #define PMIC_TYPE 0x104 > >> #define PMIC_SUBTYPE 0x105 > >> - > > > > Unrelated change. Please check through patches for this sort of noise. > > Whilst it doesn't matter in this particular case, it is good practice to > > ensure it isn't there to distract a reviewer from what matters. > ack > > > >> #define PMIC_TYPE_VALUE 0x51 > >> > >> -#define COMMON_SUBTYPE 0x00 > >> -#define PM8941_SUBTYPE 0x01 > >> -#define PM8841_SUBTYPE 0x02 > >> -#define PM8019_SUBTYPE 0x03 > >> -#define PM8226_SUBTYPE 0x04 > >> -#define PM8110_SUBTYPE 0x05 > >> -#define PMA8084_SUBTYPE 0x06 > >> -#define PMI8962_SUBTYPE 0x07 > >> -#define PMD9635_SUBTYPE 0x08 > >> -#define PM8994_SUBTYPE 0x09 > >> -#define PMI8994_SUBTYPE 0x0a > >> -#define PM8916_SUBTYPE 0x0b > >> -#define PM8004_SUBTYPE 0x0c > >> -#define PM8909_SUBTYPE 0x0d > >> -#define PM8028_SUBTYPE 0x0e > >> -#define PM8901_SUBTYPE 0x0f > >> -#define PM8950_SUBTYPE 0x10 > >> -#define PMI8950_SUBTYPE 0x11 > >> -#define PM8998_SUBTYPE 0x14 > >> -#define PMI8998_SUBTYPE 0x15 > >> -#define PM8005_SUBTYPE 0x18 > >> -#define PM660L_SUBTYPE 0x1A > >> -#define PM660_SUBTYPE 0x1B > >> -#define PM8150_SUBTYPE 0x1E > >> -#define PM8150L_SUBTYPE 0x1f > >> -#define PM8150B_SUBTYPE 0x20 > >> -#define PMK8002_SUBTYPE 0x21 > >> -#define PM8009_SUBTYPE 0x24 > >> -#define PM8150C_SUBTYPE 0x26 > >> -#define SMB2351_SUBTYPE 0x29 > >> - > >> static const struct of_device_id pmic_spmi_id_table[] = { > >> { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, > >> { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, > >> @@ -81,42 +56,118 @@ static const struct of_device_id pmic_spmi_id_table[] = { > >> { } > >> }; > >> > >> -static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) > >> +/** > > > > Run kernel-doc script over this and fix all the errors + warnings. > > I'm fairly sure you will get some. > ack, yeah this is not good kernel-doc, I'll get it sorted for the next revision, thanks. > > > >> + * @brief Get a pointer to the base PMIC device > >> + * > >> + * @param dev the pmic function device > >> + * @return const struct qcom_spmi_pmic* > >> + * > >> + * A PMIC can be represented by multiple SPMI devices, but > >> + * only the base PMIC device will contain a reference to > >> + * the revision information. > >> + * > >> + * This function takes a pointer to a function device and > >> + * returns a pointer to the base PMIC device. > >> + */ > >> +const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) > >> +{ > >> + struct spmi_device *sdev; > >> + struct device_node *spmi_bus; > >> + struct device_node *other_usid; > >> + int function_parent_usid, ret; > >> + u32 reg[2]; > >> + > >> + if (!of_match_device(pmic_spmi_id_table, dev->parent)) > >> + return ERR_PTR(-EINVAL); > >> + > >> + sdev = to_spmi_device(dev->parent); > >> + if (!sdev) > >> + return ERR_PTR(-EINVAL); > >> + > >> + /* > >> + * Quick return if the function device is already in the right > >> + * USID > >> + */ > >> + if (sdev->usid % 2 == 0) > >> + return spmi_device_get_drvdata(sdev); > >> + > >> + function_parent_usid = sdev->usid; > >> + > >> + /* > >> + * Walk through the list of PMICs until we find the sibling USID. > >> + * The goal is the find to previous sibling. Assuming there is no > >> + * PMIC with more than 2 USIDs. We know that function_parent_usid > >> + * is one greater than the base USID. > >> + */ > >> + spmi_bus = of_get_parent(sdev->dev.parent->of_node); > >> + do { > >> + other_usid = of_get_next_child(spmi_bus, other_usid); > >> + ret = of_property_read_u32_array(other_usid, "reg", reg, 2); > >> + if (ret) > >> + return ERR_PTR(ret); > >> + sdev = spmi_device_from_of(other_usid); > >> + if (sdev == NULL) { > >> + /* > >> + * If the base USID for this PMIC hasn't probed yet > >> + * but the secondary USID has, then we need to defer > >> + * the function driver so that it will attempt to > >> + * probe again when the base USID is ready. > >> + */ > >> + if (reg[0] == function_parent_usid - 1) > >> + return ERR_PTR(-EPROBE_DEFER); > >> + > >> + continue; > >> + } > >> + > >> + if (reg[0] == function_parent_usid - 1) > >> + return spmi_device_get_drvdata(sdev); > >> + } while (other_usid->sibling); > >> + > >> + return ERR_PTR(-ENODATA); > >> +} > >> +EXPORT_SYMBOL(qcom_pmic_get); > >> + > >> +static inline void pmic_print_info(struct device *dev, struct qcom_spmi_pmic *pmic) > >> +{ > >> + dev_info(dev, "%x: %s v%d.%d\n", > >> + pmic->subtype, pmic->name, pmic->major, pmic->minor); > >> +} > >> + > >> +static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, > >> + struct qcom_spmi_pmic *pmic) > >> { > >> - unsigned int rev2, minor, major, type, subtype; > >> - const char *name = "unknown"; > >> int ret, i; > >> > >> - ret = regmap_read(map, PMIC_TYPE, &type); > >> + ret = regmap_read(map, PMIC_TYPE, &pmic->type); > >> if (ret < 0) > >> - return; > >> + return ret; > >> > >> - if (type != PMIC_TYPE_VALUE) > >> - return; > >> + if (pmic->type != PMIC_TYPE_VALUE) > >> + return ret; > >> > >> - ret = regmap_read(map, PMIC_SUBTYPE, &subtype); > >> + ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); > >> if (ret < 0) > >> - return; > >> + return ret; > >> > >> for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { > >> - if (subtype == (unsigned long)pmic_spmi_id_table[i].data) > >> + if (pmic->subtype == (unsigned long)pmic_spmi_id_table[i].data) > >> break; > >> } > >> > >> if (i != ARRAY_SIZE(pmic_spmi_id_table)) > >> - name = pmic_spmi_id_table[i].compatible; > >> + pmic->name = devm_kstrdup_const(dev, pmic_spmi_id_table[i].compatible, GFP_KERNEL); > >> > >> - ret = regmap_read(map, PMIC_REV2, &rev2); > >> + ret = regmap_read(map, PMIC_REV2, &pmic->rev2); > >> if (ret < 0) > >> - return; > >> + return ret; > >> > >> - ret = regmap_read(map, PMIC_REV3, &minor); > >> + ret = regmap_read(map, PMIC_REV3, &pmic->minor); > >> if (ret < 0) > >> - return; > >> + return ret; > >> > >> - ret = regmap_read(map, PMIC_REV4, &major); > >> + ret = regmap_read(map, PMIC_REV4, &pmic->major); > >> if (ret < 0) > >> - return; > >> + return ret; > >> > >> /* > >> * In early versions of PM8941 and PM8226, the major revision number > >> @@ -124,14 +175,14 @@ static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) > >> * Increment the major revision number here if the chip is an early > >> * version of PM8941 or PM8226. > >> */ > >> - if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && > >> - major < 0x02) > >> - major++; > >> + if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && > >> + pmic->major < 0x02) > >> + pmic->major++; > >> > >> - if (subtype == PM8110_SUBTYPE) > >> - minor = rev2; > >> + if (pmic->subtype == PM8110_SUBTYPE) > >> + pmic->minor = pmic->rev2; > >> > >> - dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); > > > > Why remove the dev_dbg? > I moved the print to be after the call to this function instead of in it - this function previously > just fetched and printed the PMIC revision information when debug printing was enabled, I'm changing > it to instead just fetch the information and populate the new struct qcom_spmi_pmic, I renamed the > function to match the new behaviour too. So it seemed sensible to remove the print behaviour and > instead move it outside the function (see the call to pmic_print_info() below). Ah. Unobservant again :) Thanks, for pointing me in the right direction. Jonathan > > I also inadvertently upgraded it to a dev_info() instead which I don't think > upstream are too keen on. I'll drop it back to dev_dbg in the next revision. > > > >> + return 0; > >> } > >> > >> static const struct regmap_config spmi_regmap_config = { > >> @@ -144,14 +195,25 @@ static const struct regmap_config spmi_regmap_config = { > >> static int pmic_spmi_probe(struct spmi_device *sdev) > >> { > >> struct regmap *regmap; > >> + struct qcom_spmi_pmic *pmic; > >> + int ret; > >> > >> regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); > >> if (IS_ERR(regmap)) > >> return PTR_ERR(regmap); > >> > >> + pmic = devm_kzalloc(&sdev->dev, sizeof(*pmic), GFP_KERNEL); > >> + if (!pmic) > >> + return -ENOMEM; > >> + > >> /* Only the first slave id for a PMIC contains this information */ > >> - if (sdev->usid % 2 == 0) > >> - pmic_spmi_show_revid(regmap, &sdev->dev); > >> + if (sdev->usid % 2 == 0) { > >> + ret = pmic_spmi_load_revid(regmap, &sdev->dev, pmic); > >> + if (ret < 0) > >> + return ret; > >> + spmi_device_set_drvdata(sdev, pmic); > >> + pmic_print_info(&sdev->dev, pmic); > >> + } > >> > >> return devm_of_platform_populate(&sdev->dev); > >> } > > >
diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index 1cacc00aa6c9..5e656485cd55 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -3,51 +3,26 @@ * Copyright (c) 2014, The Linux Foundation. All rights reserved. */ +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/math.h> +#include <linux/slab.h> #include <linux/spmi.h> +#include <linux/types.h> #include <linux/regmap.h> #include <linux/of_platform.h> +#include <soc/qcom/qcom-spmi-pmic.h> #define PMIC_REV2 0x101 #define PMIC_REV3 0x102 #define PMIC_REV4 0x103 #define PMIC_TYPE 0x104 #define PMIC_SUBTYPE 0x105 - #define PMIC_TYPE_VALUE 0x51 -#define COMMON_SUBTYPE 0x00 -#define PM8941_SUBTYPE 0x01 -#define PM8841_SUBTYPE 0x02 -#define PM8019_SUBTYPE 0x03 -#define PM8226_SUBTYPE 0x04 -#define PM8110_SUBTYPE 0x05 -#define PMA8084_SUBTYPE 0x06 -#define PMI8962_SUBTYPE 0x07 -#define PMD9635_SUBTYPE 0x08 -#define PM8994_SUBTYPE 0x09 -#define PMI8994_SUBTYPE 0x0a -#define PM8916_SUBTYPE 0x0b -#define PM8004_SUBTYPE 0x0c -#define PM8909_SUBTYPE 0x0d -#define PM8028_SUBTYPE 0x0e -#define PM8901_SUBTYPE 0x0f -#define PM8950_SUBTYPE 0x10 -#define PMI8950_SUBTYPE 0x11 -#define PM8998_SUBTYPE 0x14 -#define PMI8998_SUBTYPE 0x15 -#define PM8005_SUBTYPE 0x18 -#define PM660L_SUBTYPE 0x1A -#define PM660_SUBTYPE 0x1B -#define PM8150_SUBTYPE 0x1E -#define PM8150L_SUBTYPE 0x1f -#define PM8150B_SUBTYPE 0x20 -#define PMK8002_SUBTYPE 0x21 -#define PM8009_SUBTYPE 0x24 -#define PM8150C_SUBTYPE 0x26 -#define SMB2351_SUBTYPE 0x29 - static const struct of_device_id pmic_spmi_id_table[] = { { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, @@ -81,42 +56,118 @@ static const struct of_device_id pmic_spmi_id_table[] = { { } }; -static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) +/** + * @brief Get a pointer to the base PMIC device + * + * @param dev the pmic function device + * @return const struct qcom_spmi_pmic* + * + * A PMIC can be represented by multiple SPMI devices, but + * only the base PMIC device will contain a reference to + * the revision information. + * + * This function takes a pointer to a function device and + * returns a pointer to the base PMIC device. + */ +const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) +{ + struct spmi_device *sdev; + struct device_node *spmi_bus; + struct device_node *other_usid; + int function_parent_usid, ret; + u32 reg[2]; + + if (!of_match_device(pmic_spmi_id_table, dev->parent)) + return ERR_PTR(-EINVAL); + + sdev = to_spmi_device(dev->parent); + if (!sdev) + return ERR_PTR(-EINVAL); + + /* + * Quick return if the function device is already in the right + * USID + */ + if (sdev->usid % 2 == 0) + return spmi_device_get_drvdata(sdev); + + function_parent_usid = sdev->usid; + + /* + * Walk through the list of PMICs until we find the sibling USID. + * The goal is the find to previous sibling. Assuming there is no + * PMIC with more than 2 USIDs. We know that function_parent_usid + * is one greater than the base USID. + */ + spmi_bus = of_get_parent(sdev->dev.parent->of_node); + do { + other_usid = of_get_next_child(spmi_bus, other_usid); + ret = of_property_read_u32_array(other_usid, "reg", reg, 2); + if (ret) + return ERR_PTR(ret); + sdev = spmi_device_from_of(other_usid); + if (sdev == NULL) { + /* + * If the base USID for this PMIC hasn't probed yet + * but the secondary USID has, then we need to defer + * the function driver so that it will attempt to + * probe again when the base USID is ready. + */ + if (reg[0] == function_parent_usid - 1) + return ERR_PTR(-EPROBE_DEFER); + + continue; + } + + if (reg[0] == function_parent_usid - 1) + return spmi_device_get_drvdata(sdev); + } while (other_usid->sibling); + + return ERR_PTR(-ENODATA); +} +EXPORT_SYMBOL(qcom_pmic_get); + +static inline void pmic_print_info(struct device *dev, struct qcom_spmi_pmic *pmic) +{ + dev_info(dev, "%x: %s v%d.%d\n", + pmic->subtype, pmic->name, pmic->major, pmic->minor); +} + +static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, + struct qcom_spmi_pmic *pmic) { - unsigned int rev2, minor, major, type, subtype; - const char *name = "unknown"; int ret, i; - ret = regmap_read(map, PMIC_TYPE, &type); + ret = regmap_read(map, PMIC_TYPE, &pmic->type); if (ret < 0) - return; + return ret; - if (type != PMIC_TYPE_VALUE) - return; + if (pmic->type != PMIC_TYPE_VALUE) + return ret; - ret = regmap_read(map, PMIC_SUBTYPE, &subtype); + ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); if (ret < 0) - return; + return ret; for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { - if (subtype == (unsigned long)pmic_spmi_id_table[i].data) + if (pmic->subtype == (unsigned long)pmic_spmi_id_table[i].data) break; } if (i != ARRAY_SIZE(pmic_spmi_id_table)) - name = pmic_spmi_id_table[i].compatible; + pmic->name = devm_kstrdup_const(dev, pmic_spmi_id_table[i].compatible, GFP_KERNEL); - ret = regmap_read(map, PMIC_REV2, &rev2); + ret = regmap_read(map, PMIC_REV2, &pmic->rev2); if (ret < 0) - return; + return ret; - ret = regmap_read(map, PMIC_REV3, &minor); + ret = regmap_read(map, PMIC_REV3, &pmic->minor); if (ret < 0) - return; + return ret; - ret = regmap_read(map, PMIC_REV4, &major); + ret = regmap_read(map, PMIC_REV4, &pmic->major); if (ret < 0) - return; + return ret; /* * In early versions of PM8941 and PM8226, the major revision number @@ -124,14 +175,14 @@ static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) * Increment the major revision number here if the chip is an early * version of PM8941 or PM8226. */ - if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && - major < 0x02) - major++; + if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && + pmic->major < 0x02) + pmic->major++; - if (subtype == PM8110_SUBTYPE) - minor = rev2; + if (pmic->subtype == PM8110_SUBTYPE) + pmic->minor = pmic->rev2; - dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); + return 0; } static const struct regmap_config spmi_regmap_config = { @@ -144,14 +195,25 @@ static const struct regmap_config spmi_regmap_config = { static int pmic_spmi_probe(struct spmi_device *sdev) { struct regmap *regmap; + struct qcom_spmi_pmic *pmic; + int ret; regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); if (IS_ERR(regmap)) return PTR_ERR(regmap); + pmic = devm_kzalloc(&sdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + /* Only the first slave id for a PMIC contains this information */ - if (sdev->usid % 2 == 0) - pmic_spmi_show_revid(regmap, &sdev->dev); + if (sdev->usid % 2 == 0) { + ret = pmic_spmi_load_revid(regmap, &sdev->dev, pmic); + if (ret < 0) + return ret; + spmi_device_set_drvdata(sdev, pmic); + pmic_print_info(&sdev->dev, pmic); + } return devm_of_platform_populate(&sdev->dev); } diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h new file mode 100644 index 000000000000..a8a77be22cfc --- /dev/null +++ b/include/soc/qcom/qcom-spmi-pmic.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2021 Linaro. All rights reserved. + * Copyright (c) 2021 Caleb Connolly <caleb.connolly@linaro.org> + */ + +#ifndef __QCOM_PMIC_H__ +#define __QCOM_PMIC_H__ + +#define COMMON_SUBTYPE 0x00 +#define PM8941_SUBTYPE 0x01 +#define PM8841_SUBTYPE 0x02 +#define PM8019_SUBTYPE 0x03 +#define PM8226_SUBTYPE 0x04 +#define PM8110_SUBTYPE 0x05 +#define PMA8084_SUBTYPE 0x06 +#define PMI8962_SUBTYPE 0x07 +#define PMD9635_SUBTYPE 0x08 +#define PM8994_SUBTYPE 0x09 +#define PMI8994_SUBTYPE 0x0a +#define PM8916_SUBTYPE 0x0b +#define PM8004_SUBTYPE 0x0c +#define PM8909_SUBTYPE 0x0d +#define PM8028_SUBTYPE 0x0e +#define PM8901_SUBTYPE 0x0f +#define PM8950_SUBTYPE 0x10 +#define PMI8950_SUBTYPE 0x11 +#define PM8998_SUBTYPE 0x14 +#define PMI8998_SUBTYPE 0x15 +#define PM8005_SUBTYPE 0x18 +#define PM660L_SUBTYPE 0x1A +#define PM660_SUBTYPE 0x1B +#define PM8150_SUBTYPE 0x1E +#define PM8150L_SUBTYPE 0x1f +#define PM8150B_SUBTYPE 0x20 +#define PMK8002_SUBTYPE 0x21 +#define PM8009_SUBTYPE 0x24 +#define PM8150C_SUBTYPE 0x26 +#define SMB2351_SUBTYPE 0x29 + +#define PMI8998_FAB_ID_SMIC 0x11 +#define PMI8998_FAB_ID_GF 0x30 + +#define PM660_FAB_ID_GF 0x0 +#define PM660_FAB_ID_TSMC 0x2 +#define PM660_FAB_ID_MX 0x3 + +struct qcom_spmi_pmic { + unsigned int type; + unsigned int subtype; + unsigned int major; + unsigned int minor; + unsigned int rev2; + const char *name; +}; + +struct device; + +const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev); + +#endif /* __QCOM_PMIC_H__ */
Some PMIC functions such as the RRADC need to be aware of the PMIC chip revision information to implement errata or otherwise adjust behaviour, export the PMIC information to enable this. This is specifically required to enable the RRADC to adjust coefficients based on which chip fab the PMIC was produced in, this can vary per unique device and therefore has to be read at runtime. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- drivers/mfd/qcom-spmi-pmic.c | 176 ++++++++++++++++++++---------- include/soc/qcom/qcom-spmi-pmic.h | 60 ++++++++++ 2 files changed, 179 insertions(+), 57 deletions(-) create mode 100644 include/soc/qcom/qcom-spmi-pmic.h