| Message ID | 20220222145854.358646-2-krzysztof.kozlowski@canonical.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: ufs: add common platform bindings + fixes | expand |
On Tue, Feb 22, 2022 at 03:58:40PM +0100, Krzysztof Kozlowski wrote: > Add bindings for common parts (platform) of Universal Flash Storage > (UFS) Host Controllers in dtschema format. > > The 'freq-table-hz' is not correct in dtschema, because '-hz' suffix > defines uint32 type, not an array. Therefore deprecate 'freq-table-hz' > and use 'freq-table' instead. -hz is an array type. We can extend it to matrix if needed. I do think this property is a bit questionable. Do we really need a minimum in DT and if not, wouldn't assigned-clocks-rate work? Or an OPP table. > Include also the bindings directory in UFS maintainers entry. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > --- > .../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 2 +- > .../devicetree/bindings/ufs/ufs-common.yaml | 88 +++++++++++++++++++ > MAINTAINERS | 1 + > 3 files changed, 90 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml > > diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml > index 4d13e6bc1c50..dc93fe2d3458 100644 > --- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml > +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml > @@ -80,7 +80,7 @@ examples: > compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; > reg = <0x0 0x4000 0x0 0x10000>; > interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; > - freq-table-hz = <19200000 19200000>; > + freq-table = <19200000 19200000>; > power-domains = <&k3_pds 277>; > clocks = <&k3_clks 277 1>; > assigned-clocks = <&k3_clks 277 1>; > diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml > new file mode 100644 > index 000000000000..85c73d2853e9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/ufs/ufs-common.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Common properties for Universal Flash Storage (UFS) Host Controllers > + > +maintainers: > + - Alim Akhtar <alim.akhtar@samsung.com> > + - Avri Altman <avri.altman@wdc.com> > + > +properties: > + clocks: true > + > + clock-names: true > + > + freq-table-hz: > + deprecated: true > + description: > + Use freq-table. > + > + freq-table: > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + items: > + items: > + - description: Minimum frequency for given clock > + - description: Maximum frequency for given clock > + description: | > + Array of <min max> operating frequencies in Hz stored in the same order > + as the clocks property. If this property is not defined or a value in the > + array is "0" then it is assumed that the frequency is set by the parent > + clock or a fixed rate clock source. > + > + interrupts: > + maxItems: 1 > + > + lanes-per-direction: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2] > + default: 2 > + description: > + Number of lanes available per direction. Note that it is assume same > + number of lanes is used both directions at once. > + > + vdd-hba-supply: > + description: > + Phandle to UFS host controller supply regulator node. > + > + vcc-supply: > + description: > + Phandle to VCC supply regulator node. > + > + vccq-supply: > + description: > + Phandle to VCCQ supply regulator node. > + > + vccq2-supply: > + description: > + Phandle to VCCQ2 supply regulator node. > + > + vcc-supply-1p8: > + type: boolean > + description: > + For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This > + boolean property when set, specifies to use low voltage range of > + 1.7-1.95V. Note for external UFS cards this property is invalid and valid > + VCC range is always 2.7-3.6V. > + > + vcc-max-microamp: > + description: > + Specifies max. load that can be drawn from VCC supply. > + > + vccq-max-microamp: > + description: > + Specifies max. load that can be drawn from VCCQ supply. > + > + vccq2-max-microamp: > + description: > + Specifies max. load that can be drawn from VCCQ2 supply. > + > +dependencies: > + freq-table: [ 'clocks' ] > + > +required: > + - interrupts > + > +additionalProperties: true > diff --git a/MAINTAINERS b/MAINTAINERS > index aa0f6cbb634e..c2cff57d32f8 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -20015,6 +20015,7 @@ R: Alim Akhtar <alim.akhtar@samsung.com> > R: Avri Altman <avri.altman@wdc.com> > L: linux-scsi@vger.kernel.org > S: Supported > +F: Documentation/devicetree/bindings/ufs/ > F: Documentation/scsi/ufs.rst > F: drivers/scsi/ufs/ > > -- > 2.32.0 > >
On 25/02/2022 20:26, Rob Herring wrote: > On Tue, Feb 22, 2022 at 03:58:40PM +0100, Krzysztof Kozlowski wrote: >> Add bindings for common parts (platform) of Universal Flash Storage >> (UFS) Host Controllers in dtschema format. >> >> The 'freq-table-hz' is not correct in dtschema, because '-hz' suffix >> defines uint32 type, not an array. Therefore deprecate 'freq-table-hz' >> and use 'freq-table' instead. > > -hz is an array type. We can extend it to matrix if needed. > > I do think this property is a bit questionable. Do we really need a > minimum in DT and if not, wouldn't assigned-clocks-rate work? Or an OPP > table. > I think the proper solution is OPP table, see also comments from Bjorn: https://lore.kernel.org/all/YhUodbzxx4wbr+gy@ripper/ I would rather refrain from converting it to OPP tables, because I won't be able to test any changes in the driver. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml index 4d13e6bc1c50..dc93fe2d3458 100644 --- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml @@ -80,7 +80,7 @@ examples: compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; reg = <0x0 0x4000 0x0 0x10000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - freq-table-hz = <19200000 19200000>; + freq-table = <19200000 19200000>; power-domains = <&k3_pds 277>; clocks = <&k3_clks 277 1>; assigned-clocks = <&k3_clks 277 1>; diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml new file mode 100644 index 000000000000..85c73d2853e9 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/ufs-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for Universal Flash Storage (UFS) Host Controllers + +maintainers: + - Alim Akhtar <alim.akhtar@samsung.com> + - Avri Altman <avri.altman@wdc.com> + +properties: + clocks: true + + clock-names: true + + freq-table-hz: + deprecated: true + description: + Use freq-table. + + freq-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Minimum frequency for given clock + - description: Maximum frequency for given clock + description: | + Array of <min max> operating frequencies in Hz stored in the same order + as the clocks property. If this property is not defined or a value in the + array is "0" then it is assumed that the frequency is set by the parent + clock or a fixed rate clock source. + + interrupts: + maxItems: 1 + + lanes-per-direction: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 2 + description: + Number of lanes available per direction. Note that it is assume same + number of lanes is used both directions at once. + + vdd-hba-supply: + description: + Phandle to UFS host controller supply regulator node. + + vcc-supply: + description: + Phandle to VCC supply regulator node. + + vccq-supply: + description: + Phandle to VCCQ supply regulator node. + + vccq2-supply: + description: + Phandle to VCCQ2 supply regulator node. + + vcc-supply-1p8: + type: boolean + description: + For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This + boolean property when set, specifies to use low voltage range of + 1.7-1.95V. Note for external UFS cards this property is invalid and valid + VCC range is always 2.7-3.6V. + + vcc-max-microamp: + description: + Specifies max. load that can be drawn from VCC supply. + + vccq-max-microamp: + description: + Specifies max. load that can be drawn from VCCQ supply. + + vccq2-max-microamp: + description: + Specifies max. load that can be drawn from VCCQ2 supply. + +dependencies: + freq-table: [ 'clocks' ] + +required: + - interrupts + +additionalProperties: true diff --git a/MAINTAINERS b/MAINTAINERS index aa0f6cbb634e..c2cff57d32f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20015,6 +20015,7 @@ R: Alim Akhtar <alim.akhtar@samsung.com> R: Avri Altman <avri.altman@wdc.com> L: linux-scsi@vger.kernel.org S: Supported +F: Documentation/devicetree/bindings/ufs/ F: Documentation/scsi/ufs.rst F: drivers/scsi/ufs/
Add bindings for common parts (platform) of Universal Flash Storage (UFS) Host Controllers in dtschema format. The 'freq-table-hz' is not correct in dtschema, because '-hz' suffix defines uint32 type, not an array. Therefore deprecate 'freq-table-hz' and use 'freq-table' instead. Include also the bindings directory in UFS maintainers entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 2 +- .../devicetree/bindings/ufs/ufs-common.yaml | 88 +++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 90 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml