diff mbox series

[v6,10/43] hw/cxl/device: Add log commands (8.2.9.4) + CEL

Message ID 20220211120747.3074-11-Jonathan.Cameron@huawei.com
State Superseded
Headers show
Series CXl 2.0 emulation Support | expand

Commit Message

Jonathan Cameron Feb. 11, 2022, 12:07 p.m. UTC
From: Ben Widawsky <ben.widawsky@intel.com>

CXL specification provides for the ability to obtain logs from the
device. Logs are either spec defined, like the "Command Effects Log"
(CEL), or vendor specific. UUIDs are defined for all log types.

The CEL is a mechanism to provide information to the host about which
commands are supported. It is useful both to determine which spec'd
optional commands are supported, as well as provide a list of vendor
specified commands that might be used. The CEL is already created as
part of mailbox initialization, but here it is now exported to hosts
that use these log commands.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 hw/cxl/cxl-mailbox-utils.c | 69 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

Comments

Alex Bennée March 1, 2022, 5:45 p.m. UTC | #1
Jonathan Cameron <Jonathan.Cameron@huawei.com> writes:

> From: Ben Widawsky <ben.widawsky@intel.com>
>
> CXL specification provides for the ability to obtain logs from the
> device. Logs are either spec defined, like the "Command Effects Log"
> (CEL), or vendor specific. UUIDs are defined for all log types.
>
> The CEL is a mechanism to provide information to the host about which
> commands are supported. It is useful both to determine which spec'd
> optional commands are supported, as well as provide a list of vendor
> specified commands that might be used. The CEL is already created as
> part of mailbox initialization, but here it is now exported to hosts
> that use these log commands.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
diff mbox series

Patch

diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index 258285ab03..16bb998735 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -47,6 +47,9 @@  enum {
     TIMESTAMP   = 0x03,
         #define GET           0x0
         #define SET           0x1
+    LOGS        = 0x04,
+        #define GET_SUPPORTED 0x0
+        #define GET_LOG       0x1
 };
 
 /* 8.2.8.4.5.1 Command Return Codes */
@@ -149,6 +152,70 @@  static ret_code cmd_timestamp_set(struct cxl_cmd *cmd,
 
 static QemuUUID cel_uuid;
 
+/* 8.2.9.4.1 */
+static ret_code cmd_logs_get_supported(struct cxl_cmd *cmd,
+                                       CXLDeviceState *cxl_dstate,
+                                       uint16_t *len)
+{
+    struct {
+        uint16_t entries;
+        uint8_t rsvd[6];
+        struct {
+            QemuUUID uuid;
+            uint32_t size;
+        } log_entries[1];
+    } __attribute__((packed)) *supported_logs = (void *)cmd->payload;
+    _Static_assert(sizeof(*supported_logs) == 0x1c, "Bad supported log size");
+
+    supported_logs->entries = 1;
+    supported_logs->log_entries[0].uuid = cel_uuid;
+    supported_logs->log_entries[0].size = 4 * cxl_dstate->cel_size;
+
+    *len = sizeof(*supported_logs);
+    return CXL_MBOX_SUCCESS;
+}
+
+/* 8.2.9.4.2 */
+static ret_code cmd_logs_get_log(struct cxl_cmd *cmd,
+                                 CXLDeviceState *cxl_dstate,
+                                 uint16_t *len)
+{
+    struct {
+        QemuUUID uuid;
+        uint32_t offset;
+        uint32_t length;
+    } __attribute__((packed, __aligned__(16))) *get_log = (void *)cmd->payload;
+
+    /*
+     * 8.2.9.4.2
+     *   The device shall return Invalid Parameter if the Offset or Length
+     *   fields attempt to access beyond the size of the log as reported by Get
+     *   Supported Logs.
+     *
+     * XXX: Spec is wrong, "Invalid Parameter" isn't a thing.
+     * XXX: Spec doesn't address incorrect UUID incorrectness.
+     *
+     * The CEL buffer is large enough to fit all commands in the emulation, so
+     * the only possible failure would be if the mailbox itself isn't big
+     * enough.
+     */
+    if (get_log->offset + get_log->length > cxl_dstate->payload_size) {
+        return CXL_MBOX_INVALID_INPUT;
+    }
+
+    if (!qemu_uuid_is_equal(&get_log->uuid, &cel_uuid)) {
+        return CXL_MBOX_UNSUPPORTED;
+    }
+
+    /* Store off everything to local variables so we can wipe out the payload */
+    *len = get_log->length;
+
+    memmove(cmd->payload, cxl_dstate->cel_log + get_log->offset,
+           get_log->length);
+
+    return CXL_MBOX_SUCCESS;
+}
+
 #define IMMEDIATE_CONFIG_CHANGE (1 << 1)
 #define IMMEDIATE_POLICY_CHANGE (1 << 3)
 #define IMMEDIATE_LOG_CHANGE (1 << 4)
@@ -164,6 +231,8 @@  static struct cxl_cmd cxl_cmd_set[256][256] = {
         cmd_events_set_interrupt_policy, 4, IMMEDIATE_CONFIG_CHANGE },
     [TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 },
     [TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, IMMEDIATE_POLICY_CHANGE },
+    [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, 0 },
+    [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 },
 };
 
 void cxl_process_mailbox(CXLDeviceState *cxl_dstate)