| Message ID | 20220228213802.1639658-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: Another pass removing cases of 'allOf' containing a '$ref' | expand |
On Mon, 28 Feb 2022 15:38:02 -0600 Rob Herring <robh@kernel.org> wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. For Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml Acked-by: Marek Behún <kabel@kernel.org>
On Mon, Feb 28, 2022 at 03:38:02PM -0600, Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. Acked-by: Mark Brown <broonie@kernel.org>
Hi Rob, robh@kernel.org wrote on Mon, 28 Feb 2022 15:38:02 -0600: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: Richard Weinberger <richard@nod.at> > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-input@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: netdev@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/connector/usb-connector.yaml | 3 +-- > .../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +-- > .../bindings/display/bridge/adi,adv7511.yaml | 5 ++--- > .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++--- > .../bindings/display/panel/display-timings.yaml | 3 +-- > .../devicetree/bindings/display/ste,mcde.yaml | 4 ++-- > .../devicetree/bindings/input/adc-joystick.yaml | 9 ++++----- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +-- > .../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +-- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++-------- > .../devicetree/bindings/mtd/nand-controller.yaml | 8 +++----- > .../bindings/mtd/rockchip,nand-controller.yaml | 3 +-- For MTD bindings: Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Thanks, Miquèl
Hi Rob, Thank you for the patch. On Mon, Feb 28, 2022 at 03:38:02PM -0600, Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: Richard Weinberger <richard@nod.at> > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-input@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: netdev@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > .../bindings/connector/usb-connector.yaml | 3 +-- > .../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +-- > .../bindings/display/bridge/adi,adv7511.yaml | 5 ++--- > .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++--- > .../bindings/display/panel/display-timings.yaml | 3 +-- > .../devicetree/bindings/display/ste,mcde.yaml | 4 ++-- > .../devicetree/bindings/input/adc-joystick.yaml | 9 ++++----- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +-- > .../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +-- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++-------- > .../devicetree/bindings/mtd/nand-controller.yaml | 8 +++----- > .../bindings/mtd/rockchip,nand-controller.yaml | 3 +-- > .../devicetree/bindings/net/ti,cpsw-switch.yaml | 3 +-- > .../bindings/phy/phy-stm32-usbphyc.yaml | 3 +-- > .../bindings/power/supply/sbs,sbs-manager.yaml | 4 +--- > .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 3 +-- > .../devicetree/bindings/soc/ti/ti,pruss.yaml | 15 +++------------ > .../devicetree/bindings/sound/st,stm32-sai.yaml | 3 +-- > .../devicetree/bindings/sound/tlv320adcx140.yaml | 13 ++++++------- > .../devicetree/bindings/spi/spi-controller.yaml | 4 +--- > .../devicetree/bindings/usb/st,stusb160x.yaml | 4 +--- > 21 files changed, 39 insertions(+), 74 deletions(-)
On Mon, Feb 28, 2022 at 03:38:02PM -0600, Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: Richard Weinberger <richard@nod.at> > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-input@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: netdev@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Mon, 28 Feb 2022, Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: Richard Weinberger <richard@nod.at> > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-input@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: netdev@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/connector/usb-connector.yaml | 3 +-- > .../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +-- > .../bindings/display/bridge/adi,adv7511.yaml | 5 ++--- > .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++--- > .../bindings/display/panel/display-timings.yaml | 3 +-- > .../devicetree/bindings/display/ste,mcde.yaml | 4 ++-- > .../devicetree/bindings/input/adc-joystick.yaml | 9 ++++----- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +-- > .../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +-- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++-------- Go for it. Acked-by: Lee Jones <lee.jones@linaro.org> > .../devicetree/bindings/mtd/nand-controller.yaml | 8 +++----- > .../bindings/mtd/rockchip,nand-controller.yaml | 3 +-- > .../devicetree/bindings/net/ti,cpsw-switch.yaml | 3 +-- > .../bindings/phy/phy-stm32-usbphyc.yaml | 3 +-- > .../bindings/power/supply/sbs,sbs-manager.yaml | 4 +--- > .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 3 +-- > .../devicetree/bindings/soc/ti/ti,pruss.yaml | 15 +++------------ > .../devicetree/bindings/sound/st,stm32-sai.yaml | 3 +-- > .../devicetree/bindings/sound/tlv320adcx140.yaml | 13 ++++++------- > .../devicetree/bindings/spi/spi-controller.yaml | 4 +--- > .../devicetree/bindings/usb/st,stusb160x.yaml | 4 +--- > 21 files changed, 39 insertions(+), 74 deletions(-)
On 28-02-22, 15:38, Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. ... > .../bindings/connector/usb-connector.yaml | 3 +-- > .../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +-- > .../bindings/display/bridge/adi,adv7511.yaml | 5 ++--- > .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++--- > .../bindings/display/panel/display-timings.yaml | 3 +-- > .../devicetree/bindings/display/ste,mcde.yaml | 4 ++-- > .../devicetree/bindings/input/adc-joystick.yaml | 9 ++++----- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +-- > .../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +-- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++-------- > .../devicetree/bindings/mtd/nand-controller.yaml | 8 +++----- > .../bindings/mtd/rockchip,nand-controller.yaml | 3 +-- > .../devicetree/bindings/net/ti,cpsw-switch.yaml | 3 +-- > .../bindings/phy/phy-stm32-usbphyc.yaml | 3 +-- Acked-By: Vinod Koul <vkoul@kernel.org>
On Mon, 28 Feb 2022 15:38:02 -0600 Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. Acked-by: Jakub Kicinski <kuba@kernel.org>
On Mon 28 Feb 13:38 PST 2022, Rob Herring wrote: > Another pass at removing unnecessary use of 'allOf' with a '$ref'. > > json-schema versions draft7 and earlier have a weird behavior in that > any keywords combined with a '$ref' are ignored (silently). The correct > form was to put a '$ref' under an 'allOf'. This behavior is now changed > in the 2019-09 json-schema spec and '$ref' can be mixed with other > keywords. > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Miquel Raynal <miquel.raynal@bootlin.com> > Cc: Richard Weinberger <richard@nod.at> > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-input@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-mtd@lists.infradead.org > Cc: netdev@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-pm@vger.kernel.org > Cc: linux-remoteproc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/connector/usb-connector.yaml | 3 +-- > .../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +-- > .../bindings/display/bridge/adi,adv7511.yaml | 5 ++--- > .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++--- > .../bindings/display/panel/display-timings.yaml | 3 +-- > .../devicetree/bindings/display/ste,mcde.yaml | 4 ++-- > .../devicetree/bindings/input/adc-joystick.yaml | 9 ++++----- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +-- > .../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +-- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++-------- > .../devicetree/bindings/mtd/nand-controller.yaml | 8 +++----- > .../bindings/mtd/rockchip,nand-controller.yaml | 3 +-- > .../devicetree/bindings/net/ti,cpsw-switch.yaml | 3 +-- > .../bindings/phy/phy-stm32-usbphyc.yaml | 3 +-- > .../bindings/power/supply/sbs,sbs-manager.yaml | 4 +--- > .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 3 +-- For the remoteproc binding: Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thanks, Bjorn
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 7eb8659fa610..0420fa563532 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -104,8 +104,7 @@ properties: - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB Type-C Cable and Connector specification, when Power Delivery is not supported. - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string enum: - default - 1.5A diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index a1d5a32660e0..a9d34dd7bbc5 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -72,8 +72,7 @@ properties: - const: hpd-removed ddc: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: > Phandle of the I2C controller used for DDC EDID probing diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml index d3dd7a79b909..f08a01dfedf3 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -76,9 +76,8 @@ properties: adi,input-depth: description: Number of bits per color component at the input. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 10, 12 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 10, 12 ] adi,input-colorspace: description: Input color space. diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml index 9be44a682e67..b00246faea57 100644 --- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -26,9 +26,8 @@ properties: reg-io-width: description: Width (in bytes) of the registers specified by the reg property. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] default: 1 clocks: diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml index 56903ded005e..6d30575819d3 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml @@ -31,8 +31,7 @@ properties: patternProperties: "^timing": type: object - allOf: - - $ref: panel-timing.yaml# + $ref: panel-timing.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml index de0c678b3c29..564ea845c82e 100644 --- a/Documentation/devicetree/bindings/display/ste,mcde.yaml +++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -58,8 +58,8 @@ patternProperties: "^dsi@[0-9a-f]+$": description: subnodes for the three DSI host adapters type: object - allOf: - - $ref: dsi-controller.yaml# + $ref: dsi-controller.yaml# + properties: compatible: const: ste,mcde-dsi diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml index 721878d5b7af..2ee04e03bc22 100644 --- a/Documentation/devicetree/bindings/input/adc-joystick.yaml +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -61,11 +61,10 @@ patternProperties: description: EV_ABS specific event code generated by the axis. abs-range: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - description: minimum value - - description: maximum value + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: minimum value + - description: maximum value description: > Minimum and maximum values produced by the axis. For an ABS_X axis this will be the left-most and right-most diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index c7ed2871da06..9362b1ef9e88 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -32,8 +32,7 @@ properties: patternProperties: "^multi-led@[0-9a-b]$": type: object - allOf: - - $ref: leds-class-multicolor.yaml# + $ref: leds-class-multicolor.yaml# description: This node represents one of the RGB LED devices on Turris Omnia. No subnodes need to be added for subchannels since this controller only diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml index c192b5feadc7..f12fe5b53f30 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml @@ -55,8 +55,7 @@ properties: patternProperties: '^multi-led@[0-9a-f]$': type: object - allOf: - - $ref: leds-class-multicolor.yaml# + $ref: leds-class-multicolor.yaml# properties: reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index d1f53bd449f7..a52f3a82283c 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -38,18 +38,14 @@ properties: description: This property specifies the delay in usecs between the assertion of the CS and the first clock pulse. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 - - minimum: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 google,cros-ec-spi-msg-delay: description: This property specifies the delay in usecs between messages. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 - - minimum: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 google,has-vbc-nvram: description: diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index bd217e6f5018..0714f614550d 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -58,8 +58,7 @@ patternProperties: Contains the native Ready/Busy IDs. nand-ecc-engine: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: | A phandle on the hardware ECC engine if any. There are basically three possibilities: @@ -79,9 +78,8 @@ patternProperties: description: Do not use any ECC correction. nand-ecc-placement: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ oob, interleaved ] + $ref: /schemas/types.yaml#/definitions/string + enum: [ oob, interleaved ] description: Location of the ECC bytes. This location is unknown by default but can be explicitly set to "oob", if all ECC bytes are diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index 0922536b1811..d681a4676f06 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -96,8 +96,7 @@ patternProperties: rockchip,boot-ecc-strength: enum: [16, 24, 40, 60, 70] - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | If specified it indicates that a different BCH/ECC setting is supported by the boot ROM. diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 07a00f53adbf..31bf825c6598 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -88,8 +88,7 @@ properties: type: object description: CPSW external ports - allOf: - - $ref: ethernet-controller.yaml# + $ref: ethernet-controller.yaml# properties: reg: diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 267b695215b6..dc287d428e49 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -76,8 +76,7 @@ patternProperties: connector: type: object - allOf: - - $ref: ../connector/usb-connector.yaml + $ref: /schemas/connector/usb-connector.yaml properties: vbus-supply: true diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml index 72e8f274c791..99f506d6b0a0 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -46,9 +46,7 @@ additionalProperties: false patternProperties: "^i2c@[1-4]$": type: object - - allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# + $ref: /schemas/i2c/i2c-controller.yaml# examples: - | diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index 0868154a0364..fb9605f0655b 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -95,8 +95,7 @@ patternProperties: addresses. Cache and memory access settings are provided through a Memory Protection Unit (MPU), programmable only from the R5Fs. - allOf: - - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 9d128b9e7deb..64461d432004 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -281,10 +281,7 @@ patternProperties: PRUSS INTC Node. Each PRUSS has a single interrupt controller instance that is common to all the PRU cores. This should be represented as an interrupt-controller node. - - allOf: - - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# - + $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# type: object mdio@[a-f0-9]+$: @@ -292,10 +289,7 @@ patternProperties: MDIO Node. Each PRUSS has an MDIO module that can be used to control external PHYs. The MDIO module used within the PRU-ICSS is an instance of the MDIO Controller used in TI Davinci SoCs. - - allOf: - - $ref: /schemas/net/ti,davinci-mdio.yaml# - + $ref: /schemas/net/ti,davinci-mdio.yaml# type: object "^(pru|rtu|txpru)@[0-9a-f]+$": @@ -305,10 +299,7 @@ patternProperties: inactive by using the standard DT string property, "status". The ICSSG IP present on K3 SoCs have additional auxiliary PRU cores with slightly different IP integration. - - allOf: - - $ref: /schemas/remoteproc/ti,pru-rproc.yaml# - + $ref: /schemas/remoteproc/ti,pru-rproc.yaml# type: object required: diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index d4fc8fdcb72f..b3dbcba33e41 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -115,8 +115,7 @@ patternProperties: By default, custom protocol is assumed, meaning that protocol is configured according to protocol defined in related DAI link node, such as i2s, left justified, right justified, dsp and pdm protocols. - allOf: - - $ref: /schemas/types.yaml#/definitions/flag + $ref: /schemas/types.yaml#/definitions/flag "#clock-cells": description: Configure the SAI device as master clock provider. diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index d77c8283526d..2ad17b361db0 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -176,13 +176,12 @@ patternProperties: 4 - Drive weak low and active high 5 - Drive Hi-Z and active high - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - maximum: 15 - default: [2, 2] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + maximum: 15 + default: [2, 2] required: - compatible diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 36b72518f565..6d0511a8727f 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -93,9 +93,7 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object - - allOf: - - $ref: spi-peripheral-props.yaml + $ref: spi-peripheral-props.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml index ead1571e0e43..b5a8c9814dd3 100644 --- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -32,9 +32,7 @@ properties: connector: type: object - - allOf: - - $ref: ../connector/usb-connector.yaml + $ref: /schemas/connector/usb-connector.yaml# properties: compatible:
Another pass at removing unnecessary use of 'allOf' with a '$ref'. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Lee Jones <lee.jones@linaro.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-pm@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-spi@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/connector/usb-connector.yaml | 3 +-- .../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +-- .../bindings/display/bridge/adi,adv7511.yaml | 5 ++--- .../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++--- .../bindings/display/panel/display-timings.yaml | 3 +-- .../devicetree/bindings/display/ste,mcde.yaml | 4 ++-- .../devicetree/bindings/input/adc-joystick.yaml | 9 ++++----- .../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +-- .../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +-- .../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++-------- .../devicetree/bindings/mtd/nand-controller.yaml | 8 +++----- .../bindings/mtd/rockchip,nand-controller.yaml | 3 +-- .../devicetree/bindings/net/ti,cpsw-switch.yaml | 3 +-- .../bindings/phy/phy-stm32-usbphyc.yaml | 3 +-- .../bindings/power/supply/sbs,sbs-manager.yaml | 4 +--- .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 3 +-- .../devicetree/bindings/soc/ti/ti,pruss.yaml | 15 +++------------ .../devicetree/bindings/sound/st,stm32-sai.yaml | 3 +-- .../devicetree/bindings/sound/tlv320adcx140.yaml | 13 ++++++------- .../devicetree/bindings/spi/spi-controller.yaml | 4 +--- .../devicetree/bindings/usb/st,stusb160x.yaml | 4 +--- 21 files changed, 39 insertions(+), 74 deletions(-)