| Message ID | 20220201223948.1455637-1-keescook@chromium.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | scsi: mpt3sas: Convert to flexible arrays | expand |
Kees, > This converts to a flexible array instead of the old-style 1-element > arrays. The existing code already did the correct math for finding the > size of the resulting flexible array structure, so there is no binary > difference. Applied to 5.18/scsi-staging, thanks!
On Tue, 1 Feb 2022 14:39:48 -0800, Kees Cook wrote: > This converts to a flexible array instead of the old-style 1-element > arrays. The existing code already did the correct math for finding the > size of the resulting flexible array structure, so there is no binary > difference. > > The other two structures converted to use flexible arrays appear to > have no users at all. > > [...] Applied to 5.18/scsi-queue, thanks! [1/1] scsi: mpt3sas: Convert to flexible arrays https://git.kernel.org/mkp/scsi/c/d20b3dae630f
Hi, I am observing below kernel panic when I load the driver with this patch changes. After reverting this patch changes then the driver is getting loaded successfully. [ 414.493579] mpt3sas_cm0: port enable: SUCCESS [ 414.498313] BUG: unable to handle page fault for address: 00000024000000ba [ 414.505182] #PF: supervisor read access in kernel mode [ 414.510322] #PF: error_code(0x0000) - not-present page [ 414.515462] PGD 0 P4D 0 [ 414.518000] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 414.522360] CPU: 31 PID: 48 Comm: kworker/u98:0 Kdump: loaded Tainted: G OE 5.17.0-rc1+ #1 [ 414.531833] Hardware name: Supermicro AS -1114S-WTRT/H12SSW-NT, BIOS 1.1a 05/28/2020 [ 414.539564] Workqueue: events_unbound async_run_entry_fn [ 414.544877] RIP: 0010:scsih_qcmd+0x29/0x450 [mpt3sas] [ 414.549938] Code: 00 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 18 f6 87 91 08 00 00 40 0f 85 e3 00 05 [ 414.568684] RSP: 0018:ffffa397c67df8d0 EFLAGS: 00010246 [ 414.573912] RAX: 0000002400000012 RBX: ffff947666d84208 RCX: ffff947666d84208 [ 414.581042] RDX: ffff947603afa000 RSI: ffff947666d84208 RDI: ffff947603afa000 [ 414.588168] RBP: ffff947603afa000 R08: 0000000000000020 R09: ffff94764ad2fa30 [ 414.595301] R10: 0000000000000000 R11: 0000000000000001 R12: ffff947603afa000 [ 414.602434] R13: ffff947667d87000 R14: ffff947603afa000 R15: ffffa397c67df9d0 [ 414.609568] FS: 0000000000000000(0000) GS:ffff947d2fbc0000(0000) knlGS:0000000000000000 [ 414.617654] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 414.623399] CR2: 00000024000000ba CR3: 00000004c9e0a000 CR4: 0000000000350ee0 [ 414.630531] Call Trace: [ 414.632977] <TASK> [ 414.635084] scsi_queue_rq+0x36e/0xa70 [ 414.638836] blk_mq_dispatch_rq_list+0x2f6/0x8e0 [ 414.643455] ? get_page_from_freelist+0xb70/0xe50 [ 414.648161] ? __sbitmap_get_word+0x37/0x80 [ 414.652347] __blk_mq_sched_dispatch_requests+0xb2/0x140 [ 414.657661] blk_mq_sched_dispatch_requests+0x30/0x60 [ 414.662712] __blk_mq_run_hw_queue+0x34/0x90 [ 414.666985] __blk_mq_delay_run_hw_queue+0x18b/0x1c0 [ 414.671949] blk_mq_sched_insert_request+0xd3/0x140 [ 414.676830] blk_execute_rq+0x53/0xf0 [ 414.680495] __scsi_execute+0x101/0x260 [ 414.684337] scsi_probe_and_add_lun+0x181/0xe10 [ 414.688869] __scsi_scan_target+0xec/0x5a0 [ 414.692969] ? _raw_spin_unlock_irqrestore+0x1f/0x31 [ 414.697933] ? __pm_runtime_resume+0x54/0x70 [ 414.702208] scsi_scan_target+0xf8/0x110 [ 414.706135] sas_rphy_add+0x162/0x1b0 [scsi_transport_sas] [ 414.711620] mpt3sas_transport_port_add+0x315/0x480 [mpt3sas] [ 414.717375] _scsih_complete_devices_scanning+0x2f8/0x336 [mpt3sas] [ 414.723648] scsih_scan_finished.cold.103+0x91/0xe3 [mpt3sas] [ 414.729393] do_scsi_scan_host+0x6f/0x90 [ 414.733321] do_scan_async+0x17/0x150 [ 414.736987] async_run_entry_fn+0x30/0x130 [ 414.741085] process_one_work+0x1c8/0x390 [ 414.745099] worker_thread+0x30/0x350 [ 414.748764] ? process_one_work+0x390/0x390 [ 414.752951] kthread+0xe8/0x110 [ 414.756098] ? kthread_complete_and_exit+0x20/0x20 [ 414.760891] ret_from_fork+0x22/0x30 [ 414.764469] </TASK> [ 414.766662] Modules linked in: mpt3sas(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_nat_tftp nft_objref nf_conntrack_tc [ 414.766715] drm_ttm_helper ttm ahci crc32c_intel libahci drm bnxt_en libata raid_class scsi_transport_sas pinctrl_amd dm_mirror d] [ 414.869470] CR2: 00000024000000ba Thanks, Sreekanth On Sat, Feb 12, 2022 at 4:55 AM Martin K. Petersen <martin.petersen@oracle.com> wrote: > > On Tue, 1 Feb 2022 14:39:48 -0800, Kees Cook wrote: > > > This converts to a flexible array instead of the old-style 1-element > > arrays. The existing code already did the correct math for finding the > > size of the resulting flexible array structure, so there is no binary > > difference. > > > > The other two structures converted to use flexible arrays appear to > > have no users at all. > > > > [...] > > Applied to 5.18/scsi-queue, thanks! > > [1/1] scsi: mpt3sas: Convert to flexible arrays > https://git.kernel.org/mkp/scsi/c/d20b3dae630f > > -- > Martin K. Petersen Oracle Linux Engineering
Sreekanth, > I am observing below kernel panic when I load the driver with this > patch changes. After reverting this patch changes then the driver is > getting loaded successfully. I am puzzled. The driver loads fine for me. I have verified that the generated object file is identical before and after Kees' patch.
On Wed, Mar 9, 2022 at 8:50 AM Martin K. Petersen <martin.petersen@oracle.com> wrote: > > > Sreekanth, > > > I am observing below kernel panic when I load the driver with this > > patch changes. After reverting this patch changes then the driver is > > getting loaded successfully. > > I am puzzled. The driver loads fine for me. I have verified that the > generated object file is identical before and after Kees' patch. Looks like we will observe this issue only if DIF Type 2 drive is connected to the HBA. When this panic occurred I had connected one DIF Type2 drive to the HBA. Thanks, Sreekanth > > -- > Martin K. Petersen Oracle Linux Engineering
On Tue, Mar 08, 2022 at 10:20:28PM -0500, Martin K. Petersen wrote: > > Sreekanth, > > > I am observing below kernel panic when I load the driver with this > > patch changes. After reverting this patch changes then the driver is > > getting loaded successfully. > > I am puzzled. The driver loads fine for me. I have verified that the > generated object file is identical before and after Kees' patch. I've double-checked this again myself; I don't see any binary difference. Can you share your .config? I was using defconfig with these added: SCSI_LOWLEVEL=y SCSI_MPT3SAS=y
Sreekanth, > Looks like we will observe this issue only if DIF Type 2 drive is > connected to the HBA. When this panic occurred I had connected one DIF > Type2 drive to the HBA. No problems with Type 2 devices observed here.
On Tue, Mar 15, 2022 at 8:58 AM Martin K. Petersen <martin.petersen@oracle.com> wrote: > > > Sreekanth, > > > Looks like we will observe this issue only if DIF Type 2 drive is > > connected to the HBA. When this panic occurred I had connected one DIF > > Type2 drive to the HBA. > > No problems with Type 2 devices observed here. Martin, Sorry, somehow I am also not able to reproduce the issue again. I see that the driver is getting loaded successfully. I have to recollect what config I have used earlier. Thanks, Sreekanth > > -- > Martin K. Petersen Oracle Linux Engineering
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index e83c7c529dc9..2c57115172cf 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -537,7 +537,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { U16 Event; /*0x14 */ U16 Reserved4; /*0x16 */ U32 EventContext; /*0x18 */ - U32 EventData[1]; /*0x1C */ + U32 EventData[]; /*0x1C */ } MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, Mpi2EventNotificationReply_t, *pMpi2EventNotificationReply_t; @@ -639,7 +639,7 @@ typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { U8 Reserved1; /*0x01 */ U16 Reserved2; /*0x02 */ U32 Reserved3; /*0x04 */ - U32 HostData[1]; /*0x08 */ + U32 HostData[]; /*0x08 */ } MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; @@ -1397,7 +1397,7 @@ typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { U32 Reserved8; /*0x18 */ U32 Reserved9; /*0x1C */ U32 Reserved10; /*0x20 */ - U32 HostData[1]; /*0x24 */ + U32 HostData[]; /*0x24 */ } MPI2_SEND_HOST_MESSAGE_REQUEST, *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, Mpi2SendHostMessageRequest_t,
This converts to a flexible array instead of the old-style 1-element arrays. The existing code already did the correct math for finding the size of the resulting flexible array structure, so there is no binary difference. The other two structures converted to use flexible arrays appear to have no users at all. Signed-off-by: Kees Cook <keescook@chromium.org> --- drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)