@@ -256,7 +256,7 @@ static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_H
event->parameter_len = strlen(header->err_specific_desc);
memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str));
if (event->severity != TW_AEN_SEVERITY_DEBUG)
- printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
+ printk(KERN_INFO "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
host,
twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)),
TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str,
@@ -873,14 +873,14 @@ static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, in
error = le16_to_cpu(header->status_block.error);
if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) {
if (print_host)
- printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
+ printk(KERN_ERR "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
tw_dev->host->host_no,
TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
header->status_block.error,
error_str,
header->err_specific_desc);
else
- printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
+ printk(KERN_ERR "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
header->status_block.error,
error_str,
@@ -1493,13 +1493,13 @@ static void __twl_shutdown(TW_Device_Extension *tw_dev)
/* Free up the IRQ */
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
- printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no);
+ printk(KERN_INFO "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed");
} else {
- printk(KERN_WARNING "3w-sas: Shutdown complete.\n");
+ printk(KERN_INFO "3w-sas: Shutdown complete.\n");
}
/* Clear doorbell interrupt just before exit */
@@ -1631,7 +1631,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
pci_set_drvdata(pdev, host);
- printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
+ printk(KERN_INFO "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
host->host_no,
(char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH),
@@ -1642,7 +1642,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
if (ptr_phycount)
phycount = le32_to_cpu(*(int *)ptr_phycount);
- printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
+ printk(KERN_INFO "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
host->host_no,
(char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH),
@@ -1753,7 +1753,7 @@ static int __maybe_unused twl_suspend(struct device *dev)
struct Scsi_Host *host = dev_get_drvdata(dev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
- printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no);
+ printk(KERN_INFO "3w-sas: Suspending host %d.\n", tw_dev->host->host_no);
/* Disable interrupts */
TWL_MASK_INTERRUPTS(tw_dev);
@@ -1763,7 +1763,7 @@ static int __maybe_unused twl_suspend(struct device *dev)
if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend");
} else {
- printk(KERN_WARNING "3w-sas: Suspend complete.\n");
+ printk(KERN_INFO "3w-sas: Suspend complete.\n");
}
/* Clear doorbell interrupt */
@@ -1780,7 +1780,7 @@ static int __maybe_unused twl_resume(struct device *dev)
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
- printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
+ printk(KERN_INFO "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
@@ -1811,7 +1811,7 @@ static int __maybe_unused twl_resume(struct device *dev)
/* Re-enable interrupts on the card */
TWL_UNMASK_INTERRUPTS(tw_dev);
- printk(KERN_WARNING "3w-sas: Resume complete.\n");
+ printk(KERN_INFO "3w-sas: Resume complete.\n");
return 0;
out_disable_device:
On a Dell PowerEdge T630, Linux logs some 3w-sas warnings: $ dmesg | grep DMI: [ 0.000000] DMI: Dell Inc. PowerEdge T630/0W9WXC, BIOS 2.5.4 08/17/2017 $ dmesg --level=warn | grep 3w [ 22.449617] 3w-sas: scsi12: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. [ 22.680618] 3w-sas: scsi12: Found an LSI 3ware 9750-8e Controller at 0xc8040000, IRQ: 117. [ 23.001611] 3w-sas: scsi12: Firmware FH9X 5.12.00.016, BIOS BE9X 5.11.00.007, Phys: 8. These are obviously no warnings, and just informational messages. Look through the file, and adapt the log level of several messages mostly according to the level string in the message. The message below is the only tricky change, as the log level actually depends on the AEN severity determined by `twl_aen_severity_lookup()`. printk(KERN_INFO "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", host, twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)), TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str, header->err_specific_desc); The AEN severity levels below exist. /* AEN severity table */ static char *twl_aen_severity_table[] = { "None", "ERROR", "WARNING", "INFO", "DEBUG", NULL }; It’s demoted from a warning to an informational message nevertheless to avoid adding if-else statements. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> --- v2: Fix KERN_ERROR to KERN_ERR drivers/scsi/3w-sas.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)