@@ -110,7 +110,7 @@ config RMI4_F3A
config RMI4_F54
bool "RMI4 Function 54 (Analog diagnostics)"
- depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
+ depends on VIDEO_DEV=y || (RMI4_CORE=m && VIDEO_DEV=m)
select VIDEOBUF2_VMALLOC
select RMI4_F55
help
@@ -131,7 +131,7 @@ config TOUCHSCREEN_ATMEL_MXT
config TOUCHSCREEN_ATMEL_MXT_T37
bool "Support T37 Diagnostic Data"
depends on TOUCHSCREEN_ATMEL_MXT
- depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m)
+ depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
select VIDEOBUF2_VMALLOC
help
Say Y here if you want support to output data from the T37
@@ -1252,7 +1252,7 @@ config TOUCHSCREEN_SUN4I
config TOUCHSCREEN_SUR40
tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_DMA_SG
help
Say Y here if you want support for the Samsung SUR40 touchscreen
@@ -160,6 +160,9 @@ menu "Media core support"
config VIDEO_DEV
tristate "Video4Linux core"
default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT || MEDIA_PLATFORM_SUPPORT || MEDIA_TEST_SUPPORT
+ depends on (I2C || I2C=n)
+ select RATIONAL
+ select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
help
Enables the V4L2 API, used by cameras, analog TV, video grabbers,
radio devices and by some input devices.
@@ -5,6 +5,6 @@ config VIDEO_SAA7146
config VIDEO_SAA7146_VV
tristate
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF_DMA_SG
select VIDEO_SAA7146
@@ -6,7 +6,7 @@
config DVB_MMAP
bool "Enable DVB memory-mapped API (EXPERIMENTAL)"
depends on DVB_CORE
- depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_CORE
+ depends on VIDEO_DEV=y || VIDEO_DEV=DVB_CORE
select VIDEOBUF2_VMALLOC
help
This option enables DVB experimental memory-mapped API, which
@@ -510,7 +510,7 @@ config DVB_RTL2832
config DVB_RTL2832_SDR
tristate "Realtek RTL2832 SDR"
- depends on DVB_CORE && I2C && I2C_MUX && VIDEO_V4L2 && MEDIA_SDR_SUPPORT && USB
+ depends on DVB_CORE && I2C && I2C_MUX && VIDEO_DEV && MEDIA_SDR_SUPPORT && USB
select DVB_RTL2832
select VIDEOBUF2_VMALLOC
default m if !MEDIA_SUBDRV_AUTOSELECT
@@ -681,7 +681,7 @@ config DVB_AU8522_DTV
config DVB_AU8522_V4L
tristate "Auvitek AU8522 based ATV demod"
- depends on VIDEO_V4L2 && DVB_CORE && I2C
+ depends on VIDEO_DEV && DVB_CORE && I2C
select DVB_AU8522
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -3,7 +3,7 @@
# Multimedia Video device configuration
#
-if VIDEO_V4L2
+if VIDEO_DEV
comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'"
depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE
@@ -36,7 +36,7 @@ menu "Audio decoders, processors and mixers"
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
@@ -48,7 +48,7 @@ config VIDEO_TVAUDIO
config VIDEO_TDA7432
tristate "Philips TDA7432 audio processor"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for tda7432 audio decoder chip found on some bt8xx boards.
@@ -66,7 +66,7 @@ config VIDEO_TDA9840
config VIDEO_TDA1997X
tristate "NXP TDA1997x HDMI receiver"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on SND_SOC
select HDMI
select SND_PCM
@@ -99,7 +99,7 @@ config VIDEO_TEA6420
config VIDEO_MSP3400
tristate "Micronas MSP34xx audio decoders"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Micronas MSP34xx series of audio decoders.
@@ -108,7 +108,7 @@ config VIDEO_MSP3400
config VIDEO_CS3308
tristate "Cirrus Logic CS3308 audio ADC"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Cirrus Logic CS3308 High Performance 8-Channel
Analog Volume Control
@@ -118,7 +118,7 @@ config VIDEO_CS3308
config VIDEO_CS5345
tristate "Cirrus Logic CS5345 audio ADC"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
stereo A/D converter.
@@ -128,7 +128,7 @@ config VIDEO_CS5345
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
@@ -138,7 +138,7 @@ config VIDEO_CS53L32A
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Texas Instruments TLV320AIC23B audio codec.
@@ -147,7 +147,7 @@ config VIDEO_TLV320AIC23B
config VIDEO_UDA1342
tristate "Philips UDA1342 audio codec"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Philips UDA1342 audio codec.
@@ -156,7 +156,7 @@ config VIDEO_UDA1342
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
@@ -166,7 +166,7 @@ config VIDEO_WM8775
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
@@ -176,7 +176,7 @@ config VIDEO_WM8739
config VIDEO_VP27SMPX
tristate "Panasonic VP27's internal MPX"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the internal MPX of the Panasonic VP27s tuner.
@@ -185,7 +185,7 @@ config VIDEO_VP27SMPX
config VIDEO_SONY_BTF_MPX
tristate "Sony BTF's internal MPX"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the internal MPX of the Sony BTF-PG472Z tuner.
@@ -198,7 +198,7 @@ menu "RDS decoders"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for this Radio Data System (RDS) decoder. This allows
@@ -214,7 +214,7 @@ menu "Video decoders"
config VIDEO_ADV7180
tristate "Analog Devices ADV7180 decoder"
- depends on GPIOLIB && VIDEO_V4L2 && I2C
+ depends on GPIOLIB && VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_ASYNC
@@ -226,7 +226,7 @@ config VIDEO_ADV7180
config VIDEO_ADV7183
tristate "Analog Devices ADV7183 decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
V4l2 subdevice driver for the Analog Devices
ADV7183 video decoder.
@@ -236,7 +236,7 @@ config VIDEO_ADV7183
config VIDEO_ADV748X
tristate "Analog Devices ADV748x decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on OF
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -251,7 +251,7 @@ config VIDEO_ADV748X
config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on GPIOLIB || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -277,7 +277,7 @@ config VIDEO_ADV7604_CEC
config VIDEO_ADV7842
tristate "Analog Devices ADV7842 decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select HDMI
@@ -300,7 +300,7 @@ config VIDEO_ADV7842_CEC
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for BT819A video decoder.
@@ -309,7 +309,7 @@ config VIDEO_BT819
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for BT856 video decoder.
@@ -318,7 +318,7 @@ config VIDEO_BT856
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for BT866 video decoder.
@@ -327,7 +327,7 @@ config VIDEO_BT866
config VIDEO_ISL7998X
tristate "Intersil ISL7998x video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on OF_GPIO
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -337,7 +337,7 @@ config VIDEO_ISL7998X
config VIDEO_KS0127
tristate "KS0127 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for KS0127 video decoder.
@@ -349,7 +349,7 @@ config VIDEO_KS0127
config VIDEO_ML86V7667
tristate "OKI ML86V7667 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the OKI Semiconductor ML86V7667 video decoder.
@@ -358,7 +358,7 @@ config VIDEO_ML86V7667
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Philips SAA7110 video decoders.
@@ -367,7 +367,7 @@ config VIDEO_SAA7110
config VIDEO_SAA711X
tristate "Philips SAA7111/3/4/5 video decoders"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Philips SAA7111/3/4/5 video decoders.
@@ -376,7 +376,7 @@ config VIDEO_SAA711X
config VIDEO_TC358743
tristate "Toshiba TC358743 decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select HDMI
@@ -397,7 +397,7 @@ config VIDEO_TC358743_CEC
config VIDEO_TVP514X
tristate "Texas Instruments TVP514x video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the TI TVP5146/47
@@ -409,7 +409,7 @@ config VIDEO_TVP514X
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_FWNODE
select REGMAP_I2C
help
@@ -420,7 +420,7 @@ config VIDEO_TVP5150
config VIDEO_TVP7002
tristate "Texas Instruments TVP7002 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_FWNODE
help
Support for the Texas Instruments TVP7002 video decoder.
@@ -430,7 +430,7 @@ config VIDEO_TVP7002
config VIDEO_TW2804
tristate "Techwell TW2804 multiple video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Techwell tw2804 multiple video decoder.
@@ -439,7 +439,7 @@ config VIDEO_TW2804
config VIDEO_TW9903
tristate "Techwell TW9903 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Techwell tw9903 multi-standard video decoder
with high quality down scaler.
@@ -449,7 +449,7 @@ config VIDEO_TW9903
config VIDEO_TW9906
tristate "Techwell TW9906 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Techwell tw9906 enhanced multi-standard comb filter
video decoder with YCbCr input support.
@@ -459,7 +459,7 @@ config VIDEO_TW9906
config VIDEO_TW9910
tristate "Techwell TW9910 video decoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_ASYNC
help
Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
@@ -469,7 +469,7 @@ config VIDEO_TW9910
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for VPX322x video decoders.
@@ -479,7 +479,7 @@ config VIDEO_VPX3220
config VIDEO_MAX9286
tristate "Maxim MAX9286 GMSL deserializer support"
depends on I2C && I2C_MUX
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on OF_GPIO
select V4L2_FWNODE
select VIDEO_V4L2_SUBDEV_API
@@ -494,7 +494,7 @@ comment "Video and audio decoders"
config VIDEO_SAA717X
tristate "Philips SAA7171/3/4 audio/video decoders"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Philips SAA7171/3/4 audio/video decoders.
@@ -510,7 +510,7 @@ menu "Video encoders"
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Philips SAA7127/9 digital video encoders.
@@ -519,7 +519,7 @@ config VIDEO_SAA7127
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Philips SAA7185 video encoder.
@@ -528,7 +528,7 @@ config VIDEO_SAA7185
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Analog Devices ADV7170 video encoder driver
@@ -537,7 +537,7 @@ config VIDEO_ADV7170
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Analog Devices ADV7175 video encoder driver
@@ -565,7 +565,7 @@ config VIDEO_ADV7393
config VIDEO_ADV7511
tristate "Analog Devices ADV7511 encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on DRM_I2C_ADV7511=n || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -588,7 +588,7 @@ config VIDEO_ADV7511_CEC
config VIDEO_AD9389B
tristate "Analog Devices AD9389B encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -608,7 +608,7 @@ config VIDEO_AK881X
config VIDEO_THS8200
tristate "Texas Instruments THS8200 video encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_ASYNC
help
Support for the Texas Instruments THS8200 video encoder.
@@ -622,7 +622,7 @@ menu "Video improvement chips"
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_ASYNC
help
Support for the NEC Electronics uPD64031A Ghost Reduction
@@ -635,7 +635,7 @@ config VIDEO_UPD64031A
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
@@ -650,7 +650,7 @@ menu "Audio/Video compression chips"
config VIDEO_SAA6752HS
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select CRC32
help
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
@@ -666,7 +666,7 @@ menu "SDR tuner chips"
config SDR_MAX2175
tristate "Maxim 2175 RF to Bits tuner"
- depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
+ depends on VIDEO_DEV && MEDIA_SDR_SUPPORT && I2C
select REGMAP_I2C
select V4L2_ASYNC
help
@@ -684,7 +684,7 @@ menu "Miscellaneous helper chips"
config VIDEO_THS7303
tristate "THS7303/53 Video Amplifier"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select V4L2_ASYNC
help
Support for TI THS7303/53 video amplifier
@@ -694,7 +694,7 @@ config VIDEO_THS7303
config VIDEO_M52790
tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Mitsubishi M52790 A/V switch.
@@ -703,7 +703,7 @@ config VIDEO_M52790
config VIDEO_I2C
tristate "I2C transport video support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select VIDEOBUF2_VMALLOC
imply HWMON
help
@@ -717,7 +717,7 @@ config VIDEO_I2C
config VIDEO_ST_MIPID02
tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -745,7 +745,7 @@ config VIDEO_CCS_PLL
config VIDEO_HI556
tristate "Hynix Hi-556 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -758,7 +758,7 @@ config VIDEO_HI556
config VIDEO_HI846
tristate "Hynix Hi-846 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -771,7 +771,7 @@ config VIDEO_HI846
config VIDEO_HI847
tristate "Hynix Hi-847 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -784,7 +784,7 @@ config VIDEO_HI847
config VIDEO_IMX208
tristate "Sony IMX208 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_DEV && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
help
This is a Video4Linux2 sensor driver for the Sony
@@ -795,7 +795,7 @@ config VIDEO_IMX208
config VIDEO_IMX214
tristate "Sony IMX214 sensor support"
- depends on GPIOLIB && I2C && VIDEO_V4L2
+ depends on GPIOLIB && I2C && VIDEO_DEV
select V4L2_FWNODE
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -809,7 +809,7 @@ config VIDEO_IMX214
config VIDEO_IMX219
tristate "Sony IMX219 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -822,7 +822,7 @@ config VIDEO_IMX219
config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -834,7 +834,7 @@ config VIDEO_IMX258
config VIDEO_IMX274
tristate "Sony IMX274 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
@@ -844,7 +844,7 @@ config VIDEO_IMX274
config VIDEO_IMX290
tristate "Sony IMX290 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
@@ -858,7 +858,7 @@ config VIDEO_IMX290
config VIDEO_IMX319
tristate "Sony IMX319 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -871,7 +871,7 @@ config VIDEO_IMX319
config VIDEO_IMX334
tristate "Sony IMX334 sensor support"
depends on OF_GPIO
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select VIDEO_V4L2_SUBDEV_API
select MEDIA_CONTROLLER
select V4L2_FWNODE
@@ -885,7 +885,7 @@ config VIDEO_IMX334
config VIDEO_IMX335
tristate "Sony IMX335 sensor support"
depends on OF_GPIO
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select VIDEO_V4L2_SUBDEV_API
select MEDIA_CONTROLLER
select V4L2_FWNODE
@@ -898,7 +898,7 @@ config VIDEO_IMX335
config VIDEO_IMX355
tristate "Sony IMX355 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -911,7 +911,7 @@ config VIDEO_IMX355
config VIDEO_IMX412
tristate "Sony IMX412 sensor support"
depends on OF_GPIO
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select VIDEO_V4L2_SUBDEV_API
select MEDIA_CONTROLLER
select V4L2_FWNODE
@@ -924,7 +924,7 @@ config VIDEO_IMX412
config VIDEO_OG01A1B
tristate "OmniVision OG01A1B sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -937,7 +937,7 @@ config VIDEO_OG01A1B
config VIDEO_OV02A10
tristate "OmniVision OV02A10 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -950,7 +950,7 @@ config VIDEO_OV02A10
config VIDEO_OV08D10
tristate "OmniVision OV08D10 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -963,7 +963,7 @@ config VIDEO_OV08D10
config VIDEO_OV2640
tristate "OmniVision OV2640 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
This is a Video4Linux2 sensor driver for the OmniVision
OV2640 camera.
@@ -973,7 +973,7 @@ config VIDEO_OV2640
config VIDEO_OV2659
tristate "OmniVision OV2659 sensor support"
- depends on VIDEO_V4L2 && I2C && GPIOLIB
+ depends on VIDEO_DEV && I2C && GPIOLIB
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -984,7 +984,7 @@ config VIDEO_OV2659
config VIDEO_OV2680
tristate "OmniVision OV2680 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select V4L2_FWNODE
help
@@ -996,7 +996,7 @@ config VIDEO_OV2680
config VIDEO_OV2685
tristate "OmniVision OV2685 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select V4L2_FWNODE
help
@@ -1008,7 +1008,7 @@ config VIDEO_OV2685
config VIDEO_OV2740
tristate "OmniVision OV2740 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on ACPI || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -1024,7 +1024,7 @@ config VIDEO_OV2740
config VIDEO_OV5640
tristate "OmniVision OV5640 sensor support"
depends on OF
- depends on GPIOLIB && VIDEO_V4L2 && I2C
+ depends on GPIOLIB && VIDEO_DEV && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1035,7 +1035,7 @@ config VIDEO_OV5640
config VIDEO_OV5645
tristate "OmniVision OV5645 sensor support"
depends on OF
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1048,7 +1048,7 @@ config VIDEO_OV5645
config VIDEO_OV5647
tristate "OmniVision OV5647 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1061,7 +1061,7 @@ config VIDEO_OV5647
config VIDEO_OV5648
tristate "OmniVision OV5648 sensor support"
- depends on I2C && PM && VIDEO_V4L2
+ depends on I2C && PM && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1074,7 +1074,7 @@ config VIDEO_OV5648
config VIDEO_OV6650
tristate "OmniVision OV6650 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor driver for the OmniVision
OV6650 camera.
@@ -1084,7 +1084,7 @@ config VIDEO_OV6650
config VIDEO_OV5670
tristate "OmniVision OV5670 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1097,7 +1097,7 @@ config VIDEO_OV5670
config VIDEO_OV5675
tristate "OmniVision OV5675 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1110,7 +1110,7 @@ config VIDEO_OV5675
config VIDEO_OV5693
tristate "OmniVision OV5693 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -1121,7 +1121,7 @@ config VIDEO_OV5693
config VIDEO_OV5695
tristate "OmniVision OV5695 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -1132,7 +1132,7 @@ config VIDEO_OV5695
config VIDEO_OV7251
tristate "OmniVision OV7251 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1145,7 +1145,7 @@ config VIDEO_OV7251
config VIDEO_OV772X
tristate "OmniVision OV772x sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select REGMAP_SCCB
select V4L2_FWNODE
help
@@ -1157,7 +1157,7 @@ config VIDEO_OV772X
config VIDEO_OV7640
tristate "OmniVision OV7640 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7640 camera.
@@ -1167,7 +1167,7 @@ config VIDEO_OV7640
config VIDEO_OV7670
tristate "OmniVision OV7670 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -1176,7 +1176,7 @@ config VIDEO_OV7670
config VIDEO_OV7740
tristate "OmniVision OV7740 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select REGMAP_SCCB
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -1184,7 +1184,7 @@ config VIDEO_OV7740
config VIDEO_OV8856
tristate "OmniVision OV8856 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1197,7 +1197,7 @@ config VIDEO_OV8856
config VIDEO_OV8865
tristate "OmniVision OV8865 sensor support"
- depends on I2C && PM && VIDEO_V4L2
+ depends on I2C && PM && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1211,7 +1211,7 @@ config VIDEO_OV8865
config VIDEO_OV9282
tristate "OmniVision OV9282 sensor support"
depends on OF_GPIO
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select VIDEO_V4L2_SUBDEV_API
select MEDIA_CONTROLLER
select V4L2_FWNODE
@@ -1224,14 +1224,14 @@ config VIDEO_OV9282
config VIDEO_OV9640
tristate "OmniVision OV9640 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor driver for the OmniVision
OV9640 camera sensor.
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select REGMAP_SCCB
@@ -1241,7 +1241,7 @@ config VIDEO_OV9650
config VIDEO_OV9734
tristate "OmniVision OV9734 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on ACPI || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -1255,7 +1255,7 @@ config VIDEO_OV9734
config VIDEO_OV13858
tristate "OmniVision OV13858 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1265,7 +1265,7 @@ config VIDEO_OV13858
config VIDEO_OV13B10
tristate "OmniVision OV13B10 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1275,7 +1275,7 @@ config VIDEO_OV13B10
config VIDEO_VS6624
tristate "ST VS6624 sensor support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
This is a Video4Linux2 sensor driver for the ST VS6624
camera.
@@ -1285,7 +1285,7 @@ config VIDEO_VS6624
config VIDEO_MT9M001
tristate "mt9m001 support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -1294,7 +1294,7 @@ config VIDEO_MT9M001
config VIDEO_MT9M032
tristate "MT9M032 camera sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEO_APTINA_PLL
@@ -1304,7 +1304,7 @@ config VIDEO_MT9M032
config VIDEO_MT9M111
tristate "mt9m111, mt9m112 and mt9m131 support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select V4L2_FWNODE
help
This driver supports MT9M111, MT9M112 and MT9M131 cameras from
@@ -1312,7 +1312,7 @@ config VIDEO_MT9M111
config VIDEO_MT9P031
tristate "Aptina MT9P031 support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEO_APTINA_PLL
@@ -1323,7 +1323,7 @@ config VIDEO_MT9P031
config VIDEO_MT9T001
tristate "Aptina MT9T001 support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -1332,7 +1332,7 @@ config VIDEO_MT9T001
config VIDEO_MT9T112
tristate "Aptina MT9T111/MT9T112 support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) MT9T111 and MT9T112 3 Mpixel camera.
@@ -1342,7 +1342,7 @@ config VIDEO_MT9T112
config VIDEO_MT9V011
tristate "Micron mt9v011 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor driver for the Micron
mt0v011 1.3 Mpixel camera. It currently only works with the
@@ -1350,7 +1350,7 @@ config VIDEO_MT9V011
config VIDEO_MT9V032
tristate "Micron MT9V032 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
@@ -1361,7 +1361,7 @@ config VIDEO_MT9V032
config VIDEO_MT9V111
tristate "Aptina MT9V111 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor driver for the Aptina/Micron
MT9V111 sensor.
@@ -1371,13 +1371,13 @@ config VIDEO_MT9V111
config VIDEO_SR030PC30
tristate "Siliconfile SR030PC30 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This driver supports SR030PC30 VGA camera from Siliconfile
config VIDEO_NOON010PC30
tristate "Siliconfile NOON010PC30 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -1418,7 +1418,7 @@ config VIDEO_RDACM21
config VIDEO_RJ54N1
tristate "Sharp RJ54N1CB0C sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
sensor.
@@ -1428,7 +1428,7 @@ config VIDEO_RJ54N1
config VIDEO_S5K6AA
tristate "Samsung S5K6AAFX sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -1437,7 +1437,7 @@ config VIDEO_S5K6AA
config VIDEO_S5K6A3
tristate "Samsung S5K6A3 sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -1446,7 +1446,7 @@ config VIDEO_S5K6A3
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select CRC32
@@ -1456,7 +1456,7 @@ config VIDEO_S5K4ECGX
config VIDEO_S5K5BAF
tristate "Samsung S5K5BAF sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1469,7 +1469,7 @@ source "drivers/media/i2c/et8ek8/Kconfig"
config VIDEO_S5C73M3
tristate "Samsung S5C73M3 sensor support"
- depends on I2C && SPI && VIDEO_V4L2
+ depends on I2C && SPI && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1484,7 +1484,7 @@ menu "Lens drivers"
config VIDEO_AD5820
tristate "AD5820 lens voice coil support"
- depends on GPIOLIB && I2C && VIDEO_V4L2
+ depends on GPIOLIB && I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select V4L2_ASYNC
help
@@ -1493,7 +1493,7 @@ config VIDEO_AD5820
config VIDEO_AK7375
tristate "AK7375 lens voice coil support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_ASYNC
@@ -1505,7 +1505,7 @@ config VIDEO_AK7375
config VIDEO_DW9714
tristate "DW9714 lens voice coil support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_ASYNC
@@ -1517,7 +1517,7 @@ config VIDEO_DW9714
config VIDEO_DW9768
tristate "DW9768 lens voice coil support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1529,7 +1529,7 @@ config VIDEO_DW9768
config VIDEO_DW9807_VCM
tristate "DW9807 lens voice coil support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_ASYNC
@@ -1546,7 +1546,7 @@ menu "Flash devices"
config VIDEO_ADP1653
tristate "ADP1653 flash support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select V4L2_ASYNC
help
@@ -1555,7 +1555,7 @@ config VIDEO_ADP1653
config VIDEO_LM3560
tristate "LM3560 dual flash driver support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select REGMAP_I2C
select V4L2_ASYNC
@@ -1565,7 +1565,7 @@ config VIDEO_LM3560
config VIDEO_LM3646
tristate "LM3646 dual flash driver support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select REGMAP_I2C
select V4L2_ASYNC
@@ -1574,4 +1574,4 @@ config VIDEO_LM3646
flash, torch LEDs.
endmenu
-endif # VIDEO_V4L2
+endif # VIDEO_DEV
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_CCS
tristate "MIPI CCS/SMIA++/SMIA sensor support"
- depends on I2C && VIDEO_V4L2 && HAVE_CLK
+ depends on I2C && VIDEO_DEV && HAVE_CLK
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEO_CCS_PLL
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_CX25840
tristate "Conexant CX2584x audio/video decoders"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
Support for the Conexant CX2584x audio/video decoders.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_ET8EK8
tristate "ET8EK8 camera sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_M5MOLS
tristate "Fujitsu M-5MOLS 8MP sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -61,7 +61,7 @@ config VIDEO_PCI_SKELETON
tristate "Skeleton PCI V4L2 driver"
depends on SAMPLES
depends on MEDIA_TEST_SUPPORT
- depends on PCI && VIDEO_V4L2
+ depends on PCI && VIDEO_DEV
select VIDEOBUF2_MEMOPS
select VIDEOBUF2_DMA_CONTIG
help
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_BT848
tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
+ depends on PCI && I2C && VIDEO_DEV
select I2C_ALGOBIT
select VIDEOBUF_DMA_SG
depends on RC_CORE
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_COBALT
tristate "Cisco Cobalt support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on PCI_MSI && MTD_COMPLEX_MAPPINGS
depends on (GPIOLIB && DRM_I2C_ADV7511=n) || COMPILE_TEST
depends on SND
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_CX18
tristate "Conexant cx23418 MPEG encoder support"
- depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C
+ depends on VIDEO_DEV && DVB_CORE && PCI && I2C
select I2C_ALGOBIT
select VIDEOBUF_VMALLOC
depends on RC_CORE
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_DT3155
tristate "DT3155 frame grabber"
- depends on PCI && VIDEO_DEV && VIDEO_V4L2
+ depends on PCI && VIDEO_DEV
select VIDEOBUF2_DMA_CONTIG
help
Enables dt3155 device driver for the DataTranslation DT3155 frame grabber.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_IPU3_CIO2
tristate "Intel ipu3-cio2 driver"
- depends on VIDEO_V4L2 && PCI
+ depends on VIDEO_DEV && PCI
depends on ACPI || COMPILE_TEST
depends on X86
select MEDIA_CONTROLLER
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
- depends on VIDEO_V4L2 && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C
select I2C_ALGOBIT
depends on RC_CORE
select VIDEO_TUNER
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on PCI && VIDEO_V4L2
+ depends on PCI && VIDEO_DEV
depends on SONY_LAPTOP
depends on X86 || COMPILE_TEST
help
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on PCI && VIDEO_V4L2 && I2C
+ depends on PCI && VIDEO_DEV && I2C
select VIDEO_SAA7146_VV
help
This is a video4linux driver for the Hexium Gemini frame
@@ -13,7 +13,7 @@ config VIDEO_HEXIUM_GEMINI
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on PCI && VIDEO_V4L2 && I2C
+ depends on PCI && VIDEO_DEV && I2C
select VIDEO_SAA7146_VV
help
This is a video4linux driver for the Hexium HV-PCI6 and
@@ -24,7 +24,7 @@ config VIDEO_HEXIUM_ORION
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on PCI && VIDEO_V4L2 && I2C
+ depends on PCI && VIDEO_DEV && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config STA2X11_VIP
tristate "STA2X11 VIP Video For Linux"
- depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS && I2C
+ depends on PCI && VIDEO_DEV && VIRT_TO_BUS && I2C
depends on STA2X11 || COMPILE_TEST
select GPIOLIB if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_TW5864
tristate "Techwell TW5864 video/audio grabber and encoder"
- depends on VIDEO_DEV && PCI && VIDEO_V4L2
+ depends on VIDEO_DEV && PCI
select VIDEOBUF2_DMA_CONTIG
help
Support for boards based on Techwell TW5864 chip which provides
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_TW68
tristate "Techwell tw68x Video For Linux"
- depends on VIDEO_DEV && PCI && VIDEO_V4L2
+ depends on VIDEO_DEV && PCI
select VIDEOBUF2_DMA_SG
help
Support for Techwell tw68xx based frame grabber boards.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_TW686X
tristate "Intersil/Techwell TW686x video capture cards"
- depends on PCI && VIDEO_DEV && VIDEO_V4L2 && SND
+ depends on PCI && VIDEO_DEV && SND
select VIDEOBUF2_VMALLOC
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_DMA_SG
@@ -30,7 +30,7 @@ config DVB_PLATFORM_DRIVERS
config V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
help
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
@@ -42,7 +42,7 @@ config V4L_MEM2MEM_DRIVERS
config VIDEO_MEM2MEM_DEINTERLACE
tristate "Deinterlace support"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -53,7 +53,7 @@ config VIDEO_MUX
tristate "Video Multiplexer"
depends on V4L_PLATFORM_DRIVERS
select MULTIPLEXER
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select REGMAP
@@ -5,7 +5,7 @@ comment "Allegro DVT drivers"
config VIDEO_ALLEGRO_DVT
tristate "Allegro DVT Video IP Core"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_ZYNQMP || COMPILE_TEST
select V4L2_MEM2MEM_DEV
select VIDEOBUF2_DMA_CONTIG
@@ -3,7 +3,7 @@
config VIDEO_SUN4I_CSI
tristate "Allwinner A10 CMOS Sensor Interface Support"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && COMMON_CLK && HAS_DMA
+ depends on VIDEO_DEV && COMMON_CLK && HAS_DMA
depends on ARCH_SUNXI || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -2,7 +2,7 @@
config VIDEO_SUN6I_CSI
tristate "Allwinner V3s Camera Sensor Interface driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && COMMON_CLK && HAS_DMA
+ depends on VIDEO_DEV && COMMON_CLK && HAS_DMA
depends on ARCH_SUNXI || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -2,7 +2,7 @@
config VIDEO_SUN8I_DEINTERLACE
tristate "Allwinner Deinterlace driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_SUNXI || COMPILE_TEST
depends on COMMON_CLK && OF
depends on PM
@@ -3,7 +3,7 @@
config VIDEO_SUN8I_ROTATE
tristate "Allwinner DE2 rotation driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_SUNXI || COMPILE_TEST
depends on COMMON_CLK && OF
depends on PM
@@ -1,7 +1,7 @@
config VIDEO_MESON_GE2D
tristate "Amlogic 2D Graphic Acceleration Unit"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_MESON || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -8,7 +8,6 @@ config VIDEO_AMPHION_VPU
depends on ARCH_MXC || COMPILE_TEST
depends on MEDIA_SUPPORT
depends on VIDEO_DEV
- depends on VIDEO_V4L2
select MEDIA_CONTROLLER
select V4L2_MEM2MEM_DEV
select VIDEOBUF2_DMA_CONTIG
@@ -5,7 +5,7 @@ comment "Aspeed drivers"
config VIDEO_ASPEED
tristate "Aspeed AST2400 and AST2500 Video Engine driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_DMA_CONTIG
help
Support for the Aspeed Video Engine (VE) embedded in the Aspeed
@@ -5,7 +5,7 @@ comment "Atmel drivers"
config VIDEO_ATMEL_ISC
tristate "ATMEL Image Sensor Controller (ISC) support"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && COMMON_CLK
+ depends on VIDEO_DEV && COMMON_CLK
depends on ARCH_AT91 || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -20,7 +20,7 @@ config VIDEO_ATMEL_ISC
config VIDEO_ATMEL_XISC
tristate "ATMEL eXtended Image Sensor Controller (XISC) support"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_DEV && COMMON_CLK && VIDEO_V4L2_SUBDEV_API
depends on ARCH_AT91 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select REGMAP_MMIO
@@ -39,7 +39,7 @@ config VIDEO_ATMEL_ISC_BASE
config VIDEO_ATMEL_ISI
tristate "ATMEL Image Sensor Interface (ISI) support"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
depends on ARCH_AT91 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
@@ -50,7 +50,7 @@ config VIDEO_ATMEL_ISI
config VIDEO_MICROCHIP_CSI2DC
tristate "Microchip CSI2 Demux Controller"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && COMMON_CLK && OF
+ depends on VIDEO_DEV && COMMON_CLK && OF
depends on ARCH_AT91 || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -4,7 +4,7 @@ comment "Cadence drivers"
config VIDEO_CADENCE_CSI2RX
tristate "Cadence MIPI-CSI2 RX Controller"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -16,7 +16,7 @@ config VIDEO_CADENCE_CSI2RX
config VIDEO_CADENCE_CSI2TX
tristate "Cadence MIPI-CSI2 TX Controller"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
@@ -5,7 +5,7 @@ comment "Chips&Media drivers"
config VIDEO_CODA
tristate "Chips&Media Coda multi-standard codec IP"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2 && OF && (ARCH_MXC || COMPILE_TEST)
+ depends on VIDEO_DEV && OF && (ARCH_MXC || COMPILE_TEST)
select SRAM
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
@@ -5,7 +5,7 @@ comment "Intel drivers"
config VIDEO_PXA27x
tristate "PXA27x Quick Capture Interface driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on PXA27x || COMPILE_TEST
select VIDEOBUF2_DMA_SG
select SG_SPLIT
@@ -5,7 +5,7 @@ comment "Marvell drivers"
config VIDEO_CAFE_CCIC
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
depends on V4L_PLATFORM_DRIVERS
- depends on PCI && I2C && VIDEO_V4L2
+ depends on PCI && I2C && VIDEO_DEV
depends on COMMON_CLK
select VIDEO_OV7670
select VIDEOBUF2_VMALLOC
@@ -19,7 +19,7 @@ config VIDEO_CAFE_CCIC
config VIDEO_MMP_CAMERA
tristate "Marvell Armada 610 integrated camera controller support"
depends on V4L_PLATFORM_DRIVERS
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
depends on ARCH_MMP || COMPILE_TEST
depends on COMMON_CLK
select VIDEO_OV7670
@@ -3,7 +3,7 @@ config VIDEO_MEDIATEK_JPEG
tristate "Mediatek JPEG Codec driver"
depends on V4L_MEM2MEM_DRIVERS
depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
@@ -3,7 +3,7 @@ config VIDEO_MEDIATEK_MDP
tristate "Mediatek MDP driver"
depends on V4L_MEM2MEM_DRIVERS
depends on MTK_IOMMU || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
@@ -9,7 +9,7 @@ config VIDEO_MEDIATEK_VCODEC
tristate "Mediatek Video Codec driver"
depends on V4L_MEM2MEM_DRIVERS
depends on MTK_IOMMU || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on VIDEO_MEDIATEK_VPU || MTK_SCP
# The two following lines ensure we have the same state ("m" or "y") as
@@ -3,7 +3,7 @@
config VIDEO_MEDIATEK_VPU
tristate "Mediatek Video Processor Unit"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_MEDIATEK || COMPILE_TEST
help
This driver provides downloading VPU firmware and
@@ -2,7 +2,7 @@ config VIDEO_TEGRA_VDE
tristate "NVIDIA Tegra Video Decoder Engine driver"
depends on V4L_MEM2MEM_DRIVERS
depends on ARCH_TEGRA || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select DMA_SHARED_BUFFER
select IOMMU_IOVA
select MEDIA_CONTROLLER
@@ -17,7 +17,7 @@ config VIDEO_IMX_MIPI_CSIS
config VIDEO_VIU
tristate "NXP VIU Video Driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C
+ depends on VIDEO_DEV && (PPC_MPC512x || COMPILE_TEST) && I2C
select VIDEOBUF_DMA_CONTIG
default y
help
@@ -32,7 +32,7 @@ config VIDEO_VIU
config VIDEO_IMX_PXP
tristate "NXP i.MX Pixel Pipeline (PXP)"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST)
+ depends on VIDEO_DEV && (ARCH_MXC || COMPILE_TEST)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
@@ -42,7 +42,7 @@ config VIDEO_IMX_PXP
config VIDEO_MX2_EMMAPRP
tristate "NXP MX2 eMMa-PrP support"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on SOC_IMX27 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -3,7 +3,7 @@ config VIDEO_IMX8_JPEG
tristate "IMX8 JPEG Encoder/Decoder"
depends on V4L_MEM2MEM_DRIVERS
depends on ARCH_MXC || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select V4L2_JPEG_HELPER
@@ -1,7 +1,7 @@
config VIDEO_QCOM_CAMSS
tristate "Qualcomm V4L2 Camera Subsystem driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -1,7 +1,7 @@
config VIDEO_QCOM_VENUS
tristate "Qualcomm Venus V4L2 encoder/decoder driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2 && QCOM_SMEM
+ depends on VIDEO_DEV && QCOM_SMEM
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
select QCOM_MDT_LOADER if ARCH_QCOM
select QCOM_SCM
@@ -4,10 +4,20 @@ comment "Renesas drivers"
# V4L drivers
+config VIDEO_RENESAS_CEU
+ tristate "Renesas Capture Engine Unit (CEU) driver"
+ depends on V4L_PLATFORM_DRIVERS
+ depends on VIDEO_DEV
+ depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_FWNODE
+ help
+ This is a v4l2 driver for the Renesas CEU Interface
+
config VIDEO_RCAR_ISP
tristate "R-Car Image Signal Processor (ISP)"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
depends on ARCH_RENESAS || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -21,16 +31,6 @@ config VIDEO_RCAR_ISP
To compile this driver as a module, choose M here: the
module will be called rcar-isp.
-config VIDEO_RENESAS_CEU
- tristate "Renesas Capture Engine Unit (CEU) driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_FWNODE
- help
- This is a v4l2 driver for the Renesas CEU Interface
-
config VIDEO_SH_VOU
tristate "SuperH VOU video output driver"
depends on V4L_PLATFORM_DRIVERS
@@ -61,7 +61,7 @@ config VIDEO_RENESAS_FCP
config VIDEO_RENESAS_FDP1
tristate "Renesas Fine Display Processor"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_RENESAS || COMPILE_TEST
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select VIDEOBUF2_DMA_CONTIG
@@ -76,7 +76,7 @@ config VIDEO_RENESAS_FDP1
config VIDEO_RENESAS_JPU
tristate "Renesas JPEG Processing Unit"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -89,7 +89,7 @@ config VIDEO_RENESAS_JPU
config VIDEO_RENESAS_VSP1
tristate "Renesas VSP1 Video Processing Engine"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_RENESAS || COMPILE_TEST
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select MEDIA_CONTROLLER
@@ -107,7 +107,7 @@ config VIDEO_RENESAS_VSP1
config VIDEO_RCAR_DRIF
tristate "Renesas Digital Radio Interface (DRIF)"
depends on SDR_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_VMALLOC
select V4L2_ASYNC
@@ -2,7 +2,7 @@
config VIDEO_RCAR_CSI2
tristate "R-Car MIPI CSI-2 Receiver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
depends on ARCH_RENESAS || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -18,7 +18,7 @@ config VIDEO_RCAR_CSI2
config VIDEO_RCAR_VIN
tristate "R-Car Video Input (VIN) Driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
depends on ARCH_RENESAS || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -1,7 +1,7 @@
config VIDEO_ROCKCHIP_RGA
tristate "Rockchip Raster 2d Graphic Acceleration Unit"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_ROCKCHIP || COMPILE_TEST
select VIDEOBUF2_DMA_SG
select V4L2_MEM2MEM_DEV
@@ -2,7 +2,7 @@
config VIDEO_ROCKCHIP_ISP1
tristate "Rockchip Image Signal Processing v1 Unit driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
depends on ARCH_ROCKCHIP || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -2,7 +2,7 @@
config VIDEO_SAMSUNG_EXYNOS_GSC
tristate "Samsung Exynos G-Scaler driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -3,7 +3,7 @@
config VIDEO_SAMSUNG_EXYNOS4_IS
tristate "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF && COMMON_CLK
+ depends on VIDEO_DEV && OF && COMMON_CLK
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -2,7 +2,7 @@
config VIDEO_S3C_CAMIF
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && I2C && PM
+ depends on VIDEO_DEV && I2C && PM
depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -1,7 +1,7 @@
config VIDEO_SAMSUNG_S5P_G2D
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -3,7 +3,7 @@
config VIDEO_SAMSUNG_S5P_JPEG
tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -2,7 +2,7 @@
config VIDEO_SAMSUNG_S5P_MFC
tristate "Samsung S5P MFC Video Codec"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
help
@@ -2,7 +2,7 @@
config VIDEO_STI_BDISP
tristate "STMicroelectronics BDISP 2D blitter driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_STI || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -2,7 +2,7 @@
config VIDEO_STI_DELTA
tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_STI || COMPILE_TEST
help
This V4L2 driver enables DELTA multi-format video decoder
@@ -2,7 +2,7 @@
config VIDEO_STI_HVA
tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_STI || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -4,7 +4,7 @@
config VIDEO_STM32_DCMI
tristate "STM32 Digital Camera Memory Interface (DCMI) support"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_DEV && OF
depends on ARCH_STM32 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select MEDIA_CONTROLLER
@@ -20,7 +20,7 @@ config VIDEO_STM32_DCMI
config VIDEO_STM32_DMA2D
tristate "STM32 Chrom-Art Accelerator (DMA2D)"
depends on V4L_MEM2MEM_DRIVERS
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_STM32 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -2,7 +2,7 @@
config VIDEO_AM437X_VPFE
tristate "TI AM437x VPFE video capture driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on SOC_AM43XX || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -2,7 +2,7 @@
config VIDEO_DAVINCI_VPIF_DISPLAY
tristate "TI DaVinci VPIF V4L2-Display driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_DAVINCI || COMPILE_TEST
depends on I2C
select VIDEOBUF2_DMA_CONTIG
@@ -19,7 +19,7 @@ config VIDEO_DAVINCI_VPIF_DISPLAY
config VIDEO_DAVINCI_VPIF_CAPTURE
tristate "TI DaVinci VPIF video capture driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_DAVINCI || COMPILE_TEST
depends on I2C
select VIDEOBUF2_DMA_CONTIG
@@ -35,7 +35,7 @@ config VIDEO_DAVINCI_VPIF_CAPTURE
config VIDEO_DM6446_CCDC
tristate "TI DM6446 CCDC video capture driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_DAVINCI || COMPILE_TEST
depends on I2C
select VIDEOBUF_DMA_CONTIG
@@ -52,7 +52,7 @@ config VIDEO_DM6446_CCDC
config VIDEO_DM355_CCDC
tristate "TI DM355 CCDC video capture driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_DAVINCI || COMPILE_TEST
depends on I2C
select VIDEOBUF_DMA_CONTIG
@@ -69,7 +69,7 @@ config VIDEO_DM355_CCDC
config VIDEO_DM365_ISIF
tristate "TI DM365 ISIF video capture driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_DAVINCI || COMPILE_TEST
depends on I2C
select VIDEOBUF_DMA_CONTIG
@@ -84,7 +84,7 @@ config VIDEO_DM365_ISIF
config VIDEO_DAVINCI_VPBE_DISPLAY
tristate "TI DaVinci VPBE V4L2-Display driver"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on ARCH_DAVINCI || COMPILE_TEST
depends on I2C
select VIDEOBUF2_DMA_CONTIG
@@ -10,7 +10,7 @@ config VIDEO_OMAP2_VOUT
depends on MMU
depends on FB_OMAP2 || (COMPILE_TEST && FB_OMAP2=n)
depends on ARCH_OMAP2 || ARCH_OMAP3 || COMPILE_TEST
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_DMA_CONTIG
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
help
@@ -2,7 +2,7 @@
config VIDEO_OMAP3
tristate "OMAP 3 Camera support"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST
depends on COMMON_CLK && OF
select ARM_DMA_USE_IOMMU if OMAP_IOMMU
@@ -5,7 +5,7 @@ comment "VIA drivers"
config VIDEO_VIA_CAMERA
tristate "VIAFB camera controller support"
depends on V4L_PLATFORM_DRIVERS
- depends on FB_VIA && VIDEO_V4L2
+ depends on FB_VIA && VIDEO_DEV
select VIDEOBUF2_DMA_SG
select VIDEO_OV7670
help
@@ -5,7 +5,7 @@ comment "Xilinx drivers"
config VIDEO_XILINX
tristate "Xilinx Video IP (EXPERIMENTAL)"
depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_V4L2 && OF && HAS_DMA
+ depends on VIDEO_DEV && OF && HAS_DMA
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
@@ -5,13 +5,13 @@
menuconfig RADIO_ADAPTERS
bool "Radio Adapters"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on MEDIA_RADIO_SUPPORT
default y
help
Say Y here to enable selecting AM/FM radio adapters.
-if RADIO_ADAPTERS && VIDEO_V4L2
+if RADIO_ADAPTERS
config RADIO_TEA575X
tristate
@@ -20,13 +20,12 @@ source "drivers/media/radio/si470x/Kconfig"
config RADIO_SI4713
tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
- depends on VIDEO_V4L2
source "drivers/media/radio/si4713/Kconfig"
config RADIO_SI476X
tristate "Silicon Laboratories Si476x I2C FM Radio"
- depends on I2C && VIDEO_V4L2
+ depends on I2C
depends on MFD_SI476X_CORE
depends on SND_SOC
select SND_SOC_SI476X
@@ -43,7 +42,7 @@ config RADIO_SI476X
config USB_MR800
tristate "AverMedia MR 800 USB FM radio support"
- depends on USB && VIDEO_V4L2
+ depends on USB
help
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -55,7 +54,7 @@ config USB_MR800
config USB_DSBR
tristate "D-Link/GemTek USB FM radio support"
- depends on USB && VIDEO_V4L2
+ depends on USB
help
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -67,7 +66,7 @@ config USB_DSBR
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_V4L2 && PCI
+ depends on PCI
select RADIO_TEA575X
help
Choose Y here if you have this radio card. This card may also be
@@ -118,7 +117,7 @@ config RADIO_SHARK2
config USB_KEENE
tristate "Keene FM Transmitter USB support"
- depends on USB && VIDEO_V4L2
+ depends on USB
help
Say Y here if you want to connect this type of FM transmitter
to your computer's USB port.
@@ -128,7 +127,7 @@ config USB_KEENE
config USB_RAREMONO
tristate "Thanko's Raremono AM/FM/SW radio support"
- depends on USB && VIDEO_V4L2
+ depends on USB
help
The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
It is one of the very few or perhaps the only consumer USB radio device
@@ -142,7 +141,7 @@ config USB_RAREMONO
config USB_MA901
tristate "Masterkit MA901 USB FM radio support"
- depends on USB && VIDEO_V4L2
+ depends on USB
help
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -154,7 +153,7 @@ config USB_MA901
config RADIO_TEA5764
tristate "TEA5764 I2C FM radio support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C
help
Say Y here if you want to use the TEA5764 FM chip found in
EZX phones. This FM chip is present in EZX phones from Motorola,
@@ -173,7 +172,7 @@ config RADIO_TEA5764_XTAL
config RADIO_SAA7706H
tristate "SAA7706H Car Radio DSP"
- depends on I2C && VIDEO_V4L2
+ depends on I2C
help
Say Y here if you want to use the SAA7706H Car radio Digital
Signal Processor, found for instance on the Russellville development
@@ -185,7 +184,7 @@ config RADIO_SAA7706H
config RADIO_TEF6862
tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
- depends on I2C && VIDEO_V4L2
+ depends on I2C
help
Say Y here if you want to use the TEF6862 Car Radio Enhanced
Selectivity Tuner, found for instance on the Russellville development
@@ -197,7 +196,7 @@ config RADIO_TEF6862
config RADIO_TIMBERDALE
tristate "Enable the Timberdale radio driver"
- depends on MFD_TIMBERDALE && VIDEO_V4L2
+ depends on MFD_TIMBERDALE
depends on I2C # for RADIO_SAA7706H
select RADIO_TEF6862
select RADIO_SAA7706H
@@ -208,7 +207,7 @@ config RADIO_TIMBERDALE
config RADIO_WL1273
tristate "Texas Instruments WL1273 I2C FM Radio"
- depends on I2C && VIDEO_V4L2
+ depends on I2C
select MFD_CORE
select MFD_WL1273_CORE
select FW_LOADER
@@ -245,7 +244,6 @@ config RADIO_ISA
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
help
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -256,7 +254,6 @@ config RADIO_CADET
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -288,7 +285,6 @@ config RADIO_RTRACK_PORT
config RADIO_RTRACK2
tristate "AIMSlab RadioTrack II support"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have this FM radio card, and then fill in the
@@ -312,7 +308,6 @@ config RADIO_RTRACK2_PORT
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -333,7 +328,6 @@ config RADIO_AZTECH_PORT
config RADIO_GEMTEK
tristate "GemTek Radio card (or compatible) support"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have this FM radio card, and then fill in the
@@ -374,7 +368,7 @@ config RADIO_GEMTEK_PROBE
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
depends on ISA || COMPILE_TEST
- depends on ISA_DMA_API && VIDEO_V4L2 && SND
+ depends on ISA_DMA_API && SND
select SND_ISA
select SND_MIRO
help
@@ -389,7 +383,6 @@ config RADIO_MIROPCM20
config RADIO_SF16FMI
tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
help
Choose Y here if you have one of these FM radio cards.
@@ -399,7 +392,6 @@ config RADIO_SF16FMI
config RADIO_SF16FMR2
tristate "SF16-FMR2/SF16-FMD2 Radio"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_TEA575X
help
Choose Y here if you have one of these FM radio cards.
@@ -410,7 +402,6 @@ config RADIO_SF16FMR2
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have this FM radio card.
@@ -425,7 +416,6 @@ config RADIO_TERRATEC
config RADIO_TRUST
tristate "Trust FM radio card"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
This is a driver for the Trust FM radio cards. Say Y if you have
@@ -449,7 +439,6 @@ config RADIO_TRUST_PORT
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -484,7 +473,6 @@ config RADIO_TYPHOON_MUTEFREQ
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
depends on ISA || COMPILE_TEST
- depends on VIDEO_V4L2
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config RADIO_SI470X
tristate "Silicon Labs Si470x FM Radio Receiver support"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
help
This is a driver for devices with the Silicon Labs SI470x
chip (either via USB or I2C buses).
@@ -4,7 +4,7 @@
#
config RADIO_WL128X
tristate "Texas Instruments WL128x FM Radio"
- depends on VIDEO_V4L2 && RFKILL && TTY && TI_ST
+ depends on VIDEO_DEV && RFKILL && TTY && TI_ST
depends on GPIOLIB || COMPILE_TEST
help
Choose Y here if you have this FM radio chip.
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-if VIDEO_V4L2
+if VIDEO_DEV
comment "SPI I2C drivers auto-selected by 'Autoselect ancillary drivers'"
depends on MEDIA_HIDE_ANCILLARY_SUBDRV && SPI
@@ -9,7 +9,7 @@ menu "SPI helper chips"
config VIDEO_GS1662
tristate "Gennum Serializers video"
- depends on SPI && VIDEO_V4L2
+ depends on SPI && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
@@ -12,7 +12,7 @@ source "drivers/media/test-drivers/vivid/Kconfig"
config VIDEO_VIM2M
tristate "Virtual Memory-to-Memory Driver"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
select MEDIA_CONTROLLER
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_VICODEC
tristate "Virtual Codec Driver"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
select MEDIA_CONTROLLER
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_VIMC
tristate "Virtual Media Controller Driver (VIMC)"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select FONT_SUPPORT
select FONT_8x16
select MEDIA_CONTROLLER
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_VIVID
tristate "Virtual Video Test Driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB
+ depends on VIDEO_DEV && !SPARC32 && !SPARC64 && FB
depends on HAS_DMA
select FONT_SUPPORT
select FONT_8x16
@@ -85,7 +85,7 @@ config MEDIA_TUNER_TEA5767
config MEDIA_TUNER_MSI001
tristate "Mirics MSi001"
- depends on MEDIA_SUPPORT && SPI && VIDEO_V4L2
+ depends on MEDIA_SUPPORT && SPI && VIDEO_DEV
default m if !MEDIA_SUBDRV_AUTOSELECT
help
Mirics MSi001 silicon tuner driver.
@@ -223,7 +223,7 @@ config MEDIA_TUNER_TDA18212
config MEDIA_TUNER_E4000
tristate "Elonics E4000 silicon tuner"
- depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2
+ depends on MEDIA_SUPPORT && I2C && VIDEO_DEV
select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -231,7 +231,7 @@ config MEDIA_TUNER_E4000
config MEDIA_TUNER_FC2580
tristate "FCI FC2580 silicon tuner"
- depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2
+ depends on MEDIA_SUPPORT && I2C && VIDEO_DEV
select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -257,7 +257,7 @@ static int e4000_set_params(struct e4000_dev *dev)
/*
* V4L2 API
*/
-#if IS_ENABLED(CONFIG_VIDEO_V4L2)
+#if IS_ENABLED(CONFIG_VIDEO_DEV)
static const struct v4l2_frequency_band bands[] = {
{
.type = V4L2_TUNER_RF,
@@ -654,7 +654,7 @@ static int e4000_probe(struct i2c_client *client,
if (ret)
goto err_kfree;
-#if IS_ENABLED(CONFIG_VIDEO_V4L2)
+#if IS_ENABLED(CONFIG_VIDEO_DEV)
/* Register controls */
v4l2_ctrl_handler_init(&dev->hdl, 9);
dev->bandwidth_auto = v4l2_ctrl_new_std(&dev->hdl, &e4000_ctrl_ops,
@@ -713,7 +713,7 @@ static int e4000_remove(struct i2c_client *client)
dev_dbg(&client->dev, "\n");
-#if IS_ENABLED(CONFIG_VIDEO_V4L2)
+#if IS_ENABLED(CONFIG_VIDEO_DEV)
v4l2_ctrl_handler_free(&dev->hdl);
#endif
kfree(dev);
@@ -357,7 +357,7 @@ static const struct dvb_tuner_ops fc2580_dvb_tuner_ops = {
/*
* V4L2 API
*/
-#if IS_ENABLED(CONFIG_VIDEO_V4L2)
+#if IS_ENABLED(CONFIG_VIDEO_DEV)
static const struct v4l2_frequency_band bands[] = {
{
.type = V4L2_TUNER_RF,
@@ -552,7 +552,7 @@ static int fc2580_probe(struct i2c_client *client,
goto err_kfree;
}
-#if IS_ENABLED(CONFIG_VIDEO_V4L2)
+#if IS_ENABLED(CONFIG_VIDEO_DEV)
/* Register controls */
v4l2_ctrl_handler_init(&dev->hdl, 2);
dev->bandwidth_auto = v4l2_ctrl_new_std(&dev->hdl, &fc2580_ctrl_ops,
@@ -594,7 +594,7 @@ static int fc2580_remove(struct i2c_client *client)
dev_dbg(&client->dev, "\n");
-#if IS_ENABLED(CONFIG_VIDEO_V4L2)
+#if IS_ENABLED(CONFIG_VIDEO_DEV)
v4l2_ctrl_handler_free(&dev->hdl);
#endif
kfree(dev);
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_AIRSPY
tristate "AirSpy"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
help
This is a video4linux2 driver for AirSpy SDR device.
@@ -2,12 +2,12 @@
config VIDEO_AU0828
tristate "Auvitek AU0828 support"
- depends on I2C && INPUT && DVB_CORE && USB && VIDEO_V4L2
+ depends on I2C && INPUT && DVB_CORE && USB && VIDEO_DEV
select MEDIA_CONTROLLER
select MEDIA_CONTROLLER_DVB
select I2C_ALGOBIT
select VIDEO_TVEEPROM
- select VIDEOBUF2_VMALLOC if VIDEO_V4L2
+ select VIDEOBUF2_VMALLOC if VIDEO_DEV
select DVB_AU8522_DTV if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
@@ -22,7 +22,7 @@ config VIDEO_AU0828
config VIDEO_AU0828_V4L2
bool "Auvitek AU0828 v4l2 analog video support"
depends on VIDEO_AU0828
- depends on VIDEO_V4L2=y || VIDEO_V4L2=VIDEO_AU0828
+ depends on VIDEO_DEV=y || VIDEO_DEV=VIDEO_AU0828
select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TUNER
default y
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_CPIA2
tristate "CPiA2 Video For Linux"
- depends on VIDEO_DEV && USB && VIDEO_V4L2
+ depends on USB && VIDEO_DEV
help
This is the video4linux driver for cameras based on Vision's CPiA2
(Colour Processor Interface ASIC), such as the Digital Blue QX5
@@ -40,7 +40,7 @@ config DVB_USB_AF9035
select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2)
+ select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_DEV)
select MEDIA_TUNER_IT913X if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Afatech AF9035 based DVB USB receiver.
@@ -139,12 +139,12 @@ config DVB_USB_RTL28XXU
select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
select DVB_RTL2830
select DVB_RTL2832
- select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT && VIDEO_V4L2)
+ select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT && VIDEO_DEV)
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_E4000 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2)
+ select MEDIA_TUNER_E4000 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_DEV)
select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2)
+ select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_DEV)
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
@@ -150,8 +150,8 @@ config DVB_USB_CXUSB
config DVB_USB_CXUSB_ANALOG
bool "Analog support for the Conexant USB2.0 hybrid reference design"
- depends on DVB_USB_CXUSB && VIDEO_V4L2
- depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_USB_CXUSB
+ depends on DVB_USB_CXUSB && VIDEO_DEV
+ depends on VIDEO_DEV=y || VIDEO_DEV=DVB_USB_CXUSB
select VIDEO_CX25840
select VIDEOBUF2_VMALLOC
help
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig USB_GSPCA
tristate "GSPCA based webcams"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on INPUT || INPUT=n
select VIDEOBUF2_VMALLOC
help
@@ -17,7 +17,7 @@ menuconfig USB_GSPCA
module will be called gspca_main.
-if USB_GSPCA && VIDEO_V4L2
+if USB_GSPCA && VIDEO_DEV
source "drivers/media/usb/gspca/m5602/Kconfig"
source "drivers/media/usb/gspca/stv06xx/Kconfig"
@@ -25,7 +25,7 @@ source "drivers/media/usb/gspca/gl860/Kconfig"
config USB_GSPCA_BENQ
tristate "Benq USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for the Benq DC E300 camera.
@@ -34,7 +34,7 @@ config USB_GSPCA_BENQ
config USB_GSPCA_CONEX
tristate "Conexant Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Conexant chip.
@@ -43,7 +43,7 @@ config USB_GSPCA_CONEX
config USB_GSPCA_CPIA1
tristate "cpia CPiA (version 1) Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for USB cameras based on the cpia
CPiA chip. Note that you need at least version 0.6.4 of libv4l for
@@ -54,7 +54,7 @@ config USB_GSPCA_CPIA1
config USB_GSPCA_DTCS033
tristate "DTCS033 (Scopium) USB Astro-Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for the Scopium camera
for planetary astrophotography.
@@ -64,7 +64,7 @@ config USB_GSPCA_DTCS033
config USB_GSPCA_ETOMS
tristate "Etoms USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Etoms chip.
@@ -73,7 +73,7 @@ config USB_GSPCA_ETOMS
config USB_GSPCA_FINEPIX
tristate "Fujifilm FinePix USB V4L2 driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the FinePix chip.
@@ -82,7 +82,7 @@ config USB_GSPCA_FINEPIX
config USB_GSPCA_JEILINJ
tristate "Jeilin JPEG USB V4L2 driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on this Jeilin chip.
@@ -91,7 +91,7 @@ config USB_GSPCA_JEILINJ
config USB_GSPCA_JL2005BCD
tristate "JL2005B/C/D USB V4L2 driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based the
JL2005B, JL2005C, or JL2005D chip.
@@ -101,7 +101,7 @@ config USB_GSPCA_JL2005BCD
config USB_GSPCA_KINECT
tristate "Kinect sensor device USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for the Microsoft Kinect sensor device.
@@ -110,7 +110,7 @@ config USB_GSPCA_KINECT
config USB_GSPCA_KONICA
tristate "Konica USB Camera V4L2 driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Konica chip.
@@ -119,7 +119,7 @@ config USB_GSPCA_KONICA
config USB_GSPCA_MARS
tristate "Mars USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Mars chip.
@@ -128,7 +128,7 @@ config USB_GSPCA_MARS
config USB_GSPCA_MR97310A
tristate "Mars-Semi MR97310A USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the MR97310A chip.
@@ -137,7 +137,7 @@ config USB_GSPCA_MR97310A
config USB_GSPCA_NW80X
tristate "Divio based (NW80x) USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the NW80x chips.
@@ -146,7 +146,7 @@ config USB_GSPCA_NW80X
config USB_GSPCA_OV519
tristate "OV51x / OVFX2 / W996xCF USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on one of these:
OV511(+), OV518(+), OV519, OVFX2, W9967CF, W9968CF
@@ -156,7 +156,7 @@ config USB_GSPCA_OV519
config USB_GSPCA_OV534
tristate "OV534 OV772x USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the OV534 chip
and sensor OV772x (e.g. Sony Playstation EYE)
@@ -166,7 +166,7 @@ config USB_GSPCA_OV534
config USB_GSPCA_OV534_9
tristate "OV534 OV965x USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the OV534 chip
and sensor OV965x (e.g. Hercules Dualpix)
@@ -176,7 +176,7 @@ config USB_GSPCA_OV534_9
config USB_GSPCA_PAC207
tristate "Pixart PAC207 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the PAC207 chip.
@@ -185,7 +185,7 @@ config USB_GSPCA_PAC207
config USB_GSPCA_PAC7302
tristate "Pixart PAC7302 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the PAC7302 chip.
@@ -194,7 +194,7 @@ config USB_GSPCA_PAC7302
config USB_GSPCA_PAC7311
tristate "Pixart PAC7311 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the PAC7311 chip.
@@ -203,7 +203,7 @@ config USB_GSPCA_PAC7311
config USB_GSPCA_SE401
tristate "SE401 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the
Endpoints (formerly known as AOX) se401 chip.
@@ -213,7 +213,7 @@ config USB_GSPCA_SE401
config USB_GSPCA_SN9C2028
tristate "SONIX Dual-Mode USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want streaming support for Sonix SN9C2028 cameras.
These are supported as stillcams in libgphoto2/camlibs/sonix.
@@ -223,7 +223,7 @@ config USB_GSPCA_SN9C2028
config USB_GSPCA_SN9C20X
tristate "SN9C20X USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the
sn9c20x chips (SN9C201 and SN9C202).
@@ -233,7 +233,7 @@ config USB_GSPCA_SN9C20X
config USB_GSPCA_SONIXB
tristate "SONIX Bayer USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Sonix
chips with Bayer format (SN9C101, SN9C102 and SN9C103).
@@ -243,7 +243,7 @@ config USB_GSPCA_SONIXB
config USB_GSPCA_SONIXJ
tristate "SONIX JPEG USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Sonix
chips with JPEG format (SN9C102P, SN9C105 and >= SN9C110).
@@ -253,7 +253,7 @@ config USB_GSPCA_SONIXJ
config USB_GSPCA_SPCA500
tristate "SPCA500 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA500 chip.
@@ -262,7 +262,7 @@ config USB_GSPCA_SPCA500
config USB_GSPCA_SPCA501
tristate "SPCA501 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA501 chip.
@@ -271,7 +271,7 @@ config USB_GSPCA_SPCA501
config USB_GSPCA_SPCA505
tristate "SPCA505 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA505 chip.
@@ -280,7 +280,7 @@ config USB_GSPCA_SPCA505
config USB_GSPCA_SPCA506
tristate "SPCA506 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA506 chip.
@@ -289,7 +289,7 @@ config USB_GSPCA_SPCA506
config USB_GSPCA_SPCA508
tristate "SPCA508 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA508 chip.
@@ -298,7 +298,7 @@ config USB_GSPCA_SPCA508
config USB_GSPCA_SPCA561
tristate "SPCA561 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA561 chip.
@@ -307,7 +307,7 @@ config USB_GSPCA_SPCA561
config USB_GSPCA_SPCA1528
tristate "SPCA1528 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SPCA1528 chip.
@@ -316,7 +316,7 @@ config USB_GSPCA_SPCA1528
config USB_GSPCA_SQ905
tristate "SQ Technologies SQ905 based USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SQ905 chip.
@@ -325,7 +325,7 @@ config USB_GSPCA_SQ905
config USB_GSPCA_SQ905C
tristate "SQ Technologies SQ905C based USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SQ905C chip.
@@ -334,7 +334,7 @@ config USB_GSPCA_SQ905C
config USB_GSPCA_SQ930X
tristate "SQ Technologies SQ930X based USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the SQ930X chip.
@@ -343,7 +343,7 @@ config USB_GSPCA_SQ930X
config USB_GSPCA_STK014
tristate "Syntek DV4000 (STK014) USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the STK014 chip.
@@ -352,7 +352,7 @@ config USB_GSPCA_STK014
config USB_GSPCA_STK1135
tristate "Syntek STK1135 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the STK1135 chip.
@@ -361,7 +361,7 @@ config USB_GSPCA_STK1135
config USB_GSPCA_STV0680
tristate "STV0680 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the STV0680 chip.
@@ -370,7 +370,7 @@ config USB_GSPCA_STV0680
config USB_GSPCA_SUNPLUS
tristate "SUNPLUS USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the Sunplus
SPCA504(abc) SPCA533 SPCA536 chips.
@@ -380,7 +380,7 @@ config USB_GSPCA_SUNPLUS
config USB_GSPCA_T613
tristate "T613 (JPEG Compliance) USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the T613 chip.
@@ -389,7 +389,7 @@ config USB_GSPCA_T613
config USB_GSPCA_TOPRO
tristate "TOPRO USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the
TP6800 and TP6810 Topro chips.
@@ -399,7 +399,7 @@ config USB_GSPCA_TOPRO
config USB_GSPCA_TOUPTEK
tristate "Touptek USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the ToupTek UCMOS
/ AmScope MU series camera.
@@ -409,7 +409,7 @@ config USB_GSPCA_TOUPTEK
config USB_GSPCA_TV8532
tristate "TV8532 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the TV8531 chip.
@@ -418,7 +418,7 @@ config USB_GSPCA_TV8532
config USB_GSPCA_VC032X
tristate "VC032X USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the VC032X chip.
@@ -427,7 +427,7 @@ config USB_GSPCA_VC032X
config USB_GSPCA_VICAM
tristate "ViCam USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for the 3com homeconnect camera
(vicam).
@@ -437,7 +437,7 @@ config USB_GSPCA_VICAM
config USB_GSPCA_XIRLINK_CIT
tristate "Xirlink C-It USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for Xirlink C-It bases cameras.
@@ -446,7 +446,7 @@ config USB_GSPCA_XIRLINK_CIT
config USB_GSPCA_ZC3XX
tristate "ZC3XX USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the ZC3XX chip.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_GL860
tristate "GL860 USB Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the GL860 chip.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_M5602
tristate "ALi USB m5602 Camera Driver"
- depends on VIDEO_V4L2 && USB_GSPCA
+ depends on VIDEO_DEV && USB_GSPCA
help
Say Y here if you want support for cameras based on the
ALi m5602 connected to various image sensors.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_HACKRF
tristate "HackRF"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
help
This is a video4linux2 driver for HackRF SDR device.
@@ -2,7 +2,7 @@
config VIDEO_HDPVR
tristate "Hauppauge HD PVR support"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
help
This is a video4linux driver for Hauppauge's HD PVR USB device.
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_MSI2500
tristate "Mirics MSi2500"
- depends on VIDEO_V4L2 && SPI
+ depends on VIDEO_DEV && SPI
select VIDEOBUF2_VMALLOC
select MEDIA_TUNER_MSI001
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_PVRUSB2
tristate "Hauppauge WinTV-PVR USB2 support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_PWC
tristate "USB Philips Cameras"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
help
Say Y or M here if you want to use one of these Philips & OEM
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_S2255
tristate "USB Sensoray 2255 video capture device"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
help
Say Y here if you want support for the Sensoray 2255 USB device.
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_STKWEBCAM
tristate "USB Syntek DC1125 Camera support"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
help
Say Y here if you want to use this type of camera.
Supported devices are typically found in some Asus laptops,
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_USBTV
tristate "USBTV007 video capture support"
- depends on VIDEO_V4L2 && SND
+ depends on VIDEO_DEV && SND
select SND_PCM
select VIDEOBUF2_VMALLOC
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_VIDEO_CLASS
tristate "USB Video Class (UVC)"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
help
Support for the USB Video Class (UVC). Currently only video
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select VIDEOBUF_GEN
select VIDEOBUF_VMALLOC
help
@@ -3,17 +3,9 @@
# Generic video config states
#
-# Enable the V4L2 core and API
-config VIDEO_V4L2
- tristate
- depends on (I2C || I2C=n) && VIDEO_DEV
- select RATIONAL
- select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
- default (I2C || I2C=n) && VIDEO_DEV
-
config VIDEO_V4L2_I2C
bool
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
default y
config VIDEO_V4L2_SUBDEV_API
@@ -64,7 +56,7 @@ config V4L2_MEM2MEM_DEV
# Used by LED subsystem flash drivers
config V4L2_FLASH_LED_CLASS
tristate "V4L2 flash API for LED flash class devices"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_DEV && VIDEO_V4L2_SUBDEV_API
depends on LEDS_CLASS_FLASH
select V4L2_ASYNC
help
@@ -38,4 +38,4 @@ obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-obj-$(CONFIG_VIDEO_V4L2) += v4l2-dv-timings.o videodev.o
+obj-$(CONFIG_VIDEO_DEV) += v4l2-dv-timings.o videodev.o
@@ -11,7 +11,7 @@ menuconfig INTEL_ATOMISP
config VIDEO_ATOMISP
tristate "Intel Atom Image Signal Processor Driver"
- depends on VIDEO_V4L2 && INTEL_ATOMISP
+ depends on VIDEO_DEV && INTEL_ATOMISP
depends on PMIC_OPREGION
select IOSF_MBI
select VIDEOBUF_VMALLOC
@@ -6,7 +6,7 @@
config VIDEO_ATOMISP_OV2722
tristate "OVT ov2722 sensor support"
depends on ACPI
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor-level driver for the OVT
OV2722 raw camera.
@@ -18,7 +18,7 @@ config VIDEO_ATOMISP_OV2722
config VIDEO_ATOMISP_GC2235
tristate "Galaxy gc2235 sensor support"
depends on ACPI
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor-level driver for the OVT
GC2235 raw camera.
@@ -40,7 +40,7 @@ config VIDEO_ATOMISP_MSRLIST_HELPER
config VIDEO_ATOMISP_MT9M114
tristate "Aptina mt9m114 sensor support"
depends on ACPI
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor-level driver for the Micron
mt9m114 1.3 Mpixel camera.
@@ -52,7 +52,7 @@ config VIDEO_ATOMISP_MT9M114
config VIDEO_ATOMISP_GC0310
tristate "GC0310 sensor support"
depends on ACPI
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor-level driver for the Galaxycore
GC0310 0.3MP sensor.
@@ -60,7 +60,7 @@ config VIDEO_ATOMISP_GC0310
config VIDEO_ATOMISP_OV2680
tristate "Omnivision OV2680 sensor support"
depends on ACPI
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor-level driver for the Omnivision
OV2680 raw camera.
@@ -72,7 +72,7 @@ config VIDEO_ATOMISP_OV2680
config VIDEO_ATOMISP_OV5693
tristate "Omnivision ov5693 sensor support"
depends on ACPI
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_DEV
help
This is a Video4Linux2 sensor-level driver for the Micron
ov5693 5 Mpixel camera.
@@ -88,7 +88,7 @@ config VIDEO_ATOMISP_OV5693
config VIDEO_ATOMISP_LM3554
tristate "LM3554 flash light driver"
depends on ACPI
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
help
This is a Video4Linux2 sub-dev driver for the LM3554
flash light driver.
@@ -2,7 +2,7 @@
config VIDEO_HANTRO
tristate "Hantro VPU driver"
depends on ARCH_MXC || ARCH_ROCKCHIP || ARCH_AT91 || ARCH_SUNXI || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select MEDIA_CONTROLLER
select MEDIA_CONTROLLER_REQUEST_API
select VIDEOBUF2_DMA_CONTIG
@@ -4,7 +4,7 @@ config VIDEO_IMX_MEDIA
depends on ARCH_MXC || COMPILE_TEST
depends on HAS_DMA
depends on VIDEO_DEV
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select MEDIA_CONTROLLER
select V4L2_FWNODE
select V4L2_MEM2MEM_DEV
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config VIDEO_IPU3_IMGU
tristate "Intel ipu3-imgu driver"
- depends on PCI && VIDEO_V4L2
+ depends on PCI && VIDEO_DEV
depends on X86
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -3,7 +3,7 @@ config VIDEO_MAX96712
tristate "Maxim MAX96712 Quad GMSL2 Deserializer support"
depends on I2C
depends on OF_GPIO
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select V4L2_FWNODE
select VIDEO_V4L2_SUBDEV_API
select MEDIA_CONTROLLER
@@ -2,7 +2,7 @@
config VIDEO_MESON_VDEC
tristate "Amlogic video decoder driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
+ depends on VIDEO_DEV && HAS_DMA
depends on ARCH_MESON || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
@@ -2,7 +2,7 @@
config VIDEO_OMAP4
tristate "OMAP 4 Camera support"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_DEV && I2C
depends on ARCH_OMAP4 || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
@@ -2,7 +2,7 @@
config VIDEO_ROCKCHIP_VDEC
tristate "Rockchip Video Decoder driver"
depends on ARCH_ROCKCHIP || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
select MEDIA_CONTROLLER
select MEDIA_CONTROLLER_REQUEST_API
select VIDEOBUF2_DMA_CONTIG
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config VIDEO_SUNXI_CEDRUS
tristate "Allwinner Cedrus VPU driver"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV
depends on HAS_DMA
depends on OF
select MEDIA_CONTROLLER
@@ -2,7 +2,7 @@
config VIDEO_TEGRA
tristate "NVIDIA Tegra VI driver"
depends on TEGRA_HOST1X
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
@@ -1,6 +1,6 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux (Deprecated)"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L2
+ depends on PCI && I2C_ALGOBIT && VIDEO_DEV
depends on !ALPHA
depends on DEBUG_FS
select VIDEOBUF2_DMA_CONTIG
@@ -5,7 +5,7 @@
config MOST_VIDEO
tristate "Video"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
help
Say Y here if you want to commumicate via Video 4 Linux.
@@ -2,7 +2,7 @@
config VIDEO_BCM2835
tristate "BCM2835 Camera"
depends on MEDIA_SUPPORT
- depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST)
+ depends on VIDEO_DEV && (ARCH_BCM2835 || COMPILE_TEST)
select BCM2835_VCHIQ
select BCM2835_VCHIQ_MMAL
select VIDEOBUF2_VMALLOC
@@ -448,7 +448,7 @@ config USB_CONFIGFS_F_HID
config USB_CONFIGFS_F_UVC
bool "USB Webcam function"
depends on USB_CONFIGFS
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
depends on VIDEO_DEV
select VIDEOBUF2_DMA_SG
select VIDEOBUF2_VMALLOC
@@ -500,7 +500,7 @@ endif
# or video class gadget drivers), or specific hardware, here.
config USB_G_WEBCAM
tristate "USB Webcam Gadget"
- depends on VIDEO_V4L2
+ depends on VIDEO_DEV
select USB_LIBCOMPOSITE
select VIDEOBUF2_DMA_SG
select VIDEOBUF2_VMALLOC
@@ -559,7 +559,7 @@ config SND_ES1968_RADIO
bool "Enable TEA5757 radio tuner support for es1968"
depends on SND_ES1968
depends on MEDIA_RADIO_SUPPORT
- depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968
+ depends on VIDEO_DEV=y || VIDEO_DEV=SND_ES1968
select RADIO_ADAPTERS
select RADIO_TEA575X
@@ -583,7 +583,7 @@ config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
depends on MEDIA_RADIO_SUPPORT
- depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
+ depends on VIDEO_DEV=y || VIDEO_DEV=SND_FM801
select RADIO_ADAPTERS
select RADIO_TEA575X
help