diff mbox series

[RESEND,v3,2/3] net: mdio: add reset control for Aspeed MDIO

Message ID 20220407075734.19644-3-dylan_hung@aspeedtech.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Add reset deassertion for Aspeed MDIO | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 12 of 12 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 45 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Dylan Hung April 7, 2022, 7:57 a.m. UTC 
Add reset assertion/deassertion for Aspeed MDIO.  There are 4 MDIO
controllers embedded in Aspeed AST2600 SOC and share one reset control
register SCU50[3].  To work with old DT blobs which don't have the reset
property, devm_reset_control_get_optional_shared is used in this change.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/net/mdio/mdio-aspeed.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

Comments

Andrew Jeffery April 11, 2022, 12:20 a.m. UTC | #1 
On Thu, 7 Apr 2022, at 17:27, Dylan Hung wrote:
> Add reset assertion/deassertion for Aspeed MDIO.  There are 4 MDIO
> controllers embedded in Aspeed AST2600 SOC and share one reset control
> register SCU50[3].  To work with old DT blobs which don't have the reset
> property, devm_reset_control_get_optional_shared is used in this change.
>
> Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
>  drivers/net/mdio/mdio-aspeed.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
> index e2273588c75b..1afb58ccc524 100644
> --- a/drivers/net/mdio/mdio-aspeed.c
> +++ b/drivers/net/mdio/mdio-aspeed.c
> @@ -3,6 +3,7 @@
> 
>  #include <linux/bitfield.h>
>  #include <linux/delay.h>
> +#include <linux/reset.h>
>  #include <linux/iopoll.h>
>  #include <linux/mdio.h>
>  #include <linux/module.h>
> @@ -37,6 +38,7 @@
> 
>  struct aspeed_mdio {
>  	void __iomem *base;
> +	struct reset_control *reset;
>  };
> 
>  static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
> @@ -120,6 +122,12 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
>  	if (IS_ERR(ctx->base))
>  		return PTR_ERR(ctx->base);
> 
> +	ctx->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
> +	if (IS_ERR(ctx->reset))
> +		return PTR_ERR(ctx->reset);
> +
> +	reset_control_deassert(ctx->reset);
> +
>  	bus->name = DRV_NAME;
>  	snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
>  	bus->parent = &pdev->dev;
> @@ -129,6 +137,7 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
>  	rc = of_mdiobus_register(bus, pdev->dev.of_node);
>  	if (rc) {
>  		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
> +		reset_control_assert(ctx->reset);
>  		return rc;
>  	}
> 
> @@ -139,7 +148,11 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
> 
>  static int aspeed_mdio_remove(struct platform_device *pdev)
>  {
> -	mdiobus_unregister(platform_get_drvdata(pdev));
> +	struct mii_bus *bus = (struct mii_bus *)platform_get_drvdata(pdev);
> +	struct aspeed_mdio *ctx = bus->priv;
> +
> +	reset_control_assert(ctx->reset);

Isn't this unnecessary because you've used the devm_ variant to acquire 
the reset?

Andrew
Philipp Zabel April 11, 2022, 9:19 a.m. UTC | #2 
On Mo, 2022-04-11 at 09:50 +0930, Andrew Jeffery wrote:
> 
> On Thu, 7 Apr 2022, at 17:27, Dylan Hung wrote:
> > Add reset assertion/deassertion for Aspeed MDIO.  There are 4 MDIO
> > controllers embedded in Aspeed AST2600 SOC and share one reset control
> > register SCU50[3].  To work with old DT blobs which don't have the reset
> > property, devm_reset_control_get_optional_shared is used in this change.
> > 
> > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
> > Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> >  drivers/net/mdio/mdio-aspeed.c | 15 ++++++++++++++-
> >  1 file changed, 14 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
> > index e2273588c75b..1afb58ccc524 100644
> > --- a/drivers/net/mdio/mdio-aspeed.c
> > +++ b/drivers/net/mdio/mdio-aspeed.c
> > @@ -3,6 +3,7 @@
> > 
> >  #include <linux/bitfield.h>
> >  #include <linux/delay.h>
> > +#include <linux/reset.h>
> >  #include <linux/iopoll.h>
> >  #include <linux/mdio.h>
> >  #include <linux/module.h>
> > @@ -37,6 +38,7 @@
> > 
> >  struct aspeed_mdio {
> >  	void __iomem *base;
> > +	struct reset_control *reset;
> >  };
> > 
> >  static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
> > @@ -120,6 +122,12 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
> >  	if (IS_ERR(ctx->base))
> >  		return PTR_ERR(ctx->base);
> > 
> > +	ctx->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
> > +	if (IS_ERR(ctx->reset))
> > +		return PTR_ERR(ctx->reset);
> > +
> > +	reset_control_deassert(ctx->reset);
> > +
> >  	bus->name = DRV_NAME;
> >  	snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
> >  	bus->parent = &pdev->dev;
> > @@ -129,6 +137,7 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
> >  	rc = of_mdiobus_register(bus, pdev->dev.of_node);
> >  	if (rc) {
> >  		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
> > +		reset_control_assert(ctx->reset);
> >  		return rc;
> >  	}
> > 
> > @@ -139,7 +148,11 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
> > 
> >  static int aspeed_mdio_remove(struct platform_device *pdev)
> >  {
> > -	mdiobus_unregister(platform_get_drvdata(pdev));
> > +	struct mii_bus *bus = (struct mii_bus *)platform_get_drvdata(pdev);
> > +	struct aspeed_mdio *ctx = bus->priv;
> > +
> > +	reset_control_assert(ctx->reset);
> 
> Isn't this unnecessary because you've used the devm_ variant to acquire 
> the reset?

No, this is correct. deassert/assert needs to be balanced, and the
reset_control_deassert() call in aspeed_mdio_probe() is not devres
managed.

regards
Philipp
diff mbox series

Patch

diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
index e2273588c75b..1afb58ccc524 100644
--- a/drivers/net/mdio/mdio-aspeed.c
+++ b/drivers/net/mdio/mdio-aspeed.c
@@ -3,6 +3,7 @@ 
 
 #include <linux/bitfield.h>
 #include <linux/delay.h>
+#include <linux/reset.h>
 #include <linux/iopoll.h>
 #include <linux/mdio.h>
 #include <linux/module.h>
@@ -37,6 +38,7 @@ 
 
 struct aspeed_mdio {
 	void __iomem *base;
+	struct reset_control *reset;
 };
 
 static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
@@ -120,6 +122,12 @@  static int aspeed_mdio_probe(struct platform_device *pdev)
 	if (IS_ERR(ctx->base))
 		return PTR_ERR(ctx->base);
 
+	ctx->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	if (IS_ERR(ctx->reset))
+		return PTR_ERR(ctx->reset);
+
+	reset_control_deassert(ctx->reset);
+
 	bus->name = DRV_NAME;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
 	bus->parent = &pdev->dev;
@@ -129,6 +137,7 @@  static int aspeed_mdio_probe(struct platform_device *pdev)
 	rc = of_mdiobus_register(bus, pdev->dev.of_node);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+		reset_control_assert(ctx->reset);
 		return rc;
 	}
 
@@ -139,7 +148,11 @@  static int aspeed_mdio_probe(struct platform_device *pdev)
 
 static int aspeed_mdio_remove(struct platform_device *pdev)
 {
-	mdiobus_unregister(platform_get_drvdata(pdev));
+	struct mii_bus *bus = (struct mii_bus *)platform_get_drvdata(pdev);
+	struct aspeed_mdio *ctx = bus->priv;
+
+	reset_control_assert(ctx->reset);
+	mdiobus_unregister(bus);
 
 	return 0;
 }