diff mbox series

[04/23] ARM: dts: qcom-msm8974*: Fix I2C labels

Message ID 20220415115633.575010-5-konrad.dybcio@somainline.org (mailing list archive)
State Accepted
Headers show
Series [01/23] ARM: dts: qcom-*-sony*: Mention SONY board names in DT filenames | expand

Commit Message

Konrad Dybcio April 15, 2022, 11:56 a.m. UTC 
Fix up the label names and add missing ones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Krzysztof Kozlowski April 18, 2022, 12:34 p.m. UTC | #1 
On 15/04/2022 13:56, Konrad Dybcio wrote:
> Fix up the label names and add missing ones.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
>  arch/arm/boot/dts/qcom-msm8974.dtsi | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 

This might conflict with:
https://lore.kernel.org/all/20220401201035.189106-7-krzysztof.kozlowski@linaro.org/

Actually all your further patches might.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index e102b72558f1..a74563c6f068 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -957,7 +957,7 @@  msmgpio: pinctrl@fd510000 {
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		i2c@f9923000 {
+		blsp1_i2c1: i2c@f9923000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9923000 0x1000>;
@@ -968,7 +968,7 @@  i2c@f9923000 {
 			#size-cells = <0>;
 		};
 
-		i2c@f9924000 {
+		blsp1_i2c2: i2c@f9924000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9924000 0x1000>;
@@ -979,7 +979,7 @@  i2c@f9924000 {
 			#size-cells = <0>;
 		};
 
-		blsp_i2c3: i2c@f9925000 {
+		blsp1_i2c3: i2c@f9925000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9925000 0x1000>;
@@ -990,7 +990,7 @@  blsp_i2c3: i2c@f9925000 {
 			#size-cells = <0>;
 		};
 
-		blsp_i2c6: i2c@f9928000 {
+		blsp1_i2c6: i2c@f9928000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9928000 0x1000>;
@@ -1001,7 +1001,7 @@  blsp_i2c6: i2c@f9928000 {
 			#size-cells = <0>;
 		};
 
-		blsp_i2c8: i2c@f9964000 {
+		blsp2_i2c2: i2c@f9964000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9964000 0x1000>;
@@ -1012,7 +1012,7 @@  blsp_i2c8: i2c@f9964000 {
 			#size-cells = <0>;
 		};
 
-		blsp_i2c11: i2c@f9967000 {
+		blsp2_i2c5: i2c@f9967000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9967000 0x1000>;
@@ -1025,7 +1025,7 @@  blsp_i2c11: i2c@f9967000 {
 			dma-names = "tx", "rx";
 		};
 
-		blsp_i2c12: i2c@f9968000 {
+		blsp2_i2c6: i2c@f9968000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9968000 0x1000>;