diff mbox series

[2/6] ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C

Message ID 20220411200143.4876-3-stefan.wahren@i2se.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: bcm283x: Adjust GPIO line names | expand

Commit Message

Stefan Wahren April 11, 2022, 8:01 p.m. UTC 
From: Phil Elwell <phil@raspberrypi.com>

The GPIOs 46 & 47 are already used for a I2C interface to a SMPS.
So fix the GPIO line names accordingly.

Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Florian Fainelli April 19, 2022, 6:28 p.m. UTC | #1 
On Mon, 11 Apr 2022 22:01:39 +0200, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> From: Phil Elwell <phil@raspberrypi.com>
> 
> The GPIOs 46 & 47 are already used for a I2C interface to a SMPS.
> So fix the GPIO line names accordingly.
> 
> Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
> Signed-off-by: Phil Elwell <phil@raspberrypi.com>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..3dfce4312dfc 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -63,8 +63,8 @@  &gpio {
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",