diff mbox series

[2/2] ARM: dts: logicpd-som-lv: Move pinmuxing to peripheral nodes

Message ID 20220303171818.11060-2-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 | expand

Commit Message

Adam Ford March 3, 2022, 5:18 p.m. UTC 
Move some pinmux references to their respective peripherals.
This keeps the pins in safe-mode until they are requested.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Tony Lindgren April 21, 2022, 10:48 a.m. UTC | #1 
* Adam Ford <aford173@gmail.com> [220303 19:17]:
> Move some pinmux references to their respective peripherals.
> This keeps the pins in safe-mode until they are requested.

Applying into omap-for-v5.19/dt thanks.

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 55b619c99e24..9ba0ea4eb48a 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -27,6 +27,8 @@ 
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb2_phy: hsusb2_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb2_reset_pin>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
 		#phy-cells = <0>;
@@ -144,6 +146,8 @@ 
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
 	port2-mode = "ehci-phy";
 };
 
@@ -151,10 +155,7 @@ 
 	phys = <0 &hsusb2_phy>;
 };
 
-
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_pins>;
 
 	mmc3_pins: pinmux_mm3_pins {
 		pinctrl-single,pins = <
@@ -250,8 +251,7 @@ 
 };
 
 &omap3_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_reset_pin>;
+
 	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */