Message ID | 20220422222351.1297276-8-bjorn.andersson@linaro.org (mailing list archive) |
---|---|
State | Handled Elsewhere, archived |
Headers | show |
Series | typec: mux: Introduce support for multiple USB TypeC muxes | expand |
On Fri, Apr 22, 2022 at 03:23:51PM -0700, Bjorn Andersson wrote: > The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with > support for analog audio headsets. It allows sharing a common USB Type-C > port to pass USB2.0 signal, analog audio, sideband use wires and analog > microphone signal. > > Due to lacking upstream audio support for testing, the audio muxing is > left untouched, but implementation of muxing the SBU lines is provided > as a pair of Type-C mux and switch devices. This provides the necessary > support for enabling the DisplayPort altmode on devices with this > circuit. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > > Changes since v4: > - Disable locking of the regmap > - Use dev_fwnode() instead of explicit dereference > > drivers/usb/typec/mux/Kconfig | 10 ++ > drivers/usb/typec/mux/Makefile | 1 + > drivers/usb/typec/mux/fsa4480.c | 218 ++++++++++++++++++++++++++++++++ > 3 files changed, 229 insertions(+) > create mode 100644 drivers/usb/typec/mux/fsa4480.c > > diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig > index edead555835e..5eb2c17d72c1 100644 > --- a/drivers/usb/typec/mux/Kconfig > +++ b/drivers/usb/typec/mux/Kconfig > @@ -2,6 +2,16 @@ > > menu "USB Type-C Multiplexer/DeMultiplexer Switch support" > > +config TYPEC_MUX_FSA4480 > + tristate "ON Semi FSA4480 Analog Audio Switch driver" > + depends on I2C > + select REGMAP_I2C > + help > + Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which > + provides support for muxing analog audio and sideband signals on a > + common USB Type-C connector. > + If compiled as a module, the module will be named fsa4480. > + > config TYPEC_MUX_PI3USB30532 > tristate "Pericom PI3USB30532 Type-C cross switch driver" > depends on I2C > diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile > index 280a6f553115..e52a56c16bfb 100644 > --- a/drivers/usb/typec/mux/Makefile > +++ b/drivers/usb/typec/mux/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0 > > +obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o > obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o > obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o > diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c > new file mode 100644 > index 000000000000..6184f5367190 > --- /dev/null > +++ b/drivers/usb/typec/mux/fsa4480.c > @@ -0,0 +1,218 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021-2022 Linaro Ltd. > + * Copyright (C) 2018-2020 The Linux Foundation > + */ > + > +#include <linux/bits.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/regmap.h> > +#include <linux/usb/typec_dp.h> > +#include <linux/usb/typec_mux.h> > + > +#define FSA4480_SWITCH_ENABLE 0x04 > +#define FSA4480_SWITCH_SELECT 0x05 > +#define FSA4480_SWITCH_STATUS1 0x07 > +#define FSA4480_SLOW_L 0x08 > +#define FSA4480_SLOW_R 0x09 > +#define FSA4480_SLOW_MIC 0x0a > +#define FSA4480_SLOW_SENSE 0x0b > +#define FSA4480_SLOW_GND 0x0c > +#define FSA4480_DELAY_L_R 0x0d > +#define FSA4480_DELAY_L_MIC 0x0e > +#define FSA4480_DELAY_L_SENSE 0x0f > +#define FSA4480_DELAY_L_AGND 0x10 > +#define FSA4480_RESET 0x1e > +#define FSA4480_MAX_REGISTER 0x1f > + > +#define FSA4480_ENABLE_DEVICE BIT(7) > +#define FSA4480_ENABLE_SBU GENMASK(6, 5) > +#define FSA4480_ENABLE_USB GENMASK(4, 3) > + > +#define FSA4480_SEL_SBU_REVERSE GENMASK(6, 5) > +#define FSA4480_SEL_USB GENMASK(4, 3) > + > +struct fsa4480 { > + struct i2c_client *client; > + > + /* used to serialize concurrent change requests */ > + struct mutex lock; > + > + struct typec_switch_dev *sw; > + struct typec_mux_dev *mux; > + > + struct regmap *regmap; > + > + u8 cur_enable; > + u8 cur_select; > +}; > + > +static const struct regmap_config fsa4480_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .max_register = FSA4480_MAX_REGISTER, > + /* Accesses only done under fsa4480->lock */ > + .disable_locking = true, > +}; > + > +static int fsa4480_switch_set(struct typec_switch_dev *sw, > + enum typec_orientation orientation) > +{ > + struct fsa4480 *fsa = typec_switch_get_drvdata(sw); > + u8 new_sel; > + > + mutex_lock(&fsa->lock); > + new_sel = FSA4480_SEL_USB; > + if (orientation == TYPEC_ORIENTATION_REVERSE) > + new_sel |= FSA4480_SEL_SBU_REVERSE; > + > + if (new_sel == fsa->cur_select) > + goto out_unlock; > + > + if (fsa->cur_enable & FSA4480_ENABLE_SBU) { > + /* Disable SBU output while re-configuring the switch */ > + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, > + fsa->cur_enable & ~FSA4480_ENABLE_SBU); > + > + /* 35us to allow the SBU switch to turn off */ > + usleep_range(35, 1000); > + } > + > + regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel); > + fsa->cur_select = new_sel; > + > + if (fsa->cur_enable & FSA4480_ENABLE_SBU) { > + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable); > + > + /* 15us to allow the SBU switch to turn on again */ > + usleep_range(15, 1000); > + } > + > +out_unlock: > + mutex_unlock(&fsa->lock); > + > + return 0; > +} > + > +static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) > +{ > + struct fsa4480 *fsa = typec_mux_get_drvdata(mux); > + u8 new_enable; > + > + mutex_lock(&fsa->lock); > + > + new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB; > + if (state->mode >= TYPEC_DP_STATE_A) > + new_enable |= FSA4480_ENABLE_SBU; > + > + if (new_enable == fsa->cur_enable) > + goto out_unlock; > + > + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable); > + fsa->cur_enable = new_enable; > + > + if (new_enable & FSA4480_ENABLE_SBU) { > + /* 15us to allow the SBU switch to turn off */ > + usleep_range(15, 1000); > + } > + > +out_unlock: > + mutex_unlock(&fsa->lock); > + > + return 0; > +} > + > +static int fsa4480_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct typec_switch_desc sw_desc = { }; > + struct typec_mux_desc mux_desc = { }; > + struct fsa4480 *fsa; > + > + fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL); > + if (!fsa) > + return -ENOMEM; > + > + fsa->client = client; > + mutex_init(&fsa->lock); > + > + fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config); > + if (IS_ERR(fsa->regmap)) > + return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n"); > + > + fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB; > + fsa->cur_select = FSA4480_SEL_USB; > + > + /* set default settings */ > + regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00); > + regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00); > + regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00); > + regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00); > + regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00); > + regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00); > + regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00); > + regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00); > + regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09); > + regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select); > + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable); > + > + sw_desc.drvdata = fsa; > + sw_desc.fwnode = dev_fwnode(dev); > + sw_desc.set = fsa4480_switch_set; > + > + fsa->sw = typec_switch_register(dev, &sw_desc); > + if (IS_ERR(fsa->sw)) > + return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n"); > + > + mux_desc.drvdata = fsa; > + mux_desc.fwnode = dev_fwnode(dev); > + mux_desc.set = fsa4480_mux_set; > + > + fsa->mux = typec_mux_register(dev, &mux_desc); > + if (IS_ERR(fsa->mux)) { > + typec_switch_unregister(fsa->sw); > + return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n"); > + } > + > + i2c_set_clientdata(client, fsa); > + return 0; > +} > + > +static int fsa4480_remove(struct i2c_client *client) > +{ > + struct fsa4480 *fsa = i2c_get_clientdata(client); > + > + typec_mux_unregister(fsa->mux); > + typec_switch_unregister(fsa->sw); > + > + return 0; > +} > + > +static const struct i2c_device_id fsa4480_table[] = { > + { "fsa4480" }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, fsa4480_table); > + > +static const struct of_device_id fsa4480_of_table[] = { > + { .compatible = "fcs,fsa4480" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, fsa4480_of_table); > + > +static struct i2c_driver fsa4480_driver = { > + .driver = { > + .name = "fsa4480", > + .of_match_table = fsa4480_of_table, > + }, > + .probe_new = fsa4480_probe, > + .remove = fsa4480_remove, > + .id_table = fsa4480_table, > +}; > +module_i2c_driver(fsa4480_driver); > + > +MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.35.1
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index edead555835e..5eb2c17d72c1 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -2,6 +2,16 @@ menu "USB Type-C Multiplexer/DeMultiplexer Switch support" +config TYPEC_MUX_FSA4480 + tristate "ON Semi FSA4480 Analog Audio Switch driver" + depends on I2C + select REGMAP_I2C + help + Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which + provides support for muxing analog audio and sideband signals on a + common USB Type-C connector. + If compiled as a module, the module will be named fsa4480. + config TYPEC_MUX_PI3USB30532 tristate "Pericom PI3USB30532 Type-C cross switch driver" depends on I2C diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile index 280a6f553115..e52a56c16bfb 100644 --- a/drivers/usb/typec/mux/Makefile +++ b/drivers/usb/typec/mux/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c new file mode 100644 index 000000000000..6184f5367190 --- /dev/null +++ b/drivers/usb/typec/mux/fsa4480.c @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021-2022 Linaro Ltd. + * Copyright (C) 2018-2020 The Linux Foundation + */ + +#include <linux/bits.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> + +#define FSA4480_SWITCH_ENABLE 0x04 +#define FSA4480_SWITCH_SELECT 0x05 +#define FSA4480_SWITCH_STATUS1 0x07 +#define FSA4480_SLOW_L 0x08 +#define FSA4480_SLOW_R 0x09 +#define FSA4480_SLOW_MIC 0x0a +#define FSA4480_SLOW_SENSE 0x0b +#define FSA4480_SLOW_GND 0x0c +#define FSA4480_DELAY_L_R 0x0d +#define FSA4480_DELAY_L_MIC 0x0e +#define FSA4480_DELAY_L_SENSE 0x0f +#define FSA4480_DELAY_L_AGND 0x10 +#define FSA4480_RESET 0x1e +#define FSA4480_MAX_REGISTER 0x1f + +#define FSA4480_ENABLE_DEVICE BIT(7) +#define FSA4480_ENABLE_SBU GENMASK(6, 5) +#define FSA4480_ENABLE_USB GENMASK(4, 3) + +#define FSA4480_SEL_SBU_REVERSE GENMASK(6, 5) +#define FSA4480_SEL_USB GENMASK(4, 3) + +struct fsa4480 { + struct i2c_client *client; + + /* used to serialize concurrent change requests */ + struct mutex lock; + + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; + + struct regmap *regmap; + + u8 cur_enable; + u8 cur_select; +}; + +static const struct regmap_config fsa4480_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = FSA4480_MAX_REGISTER, + /* Accesses only done under fsa4480->lock */ + .disable_locking = true, +}; + +static int fsa4480_switch_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct fsa4480 *fsa = typec_switch_get_drvdata(sw); + u8 new_sel; + + mutex_lock(&fsa->lock); + new_sel = FSA4480_SEL_USB; + if (orientation == TYPEC_ORIENTATION_REVERSE) + new_sel |= FSA4480_SEL_SBU_REVERSE; + + if (new_sel == fsa->cur_select) + goto out_unlock; + + if (fsa->cur_enable & FSA4480_ENABLE_SBU) { + /* Disable SBU output while re-configuring the switch */ + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, + fsa->cur_enable & ~FSA4480_ENABLE_SBU); + + /* 35us to allow the SBU switch to turn off */ + usleep_range(35, 1000); + } + + regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel); + fsa->cur_select = new_sel; + + if (fsa->cur_enable & FSA4480_ENABLE_SBU) { + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable); + + /* 15us to allow the SBU switch to turn on again */ + usleep_range(15, 1000); + } + +out_unlock: + mutex_unlock(&fsa->lock); + + return 0; +} + +static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) +{ + struct fsa4480 *fsa = typec_mux_get_drvdata(mux); + u8 new_enable; + + mutex_lock(&fsa->lock); + + new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB; + if (state->mode >= TYPEC_DP_STATE_A) + new_enable |= FSA4480_ENABLE_SBU; + + if (new_enable == fsa->cur_enable) + goto out_unlock; + + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable); + fsa->cur_enable = new_enable; + + if (new_enable & FSA4480_ENABLE_SBU) { + /* 15us to allow the SBU switch to turn off */ + usleep_range(15, 1000); + } + +out_unlock: + mutex_unlock(&fsa->lock); + + return 0; +} + +static int fsa4480_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + struct fsa4480 *fsa; + + fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL); + if (!fsa) + return -ENOMEM; + + fsa->client = client; + mutex_init(&fsa->lock); + + fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config); + if (IS_ERR(fsa->regmap)) + return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n"); + + fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB; + fsa->cur_select = FSA4480_SEL_USB; + + /* set default settings */ + regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00); + regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00); + regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09); + regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select); + regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable); + + sw_desc.drvdata = fsa; + sw_desc.fwnode = dev_fwnode(dev); + sw_desc.set = fsa4480_switch_set; + + fsa->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(fsa->sw)) + return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n"); + + mux_desc.drvdata = fsa; + mux_desc.fwnode = dev_fwnode(dev); + mux_desc.set = fsa4480_mux_set; + + fsa->mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(fsa->mux)) { + typec_switch_unregister(fsa->sw); + return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n"); + } + + i2c_set_clientdata(client, fsa); + return 0; +} + +static int fsa4480_remove(struct i2c_client *client) +{ + struct fsa4480 *fsa = i2c_get_clientdata(client); + + typec_mux_unregister(fsa->mux); + typec_switch_unregister(fsa->sw); + + return 0; +} + +static const struct i2c_device_id fsa4480_table[] = { + { "fsa4480" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fsa4480_table); + +static const struct of_device_id fsa4480_of_table[] = { + { .compatible = "fcs,fsa4480" }, + { } +}; +MODULE_DEVICE_TABLE(of, fsa4480_of_table); + +static struct i2c_driver fsa4480_driver = { + .driver = { + .name = "fsa4480", + .of_match_table = fsa4480_of_table, + }, + .probe_new = fsa4480_probe, + .remove = fsa4480_remove, + .id_table = fsa4480_table, +}; +module_i2c_driver(fsa4480_driver); + +MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver"); +MODULE_LICENSE("GPL v2");
The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with support for analog audio headsets. It allows sharing a common USB Type-C port to pass USB2.0 signal, analog audio, sideband use wires and analog microphone signal. Due to lacking upstream audio support for testing, the audio muxing is left untouched, but implementation of muxing the SBU lines is provided as a pair of Type-C mux and switch devices. This provides the necessary support for enabling the DisplayPort altmode on devices with this circuit. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v4: - Disable locking of the regmap - Use dev_fwnode() instead of explicit dereference drivers/usb/typec/mux/Kconfig | 10 ++ drivers/usb/typec/mux/Makefile | 1 + drivers/usb/typec/mux/fsa4480.c | 218 ++++++++++++++++++++++++++++++++ 3 files changed, 229 insertions(+) create mode 100644 drivers/usb/typec/mux/fsa4480.c