Message ID | 20220422230013.1332993-1-bjorn.andersson@linaro.org (mailing list archive) |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | [v2,1/2] dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings | expand |
Quoting Bjorn Andersson (2022-04-22 16:00:12) > Add binding for the Qualcomm SC8280XP Global Clock controller. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Why no cover letter? > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml > new file mode 100644 > index 000000000000..44e5f0d0a795 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml > @@ -0,0 +1,199 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@linaro.org> > + > +description: | > + Qualcomm global clock control module which supports the clocks, resets and > + power domains on SC8280xp. > + > + See also: > + - dt-bindings/clock/qcom,gcc-sc8280xp.h > + > +properties: > + compatible: > + const: qcom,gcc-sc8280xp > + > + clocks: > + items: > + - description: XO reference clock "clock" is redundant in all these descriptions. Please remove. > + - description: Sleep clock > + - description: UFS memory first RX symbol clock > + - description: UFS memory second RX symbol clock > + - description: UFS memory first TX symbol clock > + - description: UFS card first RX symbol clock > + - description: UFS card second RX symbol clock > + - description: UFS card first TX symbol clock > + - description: Primary USB SuperSpeed pipe clock > + - description: gcc_usb4_phy_pipegmux_clk_src > + - description: gcc_usb4_phy_dp_gmux_clk_src > + - description: gcc_usb4_phy_sys_pipegmux_clk_src > + - description: usb4_phy_gcc_usb4_pcie_pipe_clk > + - description: usb4_phy_gcc_usb4rtr_max_pipe_clk > + - description: Primary USB4 RX0 clock > + - description: Primary USB4 RX1 clock > + - description: Secondary USB SuperSpeed pipe clock > + - description: gcc_usb4_1_phy_pipegmux_clk_src > + - description: gcc_usb4_1_phy_dp_gmux_clk_src > + - description: gcc_usb4_1_phy_sys_pipegmux_clk_src > + - description: usb4_1_phy_gcc_usb4_pcie_pipe_clk > + - description: usb4_1_phy_gcc_usb4rtr_max_pipe_clk > + - description: Secondary USB4 RX0 clock > + - description: Secondary USB4 RX0 clock > + - description: Multiport USB first SupserSpeed pipe clock > + - description: Multiport USB second SuperSpeed pipe clock > + - description: PCIe 2a pipe clock > + - description: PCIe 2b pipe clock > + - description: PCIe 3a pipe clock > + - description: PCIe 3b pipe clock > + - description: PCIe 4 pipe clock > + - description: First EMAC controller reference clock > + - description: Second EMAC controller reference clock > + > + clock-names: > + items: > + - const: bi_tcxo > + - const: sleep_clk And "_clk" postfix is redundant in all these strings. Remove? > + - const: ufs_phy_rx_symbol_0_clk > + - const: ufs_phy_rx_symbol_1_clk > + - const: ufs_phy_tx_symbol_0_clk > + - const: ufs_card_rx_symbol_0_clk > + - const: ufs_card_rx_symbol_1_clk > + - const: ufs_card_tx_symbol_0_clk > + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk > + - const: gcc_usb4_phy_pipegmux_clk_src > + - const: gcc_usb4_phy_dp_gmux_clk_src > + - const: gcc_usb4_phy_sys_pipegmux_clk_src > + - const: usb4_phy_gcc_usb4_pcie_pipe_clk > + - const: usb4_phy_gcc_usb4rtr_max_pipe_clk > + - const: qusb4phy_gcc_usb4_rx0_clk > + - const: qusb4phy_gcc_usb4_rx1_clk > + - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk
Quoting Bjorn Andersson (2022-04-22 16:00:13) > diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c > new file mode 100644 > index 000000000000..16bfe62efca2 > --- /dev/null > +++ b/drivers/clk/qcom/gcc-sc8280xp.c > @@ -0,0 +1,7451 @@ [...] > +static struct clk_branch gcc_video_vcodec_throttle_clk = { > + .halt_reg = 0x28020, > + .halt_check = BRANCH_HALT_SKIP, > + .hwcg_reg = 0x28020, > + .hwcg_bit = 1, > + .clkr = { > + .enable_reg = 0x28020, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ The clk_init_data can be const too, right? > + .name = "gcc_video_vcodec_throttle_clk", > + .ops = &clk_branch2_ops, > + }, > + }, > +};
On Fri 22 Apr 18:48 PDT 2022, Stephen Boyd wrote: > Quoting Bjorn Andersson (2022-04-22 16:00:12) > > Add binding for the Qualcomm SC8280XP Global Clock controller. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Why no cover letter? > I didn't have anything useful to write in it. Will provide you one in the future... > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml > > new file mode 100644 > > index 000000000000..44e5f0d0a795 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml > > @@ -0,0 +1,199 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp > > + > > +maintainers: > > + - Bjorn Andersson <bjorn.andersson@linaro.org> > > + > > +description: | > > + Qualcomm global clock control module which supports the clocks, resets and > > + power domains on SC8280xp. > > + > > + See also: > > + - dt-bindings/clock/qcom,gcc-sc8280xp.h > > + > > +properties: > > + compatible: > > + const: qcom,gcc-sc8280xp > > + > > + clocks: > > + items: > > + - description: XO reference clock > > "clock" is redundant in all these descriptions. Please remove. > You don't think it's a little bit odd to have description such as "Sleep", "PCIe 2a pipe" or First EMAC controller reference"? I mean I agree that it's obviously clocks we're talking about, but to me that makes it seems like the descriptions are cut short, just for the sake of avoiding "clock". > > + - description: Sleep clock > > + - description: UFS memory first RX symbol clock > > + - description: UFS memory second RX symbol clock > > + - description: UFS memory first TX symbol clock > > + - description: UFS card first RX symbol clock > > + - description: UFS card second RX symbol clock > > + - description: UFS card first TX symbol clock > > + - description: Primary USB SuperSpeed pipe clock > > + - description: gcc_usb4_phy_pipegmux_clk_src > > + - description: gcc_usb4_phy_dp_gmux_clk_src > > + - description: gcc_usb4_phy_sys_pipegmux_clk_src > > + - description: usb4_phy_gcc_usb4_pcie_pipe_clk > > + - description: usb4_phy_gcc_usb4rtr_max_pipe_clk > > + - description: Primary USB4 RX0 clock > > + - description: Primary USB4 RX1 clock > > + - description: Secondary USB SuperSpeed pipe clock > > + - description: gcc_usb4_1_phy_pipegmux_clk_src > > + - description: gcc_usb4_1_phy_dp_gmux_clk_src > > + - description: gcc_usb4_1_phy_sys_pipegmux_clk_src > > + - description: usb4_1_phy_gcc_usb4_pcie_pipe_clk > > + - description: usb4_1_phy_gcc_usb4rtr_max_pipe_clk > > + - description: Secondary USB4 RX0 clock > > + - description: Secondary USB4 RX0 clock > > + - description: Multiport USB first SupserSpeed pipe clock > > + - description: Multiport USB second SuperSpeed pipe clock > > + - description: PCIe 2a pipe clock > > + - description: PCIe 2b pipe clock > > + - description: PCIe 3a pipe clock > > + - description: PCIe 3b pipe clock > > + - description: PCIe 4 pipe clock > > + - description: First EMAC controller reference clock > > + - description: Second EMAC controller reference clock > > + > > + clock-names: > > + items: > > + - const: bi_tcxo > > + - const: sleep_clk > > And "_clk" postfix is redundant in all these strings. Remove? > In this case I think they should include _clk, as they actually matches the clock names in the documentation. Regards, Bjorn > > + - const: ufs_phy_rx_symbol_0_clk > > + - const: ufs_phy_rx_symbol_1_clk > > + - const: ufs_phy_tx_symbol_0_clk > > + - const: ufs_card_rx_symbol_0_clk > > + - const: ufs_card_rx_symbol_1_clk > > + - const: ufs_card_tx_symbol_0_clk > > + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk > > + - const: gcc_usb4_phy_pipegmux_clk_src > > + - const: gcc_usb4_phy_dp_gmux_clk_src > > + - const: gcc_usb4_phy_sys_pipegmux_clk_src > > + - const: usb4_phy_gcc_usb4_pcie_pipe_clk > > + - const: usb4_phy_gcc_usb4rtr_max_pipe_clk > > + - const: qusb4phy_gcc_usb4_rx0_clk > > + - const: qusb4phy_gcc_usb4_rx1_clk > > + - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk
Quoting Bjorn Andersson (2022-04-22 20:02:57) > On Fri 22 Apr 18:48 PDT 2022, Stephen Boyd wrote: > > > Quoting Bjorn Andersson (2022-04-22 16:00:12) > > > Add binding for the Qualcomm SC8280XP Global Clock controller. > > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > > Why no cover letter? > > > > I didn't have anything useful to write in it. Will provide you one in > the future... Thanks! > > > + clocks: > > > + items: > > > + - description: XO reference clock > > > > "clock" is redundant in all these descriptions. Please remove. > > > > You don't think it's a little bit odd to have description such as > "Sleep", "PCIe 2a pipe" or First EMAC controller reference"? > > I mean I agree that it's obviously clocks we're talking about, but to me > that makes it seems like the descriptions are cut short, just for the > sake of avoiding "clock". Alright, keeping clock is OK as long as > > > > + - description: Sleep clock > > > + - description: UFS memory first RX symbol clock > > > + - description: UFS memory second RX symbol clock > > > + - description: UFS memory first TX symbol clock > > > + - description: UFS card first RX symbol clock > > > + - description: UFS card second RX symbol clock > > > + - description: UFS card first TX symbol clock > > > + - description: Primary USB SuperSpeed pipe clock > > > + - description: gcc_usb4_phy_pipegmux_clk_src there is a better name for this and the other non-word descriptions. USB4 phy pipe gmux clock source? > > > + - description: gcc_usb4_phy_dp_gmux_clk_src > > > + - description: gcc_usb4_phy_sys_pipegmux_clk_src > > > + - description: usb4_phy_gcc_usb4_pcie_pipe_clk > > > + - description: usb4_phy_gcc_usb4rtr_max_pipe_clk > > > + - description: Primary USB4 RX0 clock > > > + - description: Primary USB4 RX1 clock > > > + - description: Secondary USB SuperSpeed pipe clock > > > + - description: gcc_usb4_1_phy_pipegmux_clk_src > > > + - description: gcc_usb4_1_phy_dp_gmux_clk_src > > > + - description: gcc_usb4_1_phy_sys_pipegmux_clk_src > > > + - description: usb4_1_phy_gcc_usb4_pcie_pipe_clk > > > + - description: usb4_1_phy_gcc_usb4rtr_max_pipe_clk > > > + - description: Secondary USB4 RX0 clock > > > + - description: Secondary USB4 RX0 clock > > > + - description: Multiport USB first SupserSpeed pipe clock > > > + - description: Multiport USB second SuperSpeed pipe clock > > > + - description: PCIe 2a pipe clock > > > + - description: PCIe 2b pipe clock > > > + - description: PCIe 3a pipe clock > > > + - description: PCIe 3b pipe clock > > > + - description: PCIe 4 pipe clock > > > + - description: First EMAC controller reference clock > > > + - description: Second EMAC controller reference clock > > > + > > > + clock-names: > > > + items: > > > + - const: bi_tcxo > > > + - const: sleep_clk > > > > And "_clk" postfix is redundant in all these strings. Remove? > > > > In this case I think they should include _clk, as they actually matches > the clock names in the documentation. > I'd really rather not have clock-names at all because we spend a bunch of time comparing strings with them when we could just as easily use a number.
On Fri 22 Apr 20:13 PDT 2022, Stephen Boyd wrote: > Quoting Bjorn Andersson (2022-04-22 20:02:57) > > On Fri 22 Apr 18:48 PDT 2022, Stephen Boyd wrote: > > > > > Quoting Bjorn Andersson (2022-04-22 16:00:12) > > > > Add binding for the Qualcomm SC8280XP Global Clock controller. > > > > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > > > > Why no cover letter? > > > > > > > I didn't have anything useful to write in it. Will provide you one in > > the future... > > Thanks! > > > > > + clocks: > > > > + items: > > > > + - description: XO reference clock > > > > > > "clock" is redundant in all these descriptions. Please remove. > > > > > > > You don't think it's a little bit odd to have description such as > > "Sleep", "PCIe 2a pipe" or First EMAC controller reference"? > > > > I mean I agree that it's obviously clocks we're talking about, but to me > > that makes it seems like the descriptions are cut short, just for the > > sake of avoiding "clock". > > Alright, keeping clock is OK as long as > > > > > > > + - description: Sleep clock > > > > + - description: UFS memory first RX symbol clock > > > > + - description: UFS memory second RX symbol clock > > > > + - description: UFS memory first TX symbol clock > > > > + - description: UFS card first RX symbol clock > > > > + - description: UFS card second RX symbol clock > > > > + - description: UFS card first TX symbol clock > > > > + - description: Primary USB SuperSpeed pipe clock > > > > + - description: gcc_usb4_phy_pipegmux_clk_src > > there is a better name for this and the other non-word descriptions. > > USB4 phy pipe gmux clock source? > Sounds good, I'll make sure to fill these out. > > > > + - description: gcc_usb4_phy_dp_gmux_clk_src > > > > + - description: gcc_usb4_phy_sys_pipegmux_clk_src > > > > + - description: usb4_phy_gcc_usb4_pcie_pipe_clk > > > > + - description: usb4_phy_gcc_usb4rtr_max_pipe_clk > > > > + - description: Primary USB4 RX0 clock > > > > + - description: Primary USB4 RX1 clock > > > > + - description: Secondary USB SuperSpeed pipe clock > > > > + - description: gcc_usb4_1_phy_pipegmux_clk_src > > > > + - description: gcc_usb4_1_phy_dp_gmux_clk_src > > > > + - description: gcc_usb4_1_phy_sys_pipegmux_clk_src > > > > + - description: usb4_1_phy_gcc_usb4_pcie_pipe_clk > > > > + - description: usb4_1_phy_gcc_usb4rtr_max_pipe_clk > > > > + - description: Secondary USB4 RX0 clock > > > > + - description: Secondary USB4 RX0 clock > > > > + - description: Multiport USB first SupserSpeed pipe clock > > > > + - description: Multiport USB second SuperSpeed pipe clock > > > > + - description: PCIe 2a pipe clock > > > > + - description: PCIe 2b pipe clock > > > > + - description: PCIe 3a pipe clock > > > > + - description: PCIe 3b pipe clock > > > > + - description: PCIe 4 pipe clock > > > > + - description: First EMAC controller reference clock > > > > + - description: Second EMAC controller reference clock > > > > + > > > > + clock-names: > > > > + items: > > > > + - const: bi_tcxo > > > > + - const: sleep_clk > > > > > > And "_clk" postfix is redundant in all these strings. Remove? > > > > > > > In this case I think they should include _clk, as they actually matches > > the clock names in the documentation. > > > > I'd really rather not have clock-names at all because we spend a bunch > of time comparing strings with them when we could just as easily use > a number. I know that you would like to get rid of the clock-names for the clock controllers. I've looked at it since and while it will be faster to execute I still feel that it's going to be harder to write and maintain. E.g. look at gcc_pcie_4_pipe_clk_src, its parents today are pcie_4_pipe_clk and bi_tcxo. Something I can reason about being correct or not. If we ditch the clock-names I will have: static const struct clk_parent_data gcc_parent_data_14[] = { { .index = 30 }, { .index = 0 }, }; Generally we would perhaps use some compile time constant, but that won't work here because we're talking about the index in the clocks array in the yaml. But perhaps I'm missing something that would make this manageable? Regards, Bjorn
Quoting Bjorn Andersson (2022-04-22 20:43:18) > On Fri 22 Apr 20:13 PDT 2022, Stephen Boyd wrote: > > > > I'd really rather not have clock-names at all because we spend a bunch > > of time comparing strings with them when we could just as easily use > > a number. > > I know that you would like to get rid of the clock-names for the clock > controllers. I've looked at it since and while it will be faster to > execute I still feel that it's going to be harder to write and maintain. > > E.g. look at gcc_pcie_4_pipe_clk_src, its parents today are > pcie_4_pipe_clk and bi_tcxo. Something I can reason about being correct > or not. > > If we ditch the clock-names I will have: > > static const struct clk_parent_data gcc_parent_data_14[] = { > { .index = 30 }, > { .index = 0 }, Those numbers could have some #define. { .index = PCIE_4_PIPE_CLK_DT } { .index = BI_TCXO_DT } > }; > > Generally we would perhaps use some compile time constant, but that > won't work here because we're talking about the index in the clocks > array in the yaml. > > > But perhaps I'm missing something that would make this manageable? I dunno. Maybe a macro in the dt-binding header could be used to specify the 'clocks' property of the DT node that is providing the other side? The idea is to make a bunch of macros that insert the arguments of the macro in the right place for the clocks property and then define the order of arguments otherwise. It would be similar to how CREATE_TRACE_POINTS is used in include/trace/define_trace.h In the dt-bindings/qcom,gcc-soc.h file: #ifdef IN_DTSI #undef GCC_DT_NODE_CLOCKS #define GCC_DT_NODE_CLOCKS clocks = <BI_TCXO_DT>, <SLEEP_CLK_DT>; #endif /* IN_DTSI */ #define BI_TCXO_DT 0 #define SLEEP_CLK_DT 1 And then in the SoC.dtsi file have #define IN_DTSI #include <dt-bindings/qcom,gcc-soc.h> #define BI_TCXO_DT &xo_board #define SLEEP_CLK_DT &sleep_clk ... clock-controller@a000000 { compatible = "qcom,gcc-soc"; reg = <0xa000000 0x10000>; GCC_DT_NODE_CLOCKS }; and then in drivers/clk/qcom/gcc-soc.c file: #include <dt-bindings/qcom,gcc-soc.h> static const struct clk_parent_data gcc_parent_data_14[] = { { .index = PCIE_4_PIPE_CLK_DT }, { .index = BI_TCXO_DT }, }; The benefit I see to this is that the index for each clock is in the header file (BI_TCXO_DT is 0) and it's next to the clocks property. Someone could still mess up the index based on where the macro is used in the clocks property though.
On 26/04/2022 01:34, Stephen Boyd wrote: > Quoting Bjorn Andersson (2022-04-22 20:43:18) >> On Fri 22 Apr 20:13 PDT 2022, Stephen Boyd wrote: >>> >>> I'd really rather not have clock-names at all because we spend a bunch >>> of time comparing strings with them when we could just as easily use >>> a number. >> >> I know that you would like to get rid of the clock-names for the clock >> controllers. I've looked at it since and while it will be faster to >> execute I still feel that it's going to be harder to write and maintain. >> >> E.g. look at gcc_pcie_4_pipe_clk_src, its parents today are >> pcie_4_pipe_clk and bi_tcxo. Something I can reason about being correct >> or not. >> >> If we ditch the clock-names I will have: >> >> static const struct clk_parent_data gcc_parent_data_14[] = { >> { .index = 30 }, >> { .index = 0 }, > > Those numbers could have some #define. > > { .index = PCIE_4_PIPE_CLK_DT } > { .index = BI_TCXO_DT } > >> }; >> >> Generally we would perhaps use some compile time constant, but that >> won't work here because we're talking about the index in the clocks >> array in the yaml. >> >> >> But perhaps I'm missing something that would make this manageable? > > I dunno. Maybe a macro in the dt-binding header could be used to specify > the 'clocks' property of the DT node that is providing the other side? > The idea is to make a bunch of macros that insert the arguments of the > macro in the right place for the clocks property and then define the > order of arguments otherwise. It would be similar to how > CREATE_TRACE_POINTS is used in include/trace/define_trace.h > > In the dt-bindings/qcom,gcc-soc.h file: > > #ifdef IN_DTSI > > #undef GCC_DT_NODE_CLOCKS > #define GCC_DT_NODE_CLOCKS > clocks = <BI_TCXO_DT>, > <SLEEP_CLK_DT>; > > #endif /* IN_DTSI */ > > #define BI_TCXO_DT 0 > #define SLEEP_CLK_DT 1 Isn't this being an overkill, to define exact properties in the bindings header? Also this would mean that we'd have to add dt-binding headers for all _consumers_ of clocks. And to make things more complex, e.g. for PCIe devices different instances of the device would use different amount of clocks. This would mean that we'd have to define SM8250_PCI0_CLOCKS, SM8250_PCIE1_CLOCKS and SM8250_PCIE2_CLOCKS. If we were to switch to this fragile path of using indices (yes I consider it to be very fragile), I'd consider something like the following to work in the platform dtsi file: clocks = BEGIN_CLOCK CLOCK(BI_TCXO_DT, &bi_tcxo) CLOCK(SLEEP_CLK_DT, &sleep_clk) END_CLOCK; While the following should give an error: clocks = BEGIN_CLOCK CLOCK(SLEEP_CLK_DT, &sleep_clk) CLOCK(BI_TCXO_DT, &bi_tcxo) END_CLOCK; I think we can make this error out by using some additional tool (or additional preprocessor pass over the sources) > And then in the SoC.dtsi file have > > #define IN_DTSI > #include <dt-bindings/qcom,gcc-soc.h> > > #define BI_TCXO_DT &xo_board > #define SLEEP_CLK_DT &sleep_clk > > ... > > clock-controller@a000000 { > compatible = "qcom,gcc-soc"; > reg = <0xa000000 0x10000>; > GCC_DT_NODE_CLOCKS > }; > > > and then in drivers/clk/qcom/gcc-soc.c file: > > #include <dt-bindings/qcom,gcc-soc.h> > > static const struct clk_parent_data gcc_parent_data_14[] = { > { .index = PCIE_4_PIPE_CLK_DT }, > { .index = BI_TCXO_DT }, > }; > > The benefit I see to this is that the index for each clock is in the > header file (BI_TCXO_DT is 0) and it's next to the clocks property. > Someone could still mess up the index based on where the macro is used > in the clocks property though. And actually might I suggest an alternative approach to manually using indices everywhere? What about spending the time once during the boot to convert .fw_name and clock_names to parent indices during clock registration and then using them for all the further operations?
On Thu 28 Apr 08:44 PDT 2022, Dmitry Baryshkov wrote: > On 26/04/2022 01:34, Stephen Boyd wrote: > > Quoting Bjorn Andersson (2022-04-22 20:43:18) > > > On Fri 22 Apr 20:13 PDT 2022, Stephen Boyd wrote: > > > > > > > > I'd really rather not have clock-names at all because we spend a bunch > > > > of time comparing strings with them when we could just as easily use > > > > a number. > > > > > > I know that you would like to get rid of the clock-names for the clock > > > controllers. I've looked at it since and while it will be faster to > > > execute I still feel that it's going to be harder to write and maintain. > > > > > > E.g. look at gcc_pcie_4_pipe_clk_src, its parents today are > > > pcie_4_pipe_clk and bi_tcxo. Something I can reason about being correct > > > or not. > > > > > > If we ditch the clock-names I will have: > > > > > > static const struct clk_parent_data gcc_parent_data_14[] = { > > > { .index = 30 }, > > > { .index = 0 }, > > > > Those numbers could have some #define. > > > > { .index = PCIE_4_PIPE_CLK_DT } > > { .index = BI_TCXO_DT } > > > > > }; > > > > > > Generally we would perhaps use some compile time constant, but that > > > won't work here because we're talking about the index in the clocks > > > array in the yaml. > > > > > > > > > But perhaps I'm missing something that would make this manageable? > > > > I dunno. Maybe a macro in the dt-binding header could be used to specify > > the 'clocks' property of the DT node that is providing the other side? > > The idea is to make a bunch of macros that insert the arguments of the > > macro in the right place for the clocks property and then define the > > order of arguments otherwise. It would be similar to how > > CREATE_TRACE_POINTS is used in include/trace/define_trace.h > > > > In the dt-bindings/qcom,gcc-soc.h file: > > > > #ifdef IN_DTSI > > > > #undef GCC_DT_NODE_CLOCKS > > #define GCC_DT_NODE_CLOCKS > > clocks = <BI_TCXO_DT>, > > <SLEEP_CLK_DT>; > > > > #endif /* IN_DTSI */ > > > > #define BI_TCXO_DT 0 > > #define SLEEP_CLK_DT 1 BI_TCXO_DT is not the value, its the index of the entry in the clocks array. And the actual values of the clock controller's clocks property is not a property of the clock controller, but the system definition. I.e. that should be clear and explicitly expressed in the dts. > > Isn't this being an overkill, to define exact properties in the bindings > header? Also this would mean that we'd have to add dt-binding headers for > all _consumers_ of clocks. And to make things more complex, e.g. for PCIe > devices different instances of the device would use different amount of > clocks. This would mean that we'd have to define SM8250_PCI0_CLOCKS, > SM8250_PCIE1_CLOCKS and SM8250_PCIE2_CLOCKS. > > > If we were to switch to this fragile path of using indices (yes I consider > it to be very fragile), I'd consider something like the following to work in > the platform dtsi file: > > clocks = > BEGIN_CLOCK > CLOCK(BI_TCXO_DT, &bi_tcxo) > CLOCK(SLEEP_CLK_DT, &sleep_clk) > END_CLOCK; > > While the following should give an error: > clocks = > BEGIN_CLOCK > CLOCK(SLEEP_CLK_DT, &sleep_clk) > CLOCK(BI_TCXO_DT, &bi_tcxo) > END_CLOCK; > > I think we can make this error out by using some additional tool (or > additional preprocessor pass over the sources) > Let's not invent some magical syntax for describing the clocks in the DT. These macros can't expand to sparse arrays anyways, so iiuc this would give a sense that the ordering might not be significant, when it really is. > > And then in the SoC.dtsi file have > > > > #define IN_DTSI > > #include <dt-bindings/qcom,gcc-soc.h> > > > > #define BI_TCXO_DT &xo_board > > #define SLEEP_CLK_DT &sleep_clk > > > > ... > > > > clock-controller@a000000 { > > compatible = "qcom,gcc-soc"; > > reg = <0xa000000 0x10000>; > > GCC_DT_NODE_CLOCKS > > }; > > > > > > and then in drivers/clk/qcom/gcc-soc.c file: > > > > #include <dt-bindings/qcom,gcc-soc.h> > > > > static const struct clk_parent_data gcc_parent_data_14[] = { > > { .index = PCIE_4_PIPE_CLK_DT }, > > { .index = BI_TCXO_DT }, > > }; > > > > The benefit I see to this is that the index for each clock is in the > > header file (BI_TCXO_DT is 0) and it's next to the clocks property. > > Someone could still mess up the index based on where the macro is used > > in the clocks property though. > > And actually might I suggest an alternative approach to manually using > indices everywhere? What about spending the time once during the boot to > convert .fw_name and clock_names to parent indices during clock registration > and then using them for all the further operations? > I'm pretty sure that's what clk_core_fill_parent_index() already does. Regards, Bjorn
On Thu, 28 Apr 2022 at 18:59, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Thu 28 Apr 08:44 PDT 2022, Dmitry Baryshkov wrote: > > > On 26/04/2022 01:34, Stephen Boyd wrote: > > > Quoting Bjorn Andersson (2022-04-22 20:43:18) > > > > On Fri 22 Apr 20:13 PDT 2022, Stephen Boyd wrote: > > > > > > > > > > I'd really rather not have clock-names at all because we spend a bunch > > > > > of time comparing strings with them when we could just as easily use > > > > > a number. > > > > > > > > I know that you would like to get rid of the clock-names for the clock > > > > controllers. I've looked at it since and while it will be faster to > > > > execute I still feel that it's going to be harder to write and maintain. > > > > > > > > E.g. look at gcc_pcie_4_pipe_clk_src, its parents today are > > > > pcie_4_pipe_clk and bi_tcxo. Something I can reason about being correct > > > > or not. > > > > > > > > If we ditch the clock-names I will have: > > > > > > > > static const struct clk_parent_data gcc_parent_data_14[] = { > > > > { .index = 30 }, > > > > { .index = 0 }, > > > > > > Those numbers could have some #define. > > > > > > { .index = PCIE_4_PIPE_CLK_DT } > > > { .index = BI_TCXO_DT } > > > > > > > }; > > > > > > > > Generally we would perhaps use some compile time constant, but that > > > > won't work here because we're talking about the index in the clocks > > > > array in the yaml. > > > > > > > > > > > > But perhaps I'm missing something that would make this manageable? > > > > > > I dunno. Maybe a macro in the dt-binding header could be used to specify > > > the 'clocks' property of the DT node that is providing the other side? > > > The idea is to make a bunch of macros that insert the arguments of the > > > macro in the right place for the clocks property and then define the > > > order of arguments otherwise. It would be similar to how > > > CREATE_TRACE_POINTS is used in include/trace/define_trace.h > > > > > > In the dt-bindings/qcom,gcc-soc.h file: > > > > > > #ifdef IN_DTSI > > > > > > #undef GCC_DT_NODE_CLOCKS > > > #define GCC_DT_NODE_CLOCKS > > > clocks = <BI_TCXO_DT>, > > > <SLEEP_CLK_DT>; > > > > > > #endif /* IN_DTSI */ > > > > > > #define BI_TCXO_DT 0 > > > #define SLEEP_CLK_DT 1 > > BI_TCXO_DT is not the value, its the index of the entry in the clocks > array. And the actual values of the clock controller's clocks > property is not a property of the clock controller, but the system > definition. > > I.e. that should be clear and explicitly expressed in the dts. > > > > > Isn't this being an overkill, to define exact properties in the bindings > > header? Also this would mean that we'd have to add dt-binding headers for > > all _consumers_ of clocks. And to make things more complex, e.g. for PCIe > > devices different instances of the device would use different amount of > > clocks. This would mean that we'd have to define SM8250_PCI0_CLOCKS, > > SM8250_PCIE1_CLOCKS and SM8250_PCIE2_CLOCKS. > > > > > > If we were to switch to this fragile path of using indices (yes I consider > > it to be very fragile), I'd consider something like the following to work in > > the platform dtsi file: > > > > clocks = > > BEGIN_CLOCK > > CLOCK(BI_TCXO_DT, &bi_tcxo) > > CLOCK(SLEEP_CLK_DT, &sleep_clk) > > END_CLOCK; > > > > While the following should give an error: > > clocks = > > BEGIN_CLOCK > > CLOCK(SLEEP_CLK_DT, &sleep_clk) > > CLOCK(BI_TCXO_DT, &bi_tcxo) > > END_CLOCK; > > > > I think we can make this error out by using some additional tool (or > > additional preprocessor pass over the sources) > > > > Let's not invent some magical syntax for describing the clocks in the > DT. > > These macros can't expand to sparse arrays anyways, so iiuc this would > give a sense that the ordering might not be significant, when it really > is. > > > > And then in the SoC.dtsi file have > > > > > > #define IN_DTSI > > > #include <dt-bindings/qcom,gcc-soc.h> > > > > > > #define BI_TCXO_DT &xo_board > > > #define SLEEP_CLK_DT &sleep_clk > > > > > > ... > > > > > > clock-controller@a000000 { > > > compatible = "qcom,gcc-soc"; > > > reg = <0xa000000 0x10000>; > > > GCC_DT_NODE_CLOCKS > > > }; > > > > > > > > > and then in drivers/clk/qcom/gcc-soc.c file: > > > > > > #include <dt-bindings/qcom,gcc-soc.h> > > > > > > static const struct clk_parent_data gcc_parent_data_14[] = { > > > { .index = PCIE_4_PIPE_CLK_DT }, > > > { .index = BI_TCXO_DT }, > > > }; > > > > > > The benefit I see to this is that the index for each clock is in the > > > header file (BI_TCXO_DT is 0) and it's next to the clocks property. > > > Someone could still mess up the index based on where the macro is used > > > in the clocks property though. > > > > And actually might I suggest an alternative approach to manually using > > indices everywhere? What about spending the time once during the boot to > > convert .fw_name and clock_names to parent indices during clock registration > > and then using them for all the further operations? > > > > I'm pretty sure that's what clk_core_fill_parent_index() already does. In this case I think we should go for clock-name in the DT and auto-flled indices inside. Stephen, WDYT? Would that fix your concern for comparing strings each and every time?
On Thu 28 Apr 09:24 PDT 2022, Dmitry Baryshkov wrote: > On Thu, 28 Apr 2022 at 18:59, Bjorn Andersson > <bjorn.andersson@linaro.org> wrote: > > > > On Thu 28 Apr 08:44 PDT 2022, Dmitry Baryshkov wrote: > > > > > On 26/04/2022 01:34, Stephen Boyd wrote: > > > > Quoting Bjorn Andersson (2022-04-22 20:43:18) > > > > > On Fri 22 Apr 20:13 PDT 2022, Stephen Boyd wrote: > > > > > > > > > > > > I'd really rather not have clock-names at all because we spend a bunch > > > > > > of time comparing strings with them when we could just as easily use > > > > > > a number. > > > > > > > > > > I know that you would like to get rid of the clock-names for the clock > > > > > controllers. I've looked at it since and while it will be faster to > > > > > execute I still feel that it's going to be harder to write and maintain. > > > > > > > > > > E.g. look at gcc_pcie_4_pipe_clk_src, its parents today are > > > > > pcie_4_pipe_clk and bi_tcxo. Something I can reason about being correct > > > > > or not. > > > > > > > > > > If we ditch the clock-names I will have: > > > > > > > > > > static const struct clk_parent_data gcc_parent_data_14[] = { > > > > > { .index = 30 }, > > > > > { .index = 0 }, > > > > > > > > Those numbers could have some #define. > > > > > > > > { .index = PCIE_4_PIPE_CLK_DT } > > > > { .index = BI_TCXO_DT } > > > > > > > > > }; > > > > > > > > > > Generally we would perhaps use some compile time constant, but that > > > > > won't work here because we're talking about the index in the clocks > > > > > array in the yaml. > > > > > > > > > > > > > > > But perhaps I'm missing something that would make this manageable? > > > > > > > > I dunno. Maybe a macro in the dt-binding header could be used to specify > > > > the 'clocks' property of the DT node that is providing the other side? > > > > The idea is to make a bunch of macros that insert the arguments of the > > > > macro in the right place for the clocks property and then define the > > > > order of arguments otherwise. It would be similar to how > > > > CREATE_TRACE_POINTS is used in include/trace/define_trace.h > > > > > > > > In the dt-bindings/qcom,gcc-soc.h file: > > > > > > > > #ifdef IN_DTSI > > > > > > > > #undef GCC_DT_NODE_CLOCKS > > > > #define GCC_DT_NODE_CLOCKS > > > > clocks = <BI_TCXO_DT>, > > > > <SLEEP_CLK_DT>; > > > > > > > > #endif /* IN_DTSI */ > > > > > > > > #define BI_TCXO_DT 0 > > > > #define SLEEP_CLK_DT 1 > > > > BI_TCXO_DT is not the value, its the index of the entry in the clocks > > array. And the actual values of the clock controller's clocks > > property is not a property of the clock controller, but the system > > definition. > > > > I.e. that should be clear and explicitly expressed in the dts. > > > > > > > > Isn't this being an overkill, to define exact properties in the bindings > > > header? Also this would mean that we'd have to add dt-binding headers for > > > all _consumers_ of clocks. And to make things more complex, e.g. for PCIe > > > devices different instances of the device would use different amount of > > > clocks. This would mean that we'd have to define SM8250_PCI0_CLOCKS, > > > SM8250_PCIE1_CLOCKS and SM8250_PCIE2_CLOCKS. > > > > > > > > > If we were to switch to this fragile path of using indices (yes I consider > > > it to be very fragile), I'd consider something like the following to work in > > > the platform dtsi file: > > > > > > clocks = > > > BEGIN_CLOCK > > > CLOCK(BI_TCXO_DT, &bi_tcxo) > > > CLOCK(SLEEP_CLK_DT, &sleep_clk) > > > END_CLOCK; > > > > > > While the following should give an error: > > > clocks = > > > BEGIN_CLOCK > > > CLOCK(SLEEP_CLK_DT, &sleep_clk) > > > CLOCK(BI_TCXO_DT, &bi_tcxo) > > > END_CLOCK; > > > > > > I think we can make this error out by using some additional tool (or > > > additional preprocessor pass over the sources) > > > > > > > Let's not invent some magical syntax for describing the clocks in the > > DT. > > > > These macros can't expand to sparse arrays anyways, so iiuc this would > > give a sense that the ordering might not be significant, when it really > > is. > > > > > > And then in the SoC.dtsi file have > > > > > > > > #define IN_DTSI > > > > #include <dt-bindings/qcom,gcc-soc.h> > > > > > > > > #define BI_TCXO_DT &xo_board > > > > #define SLEEP_CLK_DT &sleep_clk > > > > > > > > ... > > > > > > > > clock-controller@a000000 { > > > > compatible = "qcom,gcc-soc"; > > > > reg = <0xa000000 0x10000>; > > > > GCC_DT_NODE_CLOCKS > > > > }; > > > > > > > > > > > > and then in drivers/clk/qcom/gcc-soc.c file: > > > > > > > > #include <dt-bindings/qcom,gcc-soc.h> > > > > > > > > static const struct clk_parent_data gcc_parent_data_14[] = { > > > > { .index = PCIE_4_PIPE_CLK_DT }, > > > > { .index = BI_TCXO_DT }, > > > > }; > > > > > > > > The benefit I see to this is that the index for each clock is in the > > > > header file (BI_TCXO_DT is 0) and it's next to the clocks property. > > > > Someone could still mess up the index based on where the macro is used > > > > in the clocks property though. > > > > > > And actually might I suggest an alternative approach to manually using > > > indices everywhere? What about spending the time once during the boot to > > > convert .fw_name and clock_names to parent indices during clock registration > > > and then using them for all the further operations? > > > > > > > I'm pretty sure that's what clk_core_fill_parent_index() already does. > > In this case I think we should go for clock-name in the DT and > auto-flled indices inside. Stephen, WDYT? Would that fix your concern > for comparing strings each and every time? > You mean, just continue doing what we've been doing lately with fw_name etc? That lookup is the one that Stephen wants to avoid. Regards, Bjorn
Quoting Bjorn Andersson (2022-04-28 12:12:49) > On Thu 28 Apr 09:24 PDT 2022, Dmitry Baryshkov wrote: > > > > > > > > > And actually might I suggest an alternative approach to manually using > > > > indices everywhere? What about spending the time once during the boot to > > > > convert .fw_name and clock_names to parent indices during clock registration > > > > and then using them for all the further operations? > > > > > > > > > > I'm pretty sure that's what clk_core_fill_parent_index() already does. > > > > In this case I think we should go for clock-name in the DT and > > auto-flled indices inside. Stephen, WDYT? Would that fix your concern > > for comparing strings each and every time? > > > > You mean, just continue doing what we've been doing lately with fw_name > etc? > > That lookup is the one that Stephen wants to avoid. > Right. Translating .fw_name to indices isn't a solution because I want to 1. Reduce the number of string comparisons 2. Shrink the kernel's data section by removing strings and having there still be strings works against both points.
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml new file mode 100644 index 000000000000..44e5f0d0a795 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC8280xp. + + See also: + - dt-bindings/clock/qcom,gcc-sc8280xp.h + +properties: + compatible: + const: qcom,gcc-sc8280xp + + clocks: + items: + - description: XO reference clock + - description: Sleep clock + - description: UFS memory first RX symbol clock + - description: UFS memory second RX symbol clock + - description: UFS memory first TX symbol clock + - description: UFS card first RX symbol clock + - description: UFS card second RX symbol clock + - description: UFS card first TX symbol clock + - description: Primary USB SuperSpeed pipe clock + - description: gcc_usb4_phy_pipegmux_clk_src + - description: gcc_usb4_phy_dp_gmux_clk_src + - description: gcc_usb4_phy_sys_pipegmux_clk_src + - description: usb4_phy_gcc_usb4_pcie_pipe_clk + - description: usb4_phy_gcc_usb4rtr_max_pipe_clk + - description: Primary USB4 RX0 clock + - description: Primary USB4 RX1 clock + - description: Secondary USB SuperSpeed pipe clock + - description: gcc_usb4_1_phy_pipegmux_clk_src + - description: gcc_usb4_1_phy_dp_gmux_clk_src + - description: gcc_usb4_1_phy_sys_pipegmux_clk_src + - description: usb4_1_phy_gcc_usb4_pcie_pipe_clk + - description: usb4_1_phy_gcc_usb4rtr_max_pipe_clk + - description: Secondary USB4 RX0 clock + - description: Secondary USB4 RX0 clock + - description: Multiport USB first SupserSpeed pipe clock + - description: Multiport USB second SuperSpeed pipe clock + - description: PCIe 2a pipe clock + - description: PCIe 2b pipe clock + - description: PCIe 3a pipe clock + - description: PCIe 3b pipe clock + - description: PCIe 4 pipe clock + - description: First EMAC controller reference clock + - description: Second EMAC controller reference clock + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: ufs_phy_rx_symbol_0_clk + - const: ufs_phy_rx_symbol_1_clk + - const: ufs_phy_tx_symbol_0_clk + - const: ufs_card_rx_symbol_0_clk + - const: ufs_card_rx_symbol_1_clk + - const: ufs_card_tx_symbol_0_clk + - const: usb3_phy_wrapper_gcc_usb30_pipe_clk + - const: gcc_usb4_phy_pipegmux_clk_src + - const: gcc_usb4_phy_dp_gmux_clk_src + - const: gcc_usb4_phy_sys_pipegmux_clk_src + - const: usb4_phy_gcc_usb4_pcie_pipe_clk + - const: usb4_phy_gcc_usb4rtr_max_pipe_clk + - const: qusb4phy_gcc_usb4_rx0_clk + - const: qusb4phy_gcc_usb4_rx1_clk + - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk + - const: gcc_usb4_1_phy_pipegmux_clk_src + - const: gcc_usb4_1_phy_dp_gmux_clk_src + - const: gcc_usb4_1_phy_sys_pipegmux_clk_src + - const: usb4_1_phy_gcc_usb4_pcie_pipe_clk + - const: usb4_1_phy_gcc_usb4rtr_max_pipe_clk + - const: qusb4phy_1_gcc_usb4_rx0_clk + - const: qusb4phy_1_gcc_usb4_rx1_clk + - const: usb3_uni_phy_mp_gcc_usb30_pipe_0_clk + - const: usb3_uni_phy_mp_gcc_usb30_pipe_1_clk + - const: pcie_2a_pipe_clk + - const: pcie_2b_pipe_clk + - const: pcie_3a_pipe_clk + - const: pcie_3b_pipe_clk + - const: pcie_4_pipe_clk + - const: rxc0_ref_clk + - const: rxc1_ref_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&ufs_phy_rx_symbol_0_clk>, + <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <&ufs_card_rx_symbol_0_clk>, + <&ufs_card_rx_symbol_1_clk>, + <&ufs_card_tx_symbol_0_clk>, + <&usb_0_ssphy>, + <&gcc_usb4_phy_pipegmux_clk_src>, + <&gcc_usb4_phy_dp_gmux_clk_src>, + <&gcc_usb4_phy_sys_pipegmux_clk_src>, + <&usb4_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_gcc_usb4_rx0_clk>, + <&qusb4phy_gcc_usb4_rx1_clk>, + <&usb_1_ssphy>, + <&gcc_usb4_1_phy_pipegmux_clk_src>, + <&gcc_usb4_1_phy_dp_gmux_clk_src>, + <&gcc_usb4_1_phy_sys_pipegmux_clk_src>, + <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_1_gcc_usb4_rx0_clk>, + <&qusb4phy_1_gcc_usb4_rx1_clk>, + <&usb_2_ssphy>, + <&usb_3_ssphy>, + <&pcie2a_lane>, + <&pcie2b_lane>, + <&pcie3a_lane>, + <&pcie3b_lane>, + <&pcie4_lane>, + <&rxc0_ref_clk>, + <&rxc1_ref_clk>; + clock-names = "bi_tcxo", + "sleep_clk", + "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "ufs_card_rx_symbol_0_clk", + "ufs_card_rx_symbol_1_clk", + "ufs_card_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk", + "gcc_usb4_phy_pipegmux_clk_src", + "gcc_usb4_phy_dp_gmux_clk_src", + "gcc_usb4_phy_sys_pipegmux_clk_src", + "usb4_phy_gcc_usb4_pcie_pipe_clk", + "usb4_phy_gcc_usb4rtr_max_pipe_clk", + "qusb4phy_gcc_usb4_rx0_clk", + "qusb4phy_gcc_usb4_rx1_clk", + "usb3_uni_phy_sec_gcc_usb30_pipe_clk", + "gcc_usb4_1_phy_pipegmux_clk_src", + "gcc_usb4_1_phy_dp_gmux_clk_src", + "gcc_usb4_1_phy_sys_pipegmux_clk_src", + "usb4_1_phy_gcc_usb4_pcie_pipe_clk", + "usb4_1_phy_gcc_usb4rtr_max_pipe_clk", + "qusb4phy_1_gcc_usb4_rx0_clk", + "qusb4phy_1_gcc_usb4_rx1_clk", + "usb3_uni_phy_mp_gcc_usb30_pipe_0_clk", + "usb3_uni_phy_mp_gcc_usb30_pipe_1_clk", + "pcie_2a_pipe_clk", + "pcie_2b_pipe_clk", + "pcie_3a_pipe_clk", + "pcie_3b_pipe_clk", + "pcie_4_pipe_clk", + "rxc0_ref_clk", + "rxc1_ref_clk"; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/include/dt-bindings/clock/qcom,gcc-sc8280xp.h b/include/dt-bindings/clock/qcom,gcc-sc8280xp.h new file mode 100644 index 000000000000..cb2fb638825c --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-sc8280xp.h @@ -0,0 +1,496 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Ltd. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_DIREWOLF_H +#define _DT_BINDINGS_CLK_QCOM_GCC_DIREWOLF_H + +/* GCC clocks */ +#define GCC_GPLL0 0 +#define GCC_GPLL0_OUT_EVEN 1 +#define GCC_GPLL2 2 +#define GCC_GPLL4 3 +#define GCC_GPLL7 4 +#define GCC_GPLL8 5 +#define GCC_GPLL9 6 +#define GCC_AGGRE_NOC_PCIE0_TUNNEL_AXI_CLK 7 +#define GCC_AGGRE_NOC_PCIE1_TUNNEL_AXI_CLK 8 +#define GCC_AGGRE_NOC_PCIE_4_AXI_CLK 9 +#define GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK 10 +#define GCC_AGGRE_UFS_CARD_AXI_CLK 11 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 12 +#define GCC_AGGRE_USB3_MP_AXI_CLK 13 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 14 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 15 +#define GCC_AGGRE_USB4_1_AXI_CLK 16 +#define GCC_AGGRE_USB4_AXI_CLK 17 +#define GCC_AGGRE_USB_NOC_AXI_CLK 18 +#define GCC_AGGRE_USB_NOC_NORTH_AXI_CLK 19 +#define GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK 20 +#define GCC_AHB2PHY0_CLK 21 +#define GCC_AHB2PHY2_CLK 22 +#define GCC_BOOT_ROM_AHB_CLK 23 +#define GCC_CAMERA_AHB_CLK 24 +#define GCC_CAMERA_HF_AXI_CLK 25 +#define GCC_CAMERA_SF_AXI_CLK 26 +#define GCC_CAMERA_THROTTLE_NRT_AXI_CLK 27 +#define GCC_CAMERA_THROTTLE_RT_AXI_CLK 28 +#define GCC_CAMERA_THROTTLE_XO_CLK 29 +#define GCC_CAMERA_XO_CLK 30 +#define GCC_CFG_NOC_USB3_MP_AXI_CLK 31 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 32 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 33 +#define GCC_CNOC_PCIE0_TUNNEL_CLK 34 +#define GCC_CNOC_PCIE1_TUNNEL_CLK 35 +#define GCC_CNOC_PCIE4_QX_CLK 36 +#define GCC_DDRSS_GPU_AXI_CLK 37 +#define GCC_DDRSS_PCIE_SF_TBU_CLK 38 +#define GCC_DISP1_AHB_CLK 39 +#define GCC_DISP1_HF_AXI_CLK 40 +#define GCC_DISP1_SF_AXI_CLK 41 +#define GCC_DISP1_THROTTLE_NRT_AXI_CLK 42 +#define GCC_DISP1_THROTTLE_RT_AXI_CLK 43 +#define GCC_DISP1_XO_CLK 44 +#define GCC_DISP_AHB_CLK 45 +#define GCC_DISP_HF_AXI_CLK 46 +#define GCC_DISP_SF_AXI_CLK 47 +#define GCC_DISP_THROTTLE_NRT_AXI_CLK 48 +#define GCC_DISP_THROTTLE_RT_AXI_CLK 49 +#define GCC_DISP_XO_CLK 50 +#define GCC_EMAC0_AXI_CLK 51 +#define GCC_EMAC0_PTP_CLK 52 +#define GCC_EMAC0_PTP_CLK_SRC 53 +#define GCC_EMAC0_RGMII_CLK 54 +#define GCC_EMAC0_RGMII_CLK_SRC 55 +#define GCC_EMAC0_SLV_AHB_CLK 56 +#define GCC_EMAC1_AXI_CLK 57 +#define GCC_EMAC1_PTP_CLK 58 +#define GCC_EMAC1_PTP_CLK_SRC 59 +#define GCC_EMAC1_RGMII_CLK 60 +#define GCC_EMAC1_RGMII_CLK_SRC 61 +#define GCC_EMAC1_SLV_AHB_CLK 62 +#define GCC_GP1_CLK 63 +#define GCC_GP1_CLK_SRC 64 +#define GCC_GP2_CLK 65 +#define GCC_GP2_CLK_SRC 66 +#define GCC_GP3_CLK 67 +#define GCC_GP3_CLK_SRC 68 +#define GCC_GP4_CLK 69 +#define GCC_GP4_CLK_SRC 70 +#define GCC_GP5_CLK 71 +#define GCC_GP5_CLK_SRC 72 +#define GCC_GPU_CFG_AHB_CLK 73 +#define GCC_GPU_GPLL0_CLK_SRC 74 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 75 +#define GCC_GPU_IREF_EN 76 +#define GCC_GPU_MEMNOC_GFX_CLK 77 +#define GCC_GPU_SNOC_DVM_GFX_CLK 78 +#define GCC_GPU_TCU_THROTTLE_AHB_CLK 79 +#define GCC_GPU_TCU_THROTTLE_CLK 80 +#define GCC_PCIE0_PHY_RCHNG_CLK 81 +#define GCC_PCIE1_PHY_RCHNG_CLK 82 +#define GCC_PCIE2A_PHY_RCHNG_CLK 83 +#define GCC_PCIE2B_PHY_RCHNG_CLK 84 +#define GCC_PCIE3A_PHY_RCHNG_CLK 85 +#define GCC_PCIE3B_PHY_RCHNG_CLK 86 +#define GCC_PCIE4_PHY_RCHNG_CLK 87 +#define GCC_PCIE_0_AUX_CLK 88 +#define GCC_PCIE_0_AUX_CLK_SRC 89 +#define GCC_PCIE_0_CFG_AHB_CLK 90 +#define GCC_PCIE_0_MSTR_AXI_CLK 91 +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 92 +#define GCC_PCIE_0_PIPE_CLK 93 +#define GCC_PCIE_0_SLV_AXI_CLK 94 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 95 +#define GCC_PCIE_1_AUX_CLK 96 +#define GCC_PCIE_1_AUX_CLK_SRC 97 +#define GCC_PCIE_1_CFG_AHB_CLK 98 +#define GCC_PCIE_1_MSTR_AXI_CLK 99 +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 100 +#define GCC_PCIE_1_PIPE_CLK 101 +#define GCC_PCIE_1_SLV_AXI_CLK 102 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 103 +#define GCC_PCIE_2A2B_CLKREF_CLK 104 +#define GCC_PCIE_2A_AUX_CLK 105 +#define GCC_PCIE_2A_AUX_CLK_SRC 106 +#define GCC_PCIE_2A_CFG_AHB_CLK 107 +#define GCC_PCIE_2A_MSTR_AXI_CLK 108 +#define GCC_PCIE_2A_PHY_RCHNG_CLK_SRC 109 +#define GCC_PCIE_2A_PIPE_CLK 110 +#define GCC_PCIE_2A_PIPE_CLK_SRC 111 +#define GCC_PCIE_2A_PIPE_DIV_CLK_SRC 112 +#define GCC_PCIE_2A_PIPEDIV2_CLK 113 +#define GCC_PCIE_2A_SLV_AXI_CLK 114 +#define GCC_PCIE_2A_SLV_Q2A_AXI_CLK 115 +#define GCC_PCIE_2B_AUX_CLK 116 +#define GCC_PCIE_2B_AUX_CLK_SRC 117 +#define GCC_PCIE_2B_CFG_AHB_CLK 118 +#define GCC_PCIE_2B_MSTR_AXI_CLK 119 +#define GCC_PCIE_2B_PHY_RCHNG_CLK_SRC 120 +#define GCC_PCIE_2B_PIPE_CLK 121 +#define GCC_PCIE_2B_PIPE_CLK_SRC 122 +#define GCC_PCIE_2B_PIPE_DIV_CLK_SRC 123 +#define GCC_PCIE_2B_PIPEDIV2_CLK 124 +#define GCC_PCIE_2B_SLV_AXI_CLK 125 +#define GCC_PCIE_2B_SLV_Q2A_AXI_CLK 126 +#define GCC_PCIE_3A3B_CLKREF_CLK 127 +#define GCC_PCIE_3A_AUX_CLK 128 +#define GCC_PCIE_3A_AUX_CLK_SRC 129 +#define GCC_PCIE_3A_CFG_AHB_CLK 130 +#define GCC_PCIE_3A_MSTR_AXI_CLK 131 +#define GCC_PCIE_3A_PHY_RCHNG_CLK_SRC 132 +#define GCC_PCIE_3A_PIPE_CLK 133 +#define GCC_PCIE_3A_PIPE_CLK_SRC 134 +#define GCC_PCIE_3A_PIPE_DIV_CLK_SRC 135 +#define GCC_PCIE_3A_PIPEDIV2_CLK 136 +#define GCC_PCIE_3A_SLV_AXI_CLK 137 +#define GCC_PCIE_3A_SLV_Q2A_AXI_CLK 138 +#define GCC_PCIE_3B_AUX_CLK 139 +#define GCC_PCIE_3B_AUX_CLK_SRC 140 +#define GCC_PCIE_3B_CFG_AHB_CLK 141 +#define GCC_PCIE_3B_MSTR_AXI_CLK 142 +#define GCC_PCIE_3B_PHY_RCHNG_CLK_SRC 143 +#define GCC_PCIE_3B_PIPE_CLK 144 +#define GCC_PCIE_3B_PIPE_CLK_SRC 145 +#define GCC_PCIE_3B_PIPE_DIV_CLK_SRC 146 +#define GCC_PCIE_3B_PIPEDIV2_CLK 147 +#define GCC_PCIE_3B_SLV_AXI_CLK 148 +#define GCC_PCIE_3B_SLV_Q2A_AXI_CLK 149 +#define GCC_PCIE_4_AUX_CLK 150 +#define GCC_PCIE_4_AUX_CLK_SRC 151 +#define GCC_PCIE_4_CFG_AHB_CLK 152 +#define GCC_PCIE_4_CLKREF_CLK 153 +#define GCC_PCIE_4_MSTR_AXI_CLK 154 +#define GCC_PCIE_4_PHY_RCHNG_CLK_SRC 155 +#define GCC_PCIE_4_PIPE_CLK 156 +#define GCC_PCIE_4_PIPE_CLK_SRC 157 +#define GCC_PCIE_4_PIPE_DIV_CLK_SRC 158 +#define GCC_PCIE_4_PIPEDIV2_CLK 159 +#define GCC_PCIE_4_SLV_AXI_CLK 160 +#define GCC_PCIE_4_SLV_Q2A_AXI_CLK 161 +#define GCC_PCIE_RSCC_AHB_CLK 162 +#define GCC_PCIE_RSCC_XO_CLK 163 +#define GCC_PCIE_RSCC_XO_CLK_SRC 164 +#define GCC_PCIE_THROTTLE_CFG_CLK 165 +#define GCC_PDM2_CLK 166 +#define GCC_PDM2_CLK_SRC 167 +#define GCC_PDM_AHB_CLK 168 +#define GCC_PDM_XO4_CLK 169 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 170 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 171 +#define GCC_QMIP_DISP1_AHB_CLK 172 +#define GCC_QMIP_DISP1_ROT_AHB_CLK 173 +#define GCC_QMIP_DISP_AHB_CLK 174 +#define GCC_QMIP_DISP_ROT_AHB_CLK 175 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 176 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 177 +#define GCC_QUPV3_WRAP0_CORE_2X_CLK 178 +#define GCC_QUPV3_WRAP0_CORE_CLK 179 +#define GCC_QUPV3_WRAP0_QSPI0_CLK 180 +#define GCC_QUPV3_WRAP0_S0_CLK 181 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 182 +#define GCC_QUPV3_WRAP0_S1_CLK 183 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 184 +#define GCC_QUPV3_WRAP0_S2_CLK 185 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 186 +#define GCC_QUPV3_WRAP0_S3_CLK 187 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 188 +#define GCC_QUPV3_WRAP0_S4_CLK 189 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 190 +#define GCC_QUPV3_WRAP0_S4_DIV_CLK_SRC 191 +#define GCC_QUPV3_WRAP0_S5_CLK 192 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 193 +#define GCC_QUPV3_WRAP0_S6_CLK 194 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 195 +#define GCC_QUPV3_WRAP0_S7_CLK 196 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 197 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 198 +#define GCC_QUPV3_WRAP1_CORE_CLK 199 +#define GCC_QUPV3_WRAP1_QSPI0_CLK 200 +#define GCC_QUPV3_WRAP1_S0_CLK 201 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 202 +#define GCC_QUPV3_WRAP1_S1_CLK 203 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 204 +#define GCC_QUPV3_WRAP1_S2_CLK 205 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 206 +#define GCC_QUPV3_WRAP1_S3_CLK 207 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 208 +#define GCC_QUPV3_WRAP1_S4_CLK 209 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 210 +#define GCC_QUPV3_WRAP1_S4_DIV_CLK_SRC 211 +#define GCC_QUPV3_WRAP1_S5_CLK 212 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 213 +#define GCC_QUPV3_WRAP1_S6_CLK 214 +#define GCC_QUPV3_WRAP1_S6_CLK_SRC 215 +#define GCC_QUPV3_WRAP1_S7_CLK 216 +#define GCC_QUPV3_WRAP1_S7_CLK_SRC 217 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 218 +#define GCC_QUPV3_WRAP2_CORE_CLK 219 +#define GCC_QUPV3_WRAP2_QSPI0_CLK 220 +#define GCC_QUPV3_WRAP2_S0_CLK 221 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 222 +#define GCC_QUPV3_WRAP2_S1_CLK 223 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 224 +#define GCC_QUPV3_WRAP2_S2_CLK 225 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 226 +#define GCC_QUPV3_WRAP2_S3_CLK 227 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 228 +#define GCC_QUPV3_WRAP2_S4_CLK 229 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 230 +#define GCC_QUPV3_WRAP2_S4_DIV_CLK_SRC 231 +#define GCC_QUPV3_WRAP2_S5_CLK 232 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 233 +#define GCC_QUPV3_WRAP2_S6_CLK 234 +#define GCC_QUPV3_WRAP2_S6_CLK_SRC 235 +#define GCC_QUPV3_WRAP2_S7_CLK 236 +#define GCC_QUPV3_WRAP2_S7_CLK_SRC 237 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 238 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 239 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 240 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 241 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 242 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 243 +#define GCC_SDCC2_AHB_CLK 244 +#define GCC_SDCC2_APPS_CLK 245 +#define GCC_SDCC2_APPS_CLK_SRC 246 +#define GCC_SDCC4_AHB_CLK 247 +#define GCC_SDCC4_APPS_CLK 248 +#define GCC_SDCC4_APPS_CLK_SRC 249 +#define GCC_SYS_NOC_USB_AXI_CLK 250 +#define GCC_UFS_1_CARD_CLKREF_CLK 251 +#define GCC_UFS_CARD_AHB_CLK 252 +#define GCC_UFS_CARD_AXI_CLK 253 +#define GCC_UFS_CARD_AXI_CLK_SRC 254 +#define GCC_UFS_CARD_CLKREF_CLK 255 +#define GCC_UFS_CARD_ICE_CORE_CLK 256 +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 257 +#define GCC_UFS_CARD_PHY_AUX_CLK 258 +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 259 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 260 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK_SRC 261 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 262 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK_SRC 263 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 264 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK_SRC 265 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK 266 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 267 +#define GCC_UFS_PHY_AHB_CLK 268 +#define GCC_UFS_PHY_AXI_CLK 269 +#define GCC_UFS_PHY_AXI_CLK_SRC 270 +#define GCC_UFS_PHY_ICE_CORE_CLK 271 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 272 +#define GCC_UFS_PHY_PHY_AUX_CLK 273 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 274 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 275 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 276 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 277 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 278 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 279 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 280 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 281 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 282 +#define GCC_UFS_REF_CLKREF_CLK 283 +#define GCC_USB2_HS0_CLKREF_CLK 284 +#define GCC_USB2_HS1_CLKREF_CLK 285 +#define GCC_USB2_HS2_CLKREF_CLK 286 +#define GCC_USB2_HS3_CLKREF_CLK 287 +#define GCC_USB30_MP_MASTER_CLK 288 +#define GCC_USB30_MP_MASTER_CLK_SRC 289 +#define GCC_USB30_MP_MOCK_UTMI_CLK 290 +#define GCC_USB30_MP_MOCK_UTMI_CLK_SRC 291 +#define GCC_USB30_MP_MOCK_UTMI_POSTDIV_CLK_SRC 292 +#define GCC_USB30_MP_SLEEP_CLK 293 +#define GCC_USB30_PRIM_MASTER_CLK 294 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 295 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 296 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 297 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 298 +#define GCC_USB30_PRIM_SLEEP_CLK 299 +#define GCC_USB30_SEC_MASTER_CLK 300 +#define GCC_USB30_SEC_MASTER_CLK_SRC 301 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 302 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 303 +#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC 304 +#define GCC_USB30_SEC_SLEEP_CLK 305 +#define GCC_USB34_PRIM_PHY_PIPE_CLK_SRC 306 +#define GCC_USB34_SEC_PHY_PIPE_CLK_SRC 307 +#define GCC_USB3_MP0_CLKREF_CLK 308 +#define GCC_USB3_MP1_CLKREF_CLK 309 +#define GCC_USB3_MP_PHY_AUX_CLK 310 +#define GCC_USB3_MP_PHY_AUX_CLK_SRC 311 +#define GCC_USB3_MP_PHY_COM_AUX_CLK 312 +#define GCC_USB3_MP_PHY_PIPE_0_CLK 313 +#define GCC_USB3_MP_PHY_PIPE_0_CLK_SRC 314 +#define GCC_USB3_MP_PHY_PIPE_1_CLK 315 +#define GCC_USB3_MP_PHY_PIPE_1_CLK_SRC 316 +#define GCC_USB3_PRIM_PHY_AUX_CLK 317 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 318 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 319 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 320 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 321 +#define GCC_USB3_SEC_PHY_AUX_CLK 322 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 323 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 324 +#define GCC_USB3_SEC_PHY_PIPE_CLK 325 +#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC 326 +#define GCC_USB4_1_CFG_AHB_CLK 327 +#define GCC_USB4_1_DP_CLK 328 +#define GCC_USB4_1_MASTER_CLK 329 +#define GCC_USB4_1_MASTER_CLK_SRC 330 +#define GCC_USB4_1_PHY_DP_CLK_SRC 331 +#define GCC_USB4_1_PHY_P2RR2P_PIPE_CLK 332 +#define GCC_USB4_1_PHY_P2RR2P_PIPE_CLK_SRC 333 +#define GCC_USB4_1_PHY_PCIE_PIPE_CLK 334 +#define GCC_USB4_1_PHY_PCIE_PIPE_CLK_SRC 335 +#define GCC_USB4_1_PHY_PCIE_PIPE_MUX_CLK_SRC 336 +#define GCC_USB4_1_PHY_PCIE_PIPEGMUX_CLK_SRC 337 +#define GCC_USB4_1_PHY_RX0_CLK 338 +#define GCC_USB4_1_PHY_RX0_CLK_SRC 339 +#define GCC_USB4_1_PHY_RX1_CLK 340 +#define GCC_USB4_1_PHY_RX1_CLK_SRC 341 +#define GCC_USB4_1_PHY_SYS_CLK_SRC 342 +#define GCC_USB4_1_PHY_USB_PIPE_CLK 343 +#define GCC_USB4_1_SB_IF_CLK 344 +#define GCC_USB4_1_SB_IF_CLK_SRC 345 +#define GCC_USB4_1_SYS_CLK 346 +#define GCC_USB4_1_TMU_CLK 347 +#define GCC_USB4_1_TMU_CLK_SRC 348 +#define GCC_USB4_CFG_AHB_CLK 349 +#define GCC_USB4_CLKREF_CLK 350 +#define GCC_USB4_DP_CLK 351 +#define GCC_USB4_EUD_CLKREF_CLK 352 +#define GCC_USB4_MASTER_CLK 353 +#define GCC_USB4_MASTER_CLK_SRC 354 +#define GCC_USB4_PHY_DP_CLK_SRC 355 +#define GCC_USB4_PHY_P2RR2P_PIPE_CLK 356 +#define GCC_USB4_PHY_P2RR2P_PIPE_CLK_SRC 357 +#define GCC_USB4_PHY_PCIE_PIPE_CLK 358 +#define GCC_USB4_PHY_PCIE_PIPE_CLK_SRC 359 +#define GCC_USB4_PHY_PCIE_PIPE_MUX_CLK_SRC 360 +#define GCC_USB4_PHY_PCIE_PIPEGMUX_CLK_SRC 361 +#define GCC_USB4_PHY_RX0_CLK 362 +#define GCC_USB4_PHY_RX0_CLK_SRC 363 +#define GCC_USB4_PHY_RX1_CLK 364 +#define GCC_USB4_PHY_RX1_CLK_SRC 365 +#define GCC_USB4_PHY_SYS_CLK_SRC 366 +#define GCC_USB4_PHY_USB_PIPE_CLK 367 +#define GCC_USB4_SB_IF_CLK 368 +#define GCC_USB4_SB_IF_CLK_SRC 369 +#define GCC_USB4_SYS_CLK 370 +#define GCC_USB4_TMU_CLK 371 +#define GCC_USB4_TMU_CLK_SRC 372 +#define GCC_VIDEO_AHB_CLK 373 +#define GCC_VIDEO_AXI0_CLK 374 +#define GCC_VIDEO_AXI1_CLK 375 +#define GCC_VIDEO_CVP_THROTTLE_CLK 376 +#define GCC_VIDEO_VCODEC_THROTTLE_CLK 377 +#define GCC_VIDEO_XO_CLK 378 +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK 379 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 380 +#define GCC_UFS_CARD_AXI_HW_CTL_CLK 381 +#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK 382 +#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK 383 +#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK 384 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 385 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 386 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 387 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 388 + +/* GCC resets */ +#define GCC_EMAC0_BCR 0 +#define GCC_EMAC1_BCR 1 +#define GCC_PCIE_0_LINK_DOWN_BCR 2 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 3 +#define GCC_PCIE_0_PHY_BCR 4 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 5 +#define GCC_PCIE_0_TUNNEL_BCR 6 +#define GCC_PCIE_1_LINK_DOWN_BCR 7 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 8 +#define GCC_PCIE_1_PHY_BCR 9 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 10 +#define GCC_PCIE_1_TUNNEL_BCR 11 +#define GCC_PCIE_2A_BCR 12 +#define GCC_PCIE_2A_LINK_DOWN_BCR 13 +#define GCC_PCIE_2A_NOCSR_COM_PHY_BCR 14 +#define GCC_PCIE_2A_PHY_BCR 15 +#define GCC_PCIE_2A_PHY_NOCSR_COM_PHY_BCR 16 +#define GCC_PCIE_2B_BCR 17 +#define GCC_PCIE_2B_LINK_DOWN_BCR 18 +#define GCC_PCIE_2B_NOCSR_COM_PHY_BCR 19 +#define GCC_PCIE_2B_PHY_BCR 20 +#define GCC_PCIE_2B_PHY_NOCSR_COM_PHY_BCR 21 +#define GCC_PCIE_3A_BCR 22 +#define GCC_PCIE_3A_LINK_DOWN_BCR 23 +#define GCC_PCIE_3A_NOCSR_COM_PHY_BCR 24 +#define GCC_PCIE_3A_PHY_BCR 25 +#define GCC_PCIE_3A_PHY_NOCSR_COM_PHY_BCR 26 +#define GCC_PCIE_3B_BCR 27 +#define GCC_PCIE_3B_LINK_DOWN_BCR 28 +#define GCC_PCIE_3B_NOCSR_COM_PHY_BCR 29 +#define GCC_PCIE_3B_PHY_BCR 30 +#define GCC_PCIE_3B_PHY_NOCSR_COM_PHY_BCR 31 +#define GCC_PCIE_4_BCR 32 +#define GCC_PCIE_4_LINK_DOWN_BCR 33 +#define GCC_PCIE_4_NOCSR_COM_PHY_BCR 34 +#define GCC_PCIE_4_PHY_BCR 35 +#define GCC_PCIE_4_PHY_NOCSR_COM_PHY_BCR 36 +#define GCC_PCIE_PHY_CFG_AHB_BCR 37 +#define GCC_PCIE_PHY_COM_BCR 38 +#define GCC_PCIE_RSCC_BCR 39 +#define GCC_QUSB2PHY_HS0_MP_BCR 40 +#define GCC_QUSB2PHY_HS1_MP_BCR 41 +#define GCC_QUSB2PHY_HS2_MP_BCR 42 +#define GCC_QUSB2PHY_HS3_MP_BCR 43 +#define GCC_QUSB2PHY_PRIM_BCR 44 +#define GCC_QUSB2PHY_SEC_BCR 45 +#define GCC_SDCC2_BCR 46 +#define GCC_SDCC4_BCR 47 +#define GCC_UFS_CARD_BCR 48 +#define GCC_UFS_PHY_BCR 49 +#define GCC_USB2_PHY_PRIM_BCR 50 +#define GCC_USB2_PHY_SEC_BCR 51 +#define GCC_USB30_MP_BCR 52 +#define GCC_USB30_PRIM_BCR 53 +#define GCC_USB30_SEC_BCR 54 +#define GCC_USB3_DP_PHY_PRIM_BCR 55 +#define GCC_USB3_DP_PHY_SEC_BCR 56 +#define GCC_USB3_PHY_PRIM_BCR 57 +#define GCC_USB3_PHY_SEC_BCR 58 +#define GCC_USB3_UNIPHY_MP0_BCR 59 +#define GCC_USB3_UNIPHY_MP1_BCR 60 +#define GCC_USB3PHY_PHY_PRIM_BCR 61 +#define GCC_USB3PHY_PHY_SEC_BCR 62 +#define GCC_USB3UNIPHY_PHY_MP0_BCR 63 +#define GCC_USB3UNIPHY_PHY_MP1_BCR 64 +#define GCC_USB4_1_BCR 65 +#define GCC_USB4_1_DP_PHY_PRIM_BCR 66 +#define GCC_USB4_1_DPPHY_AUX_BCR 67 +#define GCC_USB4_1_PHY_PRIM_BCR 68 +#define GCC_USB4_BCR 69 +#define GCC_USB4_DP_PHY_PRIM_BCR 70 +#define GCC_USB4_DPPHY_AUX_BCR 71 +#define GCC_USB4_PHY_PRIM_BCR 72 +#define GCC_USB4PHY_1_PHY_PRIM_BCR 73 +#define GCC_USB4PHY_PHY_PRIM_BCR 74 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 75 +#define GCC_VIDEO_BCR 76 +#define GCC_VIDEO_AXI0_CLK_ARES 77 +#define GCC_VIDEO_AXI1_CLK_ARES 78 + +/* GCC GDSCs */ +#define PCIE_0_TUNNEL_GDSC 0 +#define PCIE_1_TUNNEL_GDSC 1 +#define PCIE_2A_GDSC 2 +#define PCIE_2B_GDSC 3 +#define PCIE_3A_GDSC 4 +#define PCIE_3B_GDSC 5 +#define PCIE_4_GDSC 6 +#define UFS_CARD_GDSC 7 +#define UFS_PHY_GDSC 8 +#define USB30_MP_GDSC 9 +#define USB30_PRIM_GDSC 10 +#define USB30_SEC_GDSC 11 + +#endif
Add binding for the Qualcomm SC8280XP Global Clock controller. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v1: - None .../bindings/clock/qcom,gcc-sc8280xp.yaml | 199 +++++++ include/dt-bindings/clock/qcom,gcc-sc8280xp.h | 496 ++++++++++++++++++ 2 files changed, 695 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml create mode 100644 include/dt-bindings/clock/qcom,gcc-sc8280xp.h