| Message ID | 20220420122728.510802-1-alistair@alistair23.me (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: imx_v6_v7_defconfig: Enable RDNIS by default | expand |
On Wed, Apr 20, 2022 at 10:27:28PM +1000, Alistair Francis wrote: > Supporting Ethernet over USB is very useful for debugging. This allows > debugging systems where the other networking (WiFi or Ethernet) doesn't come > up, while still allowing SSH access. > > This is extreamly useful on the reMarkable 2 as it doesn't have UART RX > or a physical ethernet port. If WiFi doesn't work this is the next best > method to access the device. This should be probably left to users to configure per their needs. And configfs might be the best default option. Shawn > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig > index f7498df08dfe..f9ddaba1aad2 100644 > --- a/arch/arm/configs/imx_v6_v7_defconfig > +++ b/arch/arm/configs/imx_v6_v7_defconfig > @@ -349,12 +349,16 @@ CONFIG_USB_CONFIGFS_F_UVC=y > CONFIG_USB_CONFIGFS_F_PRINTER=y > CONFIG_USB_ZERO=m > CONFIG_USB_AUDIO=m > -CONFIG_USB_ETH=m > +CONFIG_USB_ETH=y > CONFIG_USB_G_NCM=m > -CONFIG_USB_GADGETFS=m > -CONFIG_USB_FUNCTIONFS=m > +CONFIG_USB_GADGETFS=y > +CONFIG_USB_FUNCTIONFS=y > +CONFIG_USB_FUNCTIONFS_ETH=y > +CONFIG_USB_FUNCTIONFS_RNDIS=y > +CONFIG_USB_FUNCTIONFS_GENERIC=y > CONFIG_USB_MASS_STORAGE=m > CONFIG_USB_G_SERIAL=m > +CONFIG_USB_CDC_COMPOSITE=y > CONFIG_MMC=y > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_PLTFM=y > -- > 2.35.1 >
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f7498df08dfe..f9ddaba1aad2 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -349,12 +349,16 @@ CONFIG_USB_CONFIGFS_F_UVC=y CONFIG_USB_CONFIGFS_F_PRINTER=y CONFIG_USB_ZERO=m CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m +CONFIG_USB_ETH=y CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m +CONFIG_USB_GADGETFS=y +CONFIG_USB_FUNCTIONFS=y +CONFIG_USB_FUNCTIONFS_ETH=y +CONFIG_USB_FUNCTIONFS_RNDIS=y +CONFIG_USB_FUNCTIONFS_GENERIC=y CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m +CONFIG_USB_CDC_COMPOSITE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y
Supporting Ethernet over USB is very useful for debugging. This allows debugging systems where the other networking (WiFi or Ethernet) doesn't come up, while still allowing SSH access. This is extreamly useful on the reMarkable 2 as it doesn't have UART RX or a physical ethernet port. If WiFi doesn't work this is the next best method to access the device. Signed-off-by: Alistair Francis <alistair@alistair23.me> --- arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)