Message ID | 20220505001628.681226-1-tianfei.zhang@intel.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [v4] uio: dfl: add HSSI subsystem feature id | expand |
On Wed, May 04, 2022 at 08:16:28PM -0400, Tianfei Zhang wrote: > From: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > Add the Device Feature List (DFL) feature id for the > High Speed Serial Interface (HSSI) Subsystem to the > table of ids supported by the uio_dfl driver. > > The HSSI Subsystem is a configurable set of IP blocks > to be used as part of a Ethernet or PCS/FEC/PMA pipeline. > Like the Ethernet group used by the N3000 card, the HSSI > Subsystem does not fully implement a network device from > a Linux netdev perspective and is controlled and monitored > from user space software via the uio interface. > > The Feature ID table of DFL can be found: > https://github.com/OPAE/dfl-feature-id > > Reviewed-by: Tom Rix <trix@redhat.com> > Acked-by: Xu Yilun <yilun.xu@intel.com> > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> Please re-order the tags. The earliest at the top and the latest at the bottom. "SoB chains should reflect the **real** route a patch took as it was propagated to the maintainers and ultimately to Linus, with the first SoB entry signalling primary authorship of a single author." For more details, please refer to Documentation/process/submitting-patches.rst For you case, I assume: Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Xu Yilun <yilun.xu@intel.com> is it? Thanks, Yilun > --- > v4: add Reviewed-by and Acked-by tag and add Feature ID table url in git message. > v3: change the name of this feature id to HSSI_SUBSYS and rewrite > the git message. > v2: add HSSI introduction and the git repo of Feature ID table. > --- > drivers/uio/uio_dfl.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c > index 89c0fc7b0cbc..8f39cc8bb034 100644 > --- a/drivers/uio/uio_dfl.c > +++ b/drivers/uio/uio_dfl.c > @@ -45,9 +45,11 @@ static int uio_dfl_probe(struct dfl_device *ddev) > } > > #define FME_FEATURE_ID_ETH_GROUP 0x10 > +#define FME_FEATURE_ID_HSSI_SUBSYS 0x15 > > static const struct dfl_device_id uio_dfl_ids[] = { > { FME_ID, FME_FEATURE_ID_ETH_GROUP }, > + { FME_ID, FME_FEATURE_ID_HSSI_SUBSYS }, > { } > }; > MODULE_DEVICE_TABLE(dfl, uio_dfl_ids); > -- > 2.26.2
> -----Original Message----- > From: Zhang, Tianfei <tianfei.zhang@intel.com> > Sent: Thursday, May 5, 2022 8:16 AM > To: Wu, Hao <hao.wu@intel.com>; trix@redhat.com; mdf@kernel.org; Xu, Yilun > <yilun.xu@intel.com>; linux-fpga@vger.kernel.org; > gregkh@linuxfoundation.org > Cc: linux-kernel@vger.kernel.org; Matthew Gerlach > <matthew.gerlach@linux.intel.com>; Zhang, Tianfei <tianfei.zhang@intel.com> > Subject: [PATCH v4] uio: dfl: add HSSI subsystem feature id > > From: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > Add the Device Feature List (DFL) feature id for the > High Speed Serial Interface (HSSI) Subsystem to the > table of ids supported by the uio_dfl driver. > > The HSSI Subsystem is a configurable set of IP blocks > to be used as part of a Ethernet or PCS/FEC/PMA pipeline. > Like the Ethernet group used by the N3000 card, the HSSI > Subsystem does not fully implement a network device from > a Linux netdev perspective and is controlled and monitored > from user space software via the uio interface. > > The Feature ID table of DFL can be found: > https://github.com/OPAE/dfl-feature-id Is it possible to have multiple different HSSI implementations? Will they share the same feature id or not? If yes, why uses a generic name here? Is it possible someday this feature id is marked as legacy not used and introduce a new one as the same name? > > Reviewed-by: Tom Rix <trix@redhat.com> > Acked-by: Xu Yilun <yilun.xu@intel.com> > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> > --- > v4: add Reviewed-by and Acked-by tag and add Feature ID table url in git > message. > v3: change the name of this feature id to HSSI_SUBSYS and rewrite > the git message. > v2: add HSSI introduction and the git repo of Feature ID table. > --- > drivers/uio/uio_dfl.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c > index 89c0fc7b0cbc..8f39cc8bb034 100644 > --- a/drivers/uio/uio_dfl.c > +++ b/drivers/uio/uio_dfl.c > @@ -45,9 +45,11 @@ static int uio_dfl_probe(struct dfl_device *ddev) > } > > #define FME_FEATURE_ID_ETH_GROUP 0x10 > +#define FME_FEATURE_ID_HSSI_SUBSYS 0x15 > > static const struct dfl_device_id uio_dfl_ids[] = { > { FME_ID, FME_FEATURE_ID_ETH_GROUP }, > + { FME_ID, FME_FEATURE_ID_HSSI_SUBSYS }, > { } > }; > MODULE_DEVICE_TABLE(dfl, uio_dfl_ids); > -- > 2.26.2
> -----Original Message----- > From: Xu, Yilun <yilun.xu@intel.com> > Sent: Thursday, May 5, 2022 10:16 AM > To: Zhang, Tianfei <tianfei.zhang@intel.com> > Cc: Wu, Hao <hao.wu@intel.com>; trix@redhat.com; mdf@kernel.org; linux- > fpga@vger.kernel.org; gregkh@linuxfoundation.org; linux- > kernel@vger.kernel.org; Matthew Gerlach <matthew.gerlach@linux.intel.com> > Subject: Re: [PATCH v4] uio: dfl: add HSSI subsystem feature id > > On Wed, May 04, 2022 at 08:16:28PM -0400, Tianfei Zhang wrote: > > From: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > > > Add the Device Feature List (DFL) feature id for the High Speed Serial > > Interface (HSSI) Subsystem to the table of ids supported by the > > uio_dfl driver. > > > > The HSSI Subsystem is a configurable set of IP blocks to be used as > > part of a Ethernet or PCS/FEC/PMA pipeline. > > Like the Ethernet group used by the N3000 card, the HSSI Subsystem > > does not fully implement a network device from a Linux netdev > > perspective and is controlled and monitored from user space software > > via the uio interface. > > > > The Feature ID table of DFL can be found: > > https://github.com/OPAE/dfl-feature-id > > > > Reviewed-by: Tom Rix <trix@redhat.com> > > Acked-by: Xu Yilun <yilun.xu@intel.com> > > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> > > Please re-order the tags. The earliest at the top and the latest at the bottom. > > "SoB chains should reflect the **real** route a patch took as it was propagated > to the maintainers and ultimately to Linus, with the first SoB entry signalling > primary authorship of a single author." > > For more details, please refer to Documentation/process/submitting-patches.rst > > > For you case, I assume: > > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> > Reviewed-by: Tom Rix <trix@redhat.com> > Acked-by: Xu Yilun <yilun.xu@intel.com> > > is it? Yes, I agree, I will send a new one. > > Thanks, > Yilun > > > > --- > > v4: add Reviewed-by and Acked-by tag and add Feature ID table url in git > message. > > v3: change the name of this feature id to HSSI_SUBSYS and rewrite > > the git message. > > v2: add HSSI introduction and the git repo of Feature ID table. > > --- > > drivers/uio/uio_dfl.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c index > > 89c0fc7b0cbc..8f39cc8bb034 100644 > > --- a/drivers/uio/uio_dfl.c > > +++ b/drivers/uio/uio_dfl.c > > @@ -45,9 +45,11 @@ static int uio_dfl_probe(struct dfl_device *ddev) > > } > > > > #define FME_FEATURE_ID_ETH_GROUP 0x10 > > +#define FME_FEATURE_ID_HSSI_SUBSYS 0x15 > > > > static const struct dfl_device_id uio_dfl_ids[] = { > > { FME_ID, FME_FEATURE_ID_ETH_GROUP }, > > + { FME_ID, FME_FEATURE_ID_HSSI_SUBSYS }, > > { } > > }; > > MODULE_DEVICE_TABLE(dfl, uio_dfl_ids); > > -- > > 2.26.2
> -----Original Message----- > From: Wu, Hao <hao.wu@intel.com> > Sent: Thursday, May 5, 2022 2:35 PM > To: Zhang, Tianfei <tianfei.zhang@intel.com>; trix@redhat.com; > mdf@kernel.org; Xu, Yilun <yilun.xu@intel.com>; linux-fpga@vger.kernel.org; > gregkh@linuxfoundation.org > Cc: linux-kernel@vger.kernel.org; Matthew Gerlach > <matthew.gerlach@linux.intel.com> > Subject: RE: [PATCH v4] uio: dfl: add HSSI subsystem feature id > > > -----Original Message----- > > From: Zhang, Tianfei <tianfei.zhang@intel.com> > > Sent: Thursday, May 5, 2022 8:16 AM > > To: Wu, Hao <hao.wu@intel.com>; trix@redhat.com; mdf@kernel.org; Xu, > > Yilun <yilun.xu@intel.com>; linux-fpga@vger.kernel.org; > > gregkh@linuxfoundation.org > > Cc: linux-kernel@vger.kernel.org; Matthew Gerlach > > <matthew.gerlach@linux.intel.com>; Zhang, Tianfei > > <tianfei.zhang@intel.com> > > Subject: [PATCH v4] uio: dfl: add HSSI subsystem feature id > > > > From: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > > > Add the Device Feature List (DFL) feature id for the High Speed Serial > > Interface (HSSI) Subsystem to the table of ids supported by the > > uio_dfl driver. > > > > The HSSI Subsystem is a configurable set of IP blocks to be used as > > part of a Ethernet or PCS/FEC/PMA pipeline. > > Like the Ethernet group used by the N3000 card, the HSSI Subsystem > > does not fully implement a network device from a Linux netdev > > perspective and is controlled and monitored from user space software > > via the uio interface. > > > > The Feature ID table of DFL can be found: > > https://github.com/OPAE/dfl-feature-id > > Is it possible to have multiple different HSSI implementations? > Will they share the same feature id or not? If yes, why uses a generic name > here? The HSSI subsystem is a new design, there will use for a long time. > > Is it possible someday this feature id is marked as legacy not used and introduce > a new one as the same name? No, this HSSI subsystem is a standard device which was designed for OFS. It will extensively use for Intel FPGA PAC card in the feature. > > > > > Reviewed-by: Tom Rix <trix@redhat.com> > > Acked-by: Xu Yilun <yilun.xu@intel.com> > > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> > > --- > > v4: add Reviewed-by and Acked-by tag and add Feature ID table url in > > git message. > > v3: change the name of this feature id to HSSI_SUBSYS and rewrite > > the git message. > > v2: add HSSI introduction and the git repo of Feature ID table. > > --- > > drivers/uio/uio_dfl.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c index > > 89c0fc7b0cbc..8f39cc8bb034 100644 > > --- a/drivers/uio/uio_dfl.c > > +++ b/drivers/uio/uio_dfl.c > > @@ -45,9 +45,11 @@ static int uio_dfl_probe(struct dfl_device *ddev) > > } > > > > #define FME_FEATURE_ID_ETH_GROUP 0x10 > > +#define FME_FEATURE_ID_HSSI_SUBSYS 0x15 > > > > static const struct dfl_device_id uio_dfl_ids[] = { > > { FME_ID, FME_FEATURE_ID_ETH_GROUP }, > > + { FME_ID, FME_FEATURE_ID_HSSI_SUBSYS }, > > { } > > }; > > MODULE_DEVICE_TABLE(dfl, uio_dfl_ids); > > -- > > 2.26.2
diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c index 89c0fc7b0cbc..8f39cc8bb034 100644 --- a/drivers/uio/uio_dfl.c +++ b/drivers/uio/uio_dfl.c @@ -45,9 +45,11 @@ static int uio_dfl_probe(struct dfl_device *ddev) } #define FME_FEATURE_ID_ETH_GROUP 0x10 +#define FME_FEATURE_ID_HSSI_SUBSYS 0x15 static const struct dfl_device_id uio_dfl_ids[] = { { FME_ID, FME_FEATURE_ID_ETH_GROUP }, + { FME_ID, FME_FEATURE_ID_HSSI_SUBSYS }, { } }; MODULE_DEVICE_TABLE(dfl, uio_dfl_ids);