diff mbox series

[net-next,v3,06/12] net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver

Message ID 20220504093000.132579-7-clement.leger@bootlin.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series add support for Renesas RZ/N1 ethernet subsystem devices | expand

Commit Message

Clément Léger May 4, 2022, 9:29 a.m. UTC
Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5
ports including 1 CPU management port. A MDIO bus is also exposed by
this switch and allows to communicate with PHYs connected to the ports.
Each switch port (except for the CPU management ports) is connected to
the MII converter.

This driver includes basic bridging support, more support will be added
later (vlan, etc).

Suggested-by: Jean-Pierre Geslin <jean-pierre.geslin@non.se.com>
Suggested-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/net/dsa/Kconfig      |   9 +
 drivers/net/dsa/Makefile     |   1 +
 drivers/net/dsa/rzn1_a5psw.c | 712 +++++++++++++++++++++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h | 199 ++++++++++
 4 files changed, 921 insertions(+)
 create mode 100644 drivers/net/dsa/rzn1_a5psw.c
 create mode 100644 drivers/net/dsa/rzn1_a5psw.h

Comments

Vladimir Oltean May 4, 2022, 4:14 p.m. UTC | #1
On Wed, May 04, 2022 at 11:29:54AM +0200, Clément Léger wrote:
> Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5
> ports including 1 CPU management port. A MDIO bus is also exposed by
> this switch and allows to communicate with PHYs connected to the ports.
> Each switch port (except for the CPU management ports) is connected to
> the MII converter.
> 
> This driver includes basic bridging support, more support will be added
> later (vlan, etc).
> 
> Suggested-by: Jean-Pierre Geslin <jean-pierre.geslin@non.se.com>
> Suggested-by: Phil Edworthy <phil.edworthy@renesas.com>
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---
> +static void a5psw_port_disable(struct dsa_switch *ds, int port)
> +{
> +	struct a5psw *a5psw = ds->priv;
> +
> +	a5psw_port_authorize_set(a5psw, port, false);
> +	a5psw_port_enable_set(a5psw, port, false);
> +	a5psw_port_fdb_flush(a5psw, port);

The bridge core takes care of this by setting the port state to
DISABLED, which makes DSA call dsa_port_fast_age(), no?

Standalone ports shouldn't need fast ageing because they shouldn't have
address learning enabled in the first place.

> +}

> +static int a5psw_port_bridge_join(struct dsa_switch *ds, int port,
> +				  struct dsa_bridge bridge,
> +				  bool *tx_fwd_offload,
> +				  struct netlink_ext_ack *extack)
> +{
> +	struct a5psw *a5psw = ds->priv;
> +
> +	/* We only support 1 bridge device */
> +	if (a5psw->br_dev && bridge.dev != a5psw->br_dev)
> +		return -EINVAL;

return -EOPNOTSUPP, to allow software bridging.
You might also want to set an extack message here and avoid overwriting
it in dsa_slave_changeupper() with "Offloading not supported", but say
something more specific like "Forwarding offload supported for a single
bridge".

> +
> +	a5psw->br_dev = bridge.dev;
> +	a5psw_flooding_set_resolution(a5psw, port, true);
> +	a5psw_port_mgmtfwd_set(a5psw, port, false);
> +
> +	return 0;
> +}
> +
> +static void a5psw_port_bridge_leave(struct dsa_switch *ds, int port,
> +				    struct dsa_bridge bridge)
> +{
> +	struct a5psw *a5psw = ds->priv;
> +
> +	a5psw_flooding_set_resolution(a5psw, port, false);
> +	a5psw_port_mgmtfwd_set(a5psw, port, true);
> +
> +	/* No more port bridged */

s/port/ports/

> +	if (a5psw->bridged_ports == BIT(A5PSW_CPU_PORT))
> +		a5psw->br_dev = NULL;
> +}

> +static int a5psw_pcs_get(struct a5psw *a5psw)
> +{
> +	struct device_node *ports, *port, *pcs_node;
> +	struct phylink_pcs *pcs;
> +	int ret;
> +	u32 reg;
> +
> +	ports = of_get_child_by_name(a5psw->dev->of_node, "ports");

Can you please do:

	ports = of_get_child_by_name(a5psw->dev->of_node, "ethernet-ports");
	if (!ports)
		ports = of_get_child_by_name(a5psw->dev->of_node, "ports");

> +	if (!ports)
> +		return -EINVAL;
> +
> +	for_each_available_child_of_node(ports, port) {
> +		pcs_node = of_parse_phandle(port, "pcs-handle", 0);
> +		if (!pcs_node)
> +			continue;
> +
> +		if (of_property_read_u32(port, "reg", &reg)) {
> +			ret = -EINVAL;
> +			goto free_pcs;
> +		}
> +
> +		if (reg >= ARRAY_SIZE(a5psw->pcs)) {
> +			ret = -ENODEV;
> +			goto free_pcs;
> +		}
> +
> +		pcs = miic_create(pcs_node);
> +		if (IS_ERR(pcs)) {
> +			dev_err(a5psw->dev, "Failed to create PCS for port %d\n",
> +				reg);
> +			ret = PTR_ERR(pcs);
> +			goto free_pcs;
> +		}
> +
> +		a5psw->pcs[reg] = pcs;
> +	}
> +	of_node_put(ports);
> +
> +	return 0;
> +
> +free_pcs:
> +	a5psw_pcs_free(a5psw);
> +
> +	return ret;
> +}

> +/* Ensure enough space for 2 VLAN tags */
> +#define A5PSW_EXTRA_MTU_LEN		(A5PSW_TAG_LEN + 8)
> +#define A5PSW_MAX_MTU			(A5PSW_JUMBO_LEN - A5PSW_EXTRA_MTU_LEN)
> +#define A5PSW_MGMT_TAG_VALUE		0xE001
> +
> +#define A5PSW_PATTERN_MGMTFWD		0
> +
> +#define A5PSW_LK_BUSY_USEC_POLL		10
> +#define A5PSW_CTRL_TIMEOUT		1000
> +#define A5PSW_TABLE_ENTRIES		8192
> +
> +/**
> + * struct a5psw - switch struct
> + * @base: Base address of the switch
> + * @hclk: hclk_switch clock
> + * @clk: clk_switch clock
> + * @dev: Device associated to the switch
> + * @mii_bus: MDIO bus struct
> + * @mdio_freq: MDIO bus frequency requested
> + * @pcs: Array of PCS connected to the switch ports (not for the CPU)
> + * @ds: DSA switch struct
> + * @lk_lock: Lock for the lookup table
> + * @reg_lock: Lock for register read-modify-write operation
> + * @bridged_ports: List of ports that are bridged and should be flooded

s/List/Mask/

> + * @br_dev: Bridge net device
> + */
> +struct a5psw {
> +	void __iomem *base;
> +	struct clk *hclk;
> +	struct clk *clk;
> +	struct device *dev;
> +	struct mii_bus	*mii_bus;
> +	struct phylink_pcs *pcs[A5PSW_PORTS_NUM - 1];
> +	struct dsa_switch ds;
> +	spinlock_t lk_lock;
> +	spinlock_t reg_lock;
> +	u32 bridged_ports;
> +	struct net_device *br_dev;
> +};
> -- 
> 2.34.1
>
Clément Léger May 5, 2022, 12:59 p.m. UTC | #2
Le Wed, 4 May 2022 19:14:14 +0300,
Vladimir Oltean <olteanv@gmail.com> a écrit :

> On Wed, May 04, 2022 at 11:29:54AM +0200, Clément Léger wrote:
> > Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5
> > ports including 1 CPU management port. A MDIO bus is also exposed by
> > this switch and allows to communicate with PHYs connected to the ports.
> > Each switch port (except for the CPU management ports) is connected to
> > the MII converter.
> > 
> > This driver includes basic bridging support, more support will be added
> > later (vlan, etc).
> > 
> > Suggested-by: Jean-Pierre Geslin <jean-pierre.geslin@non.se.com>
> > Suggested-by: Phil Edworthy <phil.edworthy@renesas.com>
> > Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> > ---
> > +static void a5psw_port_disable(struct dsa_switch *ds, int port)
> > +{
> > +	struct a5psw *a5psw = ds->priv;
> > +
> > +	a5psw_port_authorize_set(a5psw, port, false);
> > +	a5psw_port_enable_set(a5psw, port, false);
> > +	a5psw_port_fdb_flush(a5psw, port);  
> 
> The bridge core takes care of this by setting the port state to
> DISABLED, which makes DSA call dsa_port_fast_age(), no?

Yes you are right.

> 
> Standalone ports shouldn't need fast ageing because they shouldn't have
> address learning enabled in the first place.

Ok, makes sense.

> 
> > +}  
> 
> > +static int a5psw_port_bridge_join(struct dsa_switch *ds, int port,
> > +				  struct dsa_bridge bridge,
> > +				  bool *tx_fwd_offload,
> > +				  struct netlink_ext_ack *extack)
> > +{
> > +	struct a5psw *a5psw = ds->priv;
> > +
> > +	/* We only support 1 bridge device */
> > +	if (a5psw->br_dev && bridge.dev != a5psw->br_dev)
> > +		return -EINVAL;  
> 
> return -EOPNOTSUPP, to allow software bridging.

Ok.

> You might also want to set an extack message here and avoid overwriting
> it in dsa_slave_changeupper() with "Offloading not supported", but say
> something more specific like "Forwarding offload supported for a single
> bridge".
> 
> > +		a5psw->br_dev = NULL;
> > +}  
> 
> > +static int a5psw_pcs_get(struct a5psw *a5psw)
> > +{
> > +	struct device_node *ports, *port, *pcs_node;
> > +	struct phylink_pcs *pcs;
> > +	int ret;
> > +	u32 reg;
> > +
> > +	ports = of_get_child_by_name(a5psw->dev->of_node, "ports");  
> 
> Can you please do:
> 
> 	ports = of_get_child_by_name(a5psw->dev->of_node, "ethernet-ports");
> 	if (!ports)
> 		ports = of_get_child_by_name(a5psw->dev->of_node, "ports");

Acked.
diff mbox series

Patch

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 37a3dabdce31..0896c5fd9dec 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -70,6 +70,15 @@  config NET_DSA_QCA8K
 
 source "drivers/net/dsa/realtek/Kconfig"
 
+config NET_DSA_RZN1_A5PSW
+	tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
+	depends on NET_DSA
+	select NET_DSA_TAG_RZN1_A5PSW
+	select PCS_RZN1_MIIC
+	help
+	  This driver supports the A5PSW switch, which is embedded in Renesas
+	  RZ/N1 SoC.
+
 config NET_DSA_SMSC_LAN9303
 	tristate
 	depends on VLAN_8021Q || VLAN_8021Q=n
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index e73838c12256..b32907afa702 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -9,6 +9,7 @@  obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
+obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
new file mode 100644
index 000000000000..b413e9ad7050
--- /dev/null
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -0,0 +1,712 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <net/dsa.h>
+
+#include "rzn1_a5psw.h"
+
+static void a5psw_reg_writel(struct a5psw *a5psw, int offset, u32 value)
+{
+	writel(value, a5psw->base + offset);
+}
+
+static u32 a5psw_reg_readl(struct a5psw *a5psw, int offset)
+{
+	return readl(a5psw->base + offset);
+}
+
+static void a5psw_reg_rmw(struct a5psw *a5psw, int offset, u32 mask, u32 val)
+{
+	u32 reg;
+
+	spin_lock(&a5psw->reg_lock);
+
+	reg = a5psw_reg_readl(a5psw, offset);
+	reg &= ~mask;
+	reg |= val;
+	a5psw_reg_writel(a5psw, offset, reg);
+
+	spin_unlock(&a5psw->reg_lock);
+}
+
+static enum dsa_tag_protocol a5psw_get_tag_protocol(struct dsa_switch *ds,
+						    int port,
+						    enum dsa_tag_protocol mp)
+{
+	return DSA_TAG_PROTO_RZN1_A5PSW;
+}
+
+static void a5psw_port_pattern_set(struct a5psw *a5psw, int port, int pattern,
+				   bool enable)
+{
+	u32 rx_match = 0;
+
+	if (enable)
+		rx_match |= A5PSW_RXMATCH_CONFIG_PATTERN(pattern);
+
+	a5psw_reg_rmw(a5psw, A5PSW_RXMATCH_CONFIG(port),
+		      A5PSW_RXMATCH_CONFIG_PATTERN(pattern), rx_match);
+}
+
+static void a5psw_port_mgmtfwd_set(struct a5psw *a5psw, int port, bool enable)
+{
+	/* Enable "management forward" pattern matching, this will forward
+	 * packets from this port only towards the management port and thus
+	 * isolate the port.
+	 */
+	a5psw_port_pattern_set(a5psw, port, A5PSW_PATTERN_MGMTFWD, enable);
+}
+
+static void a5psw_port_enable_set(struct a5psw *a5psw, int port, bool enable)
+{
+	u32 port_ena = 0;
+
+	if (enable)
+		port_ena |= A5PSW_PORT_ENA_TX_RX(port);
+
+	a5psw_reg_rmw(a5psw, A5PSW_PORT_ENA, A5PSW_PORT_ENA_TX_RX(port),
+		      port_ena);
+}
+
+static int a5psw_lk_execute_ctrl(struct a5psw *a5psw, u32 *ctrl)
+{
+	int ret;
+
+	a5psw_reg_writel(a5psw, A5PSW_LK_ADDR_CTRL, *ctrl);
+
+	ret = readl_poll_timeout(a5psw->base + A5PSW_LK_ADDR_CTRL, *ctrl,
+				 !(*ctrl & A5PSW_LK_ADDR_CTRL_BUSY),
+				 A5PSW_LK_BUSY_USEC_POLL, A5PSW_CTRL_TIMEOUT);
+	if (ret)
+		dev_err(a5psw->dev, "LK_CTRL timeout waiting for BUSY bit\n");
+
+	return ret;
+}
+
+static void a5psw_port_fdb_flush(struct a5psw *a5psw, int port)
+{
+	u32 ctrl = A5PSW_LK_ADDR_CTRL_DELETE_PORT | BIT(port);
+
+	spin_lock(&a5psw->lk_lock);
+	a5psw_lk_execute_ctrl(a5psw, &ctrl);
+	spin_unlock(&a5psw->lk_lock);
+}
+
+static void a5psw_port_authorize_set(struct a5psw *a5psw, int port,
+				     bool authorize)
+{
+	u32 reg = a5psw_reg_readl(a5psw, A5PSW_AUTH_PORT(port));
+
+	if (authorize)
+		reg |= A5PSW_AUTH_PORT_AUTHORIZED;
+	else
+		reg &= ~A5PSW_AUTH_PORT_AUTHORIZED;
+
+	a5psw_reg_writel(a5psw, A5PSW_AUTH_PORT(port), reg);
+}
+
+static void a5psw_port_disable(struct dsa_switch *ds, int port)
+{
+	struct a5psw *a5psw = ds->priv;
+
+	a5psw_port_authorize_set(a5psw, port, false);
+	a5psw_port_enable_set(a5psw, port, false);
+	a5psw_port_fdb_flush(a5psw, port);
+}
+
+static int a5psw_port_enable(struct dsa_switch *ds, int port,
+			     struct phy_device *phy)
+{
+	struct a5psw *a5psw = ds->priv;
+
+	a5psw_port_authorize_set(a5psw, port, true);
+	a5psw_port_enable_set(a5psw, port, true);
+
+	return 0;
+}
+
+static int a5psw_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+	struct a5psw *a5psw = ds->priv;
+
+	new_mtu += ETH_HLEN + A5PSW_EXTRA_MTU_LEN + ETH_FCS_LEN;
+	a5psw_reg_writel(a5psw, A5PSW_FRM_LENGTH(port), new_mtu);
+
+	return 0;
+}
+
+static int a5psw_port_max_mtu(struct dsa_switch *ds, int port)
+{
+	return A5PSW_MAX_MTU;
+}
+
+static void a5psw_phylink_get_caps(struct dsa_switch *ds, int port,
+				   struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_1000FD;
+
+	if (dsa_is_cpu_port(ds, port)) {
+		/* GMII is used internally and GMAC2 is connected to the switch
+		 * using 1000Mbps Full-Duplex mode only (cf ethernet manual)
+		 */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+	} else {
+		config->mac_capabilities |= MAC_100 | MAC_10;
+		__set_bit(PHY_INTERFACE_MODE_RGMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
+	}
+}
+
+static struct phylink_pcs *
+a5psw_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+			     phy_interface_t interface)
+{
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	struct a5psw *a5psw = ds->priv;
+
+	if (!dsa_port_is_cpu(dp) && a5psw->pcs[port])
+		return a5psw->pcs[port];
+
+	return NULL;
+}
+
+static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
+					unsigned int mode,
+					phy_interface_t interface)
+{
+	struct a5psw *a5psw = ds->priv;
+	u32 cmd_cfg;
+
+	cmd_cfg = a5psw_reg_readl(a5psw, A5PSW_CMD_CFG(port));
+	cmd_cfg &= ~(A5PSW_CMD_CFG_RX_ENA | A5PSW_CMD_CFG_TX_ENA);
+	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
+}
+
+static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
+				      unsigned int mode,
+				      phy_interface_t interface,
+				      struct phy_device *phydev, int speed,
+				      int duplex, bool tx_pause, bool rx_pause)
+{
+	u32 cmd_cfg = A5PSW_CMD_CFG_RX_ENA | A5PSW_CMD_CFG_TX_ENA |
+		      A5PSW_CMD_CFG_TX_CRC_APPEND;
+	struct a5psw *a5psw = ds->priv;
+
+	if (speed == SPEED_1000)
+		cmd_cfg |= A5PSW_CMD_CFG_ETH_SPEED;
+
+	if (duplex == DUPLEX_HALF)
+		cmd_cfg |= A5PSW_CMD_CFG_HD_ENA;
+
+	cmd_cfg |= A5PSW_CMD_CFG_CNTL_FRM_ENA;
+
+	if (!rx_pause)
+		cmd_cfg &= ~A5PSW_CMD_CFG_PAUSE_IGNORE;
+
+	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
+}
+
+static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+	struct a5psw *a5psw = ds->priv;
+	unsigned long rate;
+	u64 max, tmp;
+	u32 agetime;
+
+	rate = clk_get_rate(a5psw->clk);
+	max = div64_ul(((u64)A5PSW_LK_AGETIME_MASK * A5PSW_TABLE_ENTRIES * 1024),
+		       rate) * 1000;
+	if (msecs > max)
+		return -EINVAL;
+
+	tmp = div_u64(rate, MSEC_PER_SEC);
+	agetime = div_u64(msecs * tmp, 1024 * A5PSW_TABLE_ENTRIES);
+
+	a5psw_reg_writel(a5psw, A5PSW_LK_AGETIME, agetime);
+
+	return 0;
+}
+
+static void a5psw_flooding_set_resolution(struct a5psw *a5psw, int port,
+					  bool set)
+{
+	u8 offsets[] = {A5PSW_UCAST_DEF_MASK, A5PSW_BCAST_DEF_MASK,
+			A5PSW_MCAST_DEF_MASK};
+	int i;
+
+	if (set)
+		a5psw->bridged_ports |= BIT(port);
+	else
+		a5psw->bridged_ports &= ~BIT(port);
+
+	for (i = 0; i < ARRAY_SIZE(offsets); i++)
+		a5psw_reg_writel(a5psw, offsets[i], a5psw->bridged_ports);
+}
+
+static int a5psw_port_bridge_join(struct dsa_switch *ds, int port,
+				  struct dsa_bridge bridge,
+				  bool *tx_fwd_offload,
+				  struct netlink_ext_ack *extack)
+{
+	struct a5psw *a5psw = ds->priv;
+
+	/* We only support 1 bridge device */
+	if (a5psw->br_dev && bridge.dev != a5psw->br_dev)
+		return -EINVAL;
+
+	a5psw->br_dev = bridge.dev;
+	a5psw_flooding_set_resolution(a5psw, port, true);
+	a5psw_port_mgmtfwd_set(a5psw, port, false);
+
+	return 0;
+}
+
+static void a5psw_port_bridge_leave(struct dsa_switch *ds, int port,
+				    struct dsa_bridge bridge)
+{
+	struct a5psw *a5psw = ds->priv;
+
+	a5psw_flooding_set_resolution(a5psw, port, false);
+	a5psw_port_mgmtfwd_set(a5psw, port, true);
+
+	/* No more port bridged */
+	if (a5psw->bridged_ports == BIT(A5PSW_CPU_PORT))
+		a5psw->br_dev = NULL;
+}
+
+static void a5psw_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+	u32 mask = A5PSW_INPUT_LEARN_DIS(port) | A5PSW_INPUT_LEARN_BLOCK(port);
+	struct a5psw *a5psw = ds->priv;
+	u32 reg = 0;
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+	case BR_STATE_BLOCKING:
+		reg |= A5PSW_INPUT_LEARN_DIS(port);
+		reg |= A5PSW_INPUT_LEARN_BLOCK(port);
+		break;
+	case BR_STATE_LISTENING:
+		reg |= A5PSW_INPUT_LEARN_DIS(port);
+		break;
+	case BR_STATE_LEARNING:
+		reg |= A5PSW_INPUT_LEARN_BLOCK(port);
+		break;
+	case BR_STATE_FORWARDING:
+	default:
+		break;
+	}
+
+	a5psw_reg_rmw(a5psw, A5PSW_INPUT_LEARN, mask, reg);
+}
+
+static void a5psw_port_fast_age(struct dsa_switch *ds, int port)
+{
+	struct a5psw *a5psw = ds->priv;
+
+	a5psw_port_fdb_flush(a5psw, port);
+}
+
+static int a5psw_setup(struct dsa_switch *ds)
+{
+	struct a5psw *a5psw = ds->priv;
+	int port, vlan, ret;
+	struct dsa_port *dp;
+	u32 reg;
+
+	/* Validate that there is only 1 CPU port with index A5PSW_CPU_PORT */
+	dsa_switch_for_each_cpu_port(dp, ds) {
+		if (dp->index != A5PSW_CPU_PORT) {
+			dev_err(a5psw->dev, "Invalid CPU port\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Configure management port */
+	reg = A5PSW_CPU_PORT | A5PSW_MGMT_CFG_DISCARD;
+	a5psw_reg_writel(a5psw, A5PSW_MGMT_CFG, reg);
+
+	/* Set pattern 0 to forward all frame to mgmt port */
+	a5psw_reg_writel(a5psw, A5PSW_PATTERN_CTRL(A5PSW_PATTERN_MGMTFWD),
+			 A5PSW_PATTERN_CTRL_MGMTFWD);
+
+	/* Enable port tagging */
+	reg = FIELD_PREP(A5PSW_MGMT_TAG_CFG_TAGFIELD, A5PSW_MGMT_TAG_VALUE);
+	reg |= A5PSW_MGMT_TAG_CFG_ENABLE | A5PSW_MGMT_TAG_CFG_ALL_FRAMES;
+	a5psw_reg_writel(a5psw, A5PSW_MGMT_TAG_CFG, reg);
+
+	/* Enable normal switch operation */
+	reg = A5PSW_LK_ADDR_CTRL_BLOCKING | A5PSW_LK_ADDR_CTRL_LEARNING |
+	      A5PSW_LK_ADDR_CTRL_AGEING | A5PSW_LK_ADDR_CTRL_ALLOW_MIGR |
+	      A5PSW_LK_ADDR_CTRL_CLEAR_TABLE;
+	a5psw_reg_writel(a5psw, A5PSW_LK_CTRL, reg);
+
+	ret = readl_poll_timeout(a5psw->base + A5PSW_LK_CTRL, reg,
+				 !(reg & A5PSW_LK_ADDR_CTRL_CLEAR_TABLE),
+				 A5PSW_LK_BUSY_USEC_POLL, A5PSW_CTRL_TIMEOUT);
+	if (ret) {
+		dev_err(a5psw->dev, "Failed to clear lookup table\n");
+		return ret;
+	}
+
+	/* Reset learn count to 0 */
+	reg = A5PSW_LK_LEARNCOUNT_MODE_SET;
+	a5psw_reg_writel(a5psw, A5PSW_LK_LEARNCOUNT, reg);
+
+	/* Clear VLAN resource table */
+	reg = A5PSW_VLAN_RES_WR_PORTMASK | A5PSW_VLAN_RES_WR_TAGMASK;
+	for (vlan = 0; vlan < A5PSW_VLAN_COUNT; vlan++)
+		a5psw_reg_writel(a5psw, A5PSW_VLAN_RES(vlan), reg);
+
+	/* Reset all ports */
+	dsa_switch_for_each_port(dp, ds) {
+		port = dp->index;
+
+		/* Reset the port */
+		a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port),
+				 A5PSW_CMD_CFG_SW_RESET);
+
+		/* Enable only CPU port */
+		a5psw_port_enable_set(a5psw, port, dsa_port_is_cpu(dp));
+
+		if (dsa_port_is_unused(dp))
+			continue;
+
+		/* Enable egress flooding for CPU port */
+		if (dsa_port_is_cpu(dp))
+			a5psw_flooding_set_resolution(a5psw, port, true);
+
+		/* Enable management forward only for user ports */
+		if (dsa_port_is_user(dp))
+			a5psw_port_mgmtfwd_set(a5psw, port, true);
+	}
+
+	return 0;
+}
+
+static const struct dsa_switch_ops a5psw_switch_ops = {
+	.get_tag_protocol = a5psw_get_tag_protocol,
+	.setup = a5psw_setup,
+	.port_disable = a5psw_port_disable,
+	.port_enable = a5psw_port_enable,
+	.phylink_get_caps = a5psw_phylink_get_caps,
+	.phylink_mac_select_pcs = a5psw_phylink_mac_select_pcs,
+	.phylink_mac_link_down = a5psw_phylink_mac_link_down,
+	.phylink_mac_link_up = a5psw_phylink_mac_link_up,
+	.port_change_mtu = a5psw_port_change_mtu,
+	.port_max_mtu = a5psw_port_max_mtu,
+	.set_ageing_time = a5psw_set_ageing_time,
+	.port_bridge_join = a5psw_port_bridge_join,
+	.port_bridge_leave = a5psw_port_bridge_leave,
+	.port_stp_state_set = a5psw_port_stp_state_set,
+	.port_fast_age = a5psw_port_fast_age,
+};
+
+static int a5psw_mdio_wait_busy(struct a5psw *a5psw)
+{
+	u32 status;
+	int err;
+
+	err = readl_poll_timeout(a5psw->base + A5PSW_MDIO_CFG_STATUS, status,
+				 !(status & A5PSW_MDIO_CFG_STATUS_BUSY), 10,
+				 1000 * USEC_PER_MSEC);
+	if (err)
+		dev_err(a5psw->dev, "MDIO command timeout\n");
+
+	return err;
+}
+
+static int a5psw_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
+{
+	struct a5psw *a5psw = bus->priv;
+	u32 cmd, status;
+	int ret;
+
+	if (phy_reg & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	cmd = A5PSW_MDIO_COMMAND_READ;
+	cmd |= FIELD_PREP(A5PSW_MDIO_COMMAND_REG_ADDR, phy_reg);
+	cmd |= FIELD_PREP(A5PSW_MDIO_COMMAND_PHY_ADDR, phy_id);
+
+	a5psw_reg_writel(a5psw, A5PSW_MDIO_COMMAND, cmd);
+
+	ret = a5psw_mdio_wait_busy(a5psw);
+	if (ret)
+		return ret;
+
+	ret = a5psw_reg_readl(a5psw, A5PSW_MDIO_DATA) & A5PSW_MDIO_DATA_MASK;
+
+	status = a5psw_reg_readl(a5psw, A5PSW_MDIO_CFG_STATUS);
+	if (status & A5PSW_MDIO_CFG_STATUS_READERR)
+		return -EIO;
+
+	return ret;
+}
+
+static int a5psw_mdio_write(struct mii_bus *bus, int phy_id, int phy_reg,
+			    u16 phy_data)
+{
+	struct a5psw *a5psw = bus->priv;
+	u32 cmd;
+
+	if (phy_reg & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	cmd = FIELD_PREP(A5PSW_MDIO_COMMAND_REG_ADDR, phy_reg);
+	cmd |= FIELD_PREP(A5PSW_MDIO_COMMAND_PHY_ADDR, phy_id);
+
+	a5psw_reg_writel(a5psw, A5PSW_MDIO_COMMAND, cmd);
+	a5psw_reg_writel(a5psw, A5PSW_MDIO_DATA, phy_data);
+
+	return a5psw_mdio_wait_busy(a5psw);
+}
+
+static int a5psw_mdio_config(struct a5psw *a5psw, u32 mdio_freq)
+{
+	unsigned long rate;
+	unsigned long div;
+	u32 cfgstatus;
+
+	rate = clk_get_rate(a5psw->hclk);
+	div = ((rate / mdio_freq) / 2);
+	if (div > FIELD_MAX(A5PSW_MDIO_CFG_STATUS_CLKDIV) ||
+	    div < A5PSW_MDIO_CLK_DIV_MIN) {
+		dev_err(a5psw->dev, "MDIO clock div %ld out of range\n", div);
+		return -ERANGE;
+	}
+
+	cfgstatus = FIELD_PREP(A5PSW_MDIO_CFG_STATUS_CLKDIV, div);
+
+	a5psw_reg_writel(a5psw, A5PSW_MDIO_CFG_STATUS, cfgstatus);
+
+	return 0;
+}
+
+static int a5psw_probe_mdio(struct a5psw *a5psw, struct device_node *node)
+{
+	struct device *dev = a5psw->dev;
+	struct mii_bus *bus;
+	u32 mdio_freq;
+	int ret;
+
+	if (of_property_read_u32(node, "clock-frequency", &mdio_freq))
+		mdio_freq = A5PSW_MDIO_DEF_FREQ;
+
+	ret = a5psw_mdio_config(a5psw, mdio_freq);
+	if (ret)
+		return ret;
+
+	bus = devm_mdiobus_alloc(dev);
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "a5psw_mdio";
+	bus->read = a5psw_mdio_read;
+	bus->write = a5psw_mdio_write;
+	bus->priv = a5psw;
+	bus->parent = dev;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+
+	a5psw->mii_bus = bus;
+
+	return devm_of_mdiobus_register(dev, bus, node);
+}
+
+static void a5psw_pcs_free(struct a5psw *a5psw)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(a5psw->pcs); i++) {
+		if (a5psw->pcs[i])
+			miic_destroy(a5psw->pcs[i]);
+	}
+}
+
+static int a5psw_pcs_get(struct a5psw *a5psw)
+{
+	struct device_node *ports, *port, *pcs_node;
+	struct phylink_pcs *pcs;
+	int ret;
+	u32 reg;
+
+	ports = of_get_child_by_name(a5psw->dev->of_node, "ports");
+	if (!ports)
+		return -EINVAL;
+
+	for_each_available_child_of_node(ports, port) {
+		pcs_node = of_parse_phandle(port, "pcs-handle", 0);
+		if (!pcs_node)
+			continue;
+
+		if (of_property_read_u32(port, "reg", &reg)) {
+			ret = -EINVAL;
+			goto free_pcs;
+		}
+
+		if (reg >= ARRAY_SIZE(a5psw->pcs)) {
+			ret = -ENODEV;
+			goto free_pcs;
+		}
+
+		pcs = miic_create(pcs_node);
+		if (IS_ERR(pcs)) {
+			dev_err(a5psw->dev, "Failed to create PCS for port %d\n",
+				reg);
+			ret = PTR_ERR(pcs);
+			goto free_pcs;
+		}
+
+		a5psw->pcs[reg] = pcs;
+	}
+	of_node_put(ports);
+
+	return 0;
+
+free_pcs:
+	a5psw_pcs_free(a5psw);
+
+	return ret;
+}
+
+static int a5psw_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *mdio;
+	struct dsa_switch *ds;
+	struct a5psw *a5psw;
+	int ret;
+
+	a5psw = devm_kzalloc(dev, sizeof(*a5psw), GFP_KERNEL);
+	if (!a5psw)
+		return -ENOMEM;
+
+	a5psw->dev = dev;
+	spin_lock_init(&a5psw->lk_lock);
+	spin_lock_init(&a5psw->reg_lock);
+	a5psw->base = devm_platform_ioremap_resource(pdev, 0);
+	if (!a5psw->base)
+		return -EINVAL;
+
+	ret = a5psw_pcs_get(a5psw);
+	if (ret)
+		return ret;
+
+	a5psw->hclk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(a5psw->hclk)) {
+		dev_err(dev, "failed get hclk clock\n");
+		ret = PTR_ERR(a5psw->hclk);
+		goto free_pcs;
+	}
+
+	a5psw->clk = devm_clk_get(dev, "clk");
+	if (IS_ERR(a5psw->clk)) {
+		dev_err(dev, "failed get clk_switch clock\n");
+		ret = PTR_ERR(a5psw->clk);
+		goto free_pcs;
+	}
+
+	ret = clk_prepare_enable(a5psw->clk);
+	if (ret)
+		goto free_pcs;
+
+	ret = clk_prepare_enable(a5psw->hclk);
+	if (ret)
+		goto clk_disable;
+
+	mdio = of_get_child_by_name(dev->of_node, "mdio");
+	if (of_device_is_available(mdio)) {
+		ret = a5psw_probe_mdio(a5psw, mdio);
+		if (ret) {
+			of_node_put(mdio);
+			dev_err(&pdev->dev, "Failed to register MDIO: %d\n",
+				ret);
+			goto hclk_disable;
+		}
+	} else {
+		of_node_put(mdio);
+	}
+
+	ds = &a5psw->ds;
+	ds->dev = &pdev->dev;
+	ds->num_ports = A5PSW_PORTS_NUM;
+	ds->ops = &a5psw_switch_ops;
+	ds->priv = a5psw;
+
+	ret = dsa_register_switch(ds);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register DSA switch: %d\n", ret);
+		goto hclk_disable;
+	}
+
+	return 0;
+
+hclk_disable:
+	clk_disable_unprepare(a5psw->hclk);
+clk_disable:
+	clk_disable_unprepare(a5psw->clk);
+free_pcs:
+	a5psw_pcs_free(a5psw);
+
+	return ret;
+}
+
+static int a5psw_remove(struct platform_device *pdev)
+{
+	struct a5psw *a5psw = platform_get_drvdata(pdev);
+
+	dsa_unregister_switch(&a5psw->ds);
+	a5psw_pcs_free(a5psw);
+	clk_disable_unprepare(a5psw->hclk);
+	clk_disable_unprepare(a5psw->clk);
+
+	return 0;
+}
+
+static void a5psw_shutdown(struct platform_device *pdev)
+{
+	struct a5psw *a5psw = platform_get_drvdata(pdev);
+
+	if (!a5psw)
+		return;
+
+	dsa_switch_shutdown(&a5psw->ds);
+
+	platform_set_drvdata(pdev, NULL);
+}
+
+static const struct of_device_id a5psw_of_mtable[] = {
+	{ .compatible = "renesas,rzn1-a5psw", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, a5psw_of_mtable);
+
+static struct platform_driver a5psw_driver = {
+	.driver = {
+		.name	 = "rzn1_a5psw",
+		.of_match_table = of_match_ptr(a5psw_of_mtable),
+	},
+	.probe = a5psw_probe,
+	.remove = a5psw_remove,
+	.shutdown = a5psw_shutdown,
+};
+module_platform_driver(a5psw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Renesas RZ/N1 Advanced 5-port Switch driver");
+MODULE_AUTHOR("Clément Léger <clement.leger@bootlin.com>");
diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
new file mode 100644
index 000000000000..fd3cff2cf1de
--- /dev/null
+++ b/drivers/net/dsa/rzn1_a5psw.h
@@ -0,0 +1,199 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 Schneider Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_device.h>
+#include <linux/pcs-rzn1-miic.h>
+#include <net/dsa.h>
+
+#define A5PSW_REVISION			0x0
+#define A5PSW_PORT_OFFSET(port)		(0x400 * (port))
+
+#define A5PSW_PORT_ENA			0x8
+#define A5PSW_PORT_ENA_RX_SHIFT		16
+#define A5PSW_PORT_ENA_TX_RX(port)	(BIT((port) + A5PSW_PORT_ENA_RX_SHIFT) | \
+					 BIT(port))
+#define A5PSW_UCAST_DEF_MASK		0xC
+
+#define A5PSW_VLAN_VERIFY		0x10
+#define A5PSW_VLAN_VERI_SHIFT		0
+#define A5PSW_VLAN_DISC_SHIFT		16
+
+#define A5PSW_BCAST_DEF_MASK		0x14
+#define A5PSW_MCAST_DEF_MASK		0x18
+
+#define A5PSW_INPUT_LEARN		0x1C
+#define A5PSW_INPUT_LEARN_DIS(p)	BIT((p) + 16)
+#define A5PSW_INPUT_LEARN_BLOCK(p)	BIT(p)
+
+#define A5PSW_MGMT_CFG			0x20
+#define A5PSW_MGMT_CFG_DISCARD		BIT(7)
+
+#define A5PSW_MODE_CFG			0x24
+#define A5PSW_MODE_STATS_RESET		BIT(31)
+
+#define A5PSW_VLAN_IN_MODE		0x28
+#define A5PSW_VLAN_IN_MODE_PORT_SHIFT(port)	((port) * 2)
+#define A5PSW_VLAN_IN_MODE_PORT(port)		(GENMASK(1, 0) << \
+					A5PSW_VLAN_IN_MODE_PORT_SHIFT(port))
+#define A5PSW_VLAN_IN_MODE_SINGLE_PASSTHROUGH	0x0
+#define A5PSW_VLAN_IN_MODE_SINGLE_REPLACE	0x1
+#define A5PSW_VLAN_IN_MODE_TAG_ALWAYS		0x2
+
+#define A5PSW_VLAN_OUT_MODE		0x2C
+#define A5PSW_VLAN_OUT_MODE_PORT(port)	(GENMASK(1, 0) << ((port) * 2))
+#define A5PSW_VLAN_OUT_MODE_DIS		0x0
+#define A5PSW_VLAN_OUT_MODE_STRIP	0x1
+#define A5PSW_VLAN_OUT_MODE_TAG_THROUGH	0x2
+#define A5PSW_VLAN_OUT_MODE_TRANSPARENT	0x3
+
+#define A5PSW_VLAN_IN_MODE_ENA		0x30
+#define A5PSW_VLAN_TAG_ID		0x34
+
+#define A5PSW_SYSTEM_TAGINFO(port)	(0x200 + A5PSW_PORT_OFFSET(port))
+
+#define A5PSW_AUTH_PORT(port)		(0x240 + 4 * (port))
+#define A5PSW_AUTH_PORT_AUTHORIZED	BIT(0)
+
+#define A5PSW_VLAN_RES(entry)		(0x280 + 4 * (entry))
+#define A5PSW_VLAN_RES_WR_PORTMASK	BIT(30)
+#define A5PSW_VLAN_RES_WR_TAGMASK	BIT(29)
+#define A5PSW_VLAN_RES_RD_TAGMASK	BIT(28)
+#define A5PSW_VLAN_RES_ID		GENMASK(16, 5)
+#define A5PSW_VLAN_RES_PORTMASK		GENMASK(4, 0)
+
+#define A5PSW_RXMATCH_CONFIG(port)	(0x3e80 + 4 * (port))
+#define A5PSW_RXMATCH_CONFIG_PATTERN(p)	BIT(p)
+
+#define A5PSW_PATTERN_CTRL(p)		(0x3eb0 + 4  * (p))
+#define A5PSW_PATTERN_CTRL_MGMTFWD	BIT(1)
+
+#define A5PSW_LK_CTRL		0x400
+#define A5PSW_LK_ADDR_CTRL_BLOCKING	BIT(0)
+#define A5PSW_LK_ADDR_CTRL_LEARNING	BIT(1)
+#define A5PSW_LK_ADDR_CTRL_AGEING	BIT(2)
+#define A5PSW_LK_ADDR_CTRL_ALLOW_MIGR	BIT(3)
+#define A5PSW_LK_ADDR_CTRL_CLEAR_TABLE	BIT(6)
+
+#define A5PSW_LK_ADDR_CTRL		0x408
+#define A5PSW_LK_ADDR_CTRL_BUSY		BIT(31)
+#define A5PSW_LK_ADDR_CTRL_DELETE_PORT	BIT(30)
+#define A5PSW_LK_ADDR_CTRL_CLEAR	BIT(29)
+#define A5PSW_LK_ADDR_CTRL_LOOKUP	BIT(28)
+#define A5PSW_LK_ADDR_CTRL_WAIT		BIT(27)
+#define A5PSW_LK_ADDR_CTRL_READ		BIT(26)
+#define A5PSW_LK_ADDR_CTRL_WRITE	BIT(25)
+#define A5PSW_LK_ADDR_CTRL_ADDRESS	GENMASK(12, 0)
+
+#define A5PSW_LK_DATA_LO		0x40C
+#define A5PSW_LK_DATA_HI		0x410
+#define A5PSW_LK_DATA_HI_VALID		BIT(16)
+#define A5PSW_LK_DATA_HI_PORT		BIT(16)
+
+#define A5PSW_LK_LEARNCOUNT		0x418
+#define A5PSW_LK_LEARNCOUNT_COUNT	GENMASK(13, 0)
+#define A5PSW_LK_LEARNCOUNT_MODE	GENMASK(31, 30)
+#define A5PSW_LK_LEARNCOUNT_MODE_SET	0x0
+#define A5PSW_LK_LEARNCOUNT_MODE_INC	0x1
+#define A5PSW_LK_LEARNCOUNT_MODE_DEC	0x2
+
+#define A5PSW_MGMT_TAG_CFG		0x480
+#define A5PSW_MGMT_TAG_CFG_TAGFIELD	GENMASK(31, 16)
+#define A5PSW_MGMT_TAG_CFG_ALL_FRAMES	BIT(1)
+#define A5PSW_MGMT_TAG_CFG_ENABLE	BIT(0)
+
+#define A5PSW_LK_AGETIME		0x41C
+#define A5PSW_LK_AGETIME_MASK		GENMASK(23, 0)
+
+#define A5PSW_MDIO_CFG_STATUS		0x700
+#define A5PSW_MDIO_CFG_STATUS_CLKDIV	GENMASK(15, 7)
+#define A5PSW_MDIO_CFG_STATUS_READERR	BIT(1)
+#define A5PSW_MDIO_CFG_STATUS_BUSY	BIT(0)
+
+#define A5PSW_MDIO_COMMAND		0x704
+/* Register is named TRAININIT in datasheet and should be set when reading */
+#define A5PSW_MDIO_COMMAND_READ		BIT(15)
+#define A5PSW_MDIO_COMMAND_PHY_ADDR	GENMASK(9, 5)
+#define A5PSW_MDIO_COMMAND_REG_ADDR	GENMASK(4, 0)
+
+#define A5PSW_MDIO_DATA			0x708
+#define A5PSW_MDIO_DATA_MASK		GENMASK(15, 0)
+
+#define A5PSW_CMD_CFG(port)		(0x808 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_CMD_CFG_CNTL_FRM_ENA	BIT(23)
+#define A5PSW_CMD_CFG_SW_RESET		BIT(13)
+#define A5PSW_CMD_CFG_TX_CRC_APPEND	BIT(11)
+#define A5PSW_CMD_CFG_HD_ENA		BIT(10)
+#define A5PSW_CMD_CFG_PAUSE_IGNORE	BIT(8)
+#define A5PSW_CMD_CFG_CRC_FWD		BIT(6)
+#define A5PSW_CMD_CFG_ETH_SPEED		BIT(3)
+#define A5PSW_CMD_CFG_RX_ENA		BIT(1)
+#define A5PSW_CMD_CFG_TX_ENA		BIT(0)
+
+#define A5PSW_FRM_LENGTH(port)		(0x814 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_FRM_LENGTH_MASK		GENMASK(13, 0)
+
+#define A5PSW_STATUS(port)		(0x840 + A5PSW_PORT_OFFSET(port))
+
+#define A5PSW_STATS_HIWORD		0x900
+
+#define A5PSW_DUMMY_WORKAROUND		0x5000
+
+#define A5PSW_VLAN_TAG(prio, id)	(((prio) << 12) | (id))
+#define A5PSW_PORTS_NUM			5
+#define A5PSW_CPU_PORT			(A5PSW_PORTS_NUM - 1)
+#define A5PSW_MDIO_DEF_FREQ		2500000
+#define A5PSW_MDIO_TIMEOUT		100
+#define A5PSW_JUMBO_LEN			(10 * SZ_1K)
+#define A5PSW_MDIO_CLK_DIV_MIN		5
+#define A5PSW_TAG_LEN			8
+#define A5PSW_VLAN_COUNT		32
+
+/* Ensure enough space for 2 VLAN tags */
+#define A5PSW_EXTRA_MTU_LEN		(A5PSW_TAG_LEN + 8)
+#define A5PSW_MAX_MTU			(A5PSW_JUMBO_LEN - A5PSW_EXTRA_MTU_LEN)
+#define A5PSW_MGMT_TAG_VALUE		0xE001
+
+#define A5PSW_PATTERN_MGMTFWD		0
+
+#define A5PSW_LK_BUSY_USEC_POLL		10
+#define A5PSW_CTRL_TIMEOUT		1000
+#define A5PSW_TABLE_ENTRIES		8192
+
+/**
+ * struct a5psw - switch struct
+ * @base: Base address of the switch
+ * @hclk: hclk_switch clock
+ * @clk: clk_switch clock
+ * @dev: Device associated to the switch
+ * @mii_bus: MDIO bus struct
+ * @mdio_freq: MDIO bus frequency requested
+ * @pcs: Array of PCS connected to the switch ports (not for the CPU)
+ * @ds: DSA switch struct
+ * @lk_lock: Lock for the lookup table
+ * @reg_lock: Lock for register read-modify-write operation
+ * @bridged_ports: List of ports that are bridged and should be flooded
+ * @br_dev: Bridge net device
+ */
+struct a5psw {
+	void __iomem *base;
+	struct clk *hclk;
+	struct clk *clk;
+	struct device *dev;
+	struct mii_bus	*mii_bus;
+	struct phylink_pcs *pcs[A5PSW_PORTS_NUM - 1];
+	struct dsa_switch ds;
+	spinlock_t lk_lock;
+	spinlock_t reg_lock;
+	u32 bridged_ports;
+	struct net_device *br_dev;
+};