| Message ID | 20220427163525.1129887-1-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v8,1/1] usb: cdns3: allocate TX FIFO size according to composite EP number | expand |
On Wed, Apr 27, 2022 at 11:35:25AM -0500, Frank Li wrote: > Some devices have USB compositions which may require multiple endpoints. > To get better performance, need bigger CDNS3_EP_BUF_SIZE. > > But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when > multiple endpoints. > > By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. > > Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size > Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into > ecnds3_device:ep_iso_burst > > Using a simple algorithm to calculate ep_buf_size. > ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + > 1). > > Test at 8qxp: > > Gadget ep_buf_size > > RNDIS: 5 > RNDIS+ACM: 3 > Mass Storage + NCM + ACM 2 > > Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because > exceed FIFO memory. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > Change from v1 to v2: > Add safe check for mult, buffering and maxburst that's nice, but this is v8, not v2? confused, greg k-h
On Wed, Apr 27, 2022 at 11:57 AM Greg KH <gregkh@linuxfoundation.org> wrote: > > On Wed, Apr 27, 2022 at 11:35:25AM -0500, Frank Li wrote: > > Some devices have USB compositions which may require multiple endpoints. > > To get better performance, need bigger CDNS3_EP_BUF_SIZE. > > > > But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when > > multiple endpoints. > > > > By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. > > > > Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size > > Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into > > ecnds3_device:ep_iso_burst > > > > Using a simple algorithm to calculate ep_buf_size. > > ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + > > 1). > > > > Test at 8qxp: > > > > Gadget ep_buf_size > > > > RNDIS: 5 > > RNDIS+ACM: 3 > > Mass Storage + NCM + ACM 2 > > > > Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because > > exceed FIFO memory. > > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > --- > > Change from v1 to v2: > > Add safe check for mult, buffering and maxburst > > that's nice, but this is v8, not v2? Sorry, It should be v2. I made a mistake with the title. > > confused, > > greg k-h
On 22-04-27 11:35:25, Frank Li wrote: > Some devices have USB compositions which may require multiple endpoints. > To get better performance, need bigger CDNS3_EP_BUF_SIZE. > > But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when > multiple endpoints. > > By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. > > Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size > Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into > ecnds3_device:ep_iso_burst typo, and would you please explain usage for ep_iso_burst in your patch? > > Using a simple algorithm to calculate ep_buf_size. > ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + > 1). > > Test at 8qxp: > > Gadget ep_buf_size > > RNDIS: 5 > RNDIS+ACM: 3 > Mass Storage + NCM + ACM 2 > > Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because > exceed FIFO memory. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > Change from v1 to v2: > Add safe check for mult, buffering and maxburst > > drivers/usb/cdns3/cdns3-gadget.c | 50 +++++++++++++++++++++++++++++--- > drivers/usb/cdns3/cdns3-gadget.h | 9 ++++-- > 2 files changed, 52 insertions(+), 7 deletions(-) > > diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c > index 1f3b4a1422126..e25e7a2b55862 100644 > --- a/drivers/usb/cdns3/cdns3-gadget.c > +++ b/drivers/usb/cdns3/cdns3-gadget.c > @@ -2050,7 +2050,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > u8 mult = 0; > int ret; > > - buffering = CDNS3_EP_BUF_SIZE - 1; > + buffering = priv_dev->ep_buf_size - 1; > > cdns3_configure_dmult(priv_dev, priv_ep); > > @@ -2069,7 +2069,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > break; > default: > ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); > - mult = CDNS3_EP_ISO_HS_MULT - 1; > + mult = priv_dev->ep_iso_burst - 1; > buffering = mult + 1; > } > > @@ -2085,14 +2085,14 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > mult = 0; > max_packet_size = 1024; > if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { > - maxburst = CDNS3_EP_ISO_SS_BURST - 1; > + maxburst = priv_dev->ep_iso_burst - 1; > buffering = (mult + 1) * > (maxburst + 1); > > if (priv_ep->interval > 1) > buffering++; > } else { > - maxburst = CDNS3_EP_BUF_SIZE - 1; > + maxburst = priv_dev->ep_buf_size - 1; > } > break; > default: > @@ -2136,6 +2136,10 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > ep_cfg |= EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK; > } > > + mult = min_t(u8, mult, EP_CFG_MULT_MAX); > + buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX); > + maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX); > + > ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | > EP_CFG_MULT(mult) | > EP_CFG_BUFFERING(buffering) | > @@ -2970,6 +2974,43 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) > return 0; > } > > +/** > + * cdns3_gadget_check_config - ensure cdns3 can support the USB configuration > + * @gadget: pointer to the USB gadget > + * > + * Used to record the maximum number of endpoints being used in a USB composite > + * device. (across all configurations) This is to be used in the calculation > + * of the TXFIFO sizes when resizing internal memory for individual endpoints. > + * It will help ensured that the resizing logic reserves enough space for at > + * least one max packet. > + */ > +static int cdns3_gadget_check_config(struct usb_gadget *gadget) > +{ > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); > + struct usb_ep *ep; > + int n_in = 0; > + int total; > + > + list_for_each_entry(ep, &gadget->ep_list, ep_list) { > + if (ep->claimed && (ep->address & USB_DIR_IN)) > + n_in++; > + } > + > + priv_dev->ep_buf_size = 1; > + priv_dev->ep_iso_burst = 1; You will re-calculate above variables below, why need to initialize them? Peter > + > + /* 2KB are reserved for EP0, 1KB for out*/ > + total = 2 + n_in + 1; > + > + if (total > priv_dev->onchip_buffers) > + return -ENOMEM; > + > + priv_dev->ep_buf_size = priv_dev->ep_iso_burst = > + (priv_dev->onchip_buffers - 2) / (n_in + 1); > + > + return 0; > +} > + > static const struct usb_gadget_ops cdns3_gadget_ops = { > .get_frame = cdns3_gadget_get_frame, > .wakeup = cdns3_gadget_wakeup, > @@ -2978,6 +3019,7 @@ static const struct usb_gadget_ops cdns3_gadget_ops = { > .udc_start = cdns3_gadget_udc_start, > .udc_stop = cdns3_gadget_udc_stop, > .match_ep = cdns3_gadget_match_ep, > + .check_config = cdns3_gadget_check_config, > }; > > static void cdns3_free_all_eps(struct cdns3_device *priv_dev) > diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h > index c5660f2c4293f..fbe4a8e3aa897 100644 > --- a/drivers/usb/cdns3/cdns3-gadget.h > +++ b/drivers/usb/cdns3/cdns3-gadget.h > @@ -562,15 +562,18 @@ struct cdns3_usb_regs { > /* Max burst size (used only in SS mode). */ > #define EP_CFG_MAXBURST_MASK GENMASK(11, 8) > #define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK) > +#define EP_CFG_MAXBURST_MAX 15 > /* ISO max burst. */ > #define EP_CFG_MULT_MASK GENMASK(15, 14) > #define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK) > +#define EP_CFG_MULT_MAX 2 > /* ISO max burst. */ > #define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16) > #define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK) > /* Max number of buffered packets. */ > #define EP_CFG_BUFFERING_MASK GENMASK(31, 27) > #define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK) > +#define EP_CFG_BUFFERING_MAX 15 > > /* EP_CMD - bitmasks */ > /* Endpoint reset. */ > @@ -1094,9 +1097,6 @@ struct cdns3_trb { > #define CDNS3_ENDPOINTS_MAX_COUNT 32 > #define CDNS3_EP_ZLP_BUF_SIZE 1024 > > -#define CDNS3_EP_BUF_SIZE 4 /* KB */ > -#define CDNS3_EP_ISO_HS_MULT 3 > -#define CDNS3_EP_ISO_SS_BURST 3 > #define CDNS3_MAX_NUM_DESCMISS_BUF 32 > #define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */ > #define CDNS3_WA2_NUM_BUFFERS 128 > @@ -1333,6 +1333,9 @@ struct cdns3_device { > /*in KB */ > u16 onchip_buffers; > u16 onchip_used_size; > + > + u16 ep_buf_size; > + u16 ep_iso_burst; > }; > > void cdns3_set_register_bit(void __iomem *ptr, u32 mask); > -- > 2.35.1 >
On Wed, May 4, 2022 at 9:21 PM Peter Chen <peter.chen@kernel.org> wrote: > > On 22-04-27 11:35:25, Frank Li wrote: > > Some devices have USB compositions which may require multiple endpoints. > > To get better performance, need bigger CDNS3_EP_BUF_SIZE. > > > > But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when > > multiple endpoints. > > > > By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. > > > > Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size > > Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into > > ecnds3_device:ep_iso_burst > > typo, and would you please explain usage for ep_iso_burst in your patch? ep_iso_burst just directly replaced old CDNS3_EP_ISO_SS_BURST. This patch uses a simple algorithm to make ep_buf_size equal to ep_iso_burst. using ep_iso_burst reduces code change and keeps old code logic. Keep capability to finial tune ep_iso_burst for ep_buf_size in future for difference composite devices combination user case. > > > > > Using a simple algorithm to calculate ep_buf_size. > > ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + > > 1). > > > > Test at 8qxp: > > > > Gadget ep_buf_size > > > > RNDIS: 5 > > RNDIS+ACM: 3 > > Mass Storage + NCM + ACM 2 > > > > Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because > > exceed FIFO memory. > > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > --- > > Change from v1 to v2: > > Add safe check for mult, buffering and maxburst > > > > drivers/usb/cdns3/cdns3-gadget.c | 50 +++++++++++++++++++++++++++++--- > > drivers/usb/cdns3/cdns3-gadget.h | 9 ++++-- > > 2 files changed, 52 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c > > index 1f3b4a1422126..e25e7a2b55862 100644 > > --- a/drivers/usb/cdns3/cdns3-gadget.c > > +++ b/drivers/usb/cdns3/cdns3-gadget.c > > @@ -2050,7 +2050,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > u8 mult = 0; > > int ret; > > > > - buffering = CDNS3_EP_BUF_SIZE - 1; > > + buffering = priv_dev->ep_buf_size - 1; > > > > cdns3_configure_dmult(priv_dev, priv_ep); > > > > @@ -2069,7 +2069,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > break; > > default: > > ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); > > - mult = CDNS3_EP_ISO_HS_MULT - 1; > > + mult = priv_dev->ep_iso_burst - 1; > > buffering = mult + 1; > > } > > > > @@ -2085,14 +2085,14 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > mult = 0; > > max_packet_size = 1024; > > if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { > > - maxburst = CDNS3_EP_ISO_SS_BURST - 1; > > + maxburst = priv_dev->ep_iso_burst - 1; > > buffering = (mult + 1) * > > (maxburst + 1); > > > > if (priv_ep->interval > 1) > > buffering++; > > } else { > > - maxburst = CDNS3_EP_BUF_SIZE - 1; > > + maxburst = priv_dev->ep_buf_size - 1; > > } > > break; > > default: > > @@ -2136,6 +2136,10 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > ep_cfg |= EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK; > > } > > > > + mult = min_t(u8, mult, EP_CFG_MULT_MAX); > > + buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX); > > + maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX); > > + > > ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | > > EP_CFG_MULT(mult) | > > EP_CFG_BUFFERING(buffering) | > > @@ -2970,6 +2974,43 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) > > return 0; > > } > > > > +/** > > + * cdns3_gadget_check_config - ensure cdns3 can support the USB configuration > > + * @gadget: pointer to the USB gadget > > + * > > + * Used to record the maximum number of endpoints being used in a USB composite > > + * device. (across all configurations) This is to be used in the calculation > > + * of the TXFIFO sizes when resizing internal memory for individual endpoints. > > + * It will help ensured that the resizing logic reserves enough space for at > > + * least one max packet. > > + */ > > +static int cdns3_gadget_check_config(struct usb_gadget *gadget) > > +{ > > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); > > + struct usb_ep *ep; > > + int n_in = 0; > > + int total; > > + > > + list_for_each_entry(ep, &gadget->ep_list, ep_list) { > > + if (ep->claimed && (ep->address & USB_DIR_IN)) > > + n_in++; > > + } > > + > > + priv_dev->ep_buf_size = 1; > > + priv_dev->ep_iso_burst = 1; > > You will re-calculate above variables below, why need to initialize them? I worry about it is 0 or other random data at below error return branch. Anyway, it should be okay to remove it. > > Peter > > + > > + /* 2KB are reserved for EP0, 1KB for out*/ > > + total = 2 + n_in + 1; > > + > > + if (total > priv_dev->onchip_buffers) > > + return -ENOMEM; > > + > > + priv_dev->ep_buf_size = priv_dev->ep_iso_burst = > > + (priv_dev->onchip_buffers - 2) / (n_in + 1); > > + > > + return 0; > > +} > > + > > static const struct usb_gadget_ops cdns3_gadget_ops = { > > .get_frame = cdns3_gadget_get_frame, > > .wakeup = cdns3_gadget_wakeup, > > @@ -2978,6 +3019,7 @@ static const struct usb_gadget_ops cdns3_gadget_ops = { > > .udc_start = cdns3_gadget_udc_start, > > .udc_stop = cdns3_gadget_udc_stop, > > .match_ep = cdns3_gadget_match_ep, > > + .check_config = cdns3_gadget_check_config, > > }; > > > > static void cdns3_free_all_eps(struct cdns3_device *priv_dev) > > diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h > > index c5660f2c4293f..fbe4a8e3aa897 100644 > > --- a/drivers/usb/cdns3/cdns3-gadget.h > > +++ b/drivers/usb/cdns3/cdns3-gadget.h > > @@ -562,15 +562,18 @@ struct cdns3_usb_regs { > > /* Max burst size (used only in SS mode). */ > > #define EP_CFG_MAXBURST_MASK GENMASK(11, 8) > > #define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK) > > +#define EP_CFG_MAXBURST_MAX 15 > > /* ISO max burst. */ > > #define EP_CFG_MULT_MASK GENMASK(15, 14) > > #define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK) > > +#define EP_CFG_MULT_MAX 2 > > /* ISO max burst. */ > > #define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16) > > #define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK) > > /* Max number of buffered packets. */ > > #define EP_CFG_BUFFERING_MASK GENMASK(31, 27) > > #define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK) > > +#define EP_CFG_BUFFERING_MAX 15 > > > > /* EP_CMD - bitmasks */ > > /* Endpoint reset. */ > > @@ -1094,9 +1097,6 @@ struct cdns3_trb { > > #define CDNS3_ENDPOINTS_MAX_COUNT 32 > > #define CDNS3_EP_ZLP_BUF_SIZE 1024 > > > > -#define CDNS3_EP_BUF_SIZE 4 /* KB */ > > -#define CDNS3_EP_ISO_HS_MULT 3 > > -#define CDNS3_EP_ISO_SS_BURST 3 > > #define CDNS3_MAX_NUM_DESCMISS_BUF 32 > > #define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */ > > #define CDNS3_WA2_NUM_BUFFERS 128 > > @@ -1333,6 +1333,9 @@ struct cdns3_device { > > /*in KB */ > > u16 onchip_buffers; > > u16 onchip_used_size; > > + > > + u16 ep_buf_size; > > + u16 ep_iso_burst; > > }; > > > > void cdns3_set_register_bit(void __iomem *ptr, u32 mask); > > -- > > 2.35.1 > > > > -- > > Thanks, > Peter Chen >
On Wed, Apr 27, 2022 at 12:03:22PM -0500, Zhi Li wrote: > On Wed, Apr 27, 2022 at 11:57 AM Greg KH <gregkh@linuxfoundation.org> wrote: > > > > On Wed, Apr 27, 2022 at 11:35:25AM -0500, Frank Li wrote: > > > Some devices have USB compositions which may require multiple endpoints. > > > To get better performance, need bigger CDNS3_EP_BUF_SIZE. > > > > > > But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when > > > multiple endpoints. > > > > > > By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. > > > > > > Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size > > > Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into > > > ecnds3_device:ep_iso_burst > > > > > > Using a simple algorithm to calculate ep_buf_size. > > > ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + > > > 1). > > > > > > Test at 8qxp: > > > > > > Gadget ep_buf_size > > > > > > RNDIS: 5 > > > RNDIS+ACM: 3 > > > Mass Storage + NCM + ACM 2 > > > > > > Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because > > > exceed FIFO memory. > > > > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > > --- > > > Change from v1 to v2: > > > Add safe check for mult, buffering and maxburst > > > > that's nice, but this is v8, not v2? > > Sorry, It should be v2. I made a mistake with the title. Ok, the next version needs to be 9 to keep everything from getting really confused. thanks, greg k-h
On 22-05-05 10:24:12, Zhi Li wrote: > On Wed, May 4, 2022 at 9:21 PM Peter Chen <peter.chen@kernel.org> wrote: > > > > On 22-04-27 11:35:25, Frank Li wrote: > > > Some devices have USB compositions which may require multiple endpoints. > > > To get better performance, need bigger CDNS3_EP_BUF_SIZE. > > > > > > But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when > > > multiple endpoints. > > > > > > By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. > > > > > > Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size > > > Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into > > > ecnds3_device:ep_iso_burst > > > > typo, and would you please explain usage for ep_iso_burst in your patch? > > ep_iso_burst just directly replaced old CDNS3_EP_ISO_SS_BURST. > > This patch uses a simple algorithm to make ep_buf_size equal to ep_iso_burst. > > using ep_iso_burst reduces code change and keeps old code logic. > Keep capability to finial tune ep_iso_burst for ep_buf_size in future > for difference > composite devices combination user case. > > > > > > > > > Using a simple algorithm to calculate ep_buf_size. > > > ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + > > > 1). > > > > > > Test at 8qxp: > > > > > > Gadget ep_buf_size > > > > > > RNDIS: 5 > > > RNDIS+ACM: 3 > > > Mass Storage + NCM + ACM 2 > > > > > > Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because > > > exceed FIFO memory. > > > > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > > --- > > > Change from v1 to v2: > > > Add safe check for mult, buffering and maxburst > > > > > > drivers/usb/cdns3/cdns3-gadget.c | 50 +++++++++++++++++++++++++++++--- > > > drivers/usb/cdns3/cdns3-gadget.h | 9 ++++-- > > > 2 files changed, 52 insertions(+), 7 deletions(-) > > > > > > diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c > > > index 1f3b4a1422126..e25e7a2b55862 100644 > > > --- a/drivers/usb/cdns3/cdns3-gadget.c > > > +++ b/drivers/usb/cdns3/cdns3-gadget.c > > > @@ -2050,7 +2050,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > > u8 mult = 0; > > > int ret; > > > > > > - buffering = CDNS3_EP_BUF_SIZE - 1; > > > + buffering = priv_dev->ep_buf_size - 1; > > > > > > cdns3_configure_dmult(priv_dev, priv_ep); > > > > > > @@ -2069,7 +2069,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > > break; > > > default: > > > ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); > > > - mult = CDNS3_EP_ISO_HS_MULT - 1; > > > + mult = priv_dev->ep_iso_burst - 1; > > > buffering = mult + 1; > > > } > > > > > > @@ -2085,14 +2085,14 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > > mult = 0; > > > max_packet_size = 1024; > > > if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { > > > - maxburst = CDNS3_EP_ISO_SS_BURST - 1; > > > + maxburst = priv_dev->ep_iso_burst - 1; > > > buffering = (mult + 1) * > > > (maxburst + 1); > > > > > > if (priv_ep->interval > 1) > > > buffering++; > > > } else { > > > - maxburst = CDNS3_EP_BUF_SIZE - 1; > > > + maxburst = priv_dev->ep_buf_size - 1; > > > } > > > break; > > > default: > > > @@ -2136,6 +2136,10 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) > > > ep_cfg |= EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK; > > > } > > > > > > + mult = min_t(u8, mult, EP_CFG_MULT_MAX); > > > + buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX); > > > + maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX); These compare need to move above to keep variable "buffering" calculation correctly. > > > + > > > ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | > > > EP_CFG_MULT(mult) | > > > EP_CFG_BUFFERING(buffering) | > > > @@ -2970,6 +2974,43 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) > > > return 0; > > > } > > > > > > +/** > > > + * cdns3_gadget_check_config - ensure cdns3 can support the USB configuration > > > + * @gadget: pointer to the USB gadget > > > + * > > > + * Used to record the maximum number of endpoints being used in a USB composite > > > + * device. (across all configurations) This is to be used in the calculation > > > + * of the TXFIFO sizes when resizing internal memory for individual endpoints. > > > + * It will help ensured that the resizing logic reserves enough space for at > > > + * least one max packet. > > > + */ > > > +static int cdns3_gadget_check_config(struct usb_gadget *gadget) > > > +{ > > > + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); > > > + struct usb_ep *ep; > > > + int n_in = 0; > > > + int total; > > > + > > > + list_for_each_entry(ep, &gadget->ep_list, ep_list) { > > > + if (ep->claimed && (ep->address & USB_DIR_IN)) > > > + n_in++; > > > + } > > > + > > > + priv_dev->ep_buf_size = 1; > > > + priv_dev->ep_iso_burst = 1; > > > > You will re-calculate above variables below, why need to initialize them? > > I worry about it is 0 or other random data at below error return branch. > Anyway, it should be okay to remove it. If it is failed, the .bind will fail, so it is okay to remove these. Other parts are okay for me. Peter > > > > > Peter > > > + > > > + /* 2KB are reserved for EP0, 1KB for out*/ > > > + total = 2 + n_in + 1; > > > + > > > + if (total > priv_dev->onchip_buffers) > > > + return -ENOMEM; > > > + > > > + priv_dev->ep_buf_size = priv_dev->ep_iso_burst = > > > + (priv_dev->onchip_buffers - 2) / (n_in + 1); > > > + > > > + return 0; > > > +} > > > + > > > static const struct usb_gadget_ops cdns3_gadget_ops = { > > > .get_frame = cdns3_gadget_get_frame, > > > .wakeup = cdns3_gadget_wakeup, > > > @@ -2978,6 +3019,7 @@ static const struct usb_gadget_ops cdns3_gadget_ops = { > > > .udc_start = cdns3_gadget_udc_start, > > > .udc_stop = cdns3_gadget_udc_stop, > > > .match_ep = cdns3_gadget_match_ep, > > > + .check_config = cdns3_gadget_check_config, > > > }; > > > > > > static void cdns3_free_all_eps(struct cdns3_device *priv_dev) > > > diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h > > > index c5660f2c4293f..fbe4a8e3aa897 100644 > > > --- a/drivers/usb/cdns3/cdns3-gadget.h > > > +++ b/drivers/usb/cdns3/cdns3-gadget.h > > > @@ -562,15 +562,18 @@ struct cdns3_usb_regs { > > > /* Max burst size (used only in SS mode). */ > > > #define EP_CFG_MAXBURST_MASK GENMASK(11, 8) > > > #define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK) > > > +#define EP_CFG_MAXBURST_MAX 15 > > > /* ISO max burst. */ > > > #define EP_CFG_MULT_MASK GENMASK(15, 14) > > > #define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK) > > > +#define EP_CFG_MULT_MAX 2 > > > /* ISO max burst. */ > > > #define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16) > > > #define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK) > > > /* Max number of buffered packets. */ > > > #define EP_CFG_BUFFERING_MASK GENMASK(31, 27) > > > #define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK) > > > +#define EP_CFG_BUFFERING_MAX 15 > > > > > > /* EP_CMD - bitmasks */ > > > /* Endpoint reset. */ > > > @@ -1094,9 +1097,6 @@ struct cdns3_trb { > > > #define CDNS3_ENDPOINTS_MAX_COUNT 32 > > > #define CDNS3_EP_ZLP_BUF_SIZE 1024 > > > > > > -#define CDNS3_EP_BUF_SIZE 4 /* KB */ > > > -#define CDNS3_EP_ISO_HS_MULT 3 > > > -#define CDNS3_EP_ISO_SS_BURST 3 > > > #define CDNS3_MAX_NUM_DESCMISS_BUF 32 > > > #define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */ > > > #define CDNS3_WA2_NUM_BUFFERS 128 > > > @@ -1333,6 +1333,9 @@ struct cdns3_device { > > > /*in KB */ > > > u16 onchip_buffers; > > > u16 onchip_used_size; > > > + > > > + u16 ep_buf_size; > > > + u16 ep_iso_burst; > > > }; > > > > > > void cdns3_set_register_bit(void __iomem *ptr, u32 mask); > > > -- > > > 2.35.1 > > > > > > > -- > > > > Thanks, > > Peter Chen > >
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 1f3b4a1422126..e25e7a2b55862 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2050,7 +2050,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) u8 mult = 0; int ret; - buffering = CDNS3_EP_BUF_SIZE - 1; + buffering = priv_dev->ep_buf_size - 1; cdns3_configure_dmult(priv_dev, priv_ep); @@ -2069,7 +2069,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) break; default: ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); - mult = CDNS3_EP_ISO_HS_MULT - 1; + mult = priv_dev->ep_iso_burst - 1; buffering = mult + 1; } @@ -2085,14 +2085,14 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) mult = 0; max_packet_size = 1024; if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { - maxburst = CDNS3_EP_ISO_SS_BURST - 1; + maxburst = priv_dev->ep_iso_burst - 1; buffering = (mult + 1) * (maxburst + 1); if (priv_ep->interval > 1) buffering++; } else { - maxburst = CDNS3_EP_BUF_SIZE - 1; + maxburst = priv_dev->ep_buf_size - 1; } break; default: @@ -2136,6 +2136,10 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) ep_cfg |= EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK; } + mult = min_t(u8, mult, EP_CFG_MULT_MAX); + buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX); + maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX); + ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | EP_CFG_MULT(mult) | EP_CFG_BUFFERING(buffering) | @@ -2970,6 +2974,43 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) return 0; } +/** + * cdns3_gadget_check_config - ensure cdns3 can support the USB configuration + * @gadget: pointer to the USB gadget + * + * Used to record the maximum number of endpoints being used in a USB composite + * device. (across all configurations) This is to be used in the calculation + * of the TXFIFO sizes when resizing internal memory for individual endpoints. + * It will help ensured that the resizing logic reserves enough space for at + * least one max packet. + */ +static int cdns3_gadget_check_config(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + struct usb_ep *ep; + int n_in = 0; + int total; + + list_for_each_entry(ep, &gadget->ep_list, ep_list) { + if (ep->claimed && (ep->address & USB_DIR_IN)) + n_in++; + } + + priv_dev->ep_buf_size = 1; + priv_dev->ep_iso_burst = 1; + + /* 2KB are reserved for EP0, 1KB for out*/ + total = 2 + n_in + 1; + + if (total > priv_dev->onchip_buffers) + return -ENOMEM; + + priv_dev->ep_buf_size = priv_dev->ep_iso_burst = + (priv_dev->onchip_buffers - 2) / (n_in + 1); + + return 0; +} + static const struct usb_gadget_ops cdns3_gadget_ops = { .get_frame = cdns3_gadget_get_frame, .wakeup = cdns3_gadget_wakeup, @@ -2978,6 +3019,7 @@ static const struct usb_gadget_ops cdns3_gadget_ops = { .udc_start = cdns3_gadget_udc_start, .udc_stop = cdns3_gadget_udc_stop, .match_ep = cdns3_gadget_match_ep, + .check_config = cdns3_gadget_check_config, }; static void cdns3_free_all_eps(struct cdns3_device *priv_dev) diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h index c5660f2c4293f..fbe4a8e3aa897 100644 --- a/drivers/usb/cdns3/cdns3-gadget.h +++ b/drivers/usb/cdns3/cdns3-gadget.h @@ -562,15 +562,18 @@ struct cdns3_usb_regs { /* Max burst size (used only in SS mode). */ #define EP_CFG_MAXBURST_MASK GENMASK(11, 8) #define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK) +#define EP_CFG_MAXBURST_MAX 15 /* ISO max burst. */ #define EP_CFG_MULT_MASK GENMASK(15, 14) #define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK) +#define EP_CFG_MULT_MAX 2 /* ISO max burst. */ #define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16) #define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK) /* Max number of buffered packets. */ #define EP_CFG_BUFFERING_MASK GENMASK(31, 27) #define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK) +#define EP_CFG_BUFFERING_MAX 15 /* EP_CMD - bitmasks */ /* Endpoint reset. */ @@ -1094,9 +1097,6 @@ struct cdns3_trb { #define CDNS3_ENDPOINTS_MAX_COUNT 32 #define CDNS3_EP_ZLP_BUF_SIZE 1024 -#define CDNS3_EP_BUF_SIZE 4 /* KB */ -#define CDNS3_EP_ISO_HS_MULT 3 -#define CDNS3_EP_ISO_SS_BURST 3 #define CDNS3_MAX_NUM_DESCMISS_BUF 32 #define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */ #define CDNS3_WA2_NUM_BUFFERS 128 @@ -1333,6 +1333,9 @@ struct cdns3_device { /*in KB */ u16 onchip_buffers; u16 onchip_used_size; + + u16 ep_buf_size; + u16 ep_iso_burst; }; void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
Some devices have USB compositions which may require multiple endpoints. To get better performance, need bigger CDNS3_EP_BUF_SIZE. But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when multiple endpoints. By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into ecnds3_device:ep_iso_burst Using a simple algorithm to calculate ep_buf_size. ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + 1). Test at 8qxp: Gadget ep_buf_size RNDIS: 5 RNDIS+ACM: 3 Mass Storage + NCM + ACM 2 Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because exceed FIFO memory. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Change from v1 to v2: Add safe check for mult, buffering and maxburst drivers/usb/cdns3/cdns3-gadget.c | 50 +++++++++++++++++++++++++++++--- drivers/usb/cdns3/cdns3-gadget.h | 9 ++++-- 2 files changed, 52 insertions(+), 7 deletions(-)