diff mbox series

[v0.5,1/9] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX

Message ID 20220506181034.2001548-2-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series i.MX8MP HDMI support | expand

Commit Message

Lucas Stach May 6, 2022, 6:10 p.m. UTC 
The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
core with a little bit of SoC integration around it.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml

Comments

Rob Herring May 6, 2022, 10:39 p.m. UTC | #1 
On Fri, 06 May 2022 20:10:26 +0200, Lucas Stach wrote:
> The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
> core with a little bit of SoC integration around it.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dts:36.45-46 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1401: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Marek Vasut May 9, 2022, 12:55 a.m. UTC | #2 
On 5/6/22 20:10, Lucas Stach wrote:
> The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
> core with a little bit of SoC integration around it.

You can add

Tested-by: Marek Vasut <marex@denx.de>

to the entire series.
Rob Herring May 10, 2022, 6:12 p.m. UTC | #3 
On Fri, May 06, 2022 at 08:10:26PM +0200, Lucas Stach wrote:
> The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
> core with a little bit of SoC integration around it.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  .../bindings/display/imx/fsl,imx8mp-hdmi.yaml | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml
> new file mode 100644
> index 000000000000..bd9a2b135176
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8MP DWC HDMI TX Encoder
> +
> +maintainers:
> +  - Lucas Stach <l.stach@pengutronix.de>
> +
> +description: |
> +  The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP.
> +
> +allOf:
> +  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mp-hdmi
> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-io-width:
> +    const: 1
> +
> +  clocks:
> +    maxItems: 5
> +
> +  clock-names:
> +    items:
> +      - {}
> +      - {}
> +      - const: cec
> +      - const: pix
> +      - const: fdcc 
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +    #include <dt-bindings/power/imx8mp-power.h>
> +
> +    hdmi@32fd8000 {
> +        compatible = "fsl,imx8mp-hdmi";
> +        reg = <0x32fd8000 0x7eff>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> +                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
> +                 <&clk IMX8MP_CLK_32K>,
> +                 <&hdmi_tx_phy>;
> +        clock-names = "iahb", "isfr", "cec", "pix";

The schema says there are 5 entries.

> +        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
> +        reg-io-width = <1>;
> +    };
> -- 
> 2.30.2
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml
new file mode 100644
index 000000000000..bd9a2b135176
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP.
+
+allOf:
+  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - {}
+      - {}
+      - const: cec
+      - const: pix
+      - const: fdcc 
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+    };