diff mbox series

[v2] drivers: cpufreq: sun8i-r40: Add cpufreq support

Message ID 20220510003611.1812-1-qianfanguijin@163.com (mailing list archive)
State New, archived
Delegated to: viresh kumar
Headers show
Series [v2] drivers: cpufreq: sun8i-r40: Add cpufreq support | expand

Commit Message

qianfan May 10, 2022, 12:36 a.m. UTC
From: qianfan Zhao <qianfanguijin@163.com>

OPP table value is get from allwinner lichee 3.10 kernel.
And completed 'cpu-supply' on sun8i based board.

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
---
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |  4 ++
 arch/arm/boot/dts/sun8i-r40-feta40i.dtsi      |  4 ++
 arch/arm/boot/dts/sun8i-r40.dtsi              | 47 +++++++++++++++++++
 arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts      |  4 ++
 .../boot/dts/sun8i-v40-bananapi-m2-berry.dts  |  4 ++
 drivers/cpufreq/cpufreq-dt-platdev.c          |  1 +
 6 files changed, 64 insertions(+)

Comments

Jernej Škrabec May 11, 2022, 8:13 p.m. UTC | #1
Dne torek, 10. maj 2022 ob 02:36:11 CEST je qianfanguijin@163.com napisal(a):
> From: qianfan Zhao <qianfanguijin@163.com>
> 
> OPP table value is get from allwinner lichee 3.10 kernel.
> And completed 'cpu-supply' on sun8i based board.
> 
> Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
> ---
>  .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |  4 ++
>  arch/arm/boot/dts/sun8i-r40-feta40i.dtsi      |  4 ++
>  arch/arm/boot/dts/sun8i-r40.dtsi              | 47 +++++++++++++++++++
>  arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts      |  4 ++
>  .../boot/dts/sun8i-v40-bananapi-m2-berry.dts  |  4 ++
>  drivers/cpufreq/cpufreq-dt-platdev.c          |  1 +

This patch needs to be split in two:
1. driver change
2. DT changes

And please add change log here for next submission.

>  6 files changed, 64 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/
boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> index a6a1087a0c9b..4f30018ec4a2 100644
> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> @@ -113,6 +113,10 @@ &ahci {
>  	status = "okay";
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &de {
>  	status = "okay";
>  };
> diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/
sun8i-r40-feta40i.dtsi
> index 265e0fa57a32..b872b51a346d 100644
> --- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
> +++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
> @@ -6,6 +6,10 @@
>  
>  #include "sun8i-r40.dtsi"
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &i2c0 {
>  	status = "okay";
>  
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-
r40.dtsi
> index 291f4784e86c..90de119095fa 100644
> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -54,6 +54,41 @@ / {
>  	#size-cells = <1>;
>  	interrupt-parent = <&gic>;
>  
> +	cpu0_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-720000000 {
> +			opp-hz = /bits/ 64 <720000000>;
> +			opp-microvolt = <1000000 1000000 1300000>;
> +			clock-latency-ns = <2000000>;
> +		};
> +
> +		opp-912000000 {
> +			opp-hz = /bits/ 64 <912000000>;
> +			opp-microvolt = <1100000 1100000 1300000>;
> +			clock-latency-ns = <2000000>;
> +		};
> +
> +		opp-1008000000 {
> +			opp-hz = /bits/ 64 <1008000000>;
> +			opp-microvolt = <1160000 1160000 1300000>;
> +			clock-latency-ns = <2000000>;
> +		};
> +
> +		opp-1104000000 {
> +			opp-hz = /bits/ 64 <1104000000>;
> +			opp-microvolt = <1240000 1240000 1300000>;
> +			clock-latency-ns = <2000000>;
> +		};
> +
> +		opp-1200000000 {
> +			opp-hz = /bits/ 64 <1200000000>;
> +			opp-microvolt = <1300000 1300000 1300000>;
> +			clock-latency-ns = <2000000>;
> +		};
> +	};
> +
>  	clocks {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> @@ -84,24 +119,36 @@ cpu0: cpu@0 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <0>;
> +			clocks = <&ccu CLK_CPU>;
> +			clock-names = "cpu";
> +			operating-points-v2 = <&cpu0_opp_table>;
>  		};
>  
>  		cpu1: cpu@1 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <1>;
> +			clocks = <&ccu CLK_CPU>;
> +			clock-names = "cpu";
> +			operating-points-v2 = <&cpu0_opp_table>;
>  		};
>  
>  		cpu2: cpu@2 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <2>;
> +			clocks = <&ccu CLK_CPU>;
> +			clock-names = "cpu";
> +			operating-points-v2 = <&cpu0_opp_table>;
>  		};
>  
>  		cpu3: cpu@3 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <3>;
> +			clocks = <&ccu CLK_CPU>;
> +			clock-names = "cpu";
> +			operating-points-v2 = <&cpu0_opp_table>;
>  		};
>  	};
>  
> diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/
sun8i-t3-cqa3t-bv3.dts
> index 6931aaab2382..0eb1990742ff 100644
> --- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
> +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
> @@ -88,6 +88,10 @@ &ahci {
>  	status = "okay";
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &de {
>  	status = "okay";
>  };
> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/
boot/dts/sun8i-v40-bananapi-m2-berry.dts
> index 47954551f573..fdf8bd12faaa 100644
> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> @@ -107,6 +107,10 @@ &ahci {
>  	status = "okay";
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &de {
>  	status = "okay";
>  };
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-
dt-platdev.c
> index ca1d103ec449..971a99219d4d 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -26,6 +26,7 @@ static const struct of_device_id allowlist[] __initconst = 
{
>  	{ .compatible = "allwinner,sun8i-a23", },
>  	{ .compatible = "allwinner,sun8i-a83t", },
>  	{ .compatible = "allwinner,sun8i-h3", },
> +	{ .compatible = "allwinner,sun8i-r40", },

Why on allow list? Comment says operatings-point-v2 should be on block list, 
just like H6.

Best regards,
Jernej

>  
>  	{ .compatible = "apm,xgene-shadowcat", },
>  
> -- 
> 2.25.1
> 
>
qianfan May 12, 2022, 4:34 a.m. UTC | #2
在 2022/5/12 4:13, Jernej Škrabec 写道:
> Dne torek, 10. maj 2022 ob 02:36:11 CEST je qianfanguijin@163.com napisal(a):
>> From: qianfan Zhao <qianfanguijin@163.com>
>>
>> OPP table value is get from allwinner lichee 3.10 kernel.
>> And completed 'cpu-supply' on sun8i based board.
>>
>> Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
>> ---
>>   .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |  4 ++
>>   arch/arm/boot/dts/sun8i-r40-feta40i.dtsi      |  4 ++
>>   arch/arm/boot/dts/sun8i-r40.dtsi              | 47 +++++++++++++++++++
>>   arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts      |  4 ++
>>   .../boot/dts/sun8i-v40-bananapi-m2-berry.dts  |  4 ++
>>   drivers/cpufreq/cpufreq-dt-platdev.c          |  1 +
> This patch needs to be split in two:
> 1. driver change
> 2. DT changes
>
> And please add change log here for next submission.
Maybe there patch is better? one of driver, one of sun8i-r40.dtsi
and the others is the board's changes.
>
>>   6 files changed, 64 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/
> boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> index a6a1087a0c9b..4f30018ec4a2 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> @@ -113,6 +113,10 @@ &ahci {
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &de {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/
> sun8i-r40-feta40i.dtsi
>> index 265e0fa57a32..b872b51a346d 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
>> @@ -6,6 +6,10 @@
>>   
>>   #include "sun8i-r40.dtsi"
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &i2c0 {
>>   	status = "okay";
>>   
>> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-
> r40.dtsi
>> index 291f4784e86c..90de119095fa 100644
>> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
>> @@ -54,6 +54,41 @@ / {
>>   	#size-cells = <1>;
>>   	interrupt-parent = <&gic>;
>>   
>> +	cpu0_opp_table: opp_table0 {
>> +		compatible = "operating-points-v2";
>> +		opp-shared;
>> +
>> +		opp-720000000 {
>> +			opp-hz = /bits/ 64 <720000000>;
>> +			opp-microvolt = <1000000 1000000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-912000000 {
>> +			opp-hz = /bits/ 64 <912000000>;
>> +			opp-microvolt = <1100000 1100000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-1008000000 {
>> +			opp-hz = /bits/ 64 <1008000000>;
>> +			opp-microvolt = <1160000 1160000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-1104000000 {
>> +			opp-hz = /bits/ 64 <1104000000>;
>> +			opp-microvolt = <1240000 1240000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-1200000000 {
>> +			opp-hz = /bits/ 64 <1200000000>;
>> +			opp-microvolt = <1300000 1300000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +	};
>> +
>>   	clocks {
>>   		#address-cells = <1>;
>>   		#size-cells = <1>;
>> @@ -84,24 +119,36 @@ cpu0: cpu@0 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <0>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   
>>   		cpu1: cpu@1 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <1>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   
>>   		cpu2: cpu@2 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <2>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   
>>   		cpu3: cpu@3 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <3>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   	};
>>   
>> diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/
> sun8i-t3-cqa3t-bv3.dts
>> index 6931aaab2382..0eb1990742ff 100644
>> --- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
>> +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
>> @@ -88,6 +88,10 @@ &ahci {
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &de {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/
> boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> index 47954551f573..fdf8bd12faaa 100644
>> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> @@ -107,6 +107,10 @@ &ahci {
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &de {
>>   	status = "okay";
>>   };
>> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-
> dt-platdev.c
>> index ca1d103ec449..971a99219d4d 100644
>> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
>> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
>> @@ -26,6 +26,7 @@ static const struct of_device_id allowlist[] __initconst =
> {
>>   	{ .compatible = "allwinner,sun8i-a23", },
>>   	{ .compatible = "allwinner,sun8i-a83t", },
>>   	{ .compatible = "allwinner,sun8i-h3", },
>> +	{ .compatible = "allwinner,sun8i-r40", },
> Why on allow list? Comment says operatings-point-v2 should be on block list,
> just like H6.
Actually I'm not make sure the difference, seems both of them can work.
Most of allwinner device_id is added in allowlist, so I did this.
>
> Best regards,
> Jernej
>
>>   
>>   	{ .compatible = "apm,xgene-shadowcat", },
>>   
>> -- 
>> 2.25.1
>>
>>
Viresh Kumar May 12, 2022, 4:58 a.m. UTC | #3
On 12-05-22, 12:34, qianfan wrote:
> Actually I'm not make sure the difference, seems both of them can work.
> Most of allwinner device_id is added in allowlist, so I did this.

For OPP V1 the cpufreq device isn't created by default and hence the allowlist
allows us to know the devices for which the device shall be created.

For OPP V2, we have the compatible string available and with help of that we
create a device without need of any entry to any list. The blocklist however
allows us to skip creating the device for some platforms, which don't want it.

As your case is opp-v2 and you want the device, you aren't required to add entry
anywhere.
qianfan May 12, 2022, 6:22 a.m. UTC | #4
在 2022/5/12 12:58, Viresh Kumar 写道:
> On 12-05-22, 12:34, qianfan wrote:
>> Actually I'm not make sure the difference, seems both of them can work.
>> Most of allwinner device_id is added in allowlist, so I did this.
> For OPP V1 the cpufreq device isn't created by default and hence the allowlist
> allows us to know the devices for which the device shall be created.
>
> For OPP V2, we have the compatible string available and with help of that we
> create a device without need of any entry to any list. The blocklist however
> allows us to skip creating the device for some platforms, which don't want it.
>
> As your case is opp-v2 and you want the device, you aren't required to add entry
> anywhere.
I read the source code again and understand the behaivors.
And I will it from allowlist.

Thanks
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index a6a1087a0c9b..4f30018ec4a2 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -113,6 +113,10 @@  &ahci {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
index 265e0fa57a32..b872b51a346d 100644
--- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
@@ -6,6 +6,10 @@ 
 
 #include "sun8i-r40.dtsi"
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 291f4784e86c..90de119095fa 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -54,6 +54,41 @@  / {
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -84,24 +119,36 @@  cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
index 6931aaab2382..0eb1990742ff 100644
--- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
+++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
@@ -88,6 +88,10 @@  &ahci {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 47954551f573..fdf8bd12faaa 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -107,6 +107,10 @@  &ahci {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index ca1d103ec449..971a99219d4d 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -26,6 +26,7 @@  static const struct of_device_id allowlist[] __initconst = {
 	{ .compatible = "allwinner,sun8i-a23", },
 	{ .compatible = "allwinner,sun8i-a83t", },
 	{ .compatible = "allwinner,sun8i-h3", },
+	{ .compatible = "allwinner,sun8i-r40", },
 
 	{ .compatible = "apm,xgene-shadowcat", },