[GIT,PULL] SCSI fixes for 5.18-rc6

Commit Message

James Bottomley May 13, 2022, 6:58 p.m. UTC

Four fixes, all in drivers.  These patches mosly fix error legs and
exceptional conditions (scsi_dh_alua, qla2xxx).  The lpfc fixes are for
coding issues with lpfc features.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Brian Bunker (1):
      scsi: scsi_dh_alua: Properly handle the ALUA transitioning state

Gleb Chesnokov (1):
      scsi: qla2xxx: Fix missed DMA unmap for aborted commands

James Smart (2):
      scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
      scsi: lpfc: Fix split code for FLOGI on FCoE

And the diffstat:

 drivers/scsi/device_handler/scsi_dh_alua.c | 3 +--
 drivers/scsi/lpfc/lpfc_els.c               | 2 +-
 drivers/scsi/lpfc/lpfc_sli.c               | 6 +++---
 drivers/scsi/qla2xxx/qla_target.c          | 3 +++
 4 files changed, 8 insertions(+), 6 deletions(-)

With full diff below.

James

---

Comments

[e-mail] May 13, 2022, 8:27 p.m. UTC | #1

The pull request you sent on Fri, 13 May 2022 14:58:20 -0400:

> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/f2dd007445b1d4c0581d0292f85fdd5b47387776

Thank you!

Patch

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 37d06f993b76..1d9be771f3ee 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1172,9 +1172,8 @@  static blk_status_t alua_prep_fn(struct scsi_device *sdev, struct request *req)
 	case SCSI_ACCESS_STATE_OPTIMAL:
 	case SCSI_ACCESS_STATE_ACTIVE:
 	case SCSI_ACCESS_STATE_LBA:
-		return BLK_STS_OK;
 	case SCSI_ACCESS_STATE_TRANSITIONING:
-		return BLK_STS_AGAIN;
+		return BLK_STS_OK;
 	default:
 		req->rq_flags |= RQF_QUIET;
 		return BLK_STS_IOERR;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ef6e8cd8c26a..872a26376ccb 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1330,7 +1330,7 @@  lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
 		    LPFC_SLI_INTF_IF_TYPE_0) {
 			/* FLOGI needs to be 3 for WQE FCFI */
-			ct = ((SLI4_CT_FCFI >> 1) & 1) | (SLI4_CT_FCFI & 1);
+			ct = SLI4_CT_FCFI;
 			bf_set(wqe_ct, &wqe->els_req.wqe_com, ct);
 
 			/* Set the fcfi to the fcfi we registered with */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index bda2a7ba4e77..6adaf79e67cc 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -10720,10 +10720,10 @@  __lpfc_sli_prep_gen_req_s4(struct lpfc_iocbq *cmdiocbq, struct lpfc_dmabuf *bmp,
 
 	/* Words 0 - 2 */
 	bde = (struct ulp_bde64_le *)&cmdwqe->generic.bde;
-	bde->addr_low = cpu_to_le32(putPaddrLow(bmp->phys));
-	bde->addr_high = cpu_to_le32(putPaddrHigh(bmp->phys));
+	bde->addr_low = bpl->addr_low;
+	bde->addr_high = bpl->addr_high;
 	bde->type_size = cpu_to_le32(xmit_len);
-	bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BLP_64);
+	bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BDE_64);
 
 	/* Word 3 */
 	cmdwqe->gen_req.request_payload_len = xmit_len;
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 85dbf81f3204..6dfcfd8e7337 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3826,6 +3826,9 @@  int qlt_abort_cmd(struct qla_tgt_cmd *cmd)
 
 	spin_lock_irqsave(&cmd->cmd_lock, flags);
 	if (cmd->aborted) {
+		if (cmd->sg_mapped)
+			qlt_unmap_sg(vha, cmd);
+
 		spin_unlock_irqrestore(&cmd->cmd_lock, flags);
 		/*
 		 * It's normal to see 2 calls in this path: